Tampere University of Technology

TUTCRIS Research Portal

Data used in the paper: A compact constitutive model to describe the viscoelastic-plastic behaviour of glassy polymers: Comparison with monotonic and cyclic experiments and state-of-the-art models. Int. J Plasticity (2019).

Dataset

Description

Tests were conducted at Univ. Bourgogne Franche-Comte, FEMTO-ST Institute, Department of Applied Mechanics, Besancon, France. The tests were conducted under isothermal conditions at room temperature when the frequency of 5 Hz and stress ratio of 0.5 were applied (for a PC -polymer). The elongation of dumbbell -shaped PC-specimens versus the applied force F was measured. The elongation was measured by an extensometer. The stress was defined by F/A, where the area of the initial cross section (gauge section) is given by A. Hysteresis loops given in the paper are based on this stress vs strain -data.
Date made available18 Aug 2019
PublisherTampere University of Technology
Date of data production18 Aug 2019

ID: 19885658