Tampere University of Technology

TUTCRIS Research Portal

Department of Intelligent Hydraulics and Automation

Research unit: Department

  1. Published

    Digital Hydraulic Cylinder Drive For Folding Cargo Hatches

    Westerlund, S. & Mäkinen, E., 2012, Proceedings of the 7th FPNI PhD Symposium on Fluid Power, University of Modena and Reggio Emilia, June 27-30, 2012, Reggio Emilia, Italy. Milani, M., Montorsi, L. & Paltrinieri, F. (eds.). Fluid Power Net International, p. 235-248 (Fluid Power Net International PhD Symposium; vol. 7).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  2. Published

    Digital hydraulic power management system - towards lossless hydraulics

    Linjama, M. & Huhtala, K., 2010, Proceedings of the Third Workshop on Digital Fluid Power, October 13-14 2010, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). p. 5-22

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  3. Published

    Digital hydraulic pressure control

    Ijas, M., Mäkinen, E. & Linjama, M., 2009, The 11th Scandinavian International Conference on Fluid Power SICFP'09, Linköping, Sweden, June 2-4 2009. p. 12 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  4. Published

    Digital Hydraulic Pressure Relief Function

    Ketonen, M., Huova, M., Heikkilä, M., Linjama, M., Boström, P. & Walden, M., 2012, Fluid Power and Motion Control, FPMC 2012, University of Bath, UK. Johnston, D. N. & Plummer, A. R. (eds.). Bath, United Kingdom: Centre for Power Transmission and Motion Control, University of Bath, ASME, p. 137-150 (Bath/ASME Symposium on Fluid Power and Motion Control).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  5. Published

    Digital hydraulics in workboat propulsion control

    Perukangas, M. & Mäkinen, E., 2010, Proceedings of the Third Workshop on Digital Fluid Power, October 13-14 2010, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). p. 153-166

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  6. Published

    Digital hydraulics in working actions in mobile machines

    Huova, M. & Karvonen, M., 2009, The Second Workshop on Generic Intelligent Machines, May 14-15, 2009, Tampere University of Technology, Tampere, Finland. Huhtala, K. & Uusi-Heikkilä, J. (eds.). p. 9 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  7. Published

    Digital hydraulics research at IHA

    Linjama, M., 2008, Proceedings of the First Workshop on Digital Fluid Power 3rd October, 2008, Tampere, Finland. Linjama, M. & Laamanen, A. (eds.). p. 7-30

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  8. Published

    Digital hydraulics - Towards perfect valve technology

    Linjama, M. & Vilenius, M., 2008, In : Ventil - Journal for Hydraulics, Automation and Mechatronics. 14, 2, p. 138-148

    Research output: Contribution to journalArticleScientificpeer-review

  9. Published

    Digital microhydraulics

    Linjama, M. & Karvonen, M., 2008, Proceedings of the First Workshop on Digital Fluid Power 3rd October, 2008, Tampere, Finland. Linjama, M. & Laamanen, A. (eds.). p. 141-152

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  10. Published

    Digital pump-motor with independent outlets

    Linjama, M. & Huhtala, K., 2009, The 11th Scandinavian International Conference on Fluid Power SICFP'09, Linköping, Sweden, June 2-4 2009. p. 16 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  11. Published

    Digital schlägt Analog um 40%

    Linjama, M., 2008, In : Fluid. 7-8/2008, p. 12-13

    Research output: Contribution to journalArticleProfessional

  12. Published

    Direct connection of digital hydraulic power management system and double acting cylinder - a simulation study

    Heikkilä, M. & Linjama, M., 2011, The Fourth Workshop on Digital Fluid Power, 21st-22nd November, 2011, Linz, Austria. Linz: DFP-Workshops, p. 59-74 (Workshop on Digital Fluid Power; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  13. Published

    Discussion: Is the future of fluid power digital? Response

    Linjama, M., Scheidl, R. & Schmidt, S., 2012, In : Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering. 226, I6, p. 726-727

    Research output: Contribution to journalArticleScientific

  14. Published

    Displacement controlled hydraulic systems

    Ahola, V., 2010, Proceedings of the 3rd GIM Scientific Workshop, February 17-18, 2010, Aalto University School of Science and Technology. Halme, A. & Pirttioja, T. (eds.). Espoo, p. 1-13 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  15. Published

    Displacement controlled machines

    Ahola, V., 2011, Proceedings of the 5th GIM Scientific Workshop at Aalto University School of Electrical Engineering 29.-30.11.2011. Espoo: Aalto University, p. 124-131 (GIM Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  16. Published

    Divertor RH design updates and DTP2 Phase 2 testing

    Siuko, M., Järvenpää, J. & Mattila, J., 2011, Espoo: VTT. 6 p. (VTT Publications; vol. 764)

    Research output: Book/ReportCommissioned reportProfessional

  17. Published

    Driving feel generation of the mobile machine simulator with the water hydraulic 6-DOF motion platform

    Rokala, M., Sairiala, H. & Koskinen, K. T., 2010, 7th International Fluid Power Conference (7th IFK), 22-24 March 2010, Aachen, Germany. p. 1-12 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  18. Published

    DTP2 control room operator and remote handing operation designer responsibilities and information available to them

    Aha, L., Salminen, K., Hahto, A., Saarinen, H., Mattila, J., Siuko, M. & Semeraro, L., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 2078-2081

    Research output: Contribution to journalArticleScientificpeer-review

  19. Published

    Dynamic analysis of a bistable actuator for digital hydraulics

    Uusitalo, J-P., Söderlund, L., Kettunen, L., Linjama, M. & Vilenius, M., 2009, In : IET Science Measurement and Technology. 3, 3, p. 235-243

    Research output: Contribution to journalArticleScientificpeer-review

  20. Published

    Dynamic real-time simulation of intelligent mobile machines

    Multanen, P., Hyvönen, M., Saarinen, J. & Vilenius, M., 2008, Proceedings of the 27th IASTED International Conference Modelling, Identification, and Control, February 11-13, 2008, Innsbruck, Austria. p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  21. Published

    EFDA quality assurance exercise

    Mattila, J. & Järvenpää, J., 2008, Espoo: VTT. 2 p. (VTT Publications; vol. 678)

    Research output: Book/ReportCommissioned reportProfessional

  22. Published

    Effect of fluid properties on power system dynamics

    Karjalainen, J-P., 2009, The Second Workshop on Generic Intelligent Machines, May 14-15, 2009, Tampere University of Technology, Tampere, Finland. Huhtala, K. & Uusi-Heikkilä, J. (eds.). p. 6 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  23. Published

    Effect of oil viscosity on filter performance in lubrication oil system

    Heiskanen, V., Mäkelä, T., Kapanen, P. & Rinkinen, J., 2012, Proceedings of the 11th World Filtration Congress & Exhibition, WFC11, April 16-20, 2012, Graz, Austria. Vienna, Austria: Gesellschaft Österreichischer Chemiker GÖCH, p. 1-15 15 p. (World Filtration Congress).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  24. Published

    Effects of remote control on usability of hydraulic excavator

    Uusisalo, J., Huhtala, K. & Vilenius, M., 2009, Proceedings of the ASME 2009 Dynamic Systems and Control Conference (DSCC2009) October 12-14, 2009, Hollywood, California, USA. p. 8 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  25. Published

    Elintarviketeollisuuden koneautomaation kehitys kaipaa tiivistämistä

    Sairiala, H. & Koskinen, K. T., 2012, In : Kehittyvä elintarvike. 23, 4, p. 12-13

    Research output: Contribution to journalArticleProfessional

  26. Published

    Emission of combustion engines - also a challenge to hydraulics

    Huhtala, K. & Vilenius, M., 2008, Proceedings of the 6th International Fluid Power Conference Dresden, Fluid Power in Motion, 6iFK, April 1.-2.2008, Dresden. p. 423-438

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  27. Published

    Energy distribution and optimization of the valve controlled actuation system

    Herranen, M., 2011, Proceedings of the 5th GIM Scientific Workshop at Aalto University School of Electrical Engineering 29.-30.11.2011. Espoo: Aalto University, p. 111-124 14 p. (GIM Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  28. Published

    Energy efficiency of three-chamber cylinder with digital valve system

    Huova, M., Laamanen, A. & Linjama, M., 2010, In : International Journal of Fluid Power. 11, 3, p. 15-22

    Research output: Contribution to journalArticleScientificpeer-review

  29. Published

    Energy efficient control of multiactuator digital hydraulic mobile machine

    Huova, M., Karvonen, M., Ahola, V., Linjama, M. & Vilenius, M., 2010, 7th International Fluid Power Conference (7th IFK), 22-24 March 2010, Aachen, Germany. p. 1-12 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  30. Published

    Energy efficient digital hydraulic force control

    Hopponen, V., Linjama, M., Ikonen, A., Rintamäki, P., Pietola, M. & Vilenius, M., 2009, The 11th Scandinavian International Conference on Fluid Power SICFP'09, Linköping, Sweden, June 2-4 2009. p. 11 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  31. Published

    Energy efficient digital hydraulic solutions for mobile booms

    Karvonen, M., 2011, GIM - Generic Intelligent Machines, The 4th GIM Scientific Workshop, January 18-19, 2011, Tampere University of Technology, Tampere, Finland. Tampere: Tampere University of Technology, p. 1-4 4 p. (GIM Scientific Workshop; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  32. Published

    Energy efficient digital hydraulic valve control

    Huova, M., 2011, GIM - Generic Intelligent Machines, The 4th GIM Scientific Workshop, January 18-19, 2011, Tampere University of Technology, Tampere, Finland. Tampere: Tampere University of Technology, p. 1-6 6 p. (GIM Scientific Workshop; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  33. Published

    Energy efficient digital hydraulic valve control utilizing pressurized tank line

    Huova, M. & Linjama, M., 2012, Proceedings of the 8th International Fluid Power Conference Dresden, March 26-28, 2012. Dresden: Technische Universutät Dresden, Dresdner Verein zur Förderung der Fluidtechnik, p. 111-122 12 p. (International Fluid Power Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  34. Published

    Energy saving digital hydraulics

    Linjama, M., 2009, Proceedings of The Second Workshop on Digital Fluid Power, 12-13 November 2009, Linz, Austria. Scheidl, R. & Winkler, B. (eds.). p. 5-20

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  35. Published

    Energy Saving with Pump Control in Working Hydraulics

    Tikkanen, R., Ahola, V. & Uusi-Heikkilä, J., 2012, GIM - Generic Intelligent Machines, Proceedings of the 6th GIM Scientific Workshop, November 7-8, 2012, Tampere, Finland. Huhtala, K. & Uusi-Heikkilä, J. (eds.). Tampere: Tampere University of Technology. Department of Intelligent Hydraulics and Automation, p. 77-81 (GIM Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  36. Published

    Engine gas exchange controlled by digital hydraulics

    Herranen, M., Siivonen, L. & Huhtala, K., 2011, Proceedings of the 2nd International Conference on Measurement and Control Engineering, ICMCE 2011, October 21-22, 2011, Puerto Rico, USA. New York, NY: ASME Press, p. 1-7 7 p. (International Conference on Measurement and Control Engineering ICMCE; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  37. Published

    Enhanced industrial maintenance work task planning by using virtual engineering tools and haptic user interfaces

    Leino, S-P., Lind, S., Poyade, M., Kiviranta, S., Multanen, P., Reyes-Lecuona, A., Mäkiranta, A. & Muhammad, A., 2009, In : Lecture Notes in Computer Science. 5622, p. 346-354

    Research output: Contribution to journalArticleScientificpeer-review

  38. Published

    Enhanced mobile machine assembly and maintainability evaluation using virtual and augmented reality

    Mäkiranta, A., Nuutinen, P., Multanen, P., Hyvönen, M., Leino, S-P., Kiviranta, S. & Vehviläinen, M., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Tampere: Scandinavian International Conference on Fluid Power, p. 295-304 (Scandinavian International Conference on Fluid Power SICFP; vol. 12, no. 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  39. Published

    Etelä-Afrikan Tribologia 2008 -konferenssi

    Rinkinen, J. & Löppönen, M., 2008, In : Fluid Finland. p. 20-23

    Research output: Contribution to journalArticleProfessional

  40. Published

    Experiences and equipment in condition monitoring and in-line maintenance of oil

    Rinkinen, J. & Elo, L., 2008, Proceedings of the 8th International CJC Sales Meeting, May 13th-15th, 2008, Denmark. p. 56 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  41. Published

    Experiences of monitoring the condition of military aircraft hydraulic systems

    Virta, P., Aaltonen, J., Koskinen, K. T. & Vilenius, M., 2010, In : Condition Monitor. 280, p. 9-14

    Research output: Contribution to journalArticleProfessional

  42. Published

    Experiences on the condition monitoring of military aircraft hydraulic systems

    Virta, P., Aaltonen, J., Koskinen, K. T. & Vilenius, M., 2009, The Sixth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, Dublin, Ireland, 23-25 June 2009. p. 753-764

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  43. Published

    Experimental and numerical analysis of the hydraulic circuit of a high pressure common rail diesel fuel injection system

    Beierer, P., 21 Dec 2007, Tampere: Tampere University of Technology. 198 p. (Tampere University of Technology. Publication; vol. 715)

    Research output: Book/ReportDoctoral thesisMonograph

  44. Published

    Experimental evaluation of a digital hydraulic power management system

    Heikkilä, M., Tammisto, J., Huova, M., Huhtala, K. & Linjama, M., 2010, Proceedings of the Third Workshop on Digital Fluid Power, October 13-14 2010, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). p. 129-142

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  45. Published

    Experimental evaluation of a piston-type digital pump-motor-transformer with two independent outlets

    Heikkilä, M., Tammisto, J., Huova, M., Huhtala, K. & Linjama, M., 2010, Fluid Power and Motion Control (FPMC 2010), 15-17 September 2010, University of Bath, UK. Johnston, D. N. & Plummer, A. (eds.). p. 83-97

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  46. Published

    Experimental study on control system distribution and effects of remote control in hydraulic mobile machines

    Uusisalo, J., 2010, Proceedings of the 3rd GIM Scientific Workshop, February 17-18, 2010, Aalto University School of Science and Technology. Halme, A. & Pirttioja, T. (eds.). p. 1-11 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  47. Published

    Experimental study on effects of remote control and control system distribution in hydraulic mobile machines

    Uusisalo, J. & Huhtala, K., 2010, Proceedings of the Post-Graduate Workshop on Intelligent Machines and Transport Systems, May 3-7, 2010, CERN, Switzerland. Karvinen, T. & Keskinen, E. (eds.). p. 1-11 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  48. Published

    Fault Tolerance with digital Hydraulic Valve System

    Siivonen, L., Linjama, M. & Vilenius, M., 2011, The Eight International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 20-22 June 2011, Cardiff, Wales. Northamption: British Institute of Non-destructive Testing, p. 1250-1262 (International Conference on Condition Monitoring and Machinery Failure Prevention Technologies; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  49. Published

    Fault tolerant digital valve system and fault tolerant control

    Siivonen, L., 2008, Proceedings of the First Workshop on Digital Fluid Power 3rd October, 2008, Tampere, Finland. Linjama, M. & Laamanen, A. (eds.). p. 77-88

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  50. Published

    Feature Extraction and Self-Organizing Maps in Condition Monitoring of Hydraulic Systems

    Krogerus, T., 28 Jan 2011, Tampere: Tampere University of Technology. 126 p. (Tampere University of Technology. Publication; vol. 949)

    Research output: Book/ReportDoctoral thesisMonograph

ID: 21447