Tampere University of Technology

TUTCRIS Research Portal

Department of Intelligent Hydraulics and Automation

Research unit: Department

  1. I2 ICT software
  2. Published

    Puuvirta-virtuaalinen ja simuloitu oppimisympäristö

    Kortemaa, A., Moisio, M., Punki, J., Palonen, T., Ranta, P., Leino, T., Alarotu, V., Koskinen, K. T. & Tohu, J., 2011

    Research output: Artistic and non-textual formSoftwareScientific

  3. Published

    Virtuaalinen konelaboratorio työkonejärjestelmien opetukseen: Lihaako -projekti. Smart Simulators -tutkimusryhmä

    Mäkelä, T., Nurmi, J., Punki, J., Ranta, P., Tebest, T., Leino, T., Palonen, T., Helminen, M., Markkula, M. & Koskinen, K. T., 2010

    Research output: Artistic and non-textual formSoftwareScientific

  4. Published

    Metviro

    Kortemaa, A., Mäkelä, T., Punki, J., Ranta, P., Palonen, T., Leino, T. & Koskinen, K. T., 2009

    Research output: Artistic and non-textual formSoftwareScientific

  5. H1 Granted patent
  6. Published

    Detecting of faults in a valve system and a fault tolerant control

    Siivonen, L. & Linjama, M., 2012, Patent No. Pat. US 8215227 B2, Priority date 10 Jul 2012, Priority No. (21) 11/991559;(30) FI 20055479

    Research output: PatentScientific

  7. Published

    Laitteisto, ohjauspiiri ja menetelmä paineen ja tilavuusvirran tuottamiseksi

    Linjama, M., Tammisto, J., Huhtala, K. & Vilenius, M., 2010, Patent No. Pat. FI 121090 B, Priority date 30 Jun 2010, Priority No. (21) FI 20085242

    Research output: PatentScientific

  8. G5 Doctoral dissertation (article)
  9. Published

    High-Pressure Properties of Hydraulic Fluid Dynamics and Second Order Polynomial Prediction Method

    Karjalainen, J-P., 2011, Tampere: Tampere University of Technology. 83 p. (Tampere University of Technology. Publication; vol. 983)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  10. Published

    Model-based design of power-split drivelines

    Erkkilä, M., 2009, Tampere: Tampere University of Technology. 102 p. (Tampereen teknillinen yliopisto. Julkaisu; vol. 835)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  11. Published

    Minimization of state transition uncertainty in the digital valve system

    Laamanen, A., 2009, Tampere: Tampere University of Technology. 111 p. (Tampereen teknillinen yliopisto. Julkaisu; vol. 809)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  12. Published

    On the flow and cavitation characteristics of water hydraulic seat valve structures

    Leino, T., 2008, Tampere: Tampere University of Technology. (Tampereen teknillinen yliopisto. Julkaisu; vol. 722)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  13. Published

    Life in the water hydraulics system

    Riipinen, H., 2008, Tampere: Tampere University of Technology. (Tampereen teknillinen yliopisto. Julkaisu; vol. 716)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  14. G4 Doctoral dissertation (monograph)
  15. Published

    Development of Remote Handling Pipe Jointing Tools for ITER

    Shuff, R. E., 30 Mar 2012, Tampere University of Technology. 148 p. (Tampere University of Technology. Publication; vol. 1026)

    Research output: Book/ReportDoctoral thesisMonograph

  16. Published

    Analysis of Slipper Structures in Water Hydraulic Axial Piston Pumps

    Rokala, M., 2012, Tampere: Tampere University of Technology. (Tampereen teknillinen yliopisto, Julkaisu; no. 1055)

    Research output: Book/ReportDoctoral thesisMonograph

  17. Published

    Modelling and Robust Control of Hydraulic Manipulators

    Zhai, L., 2012, Tampere: Tampere University of Technology. 98 p. (Tampere University of Technology. Publication; no. 1069)

    Research output: Book/ReportDoctoral thesisMonograph

  18. Published

    Impedance Control of Redundant Manipulators

    Muhammad, A., 4 Nov 2011, Tampere University of Technology. 169 p. (Tampere University of Technology. Publication; vol. 986)

    Research output: Book/ReportDoctoral thesisMonograph

  19. Published

    Feature Extraction and Self-Organizing Maps in Condition Monitoring of Hydraulic Systems

    Krogerus, T., 28 Jan 2011, Tampere: Tampere University of Technology. 126 p. (Tampere University of Technology. Publication; vol. 949)

    Research output: Book/ReportDoctoral thesisMonograph

  20. Published

    A Case Study on Effects of Remote Control and Control System Distribution in Hydraulic Mobile Machines

    Uusisalo, J., 2011, Tampere: Tampere University of Technology. 111 p. (Tampere University of Technology. Publication; vol. 960)

    Research output: Book/ReportDoctoral thesisMonograph

  21. Published

    A new approach for numerical simulation of fluid power circuits using Rosenbrock methods

    Esque, S., 28 Nov 2008, Tampere: Tampere University of Technology. 125 p. (Tampere University of Technology. Publication; vol. 763)

    Research output: Book/ReportDoctoral thesisMonograph

  22. Published

    Experimental and numerical analysis of the hydraulic circuit of a high pressure common rail diesel fuel injection system

    Beierer, P., 21 Dec 2007, Tampere: Tampere University of Technology. 198 p. (Tampere University of Technology. Publication; vol. 715)

    Research output: Book/ReportDoctoral thesisMonograph

  23. D5 Text book, professional manual or guide or a dictionary
  24. Published

    Koneenosien suunnittelu

    Airila, M., Ekman, K., Hautala, P., Kivioja, S., Kleimola, M., Martikka, H., Miettinen, J., Niemi, E., Ranta, A., Rinkinen, J., Salonen, P., Verho, A., Vilenius, M. & Välimaa, V., 2010, Unknown Publisher. 796 p.

    Research output: Book/ReportBookProfessional

  25. D4 Published development or research report or study
  26. Published

    2008-2010 Host Activities Related to DTP2 Test Facility Operation and Upgrade Preparation

    Siuko, M., Järvenpää, J. & Mattila, J., 2011, Valtion teknillinen tutkimuslaitos. 11 p. (VTT Publications; vol. 764)

    Research output: Book/ReportCommissioned reportProfessional

  27. Published

    Divertor RH design updates and DTP2 Phase 2 testing

    Siuko, M., Järvenpää, J. & Mattila, J., 2011, Espoo: VTT. 6 p. (VTT Publications; vol. 764)

    Research output: Book/ReportCommissioned reportProfessional

  28. Published

    2008-2009 Host Activities Related to DTP2 Test Facility Operation and Upgrade Preparation

    Siuko, M., Järvenpää, J. & Mattila, J., 2010, VTT. 12 p. (VTT Publications; vol. 738)

    Research output: Book/ReportCommissioned reportProfessional

  29. Published

    2008-2009 Host Activities Related to DTP2 Test Facility Operation and Upgrade Preparation

    Siuko, M., Järvenpää, J. & Mattila, J., 2009, VTT. 10 p. (VTT Publications; vol. 709)

    Research output: Book/ReportCommissioned reportProfessional

  30. Published

    Implementation of a DTP2 safety system for testing, and final CMM/SCEE integration and commissioning

    Mattila, J. & Järvenpää, J., 2009, VTT. 3 p. (VTT Publications; vol. 709)

    Research output: Book/ReportCommissioned reportProfessional

  31. Published

    Host activities in connection with the DTP2 test facility

    Järvenpää, J., Timperi, A., Tuominen, R. & Mattila, J., 2008, Espoo: VTT. 5 p. (VTT Publications; vol. 678)

    Research output: Book/ReportCommissioned reportProfessional

  32. Published

    Software development and modelling of the CMM system

    Mattila, J., 2008, Espoo: VTT. 2 p. (VTT Publications; vol. 678)

    Research output: Book/ReportCommissioned reportProfessional

  33. Published

    Development of DTP2 subsystems and tooling in support of remote handling trials

    Mattila, J., 2008, Espoo: VTT. 7 p. (VTT Publications; vol. 678)

    Research output: Book/ReportCommissioned reportProfessional

  34. Published

    Implementation of a DTP2 safety system for testing, and final CMM/SCEE integration and commissioning

    Mattila, J. & Järvenpää, J., 2008, Espoo: VTT. 3 p. (VTT Publications; vol. 678)

    Research output: Book/ReportCommissioned reportProfessional

  35. Published

    Virtual engineering and remote operation in design, training and completon of demanding maintenance work tasks in challenging industrial plants (VIRVO) - MASIT15

    Leino, S-P., Helin, K., Lind, S., Viitaniemi, H., Multanen, P., Mäkiranta, A., Lahtinen, J., Nuutinen, P., Heikkilä, J-M. & Martikainen, T., 2008, Tekes. 10 p.

    Research output: Book/ReportCommissioned reportProfessional

  36. Published

    Automatic testing in the integration phase of mobile work machine (TINAT) - MASIT31

    Multanen, P., Hyvönen, M., Ellman, A., Rantala, S. & Alanen, J., 2008, Tekes.

    Research output: Book/ReportCommissioned reportProfessional

  37. Published

    EFDA quality assurance exercise

    Mattila, J. & Järvenpää, J., 2008, Espoo: VTT. 2 p. (VTT Publications; vol. 678)

    Research output: Book/ReportCommissioned reportProfessional

  38. D3 Professional conference proceedings
  39. Published

    Kokemuksia inline- ja online-mittauksista - ISO/SAE -standardit

    Elo, L., Pekkonen, J. & Rinkinen, J., 2012, KompuNW -verkostoseminaari TTY:ssa 9.10.2012. Tampere: Tampere University of Technology, IHA - Department of Intelligent Hydraulics and Automation, p. 1-13 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  40. Published

    IHA:n KompuNW-testipenkillä tehtyjä mittauksia

    Pekkonen, J., Elo, L., Kuosku, M. & Rinkinen, J., 2012, KompuNW -verkostoseminaari TTY:ssa 9.10.2012. Tampere: Tampere University of Technology, IHA - Department of Intelligent Hydraulics and Automation, p. 1-16 16 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  41. Published

    Mittaustuloksia kaupallisilla puhtaustestikaapeilla

    Kuosku, M., Pekkonen, J. & Rinkinen, J., 2012, KompuNW -verkostoseminaari TTY:ssa 9.10.2012. Tampere: Tampere University of Technology, IHA - Department of Intelligent Hydraulics and Automation, p. 1-15 15 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  42. Published

    Voiteluöljyn online- ja inline-kunnonvalvonta, "Uusia tapoja ja menetelmiä öljyn kunnon ja vaihtovälin määrittelemiseksi"

    Elo, L. & Rinkinen, J., 2012, Voiteluaineanalyysit mittaavan kunnossapidon työkaluna, AEL -seminaari 29.8.2012. Helsinki: Elinkeinoelämän koulutuspalvelut, p. 1-14 14 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  43. Published

    Komponentin ja järjestelmän elinkaaren mallintaminen analyyttisillä menetelmillä

    Aaltonen, J., 2012, Hydraulijärjestelmien modernisointi, 21.-22.3.2012, Suomen ilmailumuseo, Vantaa, Kunnossapitoyhdistys. Helsinki: Kunnossapitoyhdistys ProMaint, p. 1-9 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  44. D1 Article in a trade journal
  45. Published

    Digitaalinen Hydraulisäätö - tulevaisuuden tekniikkaa?

    Siivonen, L., 2012, In : Promaint. 26, 7, p. 41-43

    Research output: Contribution to journalArticleProfessional

  46. Published

    Hydrauliikan aika ei ole ohi - The time of hydraulics is not over

    Linjama, M., 2012, In : Fluid Finland. 11, 2, p. 10-12

    Research output: Contribution to journalArticleProfessional

  47. Published

    Elintarviketeollisuuden koneautomaation kehitys kaipaa tiivistämistä

    Sairiala, H. & Koskinen, K. T., 2012, In : Kehittyvä elintarvike. 23, 4, p. 12-13

    Research output: Contribution to journalArticleProfessional

  48. Published

    Versatile maintenance solutions in oil related systems

    Rinkinen, J., 2011, In : Condition Monitor. 296, p. 5-12

    Research output: Contribution to journalArticleProfessional

  49. Published

    IHA Department of Intelligent Hydraulics and Automation

    Huhtala, K. & Aunola, V., 2011, In : Fluid Finland. 10, 1, p. 10-11

    Research output: Contribution to journalArticleProfessional

  50. Published

    Hiukkasen puhtaammaksi -laboratorio hydraulikomponenttien puhtaustutkimuksiin

    Kuosku, M. & Rinkinen, J., 2011, In : Promaint. 25, 5, p. 42-45

    Research output: Contribution to journalArticleProfessional

  51. Published

    Recent advances in standardisation and education of fluid power in Finland

    Rinkinen, J., Lahtinen, J. & Virta, S., 2011, In : Maintworld, Maintenance & Asset Management. 3, 2, p. 14-18

    Research output: Contribution to journalArticleProfessional

  52. Published

    Hydrauliikan vianetsintä -säästöä systemaattisella toiminnalla

    Törmänen, R., Räihä, K. & Rinkinen, J., 2011, In : Promaint. 25, 5, p. 50-53 4 p.

    Research output: Contribution to journalArticleProfessional

  53. Published

    Digitaalihydrauliikka tulee!

    Linjama, M., 2010, In : Metsäalan ammattilehti. 5, p. 88-89

    Research output: Contribution to journalArticleProfessional

  54. Published

    Experiences of monitoring the condition of military aircraft hydraulic systems

    Virta, P., Aaltonen, J., Koskinen, K. T. & Vilenius, M., 2010, In : Condition Monitor. 280, p. 9-14

    Research output: Contribution to journalArticleProfessional

  55. Published

    Puhtauden valvonta kehittyy

    Rinkinen, J., 2009, In : Promaint. 5/2009, p. 48-53

    Research output: Contribution to journalArticleProfessional

  56. Published

    Väitöskirjan esittely. Nopeutta virtuaalisuunnitteluun uudella integrointialgoritmilla. Rosenbrockin menetelmä on uusi hydraulipiirien numeerisen simuloinnin lähestymistapa

    Esque, S., 2009, In : Fluid Finland. 1/2009, p. 8-11

    Research output: Contribution to journalArticleProfessional

  57. Published

    Hydraulikomponenttien ja -järjestelmien puhtausvalvontastandardien nykytila

    Rinkinen, J., 2009, In : Fluid Finland. 3-4, p. 32-38

    Research output: Contribution to journalArticleProfessional

  58. Published

    IHA digitaalihydrauliikalla maailman ykköseksi

    Vilenius, M., 2009, In : Fluid Finland. p. s. 5

    Research output: Contribution to journalArticleProfessional

  59. Published

    Tavoitteena häviötön hydrauliikka

    Linjama, M., 2009, In : Fluid Finland. 3-4, p. 12-17

    Research output: Contribution to journalArticleProfessional

  60. Published

    Putkistopasseja TTY/IHA:n henkilökunnalle

    Rinkinen, J., 2009, In : Fluid Finland. 2/2009, p. 24-27

    Research output: Contribution to journalArticleProfessional

  61. Published

    Digitaalisen mikrohydrauliikan sovellussatoa

    Linjama, M., 2009, In : Fluid Finland. 2/2009, p. 30-31

    Research output: Contribution to journalArticleProfessional

  62. Published

    FPMC Symposiumi Iso-Britanniassa

    Elo, L., 2008, In : Fluid Finland. 3, p. 32-34

    Research output: Contribution to journalArticleProfessional

  63. Published

    Digitaalihydrauliikan seminaarin suosio yllätti

    Linjama, M., 2008, In : Fluid Finland. 3, p. 36-37

    Research output: Contribution to journalArticleProfessional

  64. Published

    Nya standarder i Finland för hur industrihydrauliksystem skall upphandlas

    Rinkinen, J. & Viertävä, J., 2008, In : Fluid Scandinavica, Specialtidningen för hydraulik/pneumatik. 1, p. 35-36

    Research output: Contribution to journalArticleProfessional

  65. Published

    Virtauksen perusilmiöt vesihydrauliikan istukkaventtiilissä

    Leino, T., 2008, In : Fluid Finland. 3, p. 12-15

    Research output: Contribution to journalArticleProfessional

  66. Published

    Etelä-Afrikan Tribologia 2008 -konferenssi

    Rinkinen, J. & Löppönen, M., 2008, In : Fluid Finland. p. 20-23

    Research output: Contribution to journalArticleProfessional

  67. Published

    Digital schlägt Analog um 40%

    Linjama, M., 2008, In : Fluid. 7-8/2008, p. 12-13

    Research output: Contribution to journalArticleProfessional

  68. Published

    Vesihydrauliikan kunnonvalvonta

    Riipinen, H., 2008, In : Fluid Finland. p. 12-14

    Research output: Contribution to journalArticleProfessional

  69. Published

    Digitaalihydrauliikan kuulumiset

    Linjama, M., 2008, In : Fluid Finland. 2, p. 8-10

    Research output: Contribution to journalArticleProfessional

  70. Published

    Vesihydrauliikan sovelluksia

    Sairiala, H. & Koskinen, K. T., 2008, In : Fluid Finland. p. 15-17

    Research output: Contribution to journalArticleProfessional

  71. C2 Edited books
  72. Published

    Proceedings of the fifth workshop on digital fluid power, October 24-25, 2012, Tampere, Finland

    Laamanen, A. (ed.) & Linjama, M. (ed.), 2012, Tampere: Tampere University of Technology. Department of Intellidgent Hydraulics and Automation.

    Research output: Book/ReportAnthologyScientificpeer-review

  73. Published

    Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland

    Sairiala, H. (ed.) & Koskinen, K. T. (ed.), 2011, Tampere: Tampere University of Technology.

    Research output: Book/ReportAnthologyScientificpeer-review

  74. Published

    Proceedings of the Third Workshop on Digital Fluid Power, October 13-14 2010, Tampere, Finland

    Laamanen, A. (ed.) & Linjama, M. (ed.), 2010, Tampere: Tampere University of Technology.

    Research output: Book/ReportAnthologyScientificpeer-review

  75. Published

    Proceedings of the First Workshop on Digital Fluid Power 3rd October, 2008 Tampere, Finland

    Linjama, M. (ed.) & Laamanen, A. (ed.), 2008, Tampere University of Technology.

    Research output: Book/ReportAnthologyScientificpeer-review

  76. C1 Separate scientific books
  77. Published

    Hydraulitekniikka (1. p.)

    Kauranne, H., Kajaste, J. & Vilenius, M., 2008, Helsinki: WSOY.

    Research output: Book/ReportBookScientificpeer-review

  78. B3 Non-refereed article in conference proceedings
  79. Published

    Proportional valve control of water-hydraulic systems

    Sairiala, H. & Koskinen, K. T., 2012, Topic water hydraulics, Dutch Fluid Power Conference, Ede, The Netherlands 13th September 2012. Vereniging Platform Hydrauliek, p. 49-63 (Dutch Fluid Power Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  80. Published

    A New Method and Format for Describing CANopen System Topology

    Helminen, M., Salonen, J., Saha, H., Nykänen, O., Koskinen, K. T., Ranta, P. & Pohjolainen, S., 2012, Proceedings of the 13th International CAN Conference, iCC 2012 in Hambach Castle, March 5 to March 6, Germany. CAN in Automation e.V., p. 1-8 8 p. (International CAN Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  81. Published

    Concept of the electro-water-hydraulic hybrid mobile machine

    Aaltonen, J., Sairiala, H. & Koskinen, K. T., 2012, Topic water hydraulics, Dutch Fluid Power Conference, Ede, The Netherlands 13th September 2012. p. 97-111 15 p. (Dutch Fluid Power Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  82. Published

    A mobile platform for remote inspection inside ESRF tunnel

    Chaize, J. M., Robinson, D., Hardy, L., Mattila, J. & Hahto, A., 2009, The International Conference on Accelerator and Large Experimental Physics Control Systems ICALEPCS 2009, October 12-16, 2009, Kobe, Japan. p. 3 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  83. Published

    Automaattinen öljyn epäpuhtauksien mittaus - hiukkausmittauksen periaatteet ja tekniikka v. 2009

    Multanen, P., Niiranen, E. & Rinkinen, J., 2009, PAMAS 2009 käyttäjäpäivät 10.-11.2.2009, Öljyjärjestelmien hiukkaslaskentakoulutus, Tampereen teknillinen yliopisto, Tampere, Finland. Rinkinen, J., Multanen, P., Elo, L. & Niiranen, E. (eds.). p. 62-85

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  84. Published

    Puhtauden mittauksen erityispiirteet sotilaslentokoneissa

    Aaltonen, J., 2009, PAMAS 2009 käyttäjäpäivät 10.-11.2.2009, Öljyjärjestelmien hiukkaslaskentakoulutus, Tampereen teknillinen yliopisto, Tampere, Finland. Rinkinen, J., Multanen, P., Elo, L. & Niiranen, E. (eds.). p. 121-127

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  85. Published

    Hydraulikomponenttien puhtausvalvontastandardien nykytilanne

    Rinkinen, J., 2009, PAMAS 2009 käyttäjäpäivät 10.-11.2.2009, Öljyjärjestelmien hiukkaslaskentakoulutus, Tampereen teknillinen yliopisto, Tampere, Finland. Rinkinen, J., Multanen, P., Elo, L. & Niiranen, E. (eds.). p. 134-160

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  86. Published

    Öljynäytteiden hiukkaslaskennan tärkeimmät standardit

    Niiranen, E., Elo, L. & Multanen, P., 2009, PAMAS 2009 käyttäjäpäivät 10.-11.2.2009, Öljyjärjestelmien hiukkaslaskentakoulutus, Tampereen teknillinen yliopisto, Tampere, Finland. Rinkinen, J., Multanen, P., Elo, L. & Niiranen, E. (eds.). p. 47-61

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  87. Published

    Turvallisuus hydraulijärjestelmän öljynäytteenotossa ja mittauksessa

    Karjalainen, R., 2009, PAMAS 2009 käyttäjäpäivät 10.-11.2.2009, Öljyjärjestelmien hiukkaslaskentakoulutus, Tampereen teknillinen yliopisto, Tampere, Finland. Rinkinen, J., Multanen, P., Elo, L. & Niiranen, E. (eds.). p. 116-120

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  88. Published

    A survey on control of hydraulic servo systems

    Zhai, L. & Virvalo, T., 2008, Fourth Arctic-Mediterranean Post Graduate Workshop on Intelligent Machines and Transport Systems, June 23-27, 2008, Saariselkä, Finland. Karvinen, T. & Keskinen, E. (eds.). p. 5 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  89. Published

    The means of optimizing digital valve system

    Laamanen, A., 2008, Proceedings of the First Workshop on Digital Fluid Power 3rd October, 2008, Tampere, Finland. Linjama, M. & Laamanen, A. (eds.). p. 89-99

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  90. Published

    Diesel engine hydraulics

    Huhtala, K., 2008, Proceedings of the First Workshop on Digital Fluid Power 3rd October, 2008, Tampere, Finland. Linjama, M. & Laamanen, A. (eds.). p. 129-140

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  91. Published

    Simulation as a tool for development of control and interface system module

    Hyvönen, M., Multanen, P. & Huhtala, K., 2008, 1st GIM Scientific Workshop at Helsinki University of Technology, 14.-15.8.2008. p. 87-91

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  92. Published

    Digital hydraulics research at IHA

    Linjama, M., 2008, Proceedings of the First Workshop on Digital Fluid Power 3rd October, 2008, Tampere, Finland. Linjama, M. & Laamanen, A. (eds.). p. 7-30

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  93. Published

    Digital microhydraulics

    Linjama, M. & Karvonen, M., 2008, Proceedings of the First Workshop on Digital Fluid Power 3rd October, 2008, Tampere, Finland. Linjama, M. & Laamanen, A. (eds.). p. 141-152

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  94. Published

    Fault tolerant digital valve system and fault tolerant control

    Siivonen, L., 2008, Proceedings of the First Workshop on Digital Fluid Power 3rd October, 2008, Tampere, Finland. Linjama, M. & Laamanen, A. (eds.). p. 77-88

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  95. Published

    A review of automated boom control and vibration damping methods for mobile machines

    Honkakorpi, J., 2008, Fourth Arctic-Mediterranean Post Graduate Workshop on Intelligent Machines and Transport Systems, June 23-27, 2008, Saariselkä, Finland. Karvinen, T. & Keskinen, E. (eds.). p. 6 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  96. B1 Article in a scientific magazine
  97. Published

    Discussion: Is the future of fluid power digital? Response

    Linjama, M., Scheidl, R. & Schmidt, S., 2012, In : Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering. 226, I6, p. 726-727

    Research output: Contribution to journalArticleScientific

  98. Published

    Hydrauliikan komponenttipuhtausstandardien hyödyntäminen suomalaisessa konepajateollisuudessa

    Rinkinen, J., 2010, In : Fluid Finland. 1/2010, p. 18-23

    Research output: Contribution to journalArticleScientific

  99. Published

    Reitinvalintaa rastilta seuraavalle

    Huhtala, K., 2010, In : Fluid Finland. 3-4, p. 7-7

    Research output: Contribution to journalArticleScientific

  100. Published

    Koulutuksesta ja tutkimuksesta

    Huhtala, K., 2010, In : Fluid Finland. 9, 3-4, p. 6-6

    Research output: Contribution to journalArticleScientific

  101. Published

    GVT-Getriebe mit hydrostatischer Verstelleinheit

    Erkkilä, M. & Viitasalo, V., 2010, In : Mobile Maschinen. 1/2010, p. 32-33

    Research output: Contribution to journalArticleScientific

  102. Published

    Matkaraportti: Digitaalihydrauliikan seminaari marraskuisessa Linzissä

    Linjama, M., 2010, In : Fluid Finland. 1/2010, p. 12-14

    Research output: Contribution to journalArticleScientific

  103. Published

    The energy balance of the electro-hydraulic linear actuation system

    Herranen, M., Huhtala, K. & Vilenius, M., 2010, In : Journal of Energy and Power Engineering. 4, 8, p. 57-63

    Research output: Contribution to journalArticleScientific

  104. Published

    Kehitystä putkistopassin koulutusmateriaaliin

    Rinkinen, J. & Virta, S., 2010, In : Fluid Finland. 1/2010, p. 28-30

    Research output: Contribution to journalArticleScientific

  105. Published

    M1-teknologialla voidaan rakentaa virtuaalisia oppimisympäristöjä ja konelaboratorioita

    Koskinen, K. T., Leino, T., Palonen, T. & Ranta, P., 2010, In : Fluid Finland. 2/2010, p. 18-20

    Research output: Contribution to journalArticleScientific

  106. Published

    Hydraulikomponenttien käyttöikä

    Rinkinen, J. & Immonen, A., 2010, In : Fluid Finland. 1/2010, p. 8-11

    Research output: Contribution to journalArticleScientific

  107. A4 Article in a conference publication
  108. Published

    Laminated manifold for digital hydraulics - principles, challenges and benefits

    Paloniitty, M., Karvonen, M., Linjama, M. & Tiainen, T., 2012, DFP 12, Proceedings of the fifth workshop on digital fluid power, October 24-25, 2012, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). Tampere: Tampere University of Technology. Department of Intellidgent Hydraulics and Automation, p. 27-42 (Workshop on digital fluid power).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  109. Published

    Fundamentals of Digital Microhydraulic

    Linjama, M., 2012, Proceedings of the 8th International Fluid Power Conference, Dresden, March 26-28, 2012. Dresden: Technische Universität Dresden, Institute of Fluid Power, p. 385-396 (International Fluid Power Conference; vol. 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  110. Published

    Implementation of a digital hydraulic valve system with Bosch Rexroth sec valves

    Ketonen, M., 2012, DFP 12, Proceedings of the fifth workshop on digital fluid power, October 24-25, 2012, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). Tampere: Tampere University of Technology. Department of Intelligent Hydraulics and Automation, p. 161-174 (Workshop on digital fluid power).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  111. Published

    Simulations with fault-tolerant controller software of a digital valve

    Huova, M., Ketonen, M., Alexeev, P., Boström, P., Linjama, M., Walden, M. & Sere, K., 2012, Proceedings of the fifth workshop on digital fluid power, October 24-25, 2012, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). Tampere: Tampere University of Technology. Department of Intelligent Hydraulics and Automation, p. 223-242 (Digital fluid power).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  112. Published

    Unified Framework for Rapid Prototyping of Linux based Real-Time Controllers with Matlab and Simulink

    Oftadeh, R., Aref, M. M., Ghabcheloo, R. & Mattila, J., 2012, IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM 2012, Ambassador Hotel, July 11-14, Kaohsiung, Taiwan. Piscataway, NJ: Institute of Electrical and Electronics Engineers IEEE, p. 274 - 279 (IEEE/ASME International Conference on Advanced Intelligent Mechatronics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  113. Published

    Effect of oil viscosity on filter performance in lubrication oil system

    Heiskanen, V., Mäkelä, T., Kapanen, P. & Rinkinen, J., 2012, Proceedings of the 11th World Filtration Congress & Exhibition, WFC11, April 16-20, 2012, Graz, Austria. Vienna, Austria: Gesellschaft Österreichischer Chemiker GÖCH, p. 1-15 15 p. (World Filtration Congress).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Previous 1 2 3 4 Next

ID: 21447