Tampere University of Technology

TUTCRIS Research Portal

Department of Intelligent Hydraulics and Automation

Research unit: Department

  1. Published

    Real-time markerless Augmented Reality for Remote Handling system in bad viewing conditions

    Ziaei, Z., Hahto, A., Mattila, J., Siuko, M. & Semeraro, L., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 2033-2038

    Research output: Contribution to journalArticleScientificpeer-review

  2. Published

    Analysis and control of a high precision water hydraulic manipulator

    Zhai, L., Virvalo, T., Mattila, J. & Saarinen, H., 2009, The 11th Scandinavian International Conference on Fluid Power SICFP'09, Linköping, Sweden, June 2-4 2009. p. 11 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  3. Published

    Robust control of Cassette Multi-functional Mover for ITER remote handling tasks

    Zhai, L., Mattila, J., Saarinen, H. & Virvalo, T., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 2008-2011

    Research output: Contribution to journalArticleScientificpeer-review

  4. Published

    Modelling and robust control of a hydraulic servo system

    Zhai, L., Mattila, J. & Virvalo, T., 2010, Proceedings of the Post-Graduate Workshop on Intelligent Machines and Transport Systems, May 3-7, 2010, CERN, Switzerland. Karvinen, T. & Keskinen, E. (eds.). p. 156-167

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  5. Published

    A survey on control of hydraulic servo systems

    Zhai, L. & Virvalo, T., 2008, Fourth Arctic-Mediterranean Post Graduate Workshop on Intelligent Machines and Transport Systems, June 23-27, 2008, Saariselkä, Finland. Karvinen, T. & Keskinen, E. (eds.). p. 5 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  6. Published

    Modelling and Robust Control of Hydraulic Manipulators

    Zhai, L., 2012, Tampere: Tampere University of Technology. 98 p. (Tampere University of Technology. Publication; no. 1069)

    Research output: Book/ReportDoctoral thesisMonograph

  7. Published

    Modelling, simulation and control of a water hydraulic manipulator

    Zhai, L., Virvalo, T. & Mattila, J., 2009, Proceedings of the Seventh International Conference on Fluid Power Transmission and Control, ICFP 2009, April 7-10, 2009, Hangzhou, China. Lu, Y., Wang, Q., Li, W. & Ju, B. (eds.). p. 485-489

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  8. Published

    Analysis and control of a single leg for hydraulically actuated quadruped robot

    Xia, Y., Aaltonen, J. & Koskinen, K. T., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Tampere: Scandinavian International Conference on Fluid Power, p. 149-160 (Scandinavian International Conference on Fluid Power SICFP; vol. 12, no. 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  9. Published

    Digital Hydraulic Cylinder Drive For Folding Cargo Hatches

    Westerlund, S. & Mäkinen, E., 2012, Proceedings of the 7th FPNI PhD Symposium on Fluid Power, University of Modena and Reggio Emilia, June 27-30, 2012, Reggio Emilia, Italy. Milani, M., Montorsi, L. & Paltrinieri, F. (eds.). Fluid Power Net International, p. 235-248 (Fluid Power Net International PhD Symposium; vol. 7).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  10. Published

    Self contained hydraulic module for cylinder driven applications

    Westerlund, S., Mäkinen, E. & Sinivaara, M., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Sairala, H. & Koskinen, K. T. (eds.). Tampere: Scandinavian International Conference on Fluid Power, p. 291-300 (Scandinavian International Conference on Fluid Power SICFP; vol. 12, no. 3).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  11. Published

    Modelling of hydraulics and mechanics of a mobile machine

    Vuohijoki, A., Hyvönen, M., Huhtala, K. & Vilenius, M., 2008, Fluid Power and Motion Control FPMC 2008, 10-12 September 2008, Bath, UK. Johnston, D. N. & Plummer, A. R. (eds.). p. 105-118 14 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  12. Published

    Comparison of tracking controllers of hydraulic cylinder drive by simulations

    Virvalo, T., 2008, Proceedings of the 7th International Conference on Machine Automation ICMA2008, Service Robotics and Mechatronics, September 24-26, 2008, Awaji, Japan. p. 37-40

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  13. Published

    Comparing controllers in pneumatic cylinder motion control

    Virvalo, T. & Mäkinen, E., 2008, Proceedings of the 6th International Fluid Power Conference Dresden, Fluid Power in Motion, 6iFK, April 1.-2.2008, Dresden. p. 289-304

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  14. Published

    Hydrauliikan online -kunnonvalvonta

    Virta, P., 2009, Lentotekniikan rakennetutkimuksen neuvottelupäivät VII, 27.-28.8.2009, Tampere. Aaltonen, J. (ed.). p. 1-11 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  15. Published

    Experiences of monitoring the condition of military aircraft hydraulic systems

    Virta, P., Aaltonen, J., Koskinen, K. T. & Vilenius, M., 2010, In : Condition Monitor. 280, p. 9-14

    Research output: Contribution to journalArticleProfessional

  16. Published

    Experiences on the condition monitoring of military aircraft hydraulic systems

    Virta, P., Aaltonen, J., Koskinen, K. T. & Vilenius, M., 2009, The Sixth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, Dublin, Ireland, 23-25 June 2009. p. 753-764

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  17. Published

    Simulation model of hydraulic power transmission of teleoperated mobile machine and Development and Research Work of Advanced Velocity Control via Simulations

    Vilenius, J. & Huhtala, K., 2008, Proceedings of the 6th International Fluid Power Conference Dresden, Fluid Power in Motion, 6iFK, April 1.-2.2008, Dresden. p. 85-100

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  18. Published

    IHA digitaalihydrauliikalla maailman ykköseksi

    Vilenius, M., 2009, In : Fluid Finland. p. s. 5

    Research output: Contribution to journalArticleProfessional

  19. Published

    Moisture and Bio-deterioration Risk of Building Materials and Structures

    Viitanen, H., Vinha, J., Salminen, K., Ojanen, T., Peuhkuri, R., Paajanen, L. & Lähdesmäki, K., 2010, In : Journal of Building Physics. 33, 3, p. 201-224 24 p.

    Research output: Contribution to journalArticleScientificpeer-review

  20. Published

    Predicting the runtime reliability of ITER Remote Handling maintenance equipment

    Väyrynen, J., Mattila, J., Vilenius, M., Ali, M., Valkama, P., Siuko, M. & Semeraro, L., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 2012-2015

    Research output: Contribution to journalArticleScientificpeer-review

  21. Published

    On design and development of additional End-Effectors for the Cassette Multifunctional Mover

    Valkama, P., Mattila, J., Amjad, F., Väyrynen, J., Vilenius, M., Siuko, M., Semeraro, L. & Esque, S., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 1946-1949

    Research output: Contribution to journalArticleScientificpeer-review

  22. Published

    Novel bistable hammer valve for digital hydraulics

    Uusitalo, J-P., Ahola, V., Söderlund, L., Linjama, M., Juhola, M. & Kettunen, L., 2010, In : International Journal of Fluid Power. 11, 3, p. 35-44

    Research output: Contribution to journalArticleScientificpeer-review

  23. Published

    Dynamic analysis of a bistable actuator for digital hydraulics

    Uusitalo, J-P., Söderlund, L., Kettunen, L., Linjama, M. & Vilenius, M., 2009, In : IET Science Measurement and Technology. 3, 3, p. 235-243

    Research output: Contribution to journalArticleScientificpeer-review

  24. Published

    New digital electrohydraulic valve package

    Uusitalo, J-P., Ahola, V., Söderlund, L. & Kettunen, L., 2010, Proceedings of the Third Workshop on Digital Fluid Power, October 13-14, 2010, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). p. 39-59

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  25. Published

    Novel bistable hammer valve for digital hydraulics

    Uusitalo, J-P., Söderlund, L., Kettunen, L., Ahola, V. & Linjama, M., 2009, Proceedings of The Second Workshop on Digital Fluid Power, 12-13 November 2009, Linz, Austria. Scheidl, R. & Winkler, B. (eds.). p. 33-48

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  26. Published

    Analysis of effect of remote control on usability of hydraulic mobile machines

    Uusisalo, J. & Huhtala, K., 2011, Proceedings of the 8th JFPS International Symposium on Fluid Power, Okinawa 2011, October 25-28, 2011, Okinawa, Japan. Okinawa: JFPS international Symposium on Fluid Power, p. 688-695 (International Symposium on Fluid Power JFPS).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  27. Published

    Experimental study on effects of remote control and control system distribution in hydraulic mobile machines

    Uusisalo, J. & Huhtala, K., 2010, Proceedings of the Post-Graduate Workshop on Intelligent Machines and Transport Systems, May 3-7, 2010, CERN, Switzerland. Karvinen, T. & Keskinen, E. (eds.). p. 1-11 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  28. Published

    A Case Study on Effects of Remote Control and Control System Distribution in Hydraulic Mobile Machines

    Uusisalo, J., 2011, Tampere: Tampere University of Technology. 111 p. (Tampere University of Technology. Publication; vol. 960)

    Research output: Book/ReportDoctoral thesisMonograph

  29. Published

    Assisting force feedback function for hand-held remote control of excavator

    Uusisalo, J., Karhu, O. & Huhtala, K., 2008, Proceedings of the 7th JFPS International Symposium on Fluid Power, Toyama, September 15-18, 2008. Tanaka, Y. (ed.). p. 653-658

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  30. Published

    A hand-held remote control as a user interface for a hydraulic mobile machine with an excavator

    Uusisalo, J., Karhu, O. & Huhtala, K., 2008, Proceedings of the 51st National Conference on Fluid Power March 12-14, 2008, IFPE 2008, Las Vegas, USA. p. 405-411

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  31. Published

    Effects of remote control on usability of hydraulic excavator

    Uusisalo, J., Huhtala, K. & Vilenius, M., 2009, Proceedings of the ASME 2009 Dynamic Systems and Control Conference (DSCC2009) October 12-14, 2009, Hollywood, California, USA. p. 8 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  32. Published

    Experimental study on control system distribution and effects of remote control in hydraulic mobile machines

    Uusisalo, J., 2010, Proceedings of the 3rd GIM Scientific Workshop, February 17-18, 2010, Aalto University School of Science and Technology. Halme, A. & Pirttioja, T. (eds.). p. 1-11 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  33. Published

    A new kind of piston pump to hydraulic power systems

    Uusi-Heikkilä, J., 2009, The Second Workshop on Generic Intelligent Machines, May 14-15, 2009, Tampere University of Technology, Tampere, Finland. Huhtala, K. & Uusi-Heikkilä, J. (eds.). p. 12 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  34. Published

    Command and Control application framework for interoperable heterogeneous ITER Remote Handling devices

    Tuominen, J., Muhammad, A., Mattila, J., Aha, L., Saarinen, H., Siuko, M., Hamilton, D. & Semerero, L., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 2067-2070

    Research output: Contribution to journalArticleScientificpeer-review

  35. Published

    Hydrauliikan vianetsintä -säästöä systemaattisella toiminnalla

    Törmänen, R., Räihä, K. & Rinkinen, J., 2011, In : Promaint. 25, 5, p. 50-53 4 p.

    Research output: Contribution to journalArticleProfessional

  36. Published

    Energy Saving with Pump Control in Working Hydraulics

    Tikkanen, R., Ahola, V. & Uusi-Heikkilä, J., 2012, GIM - Generic Intelligent Machines, Proceedings of the 6th GIM Scientific Workshop, November 7-8, 2012, Tampere, Finland. Huhtala, K. & Uusi-Heikkilä, J. (eds.). Tampere: Tampere University of Technology. Department of Intelligent Hydraulics and Automation, p. 77-81 (GIM Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  37. Published

    Measured characteristics of an in-line pump with independently controlled pistons

    Tammisto, J., Huova, M., Heikkilä, M., Linjama, M. & Huhtala, K., 2010, 7th International Fluid Power Conference (7th IFK), 22-24 March 2010, Aachen, Germany. p. 1-12 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  38. Published

    Validation of divertor cassette locking system with a hydraulic jack tool

    Takalo, V., Esque, S., Mattila, J., Vilenius, M., Järvenpää, J., Siuko, M., Semeraro, L., Irving, M. & Damiani, C., 2009, In : Fusion Engineering and Design. 84, 2-6, p. 1808-1812

    Research output: Contribution to journalArticleScientificpeer-review

  39. Published

    Utilization of wireless battery-free sensors for hydraulic system condition monitoring

    Soini, M., Huvila, T., Mäkinen, E., Sydänheimo, L., Vilenius, M. & Kivikoski, M., 2008, Mechatronics 2008, Proceedings of the 11th Mechatronics Forum Biennial International Conference, University of Limerick, Ireland, 23-25.6.2008. Toal, D. (ed.). p. 6

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  40. Published

    Divertor RH design updates and DTP2 Phase 2 testing

    Siuko, M., Järvenpää, J. & Mattila, J., 2011, Espoo: VTT. 6 p. (VTT Publications; vol. 764)

    Research output: Book/ReportCommissioned reportProfessional

  41. Published

    2008-2009 Host Activities Related to DTP2 Test Facility Operation and Upgrade Preparation

    Siuko, M., Järvenpää, J. & Mattila, J., 2009, VTT. 10 p. (VTT Publications; vol. 709)

    Research output: Book/ReportCommissioned reportProfessional

  42. Published

    2008-2010 Host Activities Related to DTP2 Test Facility Operation and Upgrade Preparation

    Siuko, M., Järvenpää, J. & Mattila, J., 2011, Valtion teknillinen tutkimuslaitos. 11 p. (VTT Publications; vol. 764)

    Research output: Book/ReportCommissioned reportProfessional

  43. Published

    2008-2009 Host Activities Related to DTP2 Test Facility Operation and Upgrade Preparation

    Siuko, M., Järvenpää, J. & Mattila, J., 2010, VTT. 12 p. (VTT Publications; vol. 738)

    Research output: Book/ReportCommissioned reportProfessional

  44. Published

    Fault Tolerance with digital Hydraulic Valve System

    Siivonen, L., Linjama, M. & Vilenius, M., 2011, The Eight International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 20-22 June 2011, Cardiff, Wales. Northamption: British Institute of Non-destructive Testing, p. 1250-1262 (International Conference on Condition Monitoring and Machinery Failure Prevention Technologies; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  45. Published

    Digitaalinen Hydraulisäätö - tulevaisuuden tekniikkaa?

    Siivonen, L., 2012, In : Promaint. 26, 7, p. 41-43

    Research output: Contribution to journalArticleProfessional

  46. Published

    Accurate flow control with digital valve system

    Siivonen, L., Linjama, M., Vilenius, M. & Anttonen, P., 2008, Proceedings of the 51st National Conference on Fluid Power March 12-14, 2008, IFPE 2008, Las Vegas, USA. p. 287-294

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  47. Published

    Jammed on/off valve fault compensation with distributed digital valve system

    Siivonen, L., Linjama, M., Huova, M. & Vilenius, M., 2009, In : International Journal of Fluid Power. 10, 2, p. 73-82

    Research output: Contribution to journalArticleScientificpeer-review

  48. Published

    Detecting of faults in a valve system and a fault tolerant control

    Siivonen, L. & Linjama, M., 2012, Patent No. Pat. US 8215227 B2, Priority date 10 Jul 2012, Priority No. (21) 11/991559;(30) FI 20055479

    Research output: PatentScientific

  49. Published

    Fault tolerant digital valve system and fault tolerant control

    Siivonen, L., 2008, Proceedings of the First Workshop on Digital Fluid Power 3rd October, 2008, Tampere, Finland. Linjama, M. & Laamanen, A. (eds.). p. 77-88

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  50. Published

    Verification and Validation of ITER Remote handling System Requirment Using Digital Mocks-Ups

    Sibois, R., Salminen, K., Siuko, M. & Mattila, J., 2011, European Nuclear Young Generation Forum, ENYGF 2011, 17.5.-22.5.2011, Praha. Prague: ENYGF, p. 1-4 4 p. (European Nuclear Young Generation Forum ENYGF).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  51. Published

    Development of Remote Handling Pipe Jointing Tools for ITER

    Shuff, R. E., 30 Mar 2012, Tampere University of Technology. 148 p. (Tampere University of Technology. Publication; vol. 1026)

    Research output: Book/ReportDoctoral thesisMonograph

  52. Published

    Is the future of fluid power digital?

    Scheidl, R., Linjama, M. & Schmidt, S., 2012, In : Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering. 226, 6, p. 721-723

    Research output: Contribution to journalArticleScientificpeer-review

  53. Published

    An implementation of a semantic, web-based virtual machine laboratory prototyping environment

    Salonen, J., Nykänen, O., Ranta, P., Nurmi, J., Helminen, M., Rokala, M., Palonen, T., Alarotu, V., Koskinen, K. & Pohjolainen, S., 2011, In : Lecture Notes in Computer Science. 7032, p. 221-236

    Research output: Contribution to journalArticleScientificpeer-review

  54. Published

    Categorization of ITER remote handling operations

    Salminen, K., Aha, L., Saarinen, H., Siuko, M., Mattila, J. & Semeraro, L., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 2075-2077

    Research output: Contribution to journalArticleScientificpeer-review

  55. Published

    Status of DTP2 - Test Facility for ITER Divertor Maintenance

    Salminen, K., Siuko, M., Karjalainen, J., Sibois, R. & Mattila, J., 2011, European Nuclear Young Generation Forum, ENYGF 2011, 17.5.-22.5.2011, Praha. Prague: ENYGF, p. 1-6 6 p. (European Nuclear Young Generation Forum ENYGF).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  56. Published

    Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland

    Sairiala, H. (ed.) & Koskinen, K. T. (ed.), 2011, Tampere: Tampere University of Technology.

    Research output: Book/ReportAnthologyScientificpeer-review

  57. Published

    Vesihydrauliikan sovelluksia

    Sairiala, H. & Koskinen, K. T., 2008, In : Fluid Finland. p. 15-17

    Research output: Contribution to journalArticleProfessional

  58. Published

    Proportional valve control of water-hydraulic systems

    Sairiala, H. & Koskinen, K. T., 2012, Topic water hydraulics, Dutch Fluid Power Conference, Ede, The Netherlands 13th September 2012. Vereniging Platform Hydrauliek, p. 49-63 (Dutch Fluid Power Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  59. Published

    Control and actuator synchronization of water hydraulic 6-DOF motion platform

    Sairiala, H., Rokala, M. & Koskinen, K. T., 2008, Proceedings of the 51st National Conference on Fluid Power March 12-14, 2008, IFPE 2008, Las Vegas, USA. p. 345-350

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  60. Published

    Elintarviketeollisuuden koneautomaation kehitys kaipaa tiivistämistä

    Sairiala, H. & Koskinen, K. T., 2012, In : Kehittyvä elintarvike. 23, 4, p. 12-13

    Research output: Contribution to journalArticleProfessional

  61. Published

    Optimized hardware design for the divertor remote handling control system

    Saarinen, H., Tiitinen, J., Aha, L., Muhammad, A., Mattila, J., Siuko, M., Vilenius, M., Järvenpää, J., Irving, M., Damiani, C. & Semeraro, L., 2009, In : Fusion Engineering and Design. 84, 2-6, p. 1666-1670

    Research output: Contribution to journalArticleScientificpeer-review

  62. Published

    Results of CMM standalone tests at DTP2

    Saarinen, H., Kivelä, T., Zhai, L., Hämäläinen, V., Karjalainen, J-P., Aha, L., Heikkilä, L., Mäkinen, H., Järvenpää, J., Kiviranta, S., Krassi, B., Viinikainen, M., Siuko, M., Mattila, J., Esque, S. & Semeraro, L., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 1907-1910

    Research output: Contribution to journalArticleScientificpeer-review

  63. Published

    Driving feel generation of the mobile machine simulator with the water hydraulic 6-DOF motion platform

    Rokala, M., Sairiala, H. & Koskinen, K. T., 2010, 7th International Fluid Power Conference (7th IFK), 22-24 March 2010, Aachen, Germany. p. 1-12 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  64. Published

    Study of lubrication conditions in slipper-swashplate contact in water hydraulic axial piston pump test rig

    Rokala, M., Calonius, O., Koskinen, K. T. & Pietola, M., 2008, Proceedings of the 7th JFPS International Symposium on Fluid Power, September 15-18, 2008, Toyama, Japan. Tanaka, Y. (ed.). p. 91-94

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  65. Published

    The effect of pc-rate on peek-made slipper behaviour in water hydraulic axial piston unit

    Rokala, M. & Koskinen, K., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Tampere: Scandinavian International Conference on Fluid Power, p. 89-102 14 p. (Scandinavian International Conference on Fluid Power SICFP; vol. 12, no. 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  66. Published

    Tribological conditions between swashplate and slipper pad in variable displacement water hydraulic axial piston unit

    Rokala, M., Calonius, O., Koskinen, K. T. & Pietola, M., 2008, Proceedings of the 6th International Fluid Power Conference Dresden, Fluid Power in Motion, 6iFK, April 1.-2.2008, Dresden. p. 301-314

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  67. Published

    Analysis of Slipper Structures in Water Hydraulic Axial Piston Pumps

    Rokala, M., 2012, Tampere: Tampere University of Technology. (Tampereen teknillinen yliopisto, Julkaisu; no. 1055)

    Research output: Book/ReportDoctoral thesisMonograph

  68. Published

    Comparison of slipper structures in water hydraulic axial piston pump

    Rokala, M. & Koskinen, K. T., 2010, 6th FPNI-PhD Symposium, June 15-19, 2010, West Lafayette, USA.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  69. Published

    Theoretical backround of a new reservoir design for circulating oil lubrication system

    Rinkinen, J., 2008, Ninth International Tribology Conference of the South Africa Institute of Tribology, 2-4 April 2008, Tribology 2008, SAIT. Vaal, PL. & Fuller, G. (eds.). p. 1-12 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  70. Published

    Hydrauliikan komponenttipuhtausstandardien hyödyntäminen suomalaisessa konepajateollisuudessa

    Rinkinen, J., 2010, In : Fluid Finland. 1/2010, p. 18-23

    Research output: Contribution to journalArticleScientific

  71. Published

    Versatile maintenance solutions in oil related systems

    Rinkinen, J., 2011, In : Condition Monitor. 296, p. 5-12

    Research output: Contribution to journalArticleProfessional

  72. Published

    Nya standarder i Finland för hur industrihydrauliksystem skall upphandlas

    Rinkinen, J. & Viertävä, J., 2008, In : Fluid Scandinavica, Specialtidningen för hydraulik/pneumatik. 1, p. 35-36

    Research output: Contribution to journalArticleProfessional

  73. Published

    Condition monitoring and in-line maintenance of oil in circulating lubrication system

    Rinkinen, J., 2010, Proceedings of the 3rd International Seminar Maintenance, Condition Monitoring and Diagnostics, September 29-30, 2010, Pohto, Oulu, Finland. Lahdelma, S. & Palokangas, K. (eds.). p. 136-151

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  74. Published

    Kehitystä putkistopassin koulutusmateriaaliin

    Rinkinen, J. & Virta, S., 2010, In : Fluid Finland. 1/2010, p. 28-30

    Research output: Contribution to journalArticleScientific

  75. Published

    Recent advances in standardisation and education of fluid power in Finland

    Rinkinen, J., Lahtinen, J. & Virta, S., 2011, In : Maintworld, Maintenance & Asset Management. 3, 2, p. 14-18

    Research output: Contribution to journalArticleProfessional

  76. Published

    Putkistopasseja TTY/IHA:n henkilökunnalle

    Rinkinen, J., 2009, In : Fluid Finland. 2/2009, p. 24-27

    Research output: Contribution to journalArticleProfessional

  77. Published

    Etelä-Afrikan Tribologia 2008 -konferenssi

    Rinkinen, J. & Löppönen, M., 2008, In : Fluid Finland. p. 20-23

    Research output: Contribution to journalArticleProfessional

  78. Published

    Hydraulikomponenttien ja -järjestelmien puhtausvalvontastandardien nykytila

    Rinkinen, J., 2009, In : Fluid Finland. 3-4, p. 32-38

    Research output: Contribution to journalArticleProfessional

  79. Published

    Versatile Maintenance Solutions in Oil Related Systems

    Rinkinen, J., 2011, The Eight International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 20-22 June 2011, Cardiff, Wales. Northamption: British Institute of Non-destructive Testing, p. 1234-1249 (International Conference on Condition Monitoring and Machinery Failure Prevention Technologies; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  80. Published

    Hydraulikomponenttien puhtausvalvontastandardien nykytilanne

    Rinkinen, J., 2009, PAMAS 2009 käyttäjäpäivät 10.-11.2.2009, Öljyjärjestelmien hiukkaslaskentakoulutus, Tampereen teknillinen yliopisto, Tampere, Finland. Rinkinen, J., Multanen, P., Elo, L. & Niiranen, E. (eds.). p. 134-160

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  81. Published

    Hydraulikomponenttien käyttöikä

    Rinkinen, J. & Immonen, A., 2010, In : Fluid Finland. 1/2010, p. 8-11

    Research output: Contribution to journalArticleScientific

  82. Published

    Improved in-line maintenance of oil in circulating lubrication system

    Rinkinen, J. A., 2009, The Sixth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, Dublin, Ireland, 23-25 June 2009. p. 714-726

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  83. Published

    Puhtauden valvonta kehittyy

    Rinkinen, J., 2009, In : Promaint. 5/2009, p. 48-53

    Research output: Contribution to journalArticleProfessional

  84. Published

    Experiences and equipment in condition monitoring and in-line maintenance of oil

    Rinkinen, J. & Elo, L., 2008, Proceedings of the 8th International CJC Sales Meeting, May 13th-15th, 2008, Denmark. p. 56 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  85. Published

    Vesihydrauliikan kunnonvalvonta

    Riipinen, H., 2008, In : Fluid Finland. p. 12-14

    Research output: Contribution to journalArticleProfessional

  86. Published

    Life in the water hydraulics system

    Riipinen, H., 2008, Tampere: Tampere University of Technology. (Tampereen teknillinen yliopisto. Julkaisu; vol. 716)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  87. Published

    Autonomous fleet management utilizing OpenSplice DDS

    Rasi, T., 2011, Proceedings of the 5th GIM Scientific Workshop at Aalto University School of Electrical Engineering 29.-30.11.2011. Espoo: Aalto University, p. 88-102 15 p. (GIM Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  88. Published

    Simulation and experimental results of PWM control for Digiltalhydraulics

    Plöckinger, A., Huova, M. & Scheidl, R., 2012, DFP 12, Proceedings of the fifth workshop on digital fluid power, October 24-25, 2012, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). Tampere: Tampere University of Technology. Department of Intelligent Hydraulics and Automation, p. 133-152 (Workshop on digital fluid power).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  89. Published

    Quality analysis of simulink models

    Plaska, M., Huova, M., Walden, M., Sere, K. & Linjama, M., 2009, Proceedings of the Conquest 2009. 12th International Conference on Quality Engineering in Software Technology, 16-18 September 2009, Nuremberg, Germany. Schieferdecker, I. & Goericke, S. (eds.). p. 223-240

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  90. Published

    Digital hydraulics in workboat propulsion control

    Perukangas, M. & Mäkinen, E., 2010, Proceedings of the Third Workshop on Digital Fluid Power, October 13-14 2010, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). p. 153-166

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  91. Published

    Genetic optimization of a fast solenoid actuator for a digital hydraulic valve

    Pellikka, M., Ahola, V., Söderlund, L. & Uusitalo, J-P., 2011, In : International Journal of Fluid Power. 12, 2, p. 49-56

    Research output: Contribution to journalArticleScientificpeer-review

  92. Published

    IHA:n KompuNW-testipenkillä tehtyjä mittauksia

    Pekkonen, J., Elo, L., Kuosku, M. & Rinkinen, J., 2012, KompuNW -verkostoseminaari TTY:ssa 9.10.2012. Tampere: Tampere University of Technology, IHA - Department of Intelligent Hydraulics and Automation, p. 1-16 16 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  93. Published

    Laminated manifold for digital hydraulics - principles, challenges and benefits

    Paloniitty, M., Karvonen, M., Linjama, M. & Tiainen, T., 2012, DFP 12, Proceedings of the fifth workshop on digital fluid power, October 24-25, 2012, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). Tampere: Tampere University of Technology. Department of Intellidgent Hydraulics and Automation, p. 27-42 (Workshop on digital fluid power).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  94. Published

    Unified Framework for Rapid Prototyping of Linux based Real-Time Controllers with Matlab and Simulink

    Oftadeh, R., Aref, M. M., Ghabcheloo, R. & Mattila, J., 2012, IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM 2012, Ambassador Hotel, July 11-14, Kaohsiung, Taiwan. Piscataway, NJ: Institute of Electrical and Electronics Engineers IEEE, p. 274 - 279 (IEEE/ASME International Conference on Advanced Intelligent Mechatronics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  95. Published

    What do information reuse and automated processing require in engineering design? Semantic process

    Nykänen, O., Salonen, J., Markkula, M., Ranta, P., Rokala, M., Helminen, M., Alarotu, V., Nurmi, J., Palonen, T., Koskinen, K. T. & Pohjolainen, S., 2011, In : Journal of Industrial Engineering and Management. 4, 4, 329.

    Research output: Contribution to journalArticleScientificpeer-review

  96. Published

    Semantic Top-Down Modeling of Mechatronics Systems for Sustainable Product Data and Lifecycle Management

    Nykänen, O., Koskinen, K. T., Ranta, P., Salonen, J., Rokala, M., Helminen, M., Nurmi, J., Sairiala, H., Alarotu, V., Aaltonen, J. & Pohjolainen, S., 2012, The 13th Mechatronics Forum International Conference. Proceedings Vol. 3/3. September 17-19 2012, Linz, Austria.. Scheidl, R. & Jacoby, B. (eds.). Linz, Austria: Austrian Center of Competence in Mechatronics (ACCM), p. 792-799 (Mechatronics Forum International Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  97. Published

    Detection and isolation of leakage and valve faults in hydraulic systems in varying loading conditions

    Nurmi, J., 2011, Proceedings of the 5th GIM Scientific Workshop at Aalto University School of Electrical Engineering 29.-30.11.2011. Espoo: Aalto University, p. 80-88 (GIM Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  98. Published

    Detection and isolation of leakage and valve faults in hydraulic systems in varying loading conditions, Part 2: Fault detection and isolation scheme

    Nurmi, J. & Mattila, J., 2012, In : International Journal of Fluid Power. 13, 1, p. 17-27

    Research output: Contribution to journalArticleScientificpeer-review

  99. Published

    Detection and isolation of leakage and valve faults in hydraulic systems in varying loading conditions, Part 1: Global sensitivity analysis

    Nurmi, J. & Mattila, J., 2011, In : International Journal of Fluid Power. 12, 3, p. 41-51

    Research output: Contribution to journalArticleScientificpeer-review

  100. Published

    A reduced-order unscented kalman filter independent of loading conditions for leakage fault detection and isolation in hydraulic systems

    Nurmi, J. & Mattila, J., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Sairala, H. & Koskinen, K. T. (eds.). Tampere: Scandinavian International Conference on Fluid Power, p. 57-74 (Scandinavian International Conference on Fluid Power SICFP; vol. 12, no. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Previous 1 2 3 4 Next

ID: 21447