Tampere University of Technology

TUTCRIS Research Portal

Department of Intelligent Hydraulics and Automation

Research unit: Department

  1. Published

    Matkaraportti: Digitaalihydrauliikan seminaari marraskuisessa Linzissä

    Linjama, M., 2010, In : Fluid Finland. 1/2010, p. 12-14

    Research output: Contribution to journalArticleScientific

  2. Published

    Measured characteristics of an in-line pump with independently controlled pistons

    Tammisto, J., Huova, M., Heikkilä, M., Linjama, M. & Huhtala, K., 2010, 7th International Fluid Power Conference (7th IFK), 22-24 March 2010, Aachen, Germany. p. 1-12 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  3. Published

    Measuring and Modelling Hydraulic Fluid Dynamics at High Pressure - Accurate and Simple Approach

    Karjalainen, J-P., Karjalainen, R. & Huhtala, K., 2012, In : International Journal of Fluid Power. 13, 2, p. 51-59

    Research output: Contribution to journalArticleScientificpeer-review

  4. Published

    Mems Sensor Module for Hydraulic Boom State Feeedback Control

    Honkakorpi, J., Vihonen, J. & Mattila, J., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Sairala, H. & Koskinen, K. T. (eds.). Tampere: Scandinavian International Conference on Fluid Power, p. 393-404 (Scandinavian International Conference on Fluid Power SICFP).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  5. Published

    Method and tools for machine maintainability design in VE

    Mäkiranta, A. V., Multanen, P., Leino, S-P. S. & Lind, S. M., 2009, The Sixth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, Dublin, Ireland, 23-25 June 2009. p. 877-888

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  6. Published

    Method for automatic testing of control systems

    Kolu, A., Mantere, P., Vallas, A., Hyvönen, M. & Multanen, P., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Sairala, H. & Koskinen, K. T. (eds.). Tampere: Scandinavian International Conference on Fluid Power, p. 111-127 17 p. (Scandinavian International Conference on Fluid Power SICFP; vol. 12, no. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  7. Published

    Metviro

    Kortemaa, A., Mäkelä, T., Punki, J., Ranta, P., Palonen, T., Leino, T. & Koskinen, K. T., 2009

    Research output: Artistic and non-textual formSoftwareScientific

  8. Published

    Minimization of state transition uncertainty in the digital valve system

    Laamanen, A., 2009, The Second Workshop on Generic Intelligent Machines, May 14-15, 2009, Tampere University of Technology, Tampere, Finland. Huhtala, K. & Uusi-Heikkilä, J. (eds.). p. 9 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  9. Published

    Minimization of state transition uncertainty in the digital valve system

    Laamanen, A., 2009, Tampere: Tampere University of Technology. 111 p. (Tampereen teknillinen yliopisto. Julkaisu; vol. 809)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  10. Published

    Minimizing the Maximum Curvature of Quadratic Bezier Curves with a Tetragonal Concave Polygonal Boundary Constraint

    Choi, J., Curry, R. E. & Elkaim, G. H., 2011, In : Computer-Aided Design. 44, 4, p. 1-22 22 p.

    Research output: Contribution to journalArticleScientificpeer-review

  11. Published

    Mittaustuloksia kaupallisilla puhtaustestikaapeilla

    Kuosku, M., Pekkonen, J. & Rinkinen, J., 2012, KompuNW -verkostoseminaari TTY:ssa 9.10.2012. Tampere: Tampere University of Technology, IHA - Department of Intelligent Hydraulics and Automation, p. 1-15 15 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  12. Published

    Model-based design of power-split drivelines

    Erkkilä, M., 2009, Tampere: Tampere University of Technology. 102 p. (Tampereen teknillinen yliopisto. Julkaisu; vol. 835)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  13. Published

    Model-based design of power-split drivelines

    Erkkilä, M., Huhtala, K., Vilenius, M. & Virvalo, T., 2009, Agricultural Engineering Conference 2009, 6.-7.11.2009, Hannover, Germany. VDI-Berichte. p. 327-332

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  14. Published

    Model-based pressure control with digital valve system

    Linjama, M. & Lahtinen, J., 2011, The Fourth Workshop on Digital Fluid Power, 21st-22nd November, 2011, Linz, Austria. Linz: DFP-Workshops, p. 26-38 (Workshop on Digital Fluid Power; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  15. Published

    Modeling and motion control of an articulated-frame-steering hydraulic mobile machine

    Ghabcheloo, R. & Hyvönen, M., 2009, 17th Mediterranean Conference on Control and Automation MED '09, June 24-26, 2009, Thessaloniki, Greece. p. 92-97

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  16. Published

    Modelling and robust control of a hydraulic servo system

    Zhai, L., Mattila, J. & Virvalo, T., 2010, Proceedings of the Post-Graduate Workshop on Intelligent Machines and Transport Systems, May 3-7, 2010, CERN, Switzerland. Karvinen, T. & Keskinen, E. (eds.). p. 156-167

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  17. Published

    Modelling and Robust Control of Hydraulic Manipulators

    Zhai, L., 2012, Tampere: Tampere University of Technology. 98 p. (Tampere University of Technology. Publication; no. 1069)

    Research output: Book/ReportDoctoral thesisMonograph

  18. Published

    Modelling and simulation of the aircraft rudder hydraulic servo actuator with dynamic interconnections to flight dynamics and flight control system models

    Hietala, J-P., Aaltonen, J., Koskinen, K. T. & Vilenius, M., 2009, SICFP'09 Proceedings, the11th Scandinavian International Conference on Fluid Power, Linköping, Sweden, June 2-4 2009. p. 12 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  19. Published

    Modelling of flow characteristics of on/off valves

    Linjama, M., Huova, M. & Karvonen, M., 2012, DFP 12, Proceedings of the fifth workshop on digital fluid power, October 24-25, 2012, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). Tampere: Tampere University of Technology, Department of Intelligent Hydraulics and Automation, p. 209-222 (Workshop on digital fluid power).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  20. Published

    Modelling of hydraulics and mechanics of a mobile machine

    Vuohijoki, A., Hyvönen, M., Huhtala, K. & Vilenius, M., 2008, Fluid Power and Motion Control FPMC 2008, 10-12 September 2008, Bath, UK. Johnston, D. N. & Plummer, A. R. (eds.). p. 105-118 14 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  21. Published

    Modelling, simulation and control of a water hydraulic manipulator

    Zhai, L., Virvalo, T. & Mattila, J., 2009, Proceedings of the Seventh International Conference on Fluid Power Transmission and Control, ICFP 2009, April 7-10, 2009, Hangzhou, China. Lu, Y., Wang, Q., Li, W. & Ju, B. (eds.). p. 485-489

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  22. Published

    Modelling the efficiencies of hydraulic pumps with neural networks

    Backas, J. & Huhtala, K., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Sairala, H. & Koskinen, K. T. (eds.). Tampere: Scandinavian International Conference on Fluid Power, p. 11-24 (Scandinavian International Conference on Fluid Power SICFP; vol. 12, no. 3).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  23. Published

    Moisture and Bio-deterioration Risk of Building Materials and Structures

    Viitanen, H., Vinha, J., Salminen, K., Ojanen, T., Peuhkuri, R., Paajanen, L. & Lähdesmäki, K., 2010, In : Journal of Building Physics. 33, 3, p. 201-224 24 p.

    Research output: Contribution to journalArticleScientificpeer-review

  24. Published

    Multiple marine vehicle deconflicted path planning with currents and communication constraints

    Häusler, A., Ghabcheloo, R., Pascoal, M. A. & Aguiar, A. P., 2010, The 7th IFAC Symposium on Intelligent Autonomous Vehicles IAV'10, Lecce, Italy, September 2010. p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  25. Published

    Negative load sensing

    Erkkilä, M., Jalkanen, T., Lehto, E. & Virvalo, T., 2010, 7th International Fluid Power Conference (7th IFK), 22-24 March2010, Aachen, Germany. p. 1-12 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  26. Published

    New alternative for digital pump-motor-transformer

    Linjama, M. & Tammisto, J., 2009, Proceedings of The Second Workshop on Digital Fluid Power, 12-13 November 2009, Linz, Austria. Scheidl, R. & Winkler, B. (eds.). p. 49-61

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  27. Published

    New digital electrohydraulic valve package

    Uusitalo, J-P., Ahola, V., Söderlund, L. & Kettunen, L., 2010, Proceedings of the Third Workshop on Digital Fluid Power, October 13-14, 2010, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). p. 39-59

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  28. Published

    New energy efficient valve concept

    Erkkilä, M., Lehto, E. & Virvalo, T., 2009, The 11th Scandinavian International Conference on Fluid Power SICFP'09, Linköping, Sweden, June 2-4 2009. p. 11 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  29. Published

    New Power Management System for Fluid Power Applications

    Heikkilä, M., 2011, Proceedings of the 5th GIM Scientific Workshop at Aalto University School of Electrical Engineering 29.-30.11.2011. Espoo: Aalto University, p. 131-138 (GIM Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  30. Published

    New steering mechanism and hydrostatic transmission system for articulated-frame-steering mobile machines

    Ghabcheloo, R., Hyvönen, M., Vuohijoki, A., Huhtala, K. & Vilenius, M., 2009, The 11th Scandinavian International Conference on Fluid Power SICFP'09, Linköping, Sweden, June 2-4 2009. p. 13 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  31. Published

    Novel bistable hammer valve for digital hydraulics

    Uusitalo, J-P., Söderlund, L., Kettunen, L., Ahola, V. & Linjama, M., 2009, Proceedings of The Second Workshop on Digital Fluid Power, 12-13 November 2009, Linz, Austria. Scheidl, R. & Winkler, B. (eds.). p. 33-48

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  32. Published

    Novel bistable hammer valve for digital hydraulics

    Uusitalo, J-P., Ahola, V., Söderlund, L., Linjama, M., Juhola, M. & Kettunen, L., 2010, In : International Journal of Fluid Power. 11, 3, p. 35-44

    Research output: Contribution to journalArticleScientificpeer-review

  33. Published

    Nya standarder i Finland för hur industrihydrauliksystem skall upphandlas

    Rinkinen, J. & Viertävä, J., 2008, In : Fluid Scandinavica, Specialtidningen för hydraulik/pneumatik. 1, p. 35-36

    Research output: Contribution to journalArticleProfessional

  34. Published

    Öljynäytteiden hiukkaslaskennan tärkeimmät standardit

    Niiranen, E., Elo, L. & Multanen, P., 2009, PAMAS 2009 käyttäjäpäivät 10.-11.2.2009, Öljyjärjestelmien hiukkaslaskentakoulutus, Tampereen teknillinen yliopisto, Tampere, Finland. Rinkinen, J., Multanen, P., Elo, L. & Niiranen, E. (eds.). p. 47-61

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  35. Published

    On-board data transfer of automated heavy machinery

    Karhu, O. & Huhtala, K., 2011, Proceedings of the 8th JFPS International Symposium on Fluid Power, Okinawa 2011, October 25-28, 2011, Okinawa, Japan. Okinawa: JFPS international Symposium on Fluid Power, p. 144-150 (International Symposium on Fluid Power JFPS).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  36. Published

    On-board system integration of a mobile machine with automated functions operating in a multi-machine environment

    Karhu, O., 2011, GIM - Generic Intelligent Machines, The 4th GIM Scientific Workshop, January 18-19, 2011, Tampere University of Technology, Tampere, Finland. Tampere: Tampere University of Technology, (GIM Scientific Workshop; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  37. Published

    On design and development of additional End-Effectors for the Cassette Multifunctional Mover

    Valkama, P., Mattila, J., Amjad, F., Väyrynen, J., Vilenius, M., Siuko, M., Semeraro, L. & Esque, S., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 1946-1949

    Research output: Contribution to journalArticleScientificpeer-review

  38. Published

    Online minimization of power losses in distributed digital hydraulic valve system

    Linjama, M., Huova, M. & Vilenius, M., 2008, Proceedings of the 6th International Fluid Power Conference Dresden, Fluid Power in Motion, 6iFK, April 1.-2.2008, Dresden. p. 157-171

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  39. Published

    On the flow and cavitation characteristics of water hydraulic seat valve structures

    Leino, T., 2008, Tampere: Tampere University of Technology. (Tampereen teknillinen yliopisto. Julkaisu; vol. 722)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  40. Published

    Optimization and energy consumption of electro-hydraulic valve actuation system through valve event timing range

    Herranen, M., Huhtala, K. & Vilenius, M., 2010, Fluid Power and Motion Control (FPMC 2010), 15-17 September 2010, University of Bath, UK. Johnston, D. N. & Plummer, A. (eds.). p. 433-445

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  41. Published

    Optimized hardware design for the divertor remote handling control system

    Saarinen, H., Tiitinen, J., Aha, L., Muhammad, A., Mattila, J., Siuko, M., Vilenius, M., Järvenpää, J., Irving, M., Damiani, C. & Semeraro, L., 2009, In : Fusion Engineering and Design. 84, 2-6, p. 1666-1670

    Research output: Contribution to journalArticleScientificpeer-review

  42. Published

    Pallet detection and tracking: position based visual servoing

    Ghabcheloo, R., 2012, Proceedings of the 6th GIM Scientific Workshop, November 7-8, 2012, Tampere, Finland. Huhtala, K. & Uusi-Heikkilä, J. (eds.). Tampere: Tampere University of Technology. Department of Intelligent Hydraulics and Automation, p. 117-123 (GIM Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  43. Published

    Path planning for multiple marine vehicles

    Häusler, A. J., Ghabcheloo, R., Kaminer, I., Pascoal, A. M. & Aguiar, A. P., 2009, Oceans'09 IEEE Bremen, Balancing technology with future needs, 11-14 May 2009, Bremen, Germany. p. 9 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  44. Published

    Planning of Dependable Remote Handling Control System Architecture for ITER

    Alho, P., Hahto, A., Mattila, J. & Aha, L., 2011, European Nuclear Young Generation Forum, ENYGF 2011, 17.5.-22.5.2011, Praha. Prague: ENYGF, p. 1-7 7 p. (European Nuclear Young Generation Forum ENYGF).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  45. Published

    Power management in a mobile work machine: reduced diesel rpm for better energy efficiency

    Ahopelto, M., Backas, J. & Huhtala, K., 2012, Proceedings of the 7th FPNI PhD Symposium on Fluid Power, University of Modena and Reggio Emilia, June 27-30, 2012, Reggio Emilia, Italy. Milani, M., Montorsi, L. & Paltrinieri, F. (eds.). p. 133-148 (Fluid Power Net International PhD Symposium; vol. 7).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  46. Published

    Power Management of Mobile Machines with Multiple Consumers

    Ahopelto, M., 2012, GIM - Generic Intelligent Machines, Proceedings of the 6th GIM Scientific Workshop, November 7-8, 2012, Tampere, Finland. Huhtala, K. & Uusi-Heikkilä, J. (eds.). Tampere: Tampere University of Technology. Department of Intelligent Hydraulics and Automation, p. 31-37 (GIM Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  47. Published

    Predicting the runtime reliability of ITER Remote Handling maintenance equipment

    Väyrynen, J., Mattila, J., Vilenius, M., Ali, M., Valkama, P., Siuko, M. & Semeraro, L., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 2012-2015

    Research output: Contribution to journalArticleScientificpeer-review

  48. Published

    Proceedings of the fifth workshop on digital fluid power, October 24-25, 2012, Tampere, Finland

    Laamanen, A. (ed.) & Linjama, M. (ed.), 2012, Tampere: Tampere University of Technology. Department of Intellidgent Hydraulics and Automation.

    Research output: Book/ReportAnthologyScientificpeer-review

  49. Published

    Proceedings of the First Workshop on Digital Fluid Power 3rd October, 2008 Tampere, Finland

    Linjama, M. (ed.) & Laamanen, A. (ed.), 2008, Tampere University of Technology.

    Research output: Book/ReportAnthologyScientificpeer-review

  50. Published

    Proceedings of the Third Workshop on Digital Fluid Power, October 13-14 2010, Tampere, Finland

    Laamanen, A. (ed.) & Linjama, M. (ed.), 2010, Tampere: Tampere University of Technology.

    Research output: Book/ReportAnthologyScientificpeer-review

  51. Published

    Proportional valve control of water-hydraulic systems

    Sairiala, H. & Koskinen, K. T., 2012, Topic water hydraulics, Dutch Fluid Power Conference, Ede, The Netherlands 13th September 2012. Vereniging Platform Hydrauliek, p. 49-63 (Dutch Fluid Power Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  52. Published

    Protocol based on packet transmission to teleoperate a skid steered mobile machine

    Moya, J. & Huhtala, K., 2009, Proceedings of the 2009 IEEE International Conference on Industrial Technology, ICIT 2009, 10-13 February 2009, Monash University, Gippsland, Victoria, Australia. p. 1109-1113

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  53. Published

    Puhtauden mittauksen erityispiirteet sotilaslentokoneissa

    Aaltonen, J., 2009, PAMAS 2009 käyttäjäpäivät 10.-11.2.2009, Öljyjärjestelmien hiukkaslaskentakoulutus, Tampereen teknillinen yliopisto, Tampere, Finland. Rinkinen, J., Multanen, P., Elo, L. & Niiranen, E. (eds.). p. 121-127

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  54. Published

    Puhtauden valvonta kehittyy

    Rinkinen, J., 2009, In : Promaint. 5/2009, p. 48-53

    Research output: Contribution to journalArticleProfessional

  55. Published

    Putkistopasseja TTY/IHA:n henkilökunnalle

    Rinkinen, J., 2009, In : Fluid Finland. 2/2009, p. 24-27

    Research output: Contribution to journalArticleProfessional

  56. Published

    Puuvirta-virtuaalinen ja simuloitu oppimisympäristö

    Kortemaa, A., Moisio, M., Punki, J., Palonen, T., Ranta, P., Leino, T., Alarotu, V., Koskinen, K. T. & Tohu, J., 2011

    Research output: Artistic and non-textual formSoftwareScientific

  57. Published

    Quality analysis of simulink models

    Plaska, M., Huova, M., Walden, M., Sere, K. & Linjama, M., 2009, Proceedings of the Conquest 2009. 12th International Conference on Quality Engineering in Software Technology, 16-18 September 2009, Nuremberg, Germany. Schieferdecker, I. & Goericke, S. (eds.). p. 223-240

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  58. Published

    Real-time markerless Augmented Reality for Remote Handling system in bad viewing conditions

    Ziaei, Z., Hahto, A., Mattila, J., Siuko, M. & Semeraro, L., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 2033-2038

    Research output: Contribution to journalArticleScientificpeer-review

  59. Published

    Recent advancements in miniature valve development

    Karvonen, M., Ketonen, M., Linjama, M. & Puumala, V., 2011, The Fourth Workshop on Digital Fluid Power, 21st-22nd November, 2011, Linz, Austria. Linz: DFP-Workshops, p. 90-103 14 p. (Workshop on Digital Fluid Power; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  60. Published

    Recent advances in standardisation and education of fluid power in Finland

    Rinkinen, J., Lahtinen, J. & Virta, S., 2011, In : Maintworld, Maintenance & Asset Management. 3, 2, p. 14-18

    Research output: Contribution to journalArticleProfessional

  61. Published

    Recent results in energy efficient digital hydraulic valve control

    Huova, M., 2012, Proceedings of the 6th GIM Scientific Workshop, November 7-8, 2012, Tampere, Finland. Huhtala, K. & Uusi-Heikkilä, J. (eds.). Tampere: Tampere University of Technology. Department of Intelligent Hydraulics and Automation, p. 89-94 (GIM Scientific Workshop; vol. 6).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  62. Published

    Recognition of Operating States of Mobile Machine

    Krogerus, T., 2011, Proceedings of the 5th GIM Scientific Workshop at Aalto University School of Electrical Engineering 29.-30.11.2011. Espoo: Aalto University, p. 70-80 (GIM Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  63. Published

    Reitinvalintaa rastilta seuraavalle

    Huhtala, K., 2010, In : Fluid Finland. 3-4, p. 7-7

    Research output: Contribution to journalArticleScientific

  64. Published

    Remote support for maintenance tasks by the use of Augmented Reality: the ManuVAR project

    Azpiazu, J., Siltanen, S., Multanen, P., Mäkiranta, A., Barrena, N., Diez, A., Agirre, J. & Smith, T., 2011, Proceedings of the 9th Congress on Virtual Reality Applications, CARVI 2011. San Sebastian: Tecnalia, p. 1-6 6 p. (Congress on Virtual Reality Applications CARVI; vol. 9).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  65. Published

    Research of optimizing the prime mover and hydraulics of mobile machines

    Backas, J., 2011, GIM - Generic Intelligent Machines, The 4th GIM Scientific Workshop, January 18-19, 2011, Tampere University of Technology, Tampere, Finland. Tampere: Tampere University of Technology, p. 1-5 5 p. (GIM Scientific Workshop; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  66. Published

    Research platforms for future activities

    Huhtala, K., 2010, Proceedings of the 3rd GIM Scientific Workshop, February 17-18, 2010, Aalto University School of Science and Technology. Halme, A. & Pirttioja, T. (eds.). p. 1-16 16 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  67. Published

    Results of CMM standalone tests at DTP2

    Saarinen, H., Kivelä, T., Zhai, L., Hämäläinen, V., Karjalainen, J-P., Aha, L., Heikkilä, L., Mäkinen, H., Järvenpää, J., Kiviranta, S., Krassi, B., Viinikainen, M., Siuko, M., Mattila, J., Esque, S. & Semeraro, L., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 1907-1910

    Research output: Contribution to journalArticleScientificpeer-review

  68. Published

    Robust control of Cassette Multi-functional Mover for ITER remote handling tasks

    Zhai, L., Mattila, J., Saarinen, H. & Virvalo, T., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 2008-2011

    Research output: Contribution to journalArticleScientificpeer-review

  69. Published

    Secondary controlled multi-chamber hydraulic cylinder

    Linjama, M., Vihtanen, H-P., Sipola, A. & Vilenius, M., 2009, The 11th Scandinavian International Conference on Fluid Power SICFP'09, Linköping, Sweden, June 2-4 2009. p. 15 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  70. Published

    Second order polynomial model for fluid dynamics in high pressure

    Karjalainen, J-P., Karjalainen, R., Huhtala, K. & Vilenius, M., 2009, Proceedings of the ASME 2009 Dynamic Systems and Control Conference (DSCC2009) October 12-14, 2009, Hollywood, California, USA. p. 7 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  71. Published

    Self contained hydraulic module for cylinder driven applications

    Westerlund, S., Mäkinen, E. & Sinivaara, M., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Sairala, H. & Koskinen, K. T. (eds.). Tampere: Scandinavian International Conference on Fluid Power, p. 291-300 (Scandinavian International Conference on Fluid Power SICFP; vol. 12, no. 3).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  72. Published

    Semantic Top-Down Modeling of Mechatronics Systems for Sustainable Product Data and Lifecycle Management

    Nykänen, O., Koskinen, K. T., Ranta, P., Salonen, J., Rokala, M., Helminen, M., Nurmi, J., Sairiala, H., Alarotu, V., Aaltonen, J. & Pohjolainen, S., 2012, The 13th Mechatronics Forum International Conference. Proceedings Vol. 3/3. September 17-19 2012, Linz, Austria.. Scheidl, R. & Jacoby, B. (eds.). Linz, Austria: Austrian Center of Competence in Mechatronics (ACCM), p. 792-799 (Mechatronics Forum International Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  73. Published

    Sensitivity analysis of data analysis process in hydraulic forklift

    Krogerus, T., Rokala, M. & Koskinen, K. T., 2011, Proceedings of the 8th JFPS International Symposium on Fluid Power, Okinawa 2011, October 25-28, 2011, Okinawa, Japan. Okinawa: JFPS international Symposium on Fluid Power, p. 571-578 (International Symposium on Fluid Power JFPS).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  74. Published

    Sensor module for hydraulic boom state feedback control

    Honkakorpi, J., Vihonen, J. & Mattila, J., 2012, In : International Journal of Fluid Power. 13, 3, p. 15-23

    Research output: Contribution to journalArticleScientificpeer-review

  75. Published

    Service-oriented ad-hoc method for unforeseen scenarios

    Hahto, A., Rasi, T., Kivelä, T., Honkakorpi, J. & Mattila, J., 2011, Fifth International Workshop on Robotics for risky interventions and Environmental Surveillance-Maintenance 5th IARP RISE’2011, 20-22 June, C-ELROB 2011, 21-24 June, Brussels – Leuven. Leuven: IARP, p. 1-6 6 p. (International Workshop on Robotics for Risky Interventions and Environmental Surveillance-Maintenance IARP RISE, C-ELROB).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  76. Published

    Simulation and experimental results of PWM control for Digiltalhydraulics

    Plöckinger, A., Huova, M. & Scheidl, R., 2012, DFP 12, Proceedings of the fifth workshop on digital fluid power, October 24-25, 2012, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). Tampere: Tampere University of Technology. Department of Intelligent Hydraulics and Automation, p. 133-152 (Workshop on digital fluid power).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  77. Published

    Simulation as a tool for development of control and interface system module

    Hyvönen, M., Multanen, P. & Huhtala, K., 2008, 1st GIM Scientific Workshop at Helsinki University of Technology, 14.-15.8.2008. p. 87-91

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  78. Published

    Simulation model of hydraulic power transmission of teleoperated mobile machine and Development and Research Work of Advanced Velocity Control via Simulations

    Vilenius, J. & Huhtala, K., 2008, Proceedings of the 6th International Fluid Power Conference Dresden, Fluid Power in Motion, 6iFK, April 1.-2.2008, Dresden. p. 85-100

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  79. Published

    Simulation study - improving efficiency in mobile boom by using digital hydraulic power management system

    Karvonen, M., Heikkilä, M., Huova, M., Linjama, M. & Huhtala, K., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Sairala, H. & Koskinen, K. T. (eds.). Tampere: Scandinavian International Conference on Fluid Power, p. 355-368 (Scandinavian International Conference on Fluid Power SICFP; vol. 12, no. 3).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  80. Published

    Simulations with fault-tolerant controller software of a digital valve

    Huova, M., Ketonen, M., Alexeev, P., Boström, P., Linjama, M., Walden, M. & Sere, K., 2012, Proceedings of the fifth workshop on digital fluid power, October 24-25, 2012, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). Tampere: Tampere University of Technology. Department of Intelligent Hydraulics and Automation, p. 223-242 (Digital fluid power).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  81. Published

    Software development and modelling of the CMM system

    Mattila, J., 2008, Espoo: VTT. 2 p. (VTT Publications; vol. 678)

    Research output: Book/ReportCommissioned reportProfessional

  82. Published

    Status of DTP2 - Test Facility for ITER Divertor Maintenance

    Salminen, K., Siuko, M., Karjalainen, J., Sibois, R. & Mattila, J., 2011, European Nuclear Young Generation Forum, ENYGF 2011, 17.5.-22.5.2011, Praha. Prague: ENYGF, p. 1-6 6 p. (European Nuclear Young Generation Forum ENYGF).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  83. Published

    Study of lubrication conditions in slipper-swashplate contact in water hydraulic axial piston pump test rig

    Rokala, M., Calonius, O., Koskinen, K. T. & Pietola, M., 2008, Proceedings of the 7th JFPS International Symposium on Fluid Power, September 15-18, 2008, Toyama, Japan. Tanaka, Y. (ed.). p. 91-94

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  84. Published

    Supervisory system for DTP2 remote handling operations

    Hahto, A., Aha, L., Nurminen, T., Aaltonen, A., Heikkilä, L., Mattila, J., Siuko, M., Saarinen, H. & Semeraro, L., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 2047-2050

    Research output: Contribution to journalArticleScientificpeer-review

  85. Published

    Synchronization and more intelligent control in teleoperation process on skid steered mobile machine

    Moya, J. & Huhtala, K., 2008, ICARCV 2008, 2008 10th International Conference on Control, Automation, Robotics & Vision, Hanoi, Vietnam, 17-20 December 2008. p. 839-843

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  86. Published

    Synchronization to wirelessly teleoperate a hydraulic skid steered mobile machine from control station

    Moya, J. & Huhtala, K., 2009, Seventh IEEE International Conference on Control and Automation ICCA 2009, December 9-11, 2009, New Zealand. p. 1992-1996

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  87. Published

    Tavoitteena häviötön hydrauliikka

    Linjama, M., 2009, In : Fluid Finland. 3-4, p. 12-17

    Research output: Contribution to journalArticleProfessional

  88. Published

    Temporally and spatially deconflicted path planning for multiple autonomous marine vehicles

    Häusler, A. J., Ghabcheloo, R., Pascoal, A. M., Aguiar, A. P., Kaminer, I. I. & Dobrokhodov, V. N., 2009, 8th IFAC International Conference on Manoeuvring and Control of Marine Craft (MCMC'2009), September 16-18, 2009, Guarujá, Brazil. p. 6 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  89. Published

    Testing of data analysis process in hydraulic forklift

    Krogerus, T. & Koskinen, K. T., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Sairala, H. & Koskinen, K. T. (eds.). Tampere: Scandinavian International Conference on Fluid Power, p. 105-234 130 p. (Scandinavian International Conference on Fluid Power SICFP; vol. 12, no. 3).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  90. Published

    The effect of pc-rate on peek-made slipper behaviour in water hydraulic axial piston unit

    Rokala, M. & Koskinen, K., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Tampere: Scandinavian International Conference on Fluid Power, p. 89-102 14 p. (Scandinavian International Conference on Fluid Power SICFP; vol. 12, no. 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  91. Published

    The energy balance of the electro-hydraulic linear actuation system

    Herranen, M., Huhtala, K. & Vilenius, M., 2009, Proceedings of the International Conference on Power Engineering 2009, ICOPE-09, November 16-20, 2009, Kobe, Japan. p. 6 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  92. Published

    The energy balance of the electro-hydraulic linear actuation system

    Herranen, M., Huhtala, K. & Vilenius, M., 2010, In : Journal of Energy and Power Engineering. 4, 8, p. 57-63

    Research output: Contribution to journalArticleScientific

  93. Published

    The means of optimizing digital valve system

    Laamanen, A., 2008, Proceedings of the First Workshop on Digital Fluid Power 3rd October, 2008, Tampere, Finland. Linjama, M. & Laamanen, A. (eds.). p. 89-99

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  94. Published

    Theoretical backround of a new reservoir design for circulating oil lubrication system

    Rinkinen, J., 2008, Ninth International Tribology Conference of the South Africa Institute of Tribology, 2-4 April 2008, Tribology 2008, SAIT. Vaal, PL. & Fuller, G. (eds.). p. 1-12 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  95. Published

    The use of digital mock-ups on the development of the divertor test platform 2

    Esque, S., Mattila, J., Siuko, M., Vilenius, M., Järvenpää, J., Semeraro, L., Irving, M. & Damiani, C., 2009, In : Fusion Engineering and Design. 84, 2-6, p. 752-756

    Research output: Contribution to journalArticleScientificpeer-review

  96. Published

    Time-coordinated path following for hydaulic manipulators

    Ghabcheloo, R., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Sairala, H. & Koskinen, K. T. (eds.). Tampere: Scandinavian International Conference on Fluid Power, p. 377-392 (Scandinavian International Conference on Fluid Power SICFP; vol. 12, no. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  97. Published

    Time-coordinated path following of multiple UAVs over time-varying networks using L1 adaptation

    Aguiar, A. P., Pascoal, A. M., Kaminer, I., Dobrokhodov, V., Xargay, E., Hovakimyan, N., Cao, C. & Ghabcheloo, R., 2009, AIAA Guidance, Navigation and Control Conference and Exhibit, Honolulu, Hawaii, 18-21 August, 2008. p. 25 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  98. Published

    Towards automatic testing of control systems for intelligent mobile machines

    Hyvönen, M., Multanen, P., Mantere, P., Kolu, A., Vallas, A., Alanen, J. & Rantala, S., 2009, The 11th Scandinavian International Conference on Fluid Power SICFP'09, Linköping, Sweden, June 2-4 2009. p. 12 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  99. Published

    Towards intelligent mobile machines - GIM research

    Huhtala, K., Suomela, J., Vilenius, M. & Halme, A., 2008, Fluid Power and Motion Control FPMC 2008, 10-12 September 2008, Bath, UK. Johnston, D. N. & Plummer, A. R. (eds.). p. 277-290

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  100. Published

    Tribological conditions between swashplate and slipper pad in variable displacement water hydraulic axial piston unit

    Rokala, M., Calonius, O., Koskinen, K. T. & Pietola, M., 2008, Proceedings of the 6th International Fluid Power Conference Dresden, Fluid Power in Motion, 6iFK, April 1.-2.2008, Dresden. p. 301-314

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

ID: 21447