Tampere University of Technology

TUTCRIS Research Portal

Department of Intelligent Hydraulics and Automation

Research unit: Department

  1. Conference contribution › Scientific › Peer-reviewed
  2. Published

    Energy efficient control of multiactuator digital hydraulic mobile machine

    Huova, M., Karvonen, M., Ahola, V., Linjama, M. & Vilenius, M., 2010, 7th International Fluid Power Conference (7th IFK), 22-24 March 2010, Aachen, Germany. p. 1-12 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  3. Published

    Energy efficient digital hydraulic force control

    Hopponen, V., Linjama, M., Ikonen, A., Rintamäki, P., Pietola, M. & Vilenius, M., 2009, The 11th Scandinavian International Conference on Fluid Power SICFP'09, Linköping, Sweden, June 2-4 2009. p. 11 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  4. Published

    Energy efficient digital hydraulic solutions for mobile booms

    Karvonen, M., 2011, GIM - Generic Intelligent Machines, The 4th GIM Scientific Workshop, January 18-19, 2011, Tampere University of Technology, Tampere, Finland. Tampere: Tampere University of Technology, p. 1-4 4 p. (GIM Scientific Workshop; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  5. Published

    Energy efficient digital hydraulic valve control

    Huova, M., 2011, GIM - Generic Intelligent Machines, The 4th GIM Scientific Workshop, January 18-19, 2011, Tampere University of Technology, Tampere, Finland. Tampere: Tampere University of Technology, p. 1-6 6 p. (GIM Scientific Workshop; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  6. Published

    Energy efficient digital hydraulic valve control utilizing pressurized tank line

    Huova, M. & Linjama, M., 2012, Proceedings of the 8th International Fluid Power Conference Dresden, March 26-28, 2012. Dresden: Technische Universutät Dresden, Dresdner Verein zur Förderung der Fluidtechnik, p. 111-122 12 p. (International Fluid Power Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  7. Published

    Energy saving digital hydraulics

    Linjama, M., 2009, Proceedings of The Second Workshop on Digital Fluid Power, 12-13 November 2009, Linz, Austria. Scheidl, R. & Winkler, B. (eds.). p. 5-20

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  8. Published

    Energy Saving with Pump Control in Working Hydraulics

    Tikkanen, R., Ahola, V. & Uusi-Heikkilä, J., 2012, GIM - Generic Intelligent Machines, Proceedings of the 6th GIM Scientific Workshop, November 7-8, 2012, Tampere, Finland. Huhtala, K. & Uusi-Heikkilä, J. (eds.). Tampere: Tampere University of Technology. Department of Intelligent Hydraulics and Automation, p. 77-81 (GIM Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  9. Published

    Engine gas exchange controlled by digital hydraulics

    Herranen, M., Siivonen, L. & Huhtala, K., 2011, Proceedings of the 2nd International Conference on Measurement and Control Engineering, ICMCE 2011, October 21-22, 2011, Puerto Rico, USA. New York, NY: ASME Press, p. 1-7 7 p. (International Conference on Measurement and Control Engineering ICMCE; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  10. Published

    Enhanced mobile machine assembly and maintainability evaluation using virtual and augmented reality

    Mäkiranta, A., Nuutinen, P., Multanen, P., Hyvönen, M., Leino, S-P., Kiviranta, S. & Vehviläinen, M., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Tampere: Scandinavian International Conference on Fluid Power, p. 295-304 (Scandinavian International Conference on Fluid Power SICFP; vol. 12, no. 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  11. Published

    Experiences and equipment in condition monitoring and in-line maintenance of oil

    Rinkinen, J. & Elo, L., 2008, Proceedings of the 8th International CJC Sales Meeting, May 13th-15th, 2008, Denmark. p. 56 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  12. Published

    Experiences on the condition monitoring of military aircraft hydraulic systems

    Virta, P., Aaltonen, J., Koskinen, K. T. & Vilenius, M., 2009, The Sixth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, Dublin, Ireland, 23-25 June 2009. p. 753-764

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  13. Published

    Experimental evaluation of a digital hydraulic power management system

    Heikkilä, M., Tammisto, J., Huova, M., Huhtala, K. & Linjama, M., 2010, Proceedings of the Third Workshop on Digital Fluid Power, October 13-14 2010, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). p. 129-142

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  14. Published

    Experimental evaluation of a piston-type digital pump-motor-transformer with two independent outlets

    Heikkilä, M., Tammisto, J., Huova, M., Huhtala, K. & Linjama, M., 2010, Fluid Power and Motion Control (FPMC 2010), 15-17 September 2010, University of Bath, UK. Johnston, D. N. & Plummer, A. (eds.). p. 83-97

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  15. Published

    Experimental study on control system distribution and effects of remote control in hydraulic mobile machines

    Uusisalo, J., 2010, Proceedings of the 3rd GIM Scientific Workshop, February 17-18, 2010, Aalto University School of Science and Technology. Halme, A. & Pirttioja, T. (eds.). p. 1-11 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  16. Published

    Experimental study on effects of remote control and control system distribution in hydraulic mobile machines

    Uusisalo, J. & Huhtala, K., 2010, Proceedings of the Post-Graduate Workshop on Intelligent Machines and Transport Systems, May 3-7, 2010, CERN, Switzerland. Karvinen, T. & Keskinen, E. (eds.). p. 1-11 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  17. Published

    Fault Tolerance with digital Hydraulic Valve System

    Siivonen, L., Linjama, M. & Vilenius, M., 2011, The Eight International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 20-22 June 2011, Cardiff, Wales. Northamption: British Institute of Non-destructive Testing, p. 1250-1262 (International Conference on Condition Monitoring and Machinery Failure Prevention Technologies; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  18. Published

    Force-based and position-based impedance control of hydraulic manipulators

    Muhammad, A., Mattila, J., Virvalo, T. & Vilenius, M., 2009, The 11th Scandinavian International Conference on Fluid Power SICFP'09, Linköping, Sweden, June 2-4 2009. p. 15 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  19. Published

    Force-based impedance control of hydraulic manipulators and its relationship with position-based impedance control

    Muhammad, A., Mattila, J., Virvalo, T. & Vilenius, M., 2008, Proceedings of the 7th International Conference on Machine Automation ICMA2008, Service Robotics and Mechatronics, September 24-26, 2008, Awaji, Japan. p. pp. 327

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  20. Published

    From measurements data to information

    Krogerus, T., 2012, GIM - Generic Intelligent Machines, Proceedings of the 6th GIM Scientific Workshop , November 7-8, 2012, Tampere, Finland. Huhtala, K. & Uusi-Heikkilä, J. (eds.). Tampere: Tampere University of Technology. Department of Intelligent Hydraulics and Automation, p. 51-62 (GIM Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  21. Published

    Fundamentals of Digital Microhydraulic

    Linjama, M., 2012, Proceedings of the 8th International Fluid Power Conference, Dresden, March 26-28, 2012. Dresden: Technische Universität Dresden, Institute of Fluid Power, p. 385-396 (International Fluid Power Conference; vol. 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Previous 1...3 4 5 6 7 8 9 10 ...17 Next

ID: 21447