Tampere University of Technology

TUTCRIS Research Portal

Department of Intelligent Hydraulics and Automation

Research unit: Department

  1. I2 ICT software
  2. Published

    Puuvirta-virtuaalinen ja simuloitu oppimisympäristö

    Kortemaa, A., Moisio, M., Punki, J., Palonen, T., Ranta, P., Leino, T., Alarotu, V., Koskinen, K. T. & Tohu, J., 2011

    Research output: Artistic and non-textual formSoftwareScientific

  3. Published

    Virtuaalinen konelaboratorio työkonejärjestelmien opetukseen: Lihaako -projekti. Smart Simulators -tutkimusryhmä

    Mäkelä, T., Nurmi, J., Punki, J., Ranta, P., Tebest, T., Leino, T., Palonen, T., Helminen, M., Markkula, M. & Koskinen, K. T., 2010

    Research output: Artistic and non-textual formSoftwareScientific

  4. Published

    Metviro

    Kortemaa, A., Mäkelä, T., Punki, J., Ranta, P., Palonen, T., Leino, T. & Koskinen, K. T., 2009

    Research output: Artistic and non-textual formSoftwareScientific

  5. H1 Granted patent
  6. Published

    Detecting of faults in a valve system and a fault tolerant control

    Siivonen, L. & Linjama, M., 2012, Patent No. Pat. US 8215227 B2, Priority date 10 Jul 2012, Priority No. (21) 11/991559;(30) FI 20055479

    Research output: PatentScientific

  7. Published

    Laitteisto, ohjauspiiri ja menetelmä paineen ja tilavuusvirran tuottamiseksi

    Linjama, M., Tammisto, J., Huhtala, K. & Vilenius, M., 2010, Patent No. Pat. FI 121090 B, Priority date 30 Jun 2010, Priority No. (21) FI 20085242

    Research output: PatentScientific

  8. G5 Doctoral dissertation (article)
  9. Published

    High-Pressure Properties of Hydraulic Fluid Dynamics and Second Order Polynomial Prediction Method

    Karjalainen, J-P., 2011, Tampere: Tampere University of Technology. 83 p. (Tampere University of Technology. Publication; vol. 983)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  10. Published

    Model-based design of power-split drivelines

    Erkkilä, M., 2009, Tampere: Tampere University of Technology. 102 p. (Tampereen teknillinen yliopisto. Julkaisu; vol. 835)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  11. Published

    Minimization of state transition uncertainty in the digital valve system

    Laamanen, A., 2009, Tampere: Tampere University of Technology. 111 p. (Tampereen teknillinen yliopisto. Julkaisu; vol. 809)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  12. Published

    Life in the water hydraulics system

    Riipinen, H., 2008, Tampere: Tampere University of Technology. (Tampereen teknillinen yliopisto. Julkaisu; vol. 716)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  13. Published

    On the flow and cavitation characteristics of water hydraulic seat valve structures

    Leino, T., 2008, Tampere: Tampere University of Technology. (Tampereen teknillinen yliopisto. Julkaisu; vol. 722)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  14. G4 Doctoral dissertation (monograph)
  15. Published

    Development of Remote Handling Pipe Jointing Tools for ITER

    Shuff, R. E., 30 Mar 2012, Tampere University of Technology. 148 p. (Tampere University of Technology. Publication; vol. 1026)

    Research output: Book/ReportDoctoral thesisMonograph

  16. Published

    Analysis of Slipper Structures in Water Hydraulic Axial Piston Pumps

    Rokala, M., 2012, Tampere: Tampere University of Technology. (Tampereen teknillinen yliopisto, Julkaisu; no. 1055)

    Research output: Book/ReportDoctoral thesisMonograph

  17. Published

    Modelling and Robust Control of Hydraulic Manipulators

    Zhai, L., 2012, Tampere: Tampere University of Technology. 98 p. (Tampere University of Technology. Publication; no. 1069)

    Research output: Book/ReportDoctoral thesisMonograph

  18. Published

    Impedance Control of Redundant Manipulators

    Muhammad, A., 4 Nov 2011, Tampere University of Technology. 169 p. (Tampere University of Technology. Publication; vol. 986)

    Research output: Book/ReportDoctoral thesisMonograph

  19. Published

    Feature Extraction and Self-Organizing Maps in Condition Monitoring of Hydraulic Systems

    Krogerus, T., 28 Jan 2011, Tampere: Tampere University of Technology. 126 p. (Tampere University of Technology. Publication; vol. 949)

    Research output: Book/ReportDoctoral thesisMonograph

  20. Published

    A Case Study on Effects of Remote Control and Control System Distribution in Hydraulic Mobile Machines

    Uusisalo, J., 2011, Tampere: Tampere University of Technology. 111 p. (Tampere University of Technology. Publication; vol. 960)

    Research output: Book/ReportDoctoral thesisMonograph

  21. Published

    A new approach for numerical simulation of fluid power circuits using Rosenbrock methods

    Esque, S., 28 Nov 2008, Tampere: Tampere University of Technology. 125 p. (Tampere University of Technology. Publication; vol. 763)

    Research output: Book/ReportDoctoral thesisMonograph

  22. Published

    Experimental and numerical analysis of the hydraulic circuit of a high pressure common rail diesel fuel injection system

    Beierer, P., 21 Dec 2007, Tampere: Tampere University of Technology. 198 p. (Tampere University of Technology. Publication; vol. 715)

    Research output: Book/ReportDoctoral thesisMonograph

  23. D5 Text book, professional manual or guide or a dictionary
  24. Published

    Koneenosien suunnittelu

    Airila, M., Ekman, K., Hautala, P., Kivioja, S., Kleimola, M., Martikka, H., Miettinen, J., Niemi, E., Ranta, A., Rinkinen, J., Salonen, P., Verho, A., Vilenius, M. & Välimaa, V., 2010, Unknown Publisher. 796 p.

    Research output: Book/ReportBookProfessional

  25. D4 Published development or research report or study
  26. Published

    2008-2010 Host Activities Related to DTP2 Test Facility Operation and Upgrade Preparation

    Siuko, M., Järvenpää, J. & Mattila, J., 2011, Valtion teknillinen tutkimuslaitos. 11 p. (VTT Publications; vol. 764)

    Research output: Book/ReportCommissioned reportProfessional

  27. Published

    Divertor RH design updates and DTP2 Phase 2 testing

    Siuko, M., Järvenpää, J. & Mattila, J., 2011, Espoo: VTT. 6 p. (VTT Publications; vol. 764)

    Research output: Book/ReportCommissioned reportProfessional

  28. Published

    2008-2009 Host Activities Related to DTP2 Test Facility Operation and Upgrade Preparation

    Siuko, M., Järvenpää, J. & Mattila, J., 2010, VTT. 12 p. (VTT Publications; vol. 738)

    Research output: Book/ReportCommissioned reportProfessional

  29. Published

    Implementation of a DTP2 safety system for testing, and final CMM/SCEE integration and commissioning

    Mattila, J. & Järvenpää, J., 2009, VTT. 3 p. (VTT Publications; vol. 709)

    Research output: Book/ReportCommissioned reportProfessional

  30. Published

    2008-2009 Host Activities Related to DTP2 Test Facility Operation and Upgrade Preparation

    Siuko, M., Järvenpää, J. & Mattila, J., 2009, VTT. 10 p. (VTT Publications; vol. 709)

    Research output: Book/ReportCommissioned reportProfessional

  31. Published

    Host activities in connection with the DTP2 test facility

    Järvenpää, J., Timperi, A., Tuominen, R. & Mattila, J., 2008, Espoo: VTT. 5 p. (VTT Publications; vol. 678)

    Research output: Book/ReportCommissioned reportProfessional

  32. Published

    EFDA quality assurance exercise

    Mattila, J. & Järvenpää, J., 2008, Espoo: VTT. 2 p. (VTT Publications; vol. 678)

    Research output: Book/ReportCommissioned reportProfessional

  33. Published

    Development of DTP2 subsystems and tooling in support of remote handling trials

    Mattila, J., 2008, Espoo: VTT. 7 p. (VTT Publications; vol. 678)

    Research output: Book/ReportCommissioned reportProfessional

  34. Published

    Implementation of a DTP2 safety system for testing, and final CMM/SCEE integration and commissioning

    Mattila, J. & Järvenpää, J., 2008, Espoo: VTT. 3 p. (VTT Publications; vol. 678)

    Research output: Book/ReportCommissioned reportProfessional

  35. Published

    Virtual engineering and remote operation in design, training and completon of demanding maintenance work tasks in challenging industrial plants (VIRVO) - MASIT15

    Leino, S-P., Helin, K., Lind, S., Viitaniemi, H., Multanen, P., Mäkiranta, A., Lahtinen, J., Nuutinen, P., Heikkilä, J-M. & Martikainen, T., 2008, Tekes. 10 p.

    Research output: Book/ReportCommissioned reportProfessional

  36. Published

    Software development and modelling of the CMM system

    Mattila, J., 2008, Espoo: VTT. 2 p. (VTT Publications; vol. 678)

    Research output: Book/ReportCommissioned reportProfessional

  37. Published

    Automatic testing in the integration phase of mobile work machine (TINAT) - MASIT31

    Multanen, P., Hyvönen, M., Ellman, A., Rantala, S. & Alanen, J., 2008, Tekes.

    Research output: Book/ReportCommissioned reportProfessional

  38. D3 Professional conference proceedings
  39. Published

    IHA:n KompuNW-testipenkillä tehtyjä mittauksia

    Pekkonen, J., Elo, L., Kuosku, M. & Rinkinen, J., 2012, KompuNW -verkostoseminaari TTY:ssa 9.10.2012. Tampere: Tampere University of Technology, IHA - Department of Intelligent Hydraulics and Automation, p. 1-16 16 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  40. Published

    Mittaustuloksia kaupallisilla puhtaustestikaapeilla

    Kuosku, M., Pekkonen, J. & Rinkinen, J., 2012, KompuNW -verkostoseminaari TTY:ssa 9.10.2012. Tampere: Tampere University of Technology, IHA - Department of Intelligent Hydraulics and Automation, p. 1-15 15 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  41. Published

    Kokemuksia inline- ja online-mittauksista - ISO/SAE -standardit

    Elo, L., Pekkonen, J. & Rinkinen, J., 2012, KompuNW -verkostoseminaari TTY:ssa 9.10.2012. Tampere: Tampere University of Technology, IHA - Department of Intelligent Hydraulics and Automation, p. 1-13 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  42. Published

    Voiteluöljyn online- ja inline-kunnonvalvonta, "Uusia tapoja ja menetelmiä öljyn kunnon ja vaihtovälin määrittelemiseksi"

    Elo, L. & Rinkinen, J., 2012, Voiteluaineanalyysit mittaavan kunnossapidon työkaluna, AEL -seminaari 29.8.2012. Helsinki: Elinkeinoelämän koulutuspalvelut, p. 1-14 14 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  43. Published

    Komponentin ja järjestelmän elinkaaren mallintaminen analyyttisillä menetelmillä

    Aaltonen, J., 2012, Hydraulijärjestelmien modernisointi, 21.-22.3.2012, Suomen ilmailumuseo, Vantaa, Kunnossapitoyhdistys. Helsinki: Kunnossapitoyhdistys ProMaint, p. 1-9 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  44. D1 Article in a trade journal
  45. Published

    Hydrauliikan aika ei ole ohi - The time of hydraulics is not over

    Linjama, M., 2012, In : Fluid Finland. 11, 2, p. 10-12

    Research output: Contribution to journalArticleProfessional

  46. Published

    Digitaalinen Hydraulisäätö - tulevaisuuden tekniikkaa?

    Siivonen, L., 2012, In : Promaint. 26, 7, p. 41-43

    Research output: Contribution to journalArticleProfessional

  47. Published

    Elintarviketeollisuuden koneautomaation kehitys kaipaa tiivistämistä

    Sairiala, H. & Koskinen, K. T., 2012, In : Kehittyvä elintarvike. 23, 4, p. 12-13

    Research output: Contribution to journalArticleProfessional

  48. Published

    IHA Department of Intelligent Hydraulics and Automation

    Huhtala, K. & Aunola, V., 2011, In : Fluid Finland. 10, 1, p. 10-11

    Research output: Contribution to journalArticleProfessional

  49. Published

    Hiukkasen puhtaammaksi -laboratorio hydraulikomponenttien puhtaustutkimuksiin

    Kuosku, M. & Rinkinen, J., 2011, In : Promaint. 25, 5, p. 42-45

    Research output: Contribution to journalArticleProfessional

  50. Published

    Recent advances in standardisation and education of fluid power in Finland

    Rinkinen, J., Lahtinen, J. & Virta, S., 2011, In : Maintworld, Maintenance & Asset Management. 3, 2, p. 14-18

    Research output: Contribution to journalArticleProfessional

  51. Published

    Hydrauliikan vianetsintä -säästöä systemaattisella toiminnalla

    Törmänen, R., Räihä, K. & Rinkinen, J., 2011, In : Promaint. 25, 5, p. 50-53 4 p.

    Research output: Contribution to journalArticleProfessional

  52. Published

    Versatile maintenance solutions in oil related systems

    Rinkinen, J., 2011, In : Condition Monitor. 296, p. 5-12

    Research output: Contribution to journalArticleProfessional

  53. Published

    Experiences of monitoring the condition of military aircraft hydraulic systems

    Virta, P., Aaltonen, J., Koskinen, K. T. & Vilenius, M., 2010, In : Condition Monitor. 280, p. 9-14

    Research output: Contribution to journalArticleProfessional

  54. Published

    Digitaalihydrauliikka tulee!

    Linjama, M., 2010, In : Metsäalan ammattilehti. 5, p. 88-89

    Research output: Contribution to journalArticleProfessional

  55. Published

    Hydraulikomponenttien ja -järjestelmien puhtausvalvontastandardien nykytila

    Rinkinen, J., 2009, In : Fluid Finland. 3-4, p. 32-38

    Research output: Contribution to journalArticleProfessional

  56. Published

    Digitaalisen mikrohydrauliikan sovellussatoa

    Linjama, M., 2009, In : Fluid Finland. 2/2009, p. 30-31

    Research output: Contribution to journalArticleProfessional

  57. Published

    Väitöskirjan esittely. Nopeutta virtuaalisuunnitteluun uudella integrointialgoritmilla. Rosenbrockin menetelmä on uusi hydraulipiirien numeerisen simuloinnin lähestymistapa

    Esque, S., 2009, In : Fluid Finland. 1/2009, p. 8-11

    Research output: Contribution to journalArticleProfessional

  58. Published

    IHA digitaalihydrauliikalla maailman ykköseksi

    Vilenius, M., 2009, In : Fluid Finland. p. s. 5

    Research output: Contribution to journalArticleProfessional

Previous 1 2 3 4 5 6 7 Next

ID: 21447