Tampere University of Technology

TUTCRIS Research Portal

Department of Intelligent Hydraulics and Automation

Research unit: Department

  1. A4 Article in a conference publication
  2. Published

    Fault Tolerance with digital Hydraulic Valve System

    Siivonen, L., Linjama, M. & Vilenius, M., 2011, The Eight International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 20-22 June 2011, Cardiff, Wales. Northamption: British Institute of Non-destructive Testing, p. 1250-1262 (International Conference on Condition Monitoring and Machinery Failure Prevention Technologies; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  3. Published

    Model-based pressure control with digital valve system

    Linjama, M. & Lahtinen, J., 2011, The Fourth Workshop on Digital Fluid Power, 21st-22nd November, 2011, Linz, Austria. Linz: DFP-Workshops, p. 26-38 (Workshop on Digital Fluid Power; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  4. Published

    Research of optimizing the prime mover and hydraulics of mobile machines

    Backas, J., 2011, GIM - Generic Intelligent Machines, The 4th GIM Scientific Workshop, January 18-19, 2011, Tampere University of Technology, Tampere, Finland. Tampere: Tampere University of Technology, p. 1-5 5 p. (GIM Scientific Workshop; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  5. Published

    GIMsim: Hardware in the loop simulator for autonomous hydraulic mobile machines

    Ghabcheloo, R., 2011, GIM - Generic Intelligent Machines, The 4th GIM Scientific Workshop, January 18-19, 2011, Tampere University of Technology, Tampere, Finland. Tampere: Tampere University of Technology, p. 1-13 13 p. (GIM Scientific Workshop; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  6. Published

    Service-oriented ad-hoc method for unforeseen scenarios

    Hahto, A., Rasi, T., Kivelä, T., Honkakorpi, J. & Mattila, J., 2011, Fifth International Workshop on Robotics for risky interventions and Environmental Surveillance-Maintenance 5th IARP RISE’2011, 20-22 June, C-ELROB 2011, 21-24 June, Brussels – Leuven. Leuven: IARP, p. 1-6 6 p. (International Workshop on Robotics for Risky Interventions and Environmental Surveillance-Maintenance IARP RISE, C-ELROB).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  7. Published

    Development process of control system

    Ahopelto, M., 2011, GIM - Generic Intelligent Machines, The 4th GIM Scientific Workshop, January 18-19, 2011, Tampere University of Technology, Tampere, Finland. Tampere: Tampere University of Technology, p. 1-7 7 p. (GIM Scientific Workshop; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  8. Published

    Comparison between an aircraft speed brake actuator high order linear model and a semi-empirical non-linear model in real time simulation

    Hietala, J-P., Aaltonen, J., Koskinen, K. T. & Vilenius, M., 2011, AST 2011, 3rd International Workshop on Aircraft System Technologies, March 31 - April 1, 2011, Hamburg, Germany. Hamburg: Hamburg University of Technology, p. 65-71 (International Workshop on Aircraft System Technologies AST; vol. 3).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  9. Published

    Virtual machine laboratory based on m1-technology

    Helminen, M., Palonen, T., Rokala, M., Ranta, P., Mäkelä, T. & Koskinen, K. T., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Tampere: Scandinavian International Conference on Fluid Power, p. 321-334 (Scandinavian International Conference on Fluid Power SICFP; vol. 12).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  10. Published

    Displacement controlled machines

    Ahola, V., 2011, Proceedings of the 5th GIM Scientific Workshop at Aalto University School of Electrical Engineering 29.-30.11.2011. Espoo: Aalto University, p. 124-131 (GIM Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  11. Published

    Self contained hydraulic module for cylinder driven applications

    Westerlund, S., Mäkinen, E. & Sinivaara, M., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Sairala, H. & Koskinen, K. T. (eds.). Tampere: Scandinavian International Conference on Fluid Power, p. 291-300 (Scandinavian International Conference on Fluid Power SICFP; vol. 12, no. 3).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  12. Published

    A reduced-order unscented kalman filter independent of loading conditions for leakage fault detection and isolation in hydraulic systems

    Nurmi, J. & Mattila, J., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Sairala, H. & Koskinen, K. T. (eds.). Tampere: Scandinavian International Conference on Fluid Power, p. 57-74 (Scandinavian International Conference on Fluid Power SICFP; vol. 12, no. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  13. Published

    Analysis of effect of remote control on usability of hydraulic mobile machines

    Uusisalo, J. & Huhtala, K., 2011, Proceedings of the 8th JFPS International Symposium on Fluid Power, Okinawa 2011, October 25-28, 2011, Okinawa, Japan. Okinawa: JFPS international Symposium on Fluid Power, p. 688-695 (International Symposium on Fluid Power JFPS).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  14. Published

    Remote support for maintenance tasks by the use of Augmented Reality: the ManuVAR project

    Azpiazu, J., Siltanen, S., Multanen, P., Mäkiranta, A., Barrena, N., Diez, A., Agirre, J. & Smith, T., 2011, Proceedings of the 9th Congress on Virtual Reality Applications, CARVI 2011. San Sebastian: Tecnalia, p. 1-6 6 p. (Congress on Virtual Reality Applications CARVI; vol. 9).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  15. Published

    Status of DTP2 - Test Facility for ITER Divertor Maintenance

    Salminen, K., Siuko, M., Karjalainen, J., Sibois, R. & Mattila, J., 2011, European Nuclear Young Generation Forum, ENYGF 2011, 17.5.-22.5.2011, Praha. Prague: ENYGF, p. 1-6 6 p. (European Nuclear Young Generation Forum ENYGF).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  16. Published

    Testing of data analysis process in hydraulic forklift

    Krogerus, T. & Koskinen, K. T., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Sairala, H. & Koskinen, K. T. (eds.). Tampere: Scandinavian International Conference on Fluid Power, p. 105-234 130 p. (Scandinavian International Conference on Fluid Power SICFP; vol. 12, no. 3).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  17. Published

    Dependable Control Systems Design and Evaluation

    Alho, P. & Mattila, J., 2011, Conference on Systems Engineering Research (CSER) 2011 Redondo Beach, California, USA, April 15-16, 2011.. Redondo Beach, CA: CSER 2011, (Conference on Systems Engineering Research CSER).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  18. Published

    Recent advancements in miniature valve development

    Karvonen, M., Ketonen, M., Linjama, M. & Puumala, V., 2011, The Fourth Workshop on Digital Fluid Power, 21st-22nd November, 2011, Linz, Austria. Linz: DFP-Workshops, p. 90-103 14 p. (Workshop on Digital Fluid Power; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  19. Published

    Adaptive dead zone compensation of proportional mobile valve

    Kivelä, T. & Mattila, J., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Sairala, H. & Koskinen, K. T. (eds.). Tampere: Scandinavian International Conference on Fluid Power, p. 411-422 (Scandinavian International Conference on Fluid Power SICFP; vol. 12, no. 3).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  20. Published

    Autonomous fleet management utilizing OpenSplice DDS

    Rasi, T., 2011, Proceedings of the 5th GIM Scientific Workshop at Aalto University School of Electrical Engineering 29.-30.11.2011. Espoo: Aalto University, p. 88-102 15 p. (GIM Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  21. Published

    Utilization of R&D Simulators to Support the Maintenance of Mobile Work Machines

    Multanen, P. & Hyvönen, M., 2011, The Eight International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 20-22 June 2011, Cardiff, Wales. Northamption: British Institute of Non-destructive Testing, p. 1263-1274 (International Conference on Condition Monitoring and Machinery Failure Prevention Technologies; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  22. Published

    A Potential Field and Bug Compound Navigation Algorithm for Nonholonomic Wheeled Robots

    Choi, J., 2011, Proceedings of the 5th GIM Scientific Workshop at Aalto University School of Electrical Engineering 29.-30.11.2011. Espoo: Aalto University, p. 62-70 (GIM Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  23. Published

    On-board system integration of a mobile machine with automated functions operating in a multi-machine environment

    Karhu, O., 2011, GIM - Generic Intelligent Machines, The 4th GIM Scientific Workshop, January 18-19, 2011, Tampere University of Technology, Tampere, Finland. Tampere: Tampere University of Technology, (GIM Scientific Workshop; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  24. Published

    Experimental evaluation of a piston-type digital pump-motor-transformer with two independent outlets

    Heikkilä, M., Tammisto, J., Huova, M., Huhtala, K. & Linjama, M., 2010, Fluid Power and Motion Control (FPMC 2010), 15-17 September 2010, University of Bath, UK. Johnston, D. N. & Plummer, A. (eds.). p. 83-97

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  25. Published

    Optimization and energy consumption of electro-hydraulic valve actuation system through valve event timing range

    Herranen, M., Huhtala, K. & Vilenius, M., 2010, Fluid Power and Motion Control (FPMC 2010), 15-17 September 2010, University of Bath, UK. Johnston, D. N. & Plummer, A. (eds.). p. 433-445

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  26. Published

    Driving feel generation of the mobile machine simulator with the water hydraulic 6-DOF motion platform

    Rokala, M., Sairiala, H. & Koskinen, K. T., 2010, 7th International Fluid Power Conference (7th IFK), 22-24 March 2010, Aachen, Germany. p. 1-12 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  27. Published

    Characteristics of digital hydraulic pressure reducing valve

    Lähteenmäki, T., Ijas, M. & Mäkinen, E., 2010, Fluid Power and Motion Control (FPMC 2010), 15-17 September 2010, University of Bath, UK. Johnston, D. N. & Plummer, A. R. (eds.). p. 69-82

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  28. Published

    Multiple marine vehicle deconflicted path planning with currents and communication constraints

    Häusler, A., Ghabcheloo, R., Pascoal, M. A. & Aguiar, A. P., 2010, The 7th IFAC Symposium on Intelligent Autonomous Vehicles IAV'10, Lecce, Italy, September 2010. p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  29. Published

    Collaboration between design and production by exploiting VR/AR and PLM - case Metso Minerals

    Leino, S-P., Vehviläinen, M., Kiviranta, S., Mäkiranta, A., Nuutinen, P., Hokkanen, I., Multanen, P., Rantanen, P., Heikkilä, J. & Martikainen, T., 2010, Proceedings of the 3rd International Conference on Applied Human Factors and Ergonomics (AHFE), 17-20 July 2010, Miami, Florida, USA. Karwowski, W. & Salvendy, G. (eds.). p. 1-11 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  30. Published

    Modelling and robust control of a hydraulic servo system

    Zhai, L., Mattila, J. & Virvalo, T., 2010, Proceedings of the Post-Graduate Workshop on Intelligent Machines and Transport Systems, May 3-7, 2010, CERN, Switzerland. Karvinen, T. & Keskinen, E. (eds.). p. 156-167

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  31. Published

    Measured characteristics of an in-line pump with independently controlled pistons

    Tammisto, J., Huova, M., Heikkilä, M., Linjama, M. & Huhtala, K., 2010, 7th International Fluid Power Conference (7th IFK), 22-24 March 2010, Aachen, Germany. p. 1-12 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  32. Published

    Valve train with learning control features

    Herranen, M., Virvalo, T., Huhtala, K., Glader, T. & Kallio, I., 2010, 26th CIMAC World Congress on Combustion Engine Technology for Ship Propulsion Power Generation Rail Traction. June, 14-17, 2010, Bergen, Norway. p. 1-10 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  33. Published

    Application of mems sensor fusion in hydraulic boom control

    Honkakorpi, J. & Mattila, J., 2010, Proceedings of the Post-Graduate Workshop on Intelligent Machines and Transport Systems, May 3-7, 2010, CERN, Switzerland. Karvinen, T. & Keskinen, E. (eds.). p. 1-11 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  34. Published

    Energy efficient control of multiactuator digital hydraulic mobile machine

    Huova, M., Karvonen, M., Ahola, V., Linjama, M. & Vilenius, M., 2010, 7th International Fluid Power Conference (7th IFK), 22-24 March 2010, Aachen, Germany. p. 1-12 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  35. Published

    A parameter study of a digital pump

    Jaurola, M. & Huhtala, K., 2010, Fluid Power and Motion Control (FPMC 2010), 15-17 September 2010, University of Bath, UK. Johnston, D. N. & Plummer, A. (eds.). p. 203-215

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  36. Published

    Impedance control of redundant manipulators

    Muhammad, A. & Vilenius, M., 2010, Proceedings of the 6th FPNI - PhD Symposium West Lafayette 2010, June 15-19 2010, Indiana, USA. Ivantysynova, M. (ed.). p. 153-163

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  37. Published

    Applying self-organizing maps to condition monitoring of hydraulic systems

    Krogerus, T., 2010, Proceedings of the 3rd GIM Scientific Workshop, February 17-18, 2010, Aalto University School of Science and Technology. Halme, A. & Pirttioja, T. (eds.). p. 1-10 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  38. Published

    Research platforms for future activities

    Huhtala, K., 2010, Proceedings of the 3rd GIM Scientific Workshop, February 17-18, 2010, Aalto University School of Science and Technology. Halme, A. & Pirttioja, T. (eds.). p. 1-16 16 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  39. Published

    Valve parameter study in case of digital pump

    Jaurola, M., 2010, Proceedings of the 3rd GIM Scientific Workshop, February 17-18, 2010, Aalto University School of Science and Technology. Halme, A. & Pirttioja, T. (eds.). Espoo, p. 1-13 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  40. Published

    Digital hydraulic power management system - towards lossless hydraulics

    Linjama, M. & Huhtala, K., 2010, Proceedings of the Third Workshop on Digital Fluid Power, October 13-14 2010, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). p. 5-22

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  41. Published

    New digital electrohydraulic valve package

    Uusitalo, J-P., Ahola, V., Söderlund, L. & Kettunen, L., 2010, Proceedings of the Third Workshop on Digital Fluid Power, October 13-14, 2010, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). p. 39-59

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  42. Published

    Digital hydraulics in workboat propulsion control

    Perukangas, M. & Mäkinen, E., 2010, Proceedings of the Third Workshop on Digital Fluid Power, October 13-14 2010, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). p. 153-166

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  43. Published

    Experimental study on control system distribution and effects of remote control in hydraulic mobile machines

    Uusisalo, J., 2010, Proceedings of the 3rd GIM Scientific Workshop, February 17-18, 2010, Aalto University School of Science and Technology. Halme, A. & Pirttioja, T. (eds.). p. 1-11 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  44. Published

    Experimental study on effects of remote control and control system distribution in hydraulic mobile machines

    Uusisalo, J. & Huhtala, K., 2010, Proceedings of the Post-Graduate Workshop on Intelligent Machines and Transport Systems, May 3-7, 2010, CERN, Switzerland. Karvinen, T. & Keskinen, E. (eds.). p. 1-11 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  45. Published

    Digital flow control unit for controlling amount of water used for binding dust

    Laamanen, A., Anttonen, P. & Linjama, M., 2010, Proceedings of the Third Workshop on Digital Fluid Power, October 13-14 2010, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). p. 119-128

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  46. Published

    Experimental evaluation of a digital hydraulic power management system

    Heikkilä, M., Tammisto, J., Huova, M., Huhtala, K. & Linjama, M., 2010, Proceedings of the Third Workshop on Digital Fluid Power, October 13-14 2010, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). p. 129-142

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  47. Published

    Comparison of slipper structures in water hydraulic axial piston pump

    Rokala, M. & Koskinen, K. T., 2010, 6th FPNI-PhD Symposium, June 15-19, 2010, West Lafayette, USA.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  48. Published

    Negative load sensing

    Erkkilä, M., Jalkanen, T., Lehto, E. & Virvalo, T., 2010, 7th International Fluid Power Conference (7th IFK), 22-24 March2010, Aachen, Germany. p. 1-12 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  49. Published

    Improving resolution of digital hydraulic valve system by utilizing fast switching valves

    Huova, M. & Plöckinger, A., 2010, Proceedings of the Third Workshop on Digital Fluid Power, October 13-14 2010, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). p. 79-92

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  50. Published

    A miniature needle valve

    Karvonen, M., Juhola, M., Ahola, V., Söderlund, L. & Linjama, M., 2010, Proceedings of the Third Workshop on Digital Fluid Power, October 13-14 2010, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). p. 61-78

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  51. Published

    Condition monitoring and in-line maintenance of oil in circulating lubrication system

    Rinkinen, J., 2010, Proceedings of the 3rd International Seminar Maintenance, Condition Monitoring and Diagnostics, September 29-30, 2010, Pohto, Oulu, Finland. Lahdelma, S. & Palokangas, K. (eds.). p. 136-151

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

ID: 21447