Tampere University of Technology

TUTCRIS Research Portal

Department of Intelligent Hydraulics and Automation

Research unit: Department

  1. 2008
  2. 6. Internationales Fluidtechnisches Kolloquium 31.3.-2.4.2008, Dresden, Germany

    Matti Vilenius (Member)
    2008

    Activity: Participating in or organising an eventMembership of a scientific or program committee of a conference or seminar

  3. 6. Internationales Fluidtechnisches Kolloquium 31.3.-2.4.2008, Dresden, Germany

    Matti Vilenius (Chair)
    2008

    Activity: Participating in or organising an eventChair of workshop, panel, session or tutorial

  4. 7th JFPS International Symposium on Fluid Power Toyama, Japan, 2008

    Matti Vilenius (Member)
    2008

    Activity: Participating in or organising an eventMembership of a scientific or program committee of a conference or seminar

  5. Asiantuntijalausunto: Lehrstuhl Fluidmechatronik an der TU München

    Matti Vilenius (Examiner)
    2008

    Activity: ExaminationStatement of assessment of professorship

  6. ASME (External organisation)

    Matti Vilenius (Reviewer)
    2008

    Activity: MembershipMembership of a competition jury

  7. Digitaalihydrauliikka

    Arto Laamanen (Speaker)
    2008

    Activity: Talk or presentationConference presentation

  8. Hydrauliikkaöljyjen valinta

    Reijo Karjalainen (Speaker)
    2008

    Activity: Talk or presentationConference presentation

  9. Hydraulijärjestelmien kunnonvalvonta

    Pekka Mikael Virta (Speaker)
    2008

    Activity: Talk or presentationConference presentation

  10. Hydraulijärjestelmien mallinnus

    Jukka-Pekka Hietala (Speaker)
    2008

    Activity: Talk or presentationConference presentation

  11. IMechE (External organisation)

    Matti Vilenius (Reviewer)
    2008

    Activity: MembershipMembership of a competition jury

  12. International Journal of Fluid Power (Journal)

    Matti Vilenius (Editorial board member)
    2008

    Activity: Publication peer-review and editorial workMembership of an editorial board

  13. International Journal of Fluid Power (Journal)

    Matti Linjama (Reviewer)
    2008

    Activity: Publication peer-review and editorial workReviewer of Scientific Journal

  14. Journal of Dynamic Systems, Measurement and Control: Transactions of the ASME (Journal)

    Matti Linjama (Reviewer)
    2008

    Activity: Publication peer-review and editorial workReviewer of Scientific Journal

  15. MASIT31 Työkoneen integrointivaiheen automaattinen testaus

    Petteri Multanen (Speaker)
    2008

    Activity: Talk or presentationConference presentation

  16. Mechatronics (Journal)

    Matti Linjama (Reviewer)
    2008

    Activity: Publication peer-review and editorial workReviewer of Scientific Journal

  17. Proceedings of the institution of Mechanical Engineers Part C: Journal of Mechanical Engineering Science (Journal)

    Kari Koskinen (Reviewer)
    2008

    Activity: Publication peer-review and editorial workReviewer of Scientific Journal

  18. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering (Journal)

    Kari Koskinen (Reviewer)
    2008

    Activity: Publication peer-review and editorial workReviewer of Scientific Journal

  19. Sustainable development with water hydraulics - possibilities and challenges

    Timo Johannes Leino (Invited lecturer)
    2008

    Activity: Talk or presentationInvited lecture

  20. Sustainable development with water hydraulics - possibilities and challenges

    Kari Koskinen (Invited lecturer)
    2008

    Activity: Talk or presentationInvited lecture

  21. Sustainable development with water hydraulics - possibilities and challenges

    Hannu Tapio Riipinen (Invited lecturer)
    2008

    Activity: Talk or presentationInvited lecture

  22. The 7th International Conference on Fluid Power Transmission and Control ICFP 2009, April 7-10, 2009, China

    Matti Vilenius (Member)
    2008

    Activity: Participating in or organising an eventMembership of a scientific or program committee of a conference or seminar

  23. Vesihydrauliikan älykäs kunnonvalvonta

    Tomi Krogerus (Speaker)
    2008

    Activity: Talk or presentationConference presentation

  24. Vesihydrauliikan liikkeen hallinta

    Harri Tapio Sairiala (Speaker)
    2008

    Activity: Talk or presentationConference presentation

  25. 2009
  26. Combined application of product lifecycle and software configuration management systems for ITER remote handling

    Matti Vilenius (Speaker)
    2009

    Activity: Talk or presentationConference presentation

  27. Combined application of product lifecycle and software configuration management systems for ITER remote handling

    Liisa Aha (Speaker)
    2009

    Activity: Talk or presentationConference presentation

  28. Combined application of product lifecycle and software configuration management systems for ITER remote handling

    Salvador Esque Sole (Speaker)
    2009

    Activity: Talk or presentationConference presentation

  29. Combined application of product lifecycle and software configuration management systems for ITER remote handling

    Mikko Siuko (Speaker)
    2009

    Activity: Talk or presentationConference presentation

  30. Combined application of product lifecycle and software configuration management systems for ITER remote handling

    Muhammad Ali (Speaker)
    2009

    Activity: Talk or presentationConference presentation

  31. Development and design optimization of water hydraulic manipulator for ITER

    Jouni Mattila (Speaker)
    2009

    Activity: Talk or presentationConference presentation

  32. Development and design optimization of water hydraulic manipulator for ITER

    Teemu Henri Tapio Kekäläinen (Speaker)
    2009

    Activity: Talk or presentationConference presentation

  33. Development and design optimization of water hydraulic manipulator for ITER

    Tapio Kalevi Virvalo (Speaker)
    2009

    Activity: Talk or presentationConference presentation

  34. Enhanced industrial maintenance work task planning by using virtual engineering tools and haptic user interfaces

    Muhammad Ali (Speaker)
    2009

    Activity: Talk or presentationConference presentation

  35. Enhanced industrial maintenance work task planning by using virtual engineering tools and haptic user interfaces

    Ari Veikko Mäkiranta (Speaker)
    2009

    Activity: Talk or presentationConference presentation

  36. Enhanced industrial maintenance work task planning by using virtual engineering tools and haptic user interfaces

    Salla Maria Lind (Speaker)
    2009

    Activity: Talk or presentationConference presentation

  37. Optimized hardware design for the divertor remote handling control system

    Juha Tapio Tiitinen (Speaker)
    2009

    Activity: Talk or presentationConference presentation

  38. Optimized hardware design for the divertor remote handling control system

    Mikko Siuko (Speaker)
    2009

    Activity: Talk or presentationConference presentation

  39. Optimized hardware design for the divertor remote handling control system

    Matti Vilenius (Speaker)
    2009

    Activity: Talk or presentationConference presentation

  40. Optimized hardware design for the divertor remote handling control system

    Muhammad Ali (Speaker)
    2009

    Activity: Talk or presentationConference presentation

  41. Optimized hardware design for the divertor remote handling control system

    Liisa Aha (Speaker)
    2009

    Activity: Talk or presentationConference presentation

  42. Optimized hardware design for the divertor remote handling control system

    Hannu Kalevi Saarinen (Speaker)
    2009

    Activity: Talk or presentationConference presentation

  43. Optimized hardware design for the divertor remote handling control system

    Jouni Mattila (Speaker)
    2009

    Activity: Talk or presentationConference presentation

  44. Proceedings of the institution of Mechanical Engineers Part C: Journal of Mechanical Engineering Science (Journal)

    Kari Koskinen (Reviewer)
    2009

    Activity: Publication peer-review and editorial workReviewer of Scientific Journal

  45. Proceedings of the Institution of Mechanical Engineers, Part E, Journal of Process Mechanical Engineering (Journal)

    Kari Koskinen (Reviewer)
    2009

    Activity: Publication peer-review and editorial workReviewer of Scientific Journal

  46. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering (Journal)

    Kari Koskinen (Reviewer)
    2009

    Activity: Publication peer-review and editorial workReviewer of Scientific Journal

  47. The use of digital mock-ups on the development of the divertor test platform 2

    Jouni Mattila (Speaker)
    2009

    Activity: Talk or presentationConference presentation

  48. The use of digital mock-ups on the development of the divertor test platform 2

    Matti Vilenius (Speaker)
    2009

    Activity: Talk or presentationConference presentation

  49. The use of digital mock-ups on the development of the divertor test platform 2

    Mikko Siuko (Speaker)
    2009

    Activity: Talk or presentationConference presentation

  50. The use of digital mock-ups on the development of the divertor test platform 2

    Salvador Esque Sole (Speaker)
    2009

    Activity: Talk or presentationConference presentation

  51. Unified software development approach for the safety-critical ITER maintenance devices

    Mikko Siuko (Speaker)
    2009

    Activity: Talk or presentationConference presentation

  52. Unified software development approach for the safety-critical ITER maintenance devices

    Juha Tapio Tiitinen (Speaker)
    2009

    Activity: Talk or presentationConference presentation

  53. Unified software development approach for the safety-critical ITER maintenance devices

    Jouni Mattila (Speaker)
    2009

    Activity: Talk or presentationConference presentation

  54. Unified software development approach for the safety-critical ITER maintenance devices

    Hannu Kalevi Saarinen (Speaker)
    2009

    Activity: Talk or presentationConference presentation

  55. Unified software development approach for the safety-critical ITER maintenance devices

    Muhammad Ali (Speaker)
    2009

    Activity: Talk or presentationConference presentation

  56. Unified software development approach for the safety-critical ITER maintenance devices

    Matti Vilenius (Speaker)
    2009

    Activity: Talk or presentationConference presentation

  57. Unified software development approach for the safety-critical ITER maintenance devices

    Liisa Aha (Speaker)
    2009

    Activity: Talk or presentationConference presentation

  58. Validation of divertor cassette locking system with a hydraulic jack tool

    Jouni Mattila (Speaker)
    2009

    Activity: Talk or presentationConference presentation

  59. Validation of divertor cassette locking system with a hydraulic jack tool

    Ville Matias Takalo (Speaker)
    2009

    Activity: Talk or presentationConference presentation

  60. Validation of divertor cassette locking system with a hydraulic jack tool

    Salvador Esque Sole (Speaker)
    2009

    Activity: Talk or presentationConference presentation

  61. Validation of divertor cassette locking system with a hydraulic jack tool

    Mikko Siuko (Speaker)
    2009

    Activity: Talk or presentationConference presentation

  62. Validation of divertor cassette locking system with a hydraulic jack tool

    Matti Vilenius (Speaker)
    2009

    Activity: Talk or presentationConference presentation

  63. Water hydraulic manipulator for fail safe and fault tolerant remote handling operations at ITER

    Salvador Esque Sole (Speaker)
    2009

    Activity: Talk or presentationConference presentation

  64. Water hydraulic manipulator for fail safe and fault tolerant remote handling operations at ITER

    Muhammad Ali (Speaker)
    2009

    Activity: Talk or presentationConference presentation

  65. Water hydraulic manipulator for fail safe and fault tolerant remote handling operations at ITER

    Jouni Mattila (Speaker)
    2009

    Activity: Talk or presentationConference presentation

  66. Water hydraulic manipulator for fail safe and fault tolerant remote handling operations at ITER

    Mikko Siuko (Speaker)
    2009

    Activity: Talk or presentationConference presentation

  67. Water hydraulic manipulator for fail safe and fault tolerant remote handling operations at ITER

    Matti Vilenius (Speaker)
    2009

    Activity: Talk or presentationConference presentation

  68. Water hydraulic manipulator for fail safe and fault tolerant remote handling operations at ITER

    Peetu Joni Petteri Valkama (Speaker)
    2009

    Activity: Talk or presentationConference presentation

  69. Water hydraulic manipulator for fail safe and fault tolerant remote handling operations at ITER

    Jukka Väyrynen (Speaker)
    2009

    Activity: Talk or presentationConference presentation

  70. 2010
  71. Advantage of redundancy in the controllability of remote handling manipulator

    Matti Vilenius (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  72. Advantage of redundancy in the controllability of remote handling manipulator

    Jouni Mattila (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  73. Advantage of redundancy in the controllability of remote handling manipulator

    Muhammad Ali (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  74. Analysis of the new architecture proposal for the CMM control system

    Antti Hahto (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  75. Analysis of the new architecture proposal for the CMM control system

    Lasse Heikkilä (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  76. Analysis of the new architecture proposal for the CMM control system

    Mikko Viinikainen (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  77. Analysis of the new architecture proposal for the CMM control system

    Liisa Aha (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  78. Analysis of the new architecture proposal for the CMM control system

    Jouni Mattila (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  79. Calibration and compensation of deflections and compliances in remote handling equipment conbfigurations

    Tuomo Kivelä (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  80. Categorization of ITER remote handling operations

    Jouni Mattila (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  81. Categorization of ITER remote handling operations

    Liisa Aha (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  82. Command and Control application framework for interoperable heterogeneous ITER Remote Handling devices

    Janne Tuominen (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  83. Command and Control application framework for interoperable heterogeneous ITER Remote Handling devices

    Liisa Aha (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  84. Command and Control application framework for interoperable heterogeneous ITER Remote Handling devices

    Muhammad Ali (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  85. DTP2 control room operator and remote handing operation designer responsibilities and information available to them

    Hannu Kalevi Saarinen (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  86. DTP2 control room operator and remote handing operation designer responsibilities and information available to them

    Liisa Aha (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  87. DTP2 control room operator and remote handing operation designer responsibilities and information available to them

    Mikko Siuko (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  88. Fluid Finland (Journal)

    Jari Rinkinen (Editorial board member)
    2010

    Activity: Publication peer-review and editorial workMembership of an editorial board

  89. Journal of Automobile Engineering (Journal)

    Mika Herranen (Reviewer)
    2010

    Activity: Publication peer-review and editorial workReviewer of Scientific Journal

  90. Kunnossapidon julkaisusarja (Journal)

    Jari Rinkinen (Editorial board member)
    2010

    Activity: Publication peer-review and editorial workMembership of an editorial board

  91. Online markerless augmented reality for remote handling system in bad viewing conditions

    Mikko Siuko (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  92. Online markerless augmented reality for remote handling system in bad viewing conditions

    Jouni Mattila (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  93. Online markerless augmented reality for remote handling system in bad viewing conditions

    Zahra Ziaei (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  94. Online markerless augmented reality for remote handling system in bad viewing conditions

    Antti Hahto (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  95. Predicting the runtime reliability of ITER Remote Handling maintenance equipment

    Jouni Mattila (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  96. Predicting the runtime reliability of ITER Remote Handling maintenance equipment

    Peetu Joni Petteri Valkama (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  97. Predicting the runtime reliability of ITER Remote Handling maintenance equipment

    Muhammad Ali (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  98. Predicting the runtime reliability of ITER Remote Handling maintenance equipment

    Jukka Väyrynen (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  99. Predicting the runtime reliability of ITER Remote Handling maintenance equipment

    Matti Vilenius (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  100. Proceedings of the Institution of Mechanical Engineers, Part A, Journal of Power and Energy (Journal)

    Kari Koskinen (Reviewer)
    2010

    Activity: Publication peer-review and editorial workReviewer of Scientific Journal

  101. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering (Journal)

    Kalevi Huhtala (Reviewer)
    2010

    Activity: Publication peer-review and editorial workReviewer of Scientific Journal

  102. Promaint (Journal)

    Jari Rinkinen (Editorial board member)
    2010

    Activity: Publication peer-review and editorial workMembership of an editorial board

  103. Real-time markerless Augmented Reality for Remote Handling system in bad viewing conditions

    Jouni Mattila (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  104. Real-time markerless Augmented Reality for Remote Handling system in bad viewing conditions

    Antti Hahto (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  105. Real-time markerless Augmented Reality for Remote Handling system in bad viewing conditions

    Zahra Ziaei (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  106. Results of CMM standalone tests at DTP2

    Tuomo Kivelä (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  107. Results of CMM standalone tests at DTP2

    Mikko Viinikainen (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  108. Results of CMM standalone tests at DTP2

    Likui Zhai (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  109. Results of CMM standalone tests at DTP2

    Liisa Aha (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  110. Results of CMM standalone tests at DTP2

    Lasse Heikkilä (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  111. Results of CMM standalone tests at DTP2

    Jouni Mattila (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  112. Results of CMM standalone tests at DTP2

    Juho-Pekka Karjalainen (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  113. Robust control of Cassette Multi-functional Mover for ITER remote handling tasks

    Jouni Mattila (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  114. Robust control of Cassette Multi-functional Mover for ITER remote handling tasks

    Tapio Kalevi Virvalo (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  115. Robust control of Cassette Multi-functional Mover for ITER remote handling tasks

    Likui Zhai (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  116. Supervisory system for DTP2 remote handling operations

    Teemu Nurminen (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  117. Supervisory system for DTP2 remote handling operations

    Antti Hahto (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  118. Supervisory system for DTP2 remote handling operations

    Mikko Siuko (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  119. Supervisory system for DTP2 remote handling operations

    Lasse Heikkilä (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  120. Supervisory system for DTP2 remote handling operations

    Liisa Aha (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  121. Supervisory system for DTP2 remote handling operations

    Jouni Mattila (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  122. Supervisory system for DTP2 remote handling operations

    Hannu Kalevi Saarinen (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  123. Supervisory system for DTP2 remote handling operations

    Ari Markus Aaltonen (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  124. The 3rd International Seminar on Maintenance, Condition Monitoring and Diagnostics, September 29th-30th, 2010, Pohto, Oulu, Finland

    Jari Rinkinen (Member)
    2010

    Activity: Participating in or organising an eventMembership of a scientific or program committee of a conference or seminar

  125. Tieteen johtotähdet

    Markku Kivikoski (Interviewee)
    2010

    Activity: OtherMedia appearance

  126. Tieteen johtotähdet

    Viljo Markus Pessa (Interviewee)
    2010

    Activity: OtherMedia appearance

  127. Tieteen johtotähdet

    Jaakko Astola (Interviewee)
    2010

    Activity: OtherMedia appearance

  128. Tieteen johtotähdet

    Matti Vilenius (Interviewee)
    2010

    Activity: OtherMedia appearance

  129. Virtuaaliset konelaboratoriot koneenrakennus- ja prosessiteollisuuden osaamisen kehittämisen palvelujen keskiössä

    Ossi Nykänen (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  130. Virtuaaliset konelaboratoriot koneenrakennus- ja prosessiteollisuuden osaamisen kehittämisen palvelujen keskiössä

    Pekka Ranta (Speaker)
    2010

    Activity: Talk or presentationConference presentation

  131. 2011
  132. An implementation of a semantic, web-based virtual machine laboratory prototyping environment

    Tuija Maria Kristiina Palonen (Speaker)
    2011

    Activity: Talk or presentationConference presentation

  133. An implementation of a semantic, web-based virtual machine laboratory prototyping environment

    Kari Koskinen (Speaker)
    2011

    Activity: Talk or presentationConference presentation

  134. An implementation of a semantic, web-based virtual machine laboratory prototyping environment

    Ossi Nykänen (Speaker)
    2011

    Activity: Talk or presentationConference presentation

  135. An implementation of a semantic, web-based virtual machine laboratory prototyping environment

    Markus Rokala (Speaker)
    2011

    Activity: Talk or presentationConference presentation

  136. An implementation of a semantic, web-based virtual machine laboratory prototyping environment

    Jaakko Tapio Antero Salonen (Speaker)
    2011

    Activity: Talk or presentationConference presentation

  137. An implementation of a semantic, web-based virtual machine laboratory prototyping environment

    Juha Nurmi (Speaker)
    2011

    Activity: Talk or presentationConference presentation

  138. An implementation of a semantic, web-based virtual machine laboratory prototyping environment

    Vänni Tapani Alarotu (Speaker)
    2011

    Activity: Talk or presentationConference presentation

  139. An implementation of a semantic, web-based virtual machine laboratory prototyping environment

    Matti Henrik Antero Helminen (Speaker)
    2011

    Activity: Talk or presentationConference presentation

  140. An implementation of a semantic, web-based virtual machine laboratory prototyping environment

    Pekka Ranta (Speaker)
    2011

    Activity: Talk or presentationConference presentation

  141. Fimecc palkitsi digihydrauliikasta

    Matti Linjama (Interviewee)
    2011

    Activity: OtherMedia appearance

  142. Hyötysuhde ylös, kulutus alas - Digitaalinen hydrauliikka

    Matti Vilenius (Interviewee)
    2011

    Activity: OtherMedia appearance

  143. International Journal of Computer Aided Engineering and Technology (Journal)

    Kari Koskinen (Reviewer)
    2011

    Activity: Publication peer-review and editorial workReviewer of Scientific Journal

  144. Journal of Fluids Engineering: Transactions of the ASME (Journal)

    Kari Koskinen (Reviewer)
    2011

    Activity: Publication peer-review and editorial workReviewer of Scientific Journal

  145. Lentokaluston hydrauliikan kunnonvalvontajärjestelmä

    Tomi Krogerus (Speaker)
    2011

    Activity: Talk or presentationConference presentation

  146. Lentokaluston hydrauliikan kunnonvalvontajärjestelmä

    Jussi Aaltonen (Speaker)
    2011

    Activity: Talk or presentationConference presentation

  147. Liikkuvan työkoneen työhydrauliikan älykäs kunnonvalvonta

    Tomi Krogerus (Speaker)
    2011

    Activity: Talk or presentationConference presentation

  148. Mechatronics (Journal)

    Matti Linjama (Reviewer)
    2011

    Activity: Publication peer-review and editorial workReviewer of Scientific Journal

  149. Menetelmiä huoltojen suunnitteluun ja vikojen ehkäisemiseen

    Tomi Krogerus (Interviewee)
    2011

    Activity: OtherMedia appearance

  150. Menetelmiä hydraulijärjestelmien huoltojen suunnitteluun ja vikojen ehkäisemiseen

    Tomi Krogerus (Interviewee)
    2011

    Activity: OtherMedia appearance

  151. Poralaitteen kokonaismalli toimii pian virtuaaliympäristössä

    Pekka Ranta (Interviewee)
    2011

    Activity: OtherMedia appearance

  152. Poralaitteen kokonaismalli toimii pian virtuaaliympäristössä

    Kari Koskinen (Interviewee)
    2011

    Activity: OtherMedia appearance

  153. Proceedings of the institution of Mechanical Engineers Part C: Journal of Mechanical Engineering Science (Journal)

    Matti Linjama (Reviewer)
    2011

    Activity: Publication peer-review and editorial workReviewer of Scientific Journal

  154. Proceedings of the institution of Mechanical Engineers Part C: Journal of Mechanical Engineering Science (Journal)

    Kari Koskinen (Reviewer)
    2011

    Activity: Publication peer-review and editorial workReviewer of Scientific Journal

  155. Semanttinen mallinnus avaa uusia mahdollisuuksia kilpailukyvyn lisäämiseksi

    Tuija Maria Kristiina Palonen (Interviewee)
    2011

    Activity: OtherMedia appearance

  156. Semanttinen mallinnus avaa uusia mahdollisuuksia kilpailukyvyn lisäämiseksi

    Pekka Ranta (Interviewee)
    2011

    Activity: OtherMedia appearance

  157. Semanttinen mallinnus avaa uusia mahdollisuuksia kilpailukyvyn lisäämiseksi

    Ossi Nykänen (Interviewee)
    2011

    Activity: OtherMedia appearance

  158. Simulation study - improving efficiency in mobile boom by using digital hydraulic power management system

    Mikko Heikkilä (Invited lecturer)
    2011

    Activity: Talk or presentationInvited lecture

  159. Simulation study - improving efficiency in mobile boom by using digital hydraulic power management system

    Matti Karvonen (Invited lecturer)
    2011

    Activity: Talk or presentationInvited lecture

  160. Tribology International (Journal)

    Kari Koskinen (Reviewer)
    2011

    Activity: Publication peer-review and editorial workReviewer of Scientific Journal

  161. TTY tuottaa maailmanluokan osaamista automaatioon ja hydrauliikkaan

    Kalevi Huhtala (Interviewee)
    2011

    Activity: OtherMedia appearance

  162. 2012
  163. A Potential Field and Bug Compound Navigation Algorithm for Nonholonomic Wheeled Robots

    Ji Wung Choi (Speaker)
    2012

    Activity: Talk or presentationConference presentation

  164. Bath/ASME Fluid Power & Motion Control Symposium, FPMC 2012, 12-14 September 2012 (Journal)

    Lauri Siivonen (Reviewer)
    2012

    Activity: Publication peer-review and editorial workReviewer of Conference Article

  165. Breaking down the requirements: reliability in remote handling software

    Pekka Alho (Speaker)
    2012

    Activity: Talk or presentationConference presentation

  166. Breaking down the requirements: reliability in remote handling software

    Jouni Mattila (Speaker)
    2012

    Activity: Talk or presentationConference presentation

  167. Divertor Cassette Locking System Remote Handling Trials with WHMAN at DTP2

    Jouni Mattila (Speaker)
    2012

    Activity: Talk or presentationConference presentation

  168. Divertor Cassette Locking System Remote Handling Trials with WHMAN at DTP2

    Ville Lyytikäinen (Speaker)
    2012

    Activity: Talk or presentationConference presentation

  169. Divertor Cassette Locking System Remote Handling Trials with WHMAN at DTP2

    Pasi Kinnunen (Speaker)
    2012

    Activity: Talk or presentationConference presentation

  170. Divertor Cassette Locking System Remote Handling Trials with WHMAN at DTP2

    Janne Koivumäki (Contributor)
    2012

    Activity: Talk or presentationConference presentation

  171. Energy Conversion and Management (Journal)

    Jari Rinkinen (Reviewer)
    2012

    Activity: Publication peer-review and editorial workReviewer of Scientific Journal

  172. Hydrauliikka- ja Pneumatiikkayhdistyksen stipendin sai Mika Sahlman

    Mika Joonas Petteri Sahlman (Interviewee)
    2012

    Activity: OtherMedia appearance

  173. Hydraulikomponenttien puhtausvalvontastandardit

    Jari Rinkinen (Speaker)
    2012

    Activity: Talk or presentationConference presentation

  174. IEEE - ASME Transactions on Mechatronics (Journal)

    Jouni Mattila (Editor)
    2012

    Activity: Publication peer-review and editorial workMembership of an editorial board

  175. Interoperability of Remote Handling Control System Software Modules at DTP2 Using Middleware

    Janne Tuominen (Speaker)
    2012

    Activity: Talk or presentationConference presentation

  176. Interoperability of Remote Handling Control System Software Modules at DTP2 Using Middleware

    Teemu Ilmari Rasi (Speaker)
    2012

    Activity: Talk or presentationConference presentation

  177. Interoperability of Remote Handling Control System Software Modules at DTP2 Using Middleware

    Jouni Mattila (Speaker)
    2012

    Activity: Talk or presentationConference presentation

  178. Journal of Dynamic Systems, Measurement and Control: Transactions of the ASME (Journal)

    Kari Koskinen (Reviewer)
    2012

    Activity: Publication peer-review and editorial workReviewer of Scientific Journal

  179. Lubrication Science (Journal)

    Kari Koskinen (Reviewer)
    2012

    Activity: Publication peer-review and editorial workReviewer of Scientific Journal

  180. Mining machines get smart

    Kalevi Huhtala (Interviewee)
    2012

    Activity: OtherMedia appearance

  181. Proceedings of the institution of Mechanical Engineers Part C: Journal of Mechanical Engineering Science (Journal)

    Kalevi Huhtala (Reviewer)
    2012

    Activity: Publication peer-review and editorial workReviewer of Scientific Journal

  182. Proceedings of the Institution of Mechanical Engineers, Part E, Journal of Process Mechanical Engineering (Journal)

    Kari Koskinen (Reviewer)
    2012

    Activity: Publication peer-review and editorial workReviewer of Scientific Journal

  183. Semantic modelling and simulations enhance the design of machine systems

    Pekka Ranta (Interviewee)
    2012

    Activity: OtherMedia appearance

  184. Tekniske universitetet i Tampere, Institutt for intelligent hydraulikk og automasjon (IHA)

    Jari Rinkinen (Interviewee)
    2012

    Activity: OtherMedia appearance

  185. The Fifth Workshop on Digital Fluid Power, October 24-25, 2012, Tampere, Finland

    Miikka Ketonen (Organiser)
    2012

    Activity: Participating in or organising an eventOrganization of a workshop, panel, session or tutorial

  186. The Fifth Workshop on Digital Fluid Power, October 24-25, 2012, Tampere, Finland

    Matti Karvonen (Organiser)
    2012

    Activity: Participating in or organising an eventOrganization of a workshop, panel, session or tutorial

  187. The Fifth Workshop on Digital Fluid Power, October 24-25, 2012, Tampere, Finland

    Mika Joonas Petteri Sahlman (Organiser)
    2012

    Activity: Participating in or organising an eventOrganization of a workshop, panel, session or tutorial

  188. The Fifth Workshop on Digital Fluid Power, October 24-25, 2012, Tampere, Finland

    Tuomas Valtteri Salomaa (Organiser)
    2012

    Activity: Participating in or organising an eventOrganization of a workshop, panel, session or tutorial

  189. The Fifth Workshop on Digital Fluid Power, October 24-25, 2012, Tampere, Finland

    Arto Laamanen (Organiser)
    2012

    Activity: Participating in or organising an eventOrganization of a workshop, panel, session or tutorial

  190. The Fifth Workshop on Digital Fluid Power, October 24-25, 2012, Tampere, Finland

    Mikko Huova (Organiser)
    2012

    Activity: Participating in or organising an eventOrganization of a workshop, panel, session or tutorial

  191. The Fifth Workshop on Digital Fluid Power, October 24-25, 2012, Tampere, Finland

    Vänni Tapani Alarotu (Organiser)
    2012

    Activity: Participating in or organising an eventOrganization of a workshop, panel, session or tutorial

  192. The Fifth Workshop on Digital Fluid Power, October 24-25, 2012, Tampere, Finland

    Miika Paloniitty (Organiser)
    2012

    Activity: Participating in or organising an eventOrganization of a workshop, panel, session or tutorial

  193. The Fifth Workshop on Digital Fluid Power, October 24-25, 2012, Tampere, Finland

    Mikko Heikkilä (Organiser)
    2012

    Activity: Participating in or organising an eventOrganization of a workshop, panel, session or tutorial

  194. The Fifth Workshop on Digital Fluid Power, October 24-25, 2012, Tampere, Finland

    Jyrki Tammisto (Organiser)
    2012

    Activity: Participating in or organising an eventOrganization of a workshop, panel, session or tutorial

  195. The Fifth Workshop on Digital Fluid Power, October 24-25, 2012, Tampere, Finland

    Matti Linjama (Organiser)
    2012

    Activity: Participating in or organising an eventOrganization of a workshop, panel, session or tutorial

  196. The Fift Workshop on Digital Fluid Power, October 24-25, 2012, Tampere, Finland

    Matti Linjama (Chair)
    2012

    Activity: Participating in or organising an eventChair of workshop, panel, session or tutorial

  197. The Fift Workshop on Digital Fluid Power, October 24-25, 2012, Tampere, Finland

    Lauri Siivonen (Chair)
    2012

    Activity: Participating in or organising an eventChair of workshop, panel, session or tutorial

  198. The Fift Workshop on Digital Fluid Power, October 24-25, 2012, Tampere, Finland

    Kalevi Huhtala (Chair)
    2012

    Activity: Participating in or organising an eventChair of workshop, panel, session or tutorial

  199. TTY tuottaa maailmanluokan osaamista automaatioon ja hydrauliikkaan

    Kalevi Huhtala (Interviewee)
    2012

    Activity: OtherMedia appearance

  200. Väitöskirjan vastaväittäjä, Opponent of doctoral

    Kalevi Huhtala (Examiner)
    2012

    Activity: ExaminationPre-examination of dissertation or acting as opponent to doctoral students

  201. Wear (Journal)

    Kari Koskinen (Reviewer)
    2012

    Activity: Publication peer-review and editorial workReviewer of Scientific Journal

  202. Opponent of Dissertation: Väitöskirjan vastaväittäjä: Manninen, T., Fault simulator and detection for a process control valve

    Jouni Mattila (Examiner)
    30 Nov 2012

    Activity: ExaminationPre-examination of dissertation or acting as opponent to doctoral students

  203. Opponent of Dissertation: Vastaväittäjä: Timo Manninen , Fault simulator and detection for a process control valve

    Kari Koskinen (Examiner)
    30 Nov 2012

    Activity: ExaminationPre-examination of dissertation or acting as opponent to doctoral students

ID: 21447