Tampere University of Technology

TUTCRIS Research Portal

Department of Intelligent Hydraulics and Automation

Research unit: Department

  1. Published

    2008-2009 Host Activities Related to DTP2 Test Facility Operation and Upgrade Preparation

    Siuko, M., Järvenpää, J. & Mattila, J., 2010, VTT. 12 p. (VTT Publications; vol. 738)

    Research output: Book/ReportCommissioned reportProfessional

  2. Published

    2008-2009 Host Activities Related to DTP2 Test Facility Operation and Upgrade Preparation

    Siuko, M., Järvenpää, J. & Mattila, J., 2009, VTT. 10 p. (VTT Publications; vol. 709)

    Research output: Book/ReportCommissioned reportProfessional

  3. Published

    2008-2010 Host Activities Related to DTP2 Test Facility Operation and Upgrade Preparation

    Siuko, M., Järvenpää, J. & Mattila, J., 2011, Valtion teknillinen tutkimuslaitos. 11 p. (VTT Publications; vol. 764)

    Research output: Book/ReportCommissioned reportProfessional

  4. Published

    A Case Study on Effects of Remote Control and Control System Distribution in Hydraulic Mobile Machines

    Uusisalo, J., 2011, Tampere: Tampere University of Technology. 111 p. (Tampere University of Technology. Publication; vol. 960)

    Research output: Book/ReportDoctoral thesisMonograph

  5. Published

    Accurate flow control with digital valve system

    Siivonen, L., Linjama, M., Vilenius, M. & Anttonen, P., 2008, Proceedings of the 51st National Conference on Fluid Power March 12-14, 2008, IFPE 2008, Las Vegas, USA. p. 287-294

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  6. Published

    Adaption of virtual tools to support cost-effective maintenance of machines

    Multanen, P., Mäkiranta, A., Nuutinen, P., Leino, S-P., Helin, K. & Lind, S., 2009, 22nd International Congress Condition Monitoring and Diagnostic Engineering Management, Comadem, June 9-11 2009, San Sebastian, Spain. Arnaiz, A., Aranzabe, A. & Rao BKN, R. (eds.). p. 673-680

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  7. Published

    Adaptive dead zone compensation of proportional mobile valve

    Kivelä, T. & Mattila, J., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Sairala, H. & Koskinen, K. T. (eds.). Tampere: Scandinavian International Conference on Fluid Power, p. 411-422 (Scandinavian International Conference on Fluid Power SICFP; vol. 12, no. 3).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  8. Published

    Advantage of redundancy in the controllability of remote handling manipulator

    Muhammad, A., Mattila, J., Vilenius, M., Siuko, M. & Semeraro, L., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 1882-1885

    Research output: Contribution to journalArticleScientificpeer-review

  9. Published

    A general framework for multiple vehicle time-coordinated path following control

    Ghabcheloo, R., Kaminer, I., Aguiar, A. P. & Pascoal, A., 2009, Proceedings of the ACC 2009 - American Control Conference, St. Louis, Missouri, USA, 2009. p. 8 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  10. Published

    A hand-held remote control as a user interface for a hydraulic mobile machine with an excavator

    Uusisalo, J., Karhu, O. & Huhtala, K., 2008, Proceedings of the 51st National Conference on Fluid Power March 12-14, 2008, IFPE 2008, Las Vegas, USA. p. 405-411

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  11. Published

    Aircraft Hydraulic System Fault Finding and Troubleshooting Using On-Line Particle Counters

    Aaltonen, J., Alarotu, V. & Koskinen, K. T., 2011, The Eight International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 20-22 June 2011, Cardiff, Wales. Northamption: British Institute of Non-destructive Testing, p. 1275-1282 (International Conference on Condition Monitoring and Machinery Failure Prevention Technologies; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  12. Published

    Aircraft hydraulic system model integration to fligh simulation model

    Hietala, J-P., Aaltonen, J., Koskinen, K. T. & Vilenius, M., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Tampere: Scandinavian International Conference on Fluid Power, p. 271-280 (Scandinavian International Conference on Fluid Power SICFP; vol. 12, no. 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  13. Published

    A low resolution digital hydraulic control application

    Kukkonen, S. & Mäkinen, E., 2012, Proceedings of the 13th Mechatronics Forum International Conference, September 17-19, 2012, Johannes Kepler University Linz, Austria, Advances in Mechatronics. Scheidl, R. & Jakoby, B. (eds.). Linz: TRAUNER VERLAG, p. 8 p (Mechatronics Forum; vol. 1/3).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  14. Published

    AMAD-painekytkimien laboratoriotestaus

    Hietala, J-P., 2009, Lentotekniikan rakennetutkimuksen neuvottelupäivät VII, 27.-28.8.2009, Tampere. Aaltonen, J. (ed.). p. 1-14 14 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  15. Published

    A miniature needle valve

    Karvonen, M., Juhola, M., Ahola, V., Söderlund, L. & Linjama, M., 2010, Proceedings of the Third Workshop on Digital Fluid Power, October 13-14 2010, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). p. 61-78

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  16. Published

    A mobile platform for remote inspection inside ESRF tunnel

    Chaize, J. M., Robinson, D., Hardy, L., Mattila, J. & Hahto, A., 2009, The International Conference on Accelerator and Large Experimental Physics Control Systems ICALEPCS 2009, October 12-16, 2009, Kobe, Japan. p. 3 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  17. Published

    Analysis and control of a high precision water hydraulic manipulator

    Zhai, L., Virvalo, T., Mattila, J. & Saarinen, H., 2009, The 11th Scandinavian International Conference on Fluid Power SICFP'09, Linköping, Sweden, June 2-4 2009. p. 11 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  18. Published

    Analysis and control of a single leg for hydraulically actuated quadruped robot

    Xia, Y., Aaltonen, J. & Koskinen, K. T., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Tampere: Scandinavian International Conference on Fluid Power, p. 149-160 (Scandinavian International Conference on Fluid Power SICFP; vol. 12, no. 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  19. Published

    Analysis of Adaptive/Learning Control Methods in Cyclic Hydraulic System

    Herranen, M., Enlund, J., Uusisalo, J. & Huhtala, K., 2012, Proceedings of the 8th International Fluid Power Conference, Dresden, March 26-28, 2012. Dresden: Technische Universität Dresden, Institute of Fluid Power, p. 399-410 (International Fluid Power Conference; vol. 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  20. Published

    Analysis of effect of remote control on usability of hydraulic mobile machines

    Uusisalo, J. & Huhtala, K., 2011, Proceedings of the 8th JFPS International Symposium on Fluid Power, Okinawa 2011, October 25-28, 2011, Okinawa, Japan. Okinawa: JFPS international Symposium on Fluid Power, p. 688-695 (International Symposium on Fluid Power JFPS).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  21. Published

    Analysis of Slipper Structures in Water Hydraulic Axial Piston Pumps

    Rokala, M., 2012, Tampere: Tampere University of Technology. (Tampereen teknillinen yliopisto, Julkaisu; no. 1055)

    Research output: Book/ReportDoctoral thesisMonograph

  22. Published

    Analysis of the new architecture proposal for the CMM control system

    Heikkilä, L., Saarinen, H., Aha, L., Viinikainen, M., Mattila, J., Hahto, A., Siuko, M. & Semeraro, L., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 2071-2074

    Research output: Contribution to journalArticleScientificpeer-review

  23. Published

    An Efficient Heuristic Estimate for Non-holonomic Motion Planning

    Choi, J-W., 2012, The 4th Workshop on Planning, Perception and Navigation for Intelligent Vehicles, October 7th, 2012 Vilamoura, Algarve, Portugal. p. 1-6 6 p. (Workshop on Planning, Perception and Navigation for Intelligent Vehicles).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  24. Published

    A new approach for numerical simulation of fluid power circuits using Rosenbrock methods

    Esque, S., 28 Nov 2008, Tampere: Tampere University of Technology. 125 p. (Tampere University of Technology. Publication; vol. 763)

    Research output: Book/ReportDoctoral thesisMonograph

  25. Published

    A new approach for numerical simulation of fluid power circuits using Rosenbrock methods

    Esque, S., 2009, The Second Workshop on Generic Intelligent Machines, May 14-15, 2009, Tampere University of Technology, Tampere, Finland. Huhtala, K. & Uusi-Heikkilä, J. (eds.). p. 9 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  26. Published

    A new kind of piston pump to hydraulic power systems

    Uusi-Heikkilä, J., 2009, The Second Workshop on Generic Intelligent Machines, May 14-15, 2009, Tampere University of Technology, Tampere, Finland. Huhtala, K. & Uusi-Heikkilä, J. (eds.). p. 12 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  27. Published

    A New Method and Format for Describing CANopen System Topology

    Helminen, M., Salonen, J., Saha, H., Nykänen, O., Koskinen, K. T., Ranta, P. & Pohjolainen, S., 2012, Proceedings of the 13th International CAN Conference, iCC 2012 in Hambach Castle, March 5 to March 6, Germany. CAN in Automation e.V., p. 1-8 8 p. (International CAN Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  28. Published

    An implementation of a semantic, web-based virtual machine laboratory prototyping environment

    Salonen, J., Nykänen, O., Ranta, P., Nurmi, J., Helminen, M., Rokala, M., Palonen, T., Alarotu, V., Koskinen, K. & Pohjolainen, S., 2011, In : Lecture Notes in Computer Science. 7032, p. 221-236

    Research output: Contribution to journalArticleScientificpeer-review

  29. Published

    An Optimal Controller for Hydrostatic Drives

    Backas, J., 2012, GIM - Generic Intelligent Machines, Proceedings of the 6th GIM Scientific Workshop, November 7-8, 2012, Tampere, Finland. Huhtala, K. & Uusi-Heikkilä, J. (eds.). Tampere: Tampere University of Technology. Department of Intelligent Hydraulics and Automation, p. 83-88 (Generic Intelligent Machines Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  30. Published

    A novel symmetric and bistable seat valve

    Karvonen, M., Uusitalo, J-P., Ahola, V., Linjama, M. & Vilenius, M., 2009, The 11th Scandinavian International Conference on Fluid Power SICFP'09, Linköping, Sweden, June 2-4 2009. p. 14 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  31. Published

    A parameter study of a digital pump

    Jaurola, M. & Huhtala, K., 2010, Fluid Power and Motion Control (FPMC 2010), 15-17 September 2010, University of Bath, UK. Johnston, D. N. & Plummer, A. (eds.). p. 203-215

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  32. Published

    A Potential Field and Bug Compound Navigation Algorithm for Nonholonomic Wheeled Robots

    Choi, J., 2011, Proceedings of the 5th GIM Scientific Workshop at Aalto University School of Electrical Engineering 29.-30.11.2011. Espoo: Aalto University, p. 62-70 (GIM Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  33. Published

    Application of mems sensor fusion in hydraulic boom control

    Honkakorpi, J. & Mattila, J., 2010, Proceedings of the Post-Graduate Workshop on Intelligent Machines and Transport Systems, May 3-7, 2010, CERN, Switzerland. Karvinen, T. & Keskinen, E. (eds.). p. 1-11 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  34. Published

    Applying self-organizing maps to condition monitoring of hydraulic systems

    Krogerus, T., 2010, Proceedings of the 3rd GIM Scientific Workshop, February 17-18, 2010, Aalto University School of Science and Technology. Halme, A. & Pirttioja, T. (eds.). p. 1-10 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  35. Published

    A reduced-order unscented kalman filter independent of loading conditions for leakage fault detection and isolation in hydraulic systems

    Nurmi, J. & Mattila, J., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Sairala, H. & Koskinen, K. T. (eds.). Tampere: Scandinavian International Conference on Fluid Power, p. 57-74 (Scandinavian International Conference on Fluid Power SICFP; vol. 12, no. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  36. Published

    A review of automated boom control and vibration damping methods for mobile machines

    Honkakorpi, J., 2008, Fourth Arctic-Mediterranean Post Graduate Workshop on Intelligent Machines and Transport Systems, June 23-27, 2008, Saariselkä, Finland. Karvinen, T. & Keskinen, E. (eds.). p. 6 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  37. Published

    Assisting force feedback function for hand-held remote control of excavator

    Uusisalo, J., Karhu, O. & Huhtala, K., 2008, Proceedings of the 7th JFPS International Symposium on Fluid Power, Toyama, September 15-18, 2008. Tanaka, Y. (ed.). p. 653-658

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  38. Published

    A survey on control of hydraulic servo systems

    Zhai, L. & Virvalo, T., 2008, Fourth Arctic-Mediterranean Post Graduate Workshop on Intelligent Machines and Transport Systems, June 23-27, 2008, Saariselkä, Finland. Karvinen, T. & Keskinen, E. (eds.). p. 5 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  39. Published

    Augmented reality for operator assistance

    Kolu, A., 2012, GIM - Generic Intelligent Machines, Proceedings of the 6th GIM Scientific Workshop, November 7-8, 2012, Tampere, Finland. Huhtala, K. & Uusi-Heikkilä, J. (eds.). Tampere: Tampere University of Technology. Department of Intelligent Hydraulics and Automation, p. 9-13 (GIM Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  40. Published

    Automaattinen öljyn epäpuhtauksien mittaus - hiukkausmittauksen periaatteet ja tekniikka v. 2009

    Multanen, P., Niiranen, E. & Rinkinen, J., 2009, PAMAS 2009 käyttäjäpäivät 10.-11.2.2009, Öljyjärjestelmien hiukkaslaskentakoulutus, Tampereen teknillinen yliopisto, Tampere, Finland. Rinkinen, J., Multanen, P., Elo, L. & Niiranen, E. (eds.). p. 62-85

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  41. Published

    Automated object locator in a forest forwarder

    Hahto, A., Mattila, J. & Koivisto, H., 2010, In : Applied Artificial Intelligence. 24, 7, p. 711-721

    Research output: Contribution to journalArticleScientificpeer-review

  42. Published

    Automatic testing in the integration phase of mobile work machine (TINAT) - MASIT31

    Multanen, P., Hyvönen, M., Ellman, A., Rantala, S. & Alanen, J., 2008, Tekes.

    Research output: Book/ReportCommissioned reportProfessional

  43. Published

    Autonomous excavation

    Karhu, O., 2009, The Second Workshop on Generic Intelligent Machines, May 14-15, 2009, Tampere University of Technology, Tampere, Finland. Huhtala, K. & Uusi-Heikkilä, J. (eds.). p. 10 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  44. Published

    Autonomous excavation using hydraulic mobile machine retrofitted with electronic control system

    Karhu, O., Uusisalo, J., Honkakorpi, J. & Huhtala, K., 2008, Proceedings of the 7th JFPS International Symposium on Fluid Power, Toyama 2008, September 15-18, 2008. Tanaka, Y. (ed.). p. 359-362

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  45. Published

    Autonomous fleet management utilizing OpenSplice DDS

    Rasi, T., 2011, Proceedings of the 5th GIM Scientific Workshop at Aalto University School of Electrical Engineering 29.-30.11.2011. Espoo: Aalto University, p. 88-102 15 p. (GIM Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  46. Published

    Autonomous motion control of a wheel loader

    Ghabcheloo, R., Hyvönen, M., Uusisalo, J., Karhu, O., Järä, J. & Huhtala, K., 2009, Proceedings of the ASME 2009 Dynamic Systems and Control Conference (DSCC2009), October 12-14, 2009, Hollywood, California, USA. p. 8 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  47. Published

    Autonomous motion control of a wheel loader

    Ghabcheloo, R., Hyvönen, M., Uusisalo, J., Karhu, O., Järä, J. & Huhtala, K., 2009, The Second Workshop on Generic Intelligent Machines, May 14-15, 2009, Tampere University of Technology, Tampere, Finland. Huhtala, K. & Uusi-Heikkilä, J. (eds.). p. 11 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  48. Published

    Autonomous pallet picking of GIM machine

    Hyvönen, M., Ghabcheloo, R., Mantere, P., Kolu, A. & Huhtala, K., 2011, Proceedings of the 5th GIM Scientific Workshop at Aalto University School of Electrical Engineering 29.-30.11.2011. Espoo: Aalto University, p. 30-36 (GIM Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  49. Published

    A virtual engineering based method for maintainability design

    Lind, S., Leino, S-P., Multanen, P., Mäkiranta, A. & Heikkilä, J., 2009, Maintenance Management Conference 2009, Fourth International Conference on Maintenance and Facility Management, Rome, Italy, 22-24.4.2009. p. 117-122

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  50. Published

    Calibration and compensation of deflections and compliances in remote handling equipment configurations

    Kivelä, T., Saarinen, H., Mattila, J., Hämäläinen, V., Siuko, M. & Semeraro, L., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 2043-2046

    Research output: Contribution to journalArticleScientificpeer-review

Previous 1 2 3 4 5 6 7 Next

ID: 21447