Tampere University of Technology

TUTCRIS Research Portal

Department of Intelligent Hydraulics and Automation

Research unit: Department

  1. A4 Article in a conference publication
  2. Published

    Fundamentals of Digital Microhydraulic

    Linjama, M., 2012, Proceedings of the 8th International Fluid Power Conference, Dresden, March 26-28, 2012. Dresden: Technische Universität Dresden, Institute of Fluid Power, p. 385-396 (International Fluid Power Conference; vol. 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  3. Published

    Pallet detection and tracking: position based visual servoing

    Ghabcheloo, R., 2012, Proceedings of the 6th GIM Scientific Workshop, November 7-8, 2012, Tampere, Finland. Huhtala, K. & Uusi-Heikkilä, J. (eds.). Tampere: Tampere University of Technology. Department of Intelligent Hydraulics and Automation, p. 117-123 (GIM Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  4. Published

    Simulation and experimental results of PWM control for Digiltalhydraulics

    Plöckinger, A., Huova, M. & Scheidl, R., 2012, DFP 12, Proceedings of the fifth workshop on digital fluid power, October 24-25, 2012, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). Tampere: Tampere University of Technology. Department of Intelligent Hydraulics and Automation, p. 133-152 (Workshop on digital fluid power).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  5. Published

    An Efficient Heuristic Estimate for Non-holonomic Motion Planning

    Choi, J-W., 2012, The 4th Workshop on Planning, Perception and Navigation for Intelligent Vehicles, October 7th, 2012 Vilamoura, Algarve, Portugal. p. 1-6 6 p. (Workshop on Planning, Perception and Navigation for Intelligent Vehicles).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  6. Published

    Energy Saving with Pump Control in Working Hydraulics

    Tikkanen, R., Ahola, V. & Uusi-Heikkilä, J., 2012, GIM - Generic Intelligent Machines, Proceedings of the 6th GIM Scientific Workshop, November 7-8, 2012, Tampere, Finland. Huhtala, K. & Uusi-Heikkilä, J. (eds.). Tampere: Tampere University of Technology. Department of Intelligent Hydraulics and Automation, p. 77-81 (GIM Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  7. Published

    Recent results in energy efficient digital hydraulic valve control

    Huova, M., 2012, Proceedings of the 6th GIM Scientific Workshop, November 7-8, 2012, Tampere, Finland. Huhtala, K. & Uusi-Heikkilä, J. (eds.). Tampere: Tampere University of Technology. Department of Intelligent Hydraulics and Automation, p. 89-94 (GIM Scientific Workshop; vol. 6).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  8. Published

    Improving energy efficiency and productivity of existing hydraulic systems by retrofittable digital hydraulics

    Ketonen, M., 2012, GIM - Generic Intelligent Machines, Proceedings of the 6th GIM Scientific Workshop, November 7-8, 2012, Tampere, Finland. Huhtala, K. & Uusi-Heikkilä, J. (eds.). Tampere: Tampere University of Technology. Department of Intelligent Hydraulics and Automation, p. 63-66 (GIM Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  9. Published

    Energy efficient digital hydraulic valve control utilizing pressurized tank line

    Huova, M. & Linjama, M., 2012, Proceedings of the 8th International Fluid Power Conference Dresden, March 26-28, 2012. Dresden: Technische Universutät Dresden, Dresdner Verein zur Förderung der Fluidtechnik, p. 111-122 12 p. (International Fluid Power Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  10. Published

    Autonomous fleet management utilizing OpenSplice DDS

    Rasi, T., 2011, Proceedings of the 5th GIM Scientific Workshop at Aalto University School of Electrical Engineering 29.-30.11.2011. Espoo: Aalto University, p. 88-102 15 p. (GIM Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  11. Published

    Fault Tolerance with digital Hydraulic Valve System

    Siivonen, L., Linjama, M. & Vilenius, M., 2011, The Eight International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 20-22 June 2011, Cardiff, Wales. Northamption: British Institute of Non-destructive Testing, p. 1250-1262 (International Conference on Condition Monitoring and Machinery Failure Prevention Technologies; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  12. Published

    Engine gas exchange controlled by digital hydraulics

    Herranen, M., Siivonen, L. & Huhtala, K., 2011, Proceedings of the 2nd International Conference on Measurement and Control Engineering, ICMCE 2011, October 21-22, 2011, Puerto Rico, USA. New York, NY: ASME Press, p. 1-7 7 p. (International Conference on Measurement and Control Engineering ICMCE; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  13. Published

    Hydraulic hybrids

    Linjama, M., 2011, GIM - Generic Intelligent Machines, The 4th GIM Scientific Workshop, January 18-19, 2011, Tampere University of Technology, Tampere, Finland. Tampere: Tampere University of Technology, p. 1-1 1 p. (GIM Scientific Workshop; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  14. Published

    Dependable Control Systems Design and Evaluation

    Alho, P. & Mattila, J., 2011, Conference on Systems Engineering Research (CSER) 2011 Redondo Beach, California, USA, April 15-16, 2011.. Redondo Beach, CA: CSER 2011, (Conference on Systems Engineering Research CSER).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  15. Published

    Simulation study - improving efficiency in mobile boom by using digital hydraulic power management system

    Karvonen, M., Heikkilä, M., Huova, M., Linjama, M. & Huhtala, K., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Sairala, H. & Koskinen, K. T. (eds.). Tampere: Scandinavian International Conference on Fluid Power, p. 355-368 (Scandinavian International Conference on Fluid Power SICFP; vol. 12, no. 3).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  16. Published

    Comparison between an aircraft speed brake actuator high order linear model and a semi-empirical non-linear model in real time simulation

    Hietala, J-P., Aaltonen, J., Koskinen, K. T. & Vilenius, M., 2011, AST 2011, 3rd International Workshop on Aircraft System Technologies, March 31 - April 1, 2011, Hamburg, Germany. Hamburg: Hamburg University of Technology, p. 65-71 (International Workshop on Aircraft System Technologies AST; vol. 3).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  17. Published

    Detecting and eliminating the measurement error caused by free air in aircraft hydraulic system on-line particle counting

    Aaltonen, J. & Koskinen, K. T., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Tampere: Scandinavian International Conference on Fluid Power, p. 229-240 (Scandinavian International Conference on Fluid Power SICFP; vol. 12, no. 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  18. Published

    Energy efficient digital hydraulic solutions for mobile booms

    Karvonen, M., 2011, GIM - Generic Intelligent Machines, The 4th GIM Scientific Workshop, January 18-19, 2011, Tampere University of Technology, Tampere, Finland. Tampere: Tampere University of Technology, p. 1-4 4 p. (GIM Scientific Workshop; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  19. Published

    Status of DTP2 - Test Facility for ITER Divertor Maintenance

    Salminen, K., Siuko, M., Karjalainen, J., Sibois, R. & Mattila, J., 2011, European Nuclear Young Generation Forum, ENYGF 2011, 17.5.-22.5.2011, Praha. Prague: ENYGF, p. 1-6 6 p. (European Nuclear Young Generation Forum ENYGF).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  20. Published

    A reduced-order unscented kalman filter independent of loading conditions for leakage fault detection and isolation in hydraulic systems

    Nurmi, J. & Mattila, J., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Sairala, H. & Koskinen, K. T. (eds.). Tampere: Scandinavian International Conference on Fluid Power, p. 57-74 (Scandinavian International Conference on Fluid Power SICFP; vol. 12, no. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  21. Published

    Self contained hydraulic module for cylinder driven applications

    Westerlund, S., Mäkinen, E. & Sinivaara, M., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Sairala, H. & Koskinen, K. T. (eds.). Tampere: Scandinavian International Conference on Fluid Power, p. 291-300 (Scandinavian International Conference on Fluid Power SICFP; vol. 12, no. 3).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Previous 1 2 3 4 5 6 7 8 ...17 Next

ID: 21447