Tampere University of Technology

TUTCRIS Research Portal

Department of Intelligent Hydraulics and Automation

Research unit: Department

  1. 2012
  2. Opponent of Dissertation: Väitöskirjan vastaväittäjä: Manninen, T., Fault simulator and detection for a process control valve

    Jouni Mattila (Examiner)
    30 Nov 2012

    Activity: ExaminationPre-examination of dissertation or acting as opponent to doctoral students

  3. Opponent of Dissertation: Vastaväittäjä: Timo Manninen , Fault simulator and detection for a process control valve

    Kari Koskinen (Examiner)
    30 Nov 2012

    Activity: ExaminationPre-examination of dissertation or acting as opponent to doctoral students

  4. A Potential Field and Bug Compound Navigation Algorithm for Nonholonomic Wheeled Robots

    Ji Wung Choi (Speaker)
    2012

    Activity: Talk or presentationConference presentation

  5. Bath/ASME Fluid Power & Motion Control Symposium, FPMC 2012, 12-14 September 2012 (Journal)

    Lauri Siivonen (Reviewer)
    2012

    Activity: Publication peer-review and editorial workReviewer of Conference Article

  6. Breaking down the requirements: reliability in remote handling software

    Pekka Alho (Speaker)
    2012

    Activity: Talk or presentationConference presentation

  7. Breaking down the requirements: reliability in remote handling software

    Jouni Mattila (Speaker)
    2012

    Activity: Talk or presentationConference presentation

  8. Divertor Cassette Locking System Remote Handling Trials with WHMAN at DTP2

    Jouni Mattila (Speaker)
    2012

    Activity: Talk or presentationConference presentation

  9. Divertor Cassette Locking System Remote Handling Trials with WHMAN at DTP2

    Ville Lyytikäinen (Speaker)
    2012

    Activity: Talk or presentationConference presentation

  10. Divertor Cassette Locking System Remote Handling Trials with WHMAN at DTP2

    Pasi Kinnunen (Speaker)
    2012

    Activity: Talk or presentationConference presentation

  11. Divertor Cassette Locking System Remote Handling Trials with WHMAN at DTP2

    Janne Koivumäki (Contributor)
    2012

    Activity: Talk or presentationConference presentation

  12. Energy Conversion and Management (Journal)

    Jari Rinkinen (Reviewer)
    2012

    Activity: Publication peer-review and editorial workReviewer of Scientific Journal

  13. Hydrauliikka- ja Pneumatiikkayhdistyksen stipendin sai Mika Sahlman

    Mika Joonas Petteri Sahlman (Interviewee)
    2012

    Activity: OtherMedia appearance

  14. Hydraulikomponenttien puhtausvalvontastandardit

    Jari Rinkinen (Speaker)
    2012

    Activity: Talk or presentationConference presentation

  15. IEEE - ASME Transactions on Mechatronics (Journal)

    Jouni Mattila (Editor)
    2012

    Activity: Publication peer-review and editorial workMembership of an editorial board

  16. Interoperability of Remote Handling Control System Software Modules at DTP2 Using Middleware

    Janne Tuominen (Speaker)
    2012

    Activity: Talk or presentationConference presentation

  17. Interoperability of Remote Handling Control System Software Modules at DTP2 Using Middleware

    Teemu Ilmari Rasi (Speaker)
    2012

    Activity: Talk or presentationConference presentation

  18. Interoperability of Remote Handling Control System Software Modules at DTP2 Using Middleware

    Jouni Mattila (Speaker)
    2012

    Activity: Talk or presentationConference presentation

  19. Journal of Dynamic Systems, Measurement and Control: Transactions of the ASME (Journal)

    Kari Koskinen (Reviewer)
    2012

    Activity: Publication peer-review and editorial workReviewer of Scientific Journal

  20. Lubrication Science (Journal)

    Kari Koskinen (Reviewer)
    2012

    Activity: Publication peer-review and editorial workReviewer of Scientific Journal

  21. Mining machines get smart

    Kalevi Huhtala (Interviewee)
    2012

    Activity: OtherMedia appearance

  22. Proceedings of the institution of Mechanical Engineers Part C: Journal of Mechanical Engineering Science (Journal)

    Kalevi Huhtala (Reviewer)
    2012

    Activity: Publication peer-review and editorial workReviewer of Scientific Journal

  23. Proceedings of the Institution of Mechanical Engineers, Part E, Journal of Process Mechanical Engineering (Journal)

    Kari Koskinen (Reviewer)
    2012

    Activity: Publication peer-review and editorial workReviewer of Scientific Journal

  24. Semantic modelling and simulations enhance the design of machine systems

    Pekka Ranta (Interviewee)
    2012

    Activity: OtherMedia appearance

  25. Tekniske universitetet i Tampere, Institutt for intelligent hydraulikk og automasjon (IHA)

    Jari Rinkinen (Interviewee)
    2012

    Activity: OtherMedia appearance

  26. The Fifth Workshop on Digital Fluid Power, October 24-25, 2012, Tampere, Finland

    Miikka Ketonen (Organiser)
    2012

    Activity: Participating in or organising an eventOrganization of a workshop, panel, session or tutorial

  27. The Fifth Workshop on Digital Fluid Power, October 24-25, 2012, Tampere, Finland

    Matti Karvonen (Organiser)
    2012

    Activity: Participating in or organising an eventOrganization of a workshop, panel, session or tutorial

  28. The Fifth Workshop on Digital Fluid Power, October 24-25, 2012, Tampere, Finland

    Mika Joonas Petteri Sahlman (Organiser)
    2012

    Activity: Participating in or organising an eventOrganization of a workshop, panel, session or tutorial

  29. The Fifth Workshop on Digital Fluid Power, October 24-25, 2012, Tampere, Finland

    Tuomas Valtteri Salomaa (Organiser)
    2012

    Activity: Participating in or organising an eventOrganization of a workshop, panel, session or tutorial

  30. The Fifth Workshop on Digital Fluid Power, October 24-25, 2012, Tampere, Finland

    Arto Laamanen (Organiser)
    2012

    Activity: Participating in or organising an eventOrganization of a workshop, panel, session or tutorial

  31. The Fifth Workshop on Digital Fluid Power, October 24-25, 2012, Tampere, Finland

    Mikko Huova (Organiser)
    2012

    Activity: Participating in or organising an eventOrganization of a workshop, panel, session or tutorial

  32. The Fifth Workshop on Digital Fluid Power, October 24-25, 2012, Tampere, Finland

    Vänni Tapani Alarotu (Organiser)
    2012

    Activity: Participating in or organising an eventOrganization of a workshop, panel, session or tutorial

  33. The Fifth Workshop on Digital Fluid Power, October 24-25, 2012, Tampere, Finland

    Miika Paloniitty (Organiser)
    2012

    Activity: Participating in or organising an eventOrganization of a workshop, panel, session or tutorial

  34. The Fifth Workshop on Digital Fluid Power, October 24-25, 2012, Tampere, Finland

    Mikko Heikkilä (Organiser)
    2012

    Activity: Participating in or organising an eventOrganization of a workshop, panel, session or tutorial

  35. The Fifth Workshop on Digital Fluid Power, October 24-25, 2012, Tampere, Finland

    Jyrki Tammisto (Organiser)
    2012

    Activity: Participating in or organising an eventOrganization of a workshop, panel, session or tutorial

  36. The Fifth Workshop on Digital Fluid Power, October 24-25, 2012, Tampere, Finland

    Matti Linjama (Organiser)
    2012

    Activity: Participating in or organising an eventOrganization of a workshop, panel, session or tutorial

  37. The Fift Workshop on Digital Fluid Power, October 24-25, 2012, Tampere, Finland

    Matti Linjama (Chair)
    2012

    Activity: Participating in or organising an eventChair of workshop, panel, session or tutorial

  38. The Fift Workshop on Digital Fluid Power, October 24-25, 2012, Tampere, Finland

    Lauri Siivonen (Chair)
    2012

    Activity: Participating in or organising an eventChair of workshop, panel, session or tutorial

  39. The Fift Workshop on Digital Fluid Power, October 24-25, 2012, Tampere, Finland

    Kalevi Huhtala (Chair)
    2012

    Activity: Participating in or organising an eventChair of workshop, panel, session or tutorial

  40. TTY tuottaa maailmanluokan osaamista automaatioon ja hydrauliikkaan

    Kalevi Huhtala (Interviewee)
    2012

    Activity: OtherMedia appearance

  41. Väitöskirjan vastaväittäjä, Opponent of doctoral

    Kalevi Huhtala (Examiner)
    2012

    Activity: ExaminationPre-examination of dissertation or acting as opponent to doctoral students

  42. Wear (Journal)

    Kari Koskinen (Reviewer)
    2012

    Activity: Publication peer-review and editorial workReviewer of Scientific Journal

  43. 2011
  44. An implementation of a semantic, web-based virtual machine laboratory prototyping environment

    Tuija Maria Kristiina Palonen (Speaker)
    2011

    Activity: Talk or presentationConference presentation

  45. An implementation of a semantic, web-based virtual machine laboratory prototyping environment

    Kari Koskinen (Speaker)
    2011

    Activity: Talk or presentationConference presentation

  46. An implementation of a semantic, web-based virtual machine laboratory prototyping environment

    Ossi Nykänen (Speaker)
    2011

    Activity: Talk or presentationConference presentation

  47. An implementation of a semantic, web-based virtual machine laboratory prototyping environment

    Markus Rokala (Speaker)
    2011

    Activity: Talk or presentationConference presentation

  48. An implementation of a semantic, web-based virtual machine laboratory prototyping environment

    Jaakko Tapio Antero Salonen (Speaker)
    2011

    Activity: Talk or presentationConference presentation

  49. An implementation of a semantic, web-based virtual machine laboratory prototyping environment

    Juha Nurmi (Speaker)
    2011

    Activity: Talk or presentationConference presentation

  50. An implementation of a semantic, web-based virtual machine laboratory prototyping environment

    Vänni Tapani Alarotu (Speaker)
    2011

    Activity: Talk or presentationConference presentation

  51. An implementation of a semantic, web-based virtual machine laboratory prototyping environment

    Matti Henrik Antero Helminen (Speaker)
    2011

    Activity: Talk or presentationConference presentation

  52. An implementation of a semantic, web-based virtual machine laboratory prototyping environment

    Pekka Ranta (Speaker)
    2011

    Activity: Talk or presentationConference presentation

  53. Fimecc palkitsi digihydrauliikasta

    Matti Linjama (Interviewee)
    2011

    Activity: OtherMedia appearance

  54. Hyötysuhde ylös, kulutus alas - Digitaalinen hydrauliikka

    Matti Vilenius (Interviewee)
    2011

    Activity: OtherMedia appearance

  55. International Journal of Computer Aided Engineering and Technology (Journal)

    Kari Koskinen (Reviewer)
    2011

    Activity: Publication peer-review and editorial workReviewer of Scientific Journal

  56. Journal of Fluids Engineering: Transactions of the ASME (Journal)

    Kari Koskinen (Reviewer)
    2011

    Activity: Publication peer-review and editorial workReviewer of Scientific Journal

  57. Lentokaluston hydrauliikan kunnonvalvontajärjestelmä

    Tomi Krogerus (Speaker)
    2011

    Activity: Talk or presentationConference presentation

  58. Lentokaluston hydrauliikan kunnonvalvontajärjestelmä

    Jussi Aaltonen (Speaker)
    2011

    Activity: Talk or presentationConference presentation

  59. Liikkuvan työkoneen työhydrauliikan älykäs kunnonvalvonta

    Tomi Krogerus (Speaker)
    2011

    Activity: Talk or presentationConference presentation

  60. Mechatronics (Journal)

    Matti Linjama (Reviewer)
    2011

    Activity: Publication peer-review and editorial workReviewer of Scientific Journal

  61. Menetelmiä huoltojen suunnitteluun ja vikojen ehkäisemiseen

    Tomi Krogerus (Interviewee)
    2011

    Activity: OtherMedia appearance

  62. Menetelmiä hydraulijärjestelmien huoltojen suunnitteluun ja vikojen ehkäisemiseen

    Tomi Krogerus (Interviewee)
    2011

    Activity: OtherMedia appearance

  63. Poralaitteen kokonaismalli toimii pian virtuaaliympäristössä

    Pekka Ranta (Interviewee)
    2011

    Activity: OtherMedia appearance

  64. Poralaitteen kokonaismalli toimii pian virtuaaliympäristössä

    Kari Koskinen (Interviewee)
    2011

    Activity: OtherMedia appearance

  65. Proceedings of the institution of Mechanical Engineers Part C: Journal of Mechanical Engineering Science (Journal)

    Matti Linjama (Reviewer)
    2011

    Activity: Publication peer-review and editorial workReviewer of Scientific Journal

  66. Proceedings of the institution of Mechanical Engineers Part C: Journal of Mechanical Engineering Science (Journal)

    Kari Koskinen (Reviewer)
    2011

    Activity: Publication peer-review and editorial workReviewer of Scientific Journal

  67. Semanttinen mallinnus avaa uusia mahdollisuuksia kilpailukyvyn lisäämiseksi

    Tuija Maria Kristiina Palonen (Interviewee)
    2011

    Activity: OtherMedia appearance

  68. Semanttinen mallinnus avaa uusia mahdollisuuksia kilpailukyvyn lisäämiseksi

    Pekka Ranta (Interviewee)
    2011

    Activity: OtherMedia appearance

  69. Semanttinen mallinnus avaa uusia mahdollisuuksia kilpailukyvyn lisäämiseksi

    Ossi Nykänen (Interviewee)
    2011

    Activity: OtherMedia appearance

  70. Simulation study - improving efficiency in mobile boom by using digital hydraulic power management system

    Mikko Heikkilä (Invited lecturer)
    2011

    Activity: Talk or presentationInvited lecture

  71. Simulation study - improving efficiency in mobile boom by using digital hydraulic power management system

    Matti Karvonen (Invited lecturer)
    2011

    Activity: Talk or presentationInvited lecture

  72. Tribology International (Journal)

    Kari Koskinen (Reviewer)
    2011

    Activity: Publication peer-review and editorial workReviewer of Scientific Journal

  73. TTY tuottaa maailmanluokan osaamista automaatioon ja hydrauliikkaan

    Kalevi Huhtala (Interviewee)
    2011

    Activity: OtherMedia appearance

  74. 2010
  75. Advantage of redundancy in the controllability of remote handling manipulator

    Matti Vilenius (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  76. Advantage of redundancy in the controllability of remote handling manipulator

    Jouni Mattila (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  77. Advantage of redundancy in the controllability of remote handling manipulator

    Muhammad Ali (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  78. Analysis of the new architecture proposal for the CMM control system

    Antti Hahto (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  79. Analysis of the new architecture proposal for the CMM control system

    Lasse Heikkilä (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  80. Analysis of the new architecture proposal for the CMM control system

    Mikko Viinikainen (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  81. Analysis of the new architecture proposal for the CMM control system

    Liisa Aha (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  82. Analysis of the new architecture proposal for the CMM control system

    Jouni Mattila (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  83. Calibration and compensation of deflections and compliances in remote handling equipment conbfigurations

    Tuomo Kivelä (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  84. Categorization of ITER remote handling operations

    Jouni Mattila (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  85. Categorization of ITER remote handling operations

    Liisa Aha (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  86. Command and Control application framework for interoperable heterogeneous ITER Remote Handling devices

    Janne Tuominen (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  87. Command and Control application framework for interoperable heterogeneous ITER Remote Handling devices

    Liisa Aha (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  88. Command and Control application framework for interoperable heterogeneous ITER Remote Handling devices

    Muhammad Ali (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  89. DTP2 control room operator and remote handing operation designer responsibilities and information available to them

    Hannu Kalevi Saarinen (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  90. DTP2 control room operator and remote handing operation designer responsibilities and information available to them

    Liisa Aha (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  91. DTP2 control room operator and remote handing operation designer responsibilities and information available to them

    Mikko Siuko (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  92. Fluid Finland (Journal)

    Jari Rinkinen (Editorial board member)
    2010

    Activity: Publication peer-review and editorial workMembership of an editorial board

  93. Journal of Automobile Engineering (Journal)

    Mika Herranen (Reviewer)
    2010

    Activity: Publication peer-review and editorial workReviewer of Scientific Journal

  94. Kunnossapidon julkaisusarja (Journal)

    Jari Rinkinen (Editorial board member)
    2010

    Activity: Publication peer-review and editorial workMembership of an editorial board

  95. Online markerless augmented reality for remote handling system in bad viewing conditions

    Mikko Siuko (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  96. Online markerless augmented reality for remote handling system in bad viewing conditions

    Jouni Mattila (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  97. Online markerless augmented reality for remote handling system in bad viewing conditions

    Zahra Ziaei (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  98. Online markerless augmented reality for remote handling system in bad viewing conditions

    Antti Hahto (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  99. Predicting the runtime reliability of ITER Remote Handling maintenance equipment

    Jouni Mattila (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  100. Predicting the runtime reliability of ITER Remote Handling maintenance equipment

    Peetu Joni Petteri Valkama (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  101. Predicting the runtime reliability of ITER Remote Handling maintenance equipment

    Muhammad Ali (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  102. Predicting the runtime reliability of ITER Remote Handling maintenance equipment

    Jukka Väyrynen (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  103. Predicting the runtime reliability of ITER Remote Handling maintenance equipment

    Matti Vilenius (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  104. Proceedings of the Institution of Mechanical Engineers, Part A, Journal of Power and Energy (Journal)

    Kari Koskinen (Reviewer)
    2010

    Activity: Publication peer-review and editorial workReviewer of Scientific Journal

  105. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering (Journal)

    Kalevi Huhtala (Reviewer)
    2010

    Activity: Publication peer-review and editorial workReviewer of Scientific Journal

  106. Promaint (Journal)

    Jari Rinkinen (Editorial board member)
    2010

    Activity: Publication peer-review and editorial workMembership of an editorial board

  107. Real-time markerless Augmented Reality for Remote Handling system in bad viewing conditions

    Jouni Mattila (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  108. Real-time markerless Augmented Reality for Remote Handling system in bad viewing conditions

    Antti Hahto (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  109. Real-time markerless Augmented Reality for Remote Handling system in bad viewing conditions

    Zahra Ziaei (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  110. Results of CMM standalone tests at DTP2

    Tuomo Kivelä (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  111. Results of CMM standalone tests at DTP2

    Mikko Viinikainen (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  112. Results of CMM standalone tests at DTP2

    Likui Zhai (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  113. Results of CMM standalone tests at DTP2

    Liisa Aha (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  114. Results of CMM standalone tests at DTP2

    Lasse Heikkilä (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  115. Results of CMM standalone tests at DTP2

    Jouni Mattila (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  116. Results of CMM standalone tests at DTP2

    Juho-Pekka Karjalainen (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  117. Robust control of Cassette Multi-functional Mover for ITER remote handling tasks

    Jouni Mattila (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  118. Robust control of Cassette Multi-functional Mover for ITER remote handling tasks

    Tapio Kalevi Virvalo (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  119. Robust control of Cassette Multi-functional Mover for ITER remote handling tasks

    Likui Zhai (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  120. Supervisory system for DTP2 remote handling operations

    Teemu Nurminen (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  121. Supervisory system for DTP2 remote handling operations

    Antti Hahto (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  122. Supervisory system for DTP2 remote handling operations

    Mikko Siuko (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  123. Supervisory system for DTP2 remote handling operations

    Lasse Heikkilä (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  124. Supervisory system for DTP2 remote handling operations

    Liisa Aha (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  125. Supervisory system for DTP2 remote handling operations

    Jouni Mattila (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  126. Supervisory system for DTP2 remote handling operations

    Hannu Kalevi Saarinen (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  127. Supervisory system for DTP2 remote handling operations

    Ari Markus Aaltonen (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  128. The 3rd International Seminar on Maintenance, Condition Monitoring and Diagnostics, September 29th-30th, 2010, Pohto, Oulu, Finland

    Jari Rinkinen (Member)
    2010

    Activity: Participating in or organising an eventMembership of a scientific or program committee of a conference or seminar

  129. Tieteen johtotähdet

    Markku Kivikoski (Interviewee)
    2010

    Activity: OtherMedia appearance

  130. Tieteen johtotähdet

    Viljo Markus Pessa (Interviewee)
    2010

    Activity: OtherMedia appearance

  131. Tieteen johtotähdet

    Jaakko Astola (Interviewee)
    2010

    Activity: OtherMedia appearance

  132. Tieteen johtotähdet

    Matti Vilenius (Interviewee)
    2010

    Activity: OtherMedia appearance

  133. Virtuaaliset konelaboratoriot koneenrakennus- ja prosessiteollisuuden osaamisen kehittämisen palvelujen keskiössä

    Ossi Nykänen (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  134. Virtuaaliset konelaboratoriot koneenrakennus- ja prosessiteollisuuden osaamisen kehittämisen palvelujen keskiössä

    Pekka Ranta (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  135. 2009
  136. Combined application of product lifecycle and software configuration management systems for ITER remote handling

    Matti Vilenius (Speaker)
    2009

    Activity: Talk or presentationConference presentation

  137. Combined application of product lifecycle and software configuration management systems for ITER remote handling

    Liisa Aha (Speaker)
    2009

    Activity: Talk or presentationConference presentation

  138. Combined application of product lifecycle and software configuration management systems for ITER remote handling

    Salvador Esque Sole (Speaker)
    2009

    Activity: Talk or presentationConference presentation

  139. Combined application of product lifecycle and software configuration management systems for ITER remote handling

    Mikko Siuko (Speaker)
    2009

    Activity: Talk or presentationConference presentation

  140. Combined application of product lifecycle and software configuration management systems for ITER remote handling

    Muhammad Ali (Speaker)
    2009

    Activity: Talk or presentationConference presentation

  141. Development and design optimization of water hydraulic manipulator for ITER

    Jouni Mattila (Speaker)
    2009

    Activity: Talk or presentationConference presentation

  142. Development and design optimization of water hydraulic manipulator for ITER

    Teemu Henri Tapio Kekäläinen (Speaker)
    2009

    Activity: Talk or presentationConference presentation

  143. Development and design optimization of water hydraulic manipulator for ITER

    Tapio Kalevi Virvalo (Speaker)
    2009

    Activity: Talk or presentationConference presentation

  144. Enhanced industrial maintenance work task planning by using virtual engineering tools and haptic user interfaces

    Muhammad Ali (Speaker)
    2009

    Activity: Talk or presentationConference presentation

  145. Enhanced industrial maintenance work task planning by using virtual engineering tools and haptic user interfaces

    Ari Veikko Mäkiranta (Speaker)
    2009

    Activity: Talk or presentationConference presentation

  146. Enhanced industrial maintenance work task planning by using virtual engineering tools and haptic user interfaces

    Salla Maria Lind (Speaker)
    2009

    Activity: Talk or presentationConference presentation

  147. Optimized hardware design for the divertor remote handling control system

    Juha Tapio Tiitinen (Speaker)
    2009

    Activity: Talk or presentationConference presentation

  148. Optimized hardware design for the divertor remote handling control system

    Mikko Siuko (Speaker)
    2009

    Activity: Talk or presentationConference presentation

  149. Optimized hardware design for the divertor remote handling control system

    Matti Vilenius (Speaker)
    2009

    Activity: Talk or presentationConference presentation

  150. Optimized hardware design for the divertor remote handling control system

    Muhammad Ali (Speaker)
    2009

    Activity: Talk or presentationConference presentation

  151. Optimized hardware design for the divertor remote handling control system

    Liisa Aha (Speaker)
    2009

    Activity: Talk or presentationConference presentation

  152. Optimized hardware design for the divertor remote handling control system

    Hannu Kalevi Saarinen (Speaker)
    2009

    Activity: Talk or presentationConference presentation

  153. Optimized hardware design for the divertor remote handling control system

    Jouni Mattila (Speaker)
    2009

    Activity: Talk or presentationConference presentation

  154. Proceedings of the institution of Mechanical Engineers Part C: Journal of Mechanical Engineering Science (Journal)

    Kari Koskinen (Reviewer)
    2009

    Activity: Publication peer-review and editorial workReviewer of Scientific Journal

  155. Proceedings of the Institution of Mechanical Engineers, Part E, Journal of Process Mechanical Engineering (Journal)

    Kari Koskinen (Reviewer)
    2009

    Activity: Publication peer-review and editorial workReviewer of Scientific Journal

  156. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering (Journal)

    Kari Koskinen (Reviewer)
    2009

    Activity: Publication peer-review and editorial workReviewer of Scientific Journal

  157. The use of digital mock-ups on the development of the divertor test platform 2

    Jouni Mattila (Speaker)
    2009

    Activity: Talk or presentationConference presentation

  158. The use of digital mock-ups on the development of the divertor test platform 2

    Matti Vilenius (Speaker)
    2009

    Activity: Talk or presentationConference presentation

  159. The use of digital mock-ups on the development of the divertor test platform 2

    Mikko Siuko (Speaker)
    2009

    Activity: Talk or presentationConference presentation

  160. The use of digital mock-ups on the development of the divertor test platform 2

    Salvador Esque Sole (Speaker)
    2009

    Activity: Talk or presentationConference presentation

  161. Unified software development approach for the safety-critical ITER maintenance devices

    Mikko Siuko (Speaker)
    2009

    Activity: Talk or presentationConference presentation

  162. Unified software development approach for the safety-critical ITER maintenance devices

    Juha Tapio Tiitinen (Speaker)
    2009

    Activity: Talk or presentationConference presentation

  163. Unified software development approach for the safety-critical ITER maintenance devices

    Jouni Mattila (Speaker)
    2009

    Activity: Talk or presentationConference presentation

  164. Unified software development approach for the safety-critical ITER maintenance devices

    Hannu Kalevi Saarinen (Speaker)
    2009

    Activity: Talk or presentationConference presentation

  165. Unified software development approach for the safety-critical ITER maintenance devices

    Muhammad Ali (Speaker)
    2009

    Activity: Talk or presentationConference presentation

  166. Unified software development approach for the safety-critical ITER maintenance devices

    Matti Vilenius (Speaker)
    2009

    Activity: Talk or presentationConference presentation

  167. Unified software development approach for the safety-critical ITER maintenance devices

    Liisa Aha (Speaker)
    2009

    Activity: Talk or presentationConference presentation

  168. Validation of divertor cassette locking system with a hydraulic jack tool

    Jouni Mattila (Speaker)
    2009

    Activity: Talk or presentationConference presentation

  169. Validation of divertor cassette locking system with a hydraulic jack tool

    Ville Matias Takalo (Speaker)
    2009

    Activity: Talk or presentationConference presentation

  170. Validation of divertor cassette locking system with a hydraulic jack tool

    Salvador Esque Sole (Speaker)
    2009

    Activity: Talk or presentationConference presentation

  171. Validation of divertor cassette locking system with a hydraulic jack tool

    Mikko Siuko (Speaker)
    2009

    Activity: Talk or presentationConference presentation

  172. Validation of divertor cassette locking system with a hydraulic jack tool

    Matti Vilenius (Speaker)
    2009

    Activity: Talk or presentationConference presentation

  173. Water hydraulic manipulator for fail safe and fault tolerant remote handling operations at ITER

    Salvador Esque Sole (Speaker)
    2009

    Activity: Talk or presentationConference presentation

  174. Water hydraulic manipulator for fail safe and fault tolerant remote handling operations at ITER

    Muhammad Ali (Speaker)
    2009

    Activity: Talk or presentationConference presentation

  175. Water hydraulic manipulator for fail safe and fault tolerant remote handling operations at ITER

    Jouni Mattila (Speaker)
    2009

    Activity: Talk or presentationConference presentation

  176. Water hydraulic manipulator for fail safe and fault tolerant remote handling operations at ITER

    Mikko Siuko (Speaker)
    2009

    Activity: Talk or presentationConference presentation

  177. Water hydraulic manipulator for fail safe and fault tolerant remote handling operations at ITER

    Matti Vilenius (Speaker)
    2009

    Activity: Talk or presentationConference presentation

  178. Water hydraulic manipulator for fail safe and fault tolerant remote handling operations at ITER

    Peetu Joni Petteri Valkama (Speaker)
    2009

    Activity: Talk or presentationConference presentation

  179. Water hydraulic manipulator for fail safe and fault tolerant remote handling operations at ITER

    Jukka Väyrynen (Speaker)
    2009

    Activity: Talk or presentationConference presentation

  180. 2008
  181. 6. Internationales Fluidtechnisches Kolloquium 31.3.-2.4.2008, Dresden, Germany

    Matti Vilenius (Member)
    2008

    Activity: Participating in or organising an eventMembership of a scientific or program committee of a conference or seminar

  182. 6. Internationales Fluidtechnisches Kolloquium 31.3.-2.4.2008, Dresden, Germany

    Matti Vilenius (Chair)
    2008

    Activity: Participating in or organising an eventChair of workshop, panel, session or tutorial

  183. 7th JFPS International Symposium on Fluid Power Toyama, Japan, 2008

    Matti Vilenius (Member)
    2008

    Activity: Participating in or organising an eventMembership of a scientific or program committee of a conference or seminar

  184. Asiantuntijalausunto: Lehrstuhl Fluidmechatronik an der TU München

    Matti Vilenius (Examiner)
    2008

    Activity: ExaminationStatement of assessment of professorship

  185. ASME (External organisation)

    Matti Vilenius (Reviewer)
    2008

    Activity: MembershipMembership of a competition jury

  186. Digitaalihydrauliikka

    Arto Laamanen (Speaker)
    2008

    Activity: Talk or presentationConference presentation

  187. Hydrauliikkaöljyjen valinta

    Reijo Karjalainen (Speaker)
    2008

    Activity: Talk or presentationConference presentation

  188. Hydraulijärjestelmien kunnonvalvonta

    Pekka Mikael Virta (Speaker)
    2008

    Activity: Talk or presentationConference presentation

  189. Hydraulijärjestelmien mallinnus

    Jukka-Pekka Hietala (Speaker)
    2008

    Activity: Talk or presentationConference presentation

  190. IMechE (External organisation)

    Matti Vilenius (Reviewer)
    2008

    Activity: MembershipMembership of a competition jury

  191. International Journal of Fluid Power (Journal)

    Matti Vilenius (Editorial board member)
    2008

    Activity: Publication peer-review and editorial workMembership of an editorial board

  192. International Journal of Fluid Power (Journal)

    Matti Linjama (Reviewer)
    2008

    Activity: Publication peer-review and editorial workReviewer of Scientific Journal

  193. Journal of Dynamic Systems, Measurement and Control: Transactions of the ASME (Journal)

    Matti Linjama (Reviewer)
    2008

    Activity: Publication peer-review and editorial workReviewer of Scientific Journal

  194. MASIT31 Työkoneen integrointivaiheen automaattinen testaus

    Petteri Multanen (Speaker)
    2008

    Activity: Talk or presentationConference presentation

  195. Mechatronics (Journal)

    Matti Linjama (Reviewer)
    2008

    Activity: Publication peer-review and editorial workReviewer of Scientific Journal

  196. Proceedings of the institution of Mechanical Engineers Part C: Journal of Mechanical Engineering Science (Journal)

    Kari Koskinen (Reviewer)
    2008

    Activity: Publication peer-review and editorial workReviewer of Scientific Journal

  197. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering (Journal)

    Kari Koskinen (Reviewer)
    2008

    Activity: Publication peer-review and editorial workReviewer of Scientific Journal

  198. Sustainable development with water hydraulics - possibilities and challenges

    Timo Johannes Leino (Invited lecturer)
    2008

    Activity: Talk or presentationInvited lecture

  199. Sustainable development with water hydraulics - possibilities and challenges

    Kari Koskinen (Invited lecturer)
    2008

    Activity: Talk or presentationInvited lecture

  200. Sustainable development with water hydraulics - possibilities and challenges

    Hannu Tapio Riipinen (Invited lecturer)
    2008

    Activity: Talk or presentationInvited lecture

  201. The 7th International Conference on Fluid Power Transmission and Control ICFP 2009, April 7-10, 2009, China

    Matti Vilenius (Member)
    2008

    Activity: Participating in or organising an eventMembership of a scientific or program committee of a conference or seminar

  202. Vesihydrauliikan älykäs kunnonvalvonta

    Tomi Krogerus (Speaker)
    2008

    Activity: Talk or presentationConference presentation

  203. Vesihydrauliikan liikkeen hallinta

    Harri Tapio Sairiala (Speaker)
    2008

    Activity: Talk or presentationConference presentation

ID: 21447