Tampere University of Technology

TUTCRIS Research Portal

Department of Intelligent Hydraulics and Automation

Research unit: Department

  1. Published

    Digital hydraulics in working actions in mobile machines

    Huova, M. & Karvonen, M., 2009, The Second Workshop on Generic Intelligent Machines, May 14-15, 2009, Tampere University of Technology, Tampere, Finland. Huhtala, K. & Uusi-Heikkilä, J. (eds.). p. 9 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  2. Published

    Energy efficient digital hydraulic valve control utilizing pressurized tank line

    Huova, M. & Linjama, M., 2012, Proceedings of the 8th International Fluid Power Conference Dresden, March 26-28, 2012. Dresden: Technische Universutät Dresden, Dresdner Verein zur Förderung der Fluidtechnik, p. 111-122 12 p. (International Fluid Power Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  3. Published

    Control of three-chamber cylinder with digital valve system

    Huova, M. & Laamanen, A., 2009, Proceedings of The Second Workshop on Digital Fluid Power 12-13 November 2009, Linz, Austria. Scheidl, R. & Winkler, B. (eds.). p. 94-105 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  4. Published

    Autonomous pallet picking of GIM machine

    Hyvönen, M., Ghabcheloo, R., Mantere, P., Kolu, A. & Huhtala, K., 2011, Proceedings of the 5th GIM Scientific Workshop at Aalto University School of Electrical Engineering 29.-30.11.2011. Espoo: Aalto University, p. 30-36 (GIM Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  5. Published

    Towards automatic testing of control systems for intelligent mobile machines

    Hyvönen, M., Multanen, P., Mantere, P., Kolu, A., Vallas, A., Alanen, J. & Rantala, S., 2009, The 11th Scandinavian International Conference on Fluid Power SICFP'09, Linköping, Sweden, June 2-4 2009. p. 12 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  6. Published

    Simulation as a tool for development of control and interface system module

    Hyvönen, M., Multanen, P. & Huhtala, K., 2008, 1st GIM Scientific Workshop at Helsinki University of Technology, 14.-15.8.2008. p. 87-91

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  7. Published

    Improvement of total efficiency of hydrostatic transmission by using optimized control

    Ijas, M. & Mäkinen, E., 2008, Proceedings of the 7th JFPS International Symposium on Fluid Power, Toyama, September 15-18, 2008. Tanaka, Y. (ed.). p. 271-276

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  8. Published

    Digital hydraulic pressure control

    Ijas, M., Mäkinen, E. & Linjama, M., 2009, The 11th Scandinavian International Conference on Fluid Power SICFP'09, Linköping, Sweden, June 2-4 2009. p. 12 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  9. Published

    Development of an intelligent control user interface for autonomous machines

    Järä, J. & Hyvönen, M., 2009, The Second Workshop on Generic Intelligent Machines, May 14-15, 2009, Tampere University of Technology, Tampere, Finland. Huhtala, K. & Uusi-Heikkilä, J. (eds.). p. 8 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  10. Published

    Host activities in connection with the DTP2 test facility

    Järvenpää, J., Timperi, A., Tuominen, R. & Mattila, J., 2008, Espoo: VTT. 5 p. (VTT Publications; vol. 678)

    Research output: Book/ReportCommissioned reportProfessional

  11. Published

    A parameter study of a digital pump

    Jaurola, M. & Huhtala, K., 2010, Fluid Power and Motion Control (FPMC 2010), 15-17 September 2010, University of Bath, UK. Johnston, D. N. & Plummer, A. (eds.). p. 203-215

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  12. Published

    Valve parameter study in case of digital pump

    Jaurola, M., 2010, Proceedings of the 3rd GIM Scientific Workshop, February 17-18, 2010, Aalto University School of Science and Technology. Halme, A. & Pirttioja, T. (eds.). Espoo, p. 1-13 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  13. Published

    Detection of errors and failures using intelligent interface during a teleoperation process on skid steered mobile machine

    Javier, M., Karhu, O. I., Uusisalo, J. R. A. & Huhtala, K. J., 2008, 3rd IEEE Conference on Industrial Electronics and Applications ICIEA 2008, 3-5 June 2008, Singapore. p. 326-330

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  14. Published

    Autonomous excavation using hydraulic mobile machine retrofitted with electronic control system

    Karhu, O., Uusisalo, J., Honkakorpi, J. & Huhtala, K., 2008, Proceedings of the 7th JFPS International Symposium on Fluid Power, Toyama 2008, September 15-18, 2008. Tanaka, Y. (ed.). p. 359-362

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  15. Published

    On-board data transfer of automated heavy machinery

    Karhu, O. & Huhtala, K., 2011, Proceedings of the 8th JFPS International Symposium on Fluid Power, Okinawa 2011, October 25-28, 2011, Okinawa, Japan. Okinawa: JFPS international Symposium on Fluid Power, p. 144-150 (International Symposium on Fluid Power JFPS).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  16. Published

    Autonomous excavation

    Karhu, O., 2009, The Second Workshop on Generic Intelligent Machines, May 14-15, 2009, Tampere University of Technology, Tampere, Finland. Huhtala, K. & Uusi-Heikkilä, J. (eds.). p. 10 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  17. Published

    On-board system integration of a mobile machine with automated functions operating in a multi-machine environment

    Karhu, O., 2011, GIM - Generic Intelligent Machines, The 4th GIM Scientific Workshop, January 18-19, 2011, Tampere University of Technology, Tampere, Finland. Tampere: Tampere University of Technology, (GIM Scientific Workshop; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  18. Published

    High-Pressure Properties of Hydraulic Fluid Dynamics and Second Order Polynomial Prediction Method

    Karjalainen, J-P., 2011, Tampere: Tampere University of Technology. 83 p. (Tampere University of Technology. Publication; vol. 983)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  19. Published

    Second order polynomial model for fluid dynamics in high pressure

    Karjalainen, J-P., Karjalainen, R., Huhtala, K. & Vilenius, M., 2009, Proceedings of the ASME 2009 Dynamic Systems and Control Conference (DSCC2009) October 12-14, 2009, Hollywood, California, USA. p. 7 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  20. Published

    Turvallisuus hydraulijärjestelmän öljynäytteenotossa ja mittauksessa

    Karjalainen, R., 2009, PAMAS 2009 käyttäjäpäivät 10.-11.2.2009, Öljyjärjestelmien hiukkaslaskentakoulutus, Tampereen teknillinen yliopisto, Tampere, Finland. Rinkinen, J., Multanen, P., Elo, L. & Niiranen, E. (eds.). p. 116-120

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

Previous 12 3 4 5 6 7 8 9 ...17 Next

ID: 21447