Tampere University of Technology

TUTCRIS Research Portal

Department of Intelligent Hydraulics and Automation

Research unit: Department

  1. A4 Article in a conference publication
  2. Published

    Improving energy efficiency and productivity of existing hydraulic systems by retrofittable digital hydraulics

    Ketonen, M., 2012, GIM - Generic Intelligent Machines, Proceedings of the 6th GIM Scientific Workshop, November 7-8, 2012, Tampere, Finland. Huhtala, K. & Uusi-Heikkilä, J. (eds.). Tampere: Tampere University of Technology. Department of Intelligent Hydraulics and Automation, p. 63-66 (GIM Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  3. Published

    Digital Hydraulic Cylinder Drive For Folding Cargo Hatches

    Westerlund, S. & Mäkinen, E., 2012, Proceedings of the 7th FPNI PhD Symposium on Fluid Power, University of Modena and Reggio Emilia, June 27-30, 2012, Reggio Emilia, Italy. Milani, M., Montorsi, L. & Paltrinieri, F. (eds.). Fluid Power Net International, p. 235-248 (Fluid Power Net International PhD Symposium; vol. 7).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  4. Published

    Semantic Top-Down Modeling of Mechatronics Systems for Sustainable Product Data and Lifecycle Management

    Nykänen, O., Koskinen, K. T., Ranta, P., Salonen, J., Rokala, M., Helminen, M., Nurmi, J., Sairiala, H., Alarotu, V., Aaltonen, J. & Pohjolainen, S., 2012, The 13th Mechatronics Forum International Conference. Proceedings Vol. 3/3. September 17-19 2012, Linz, Austria.. Scheidl, R. & Jacoby, B. (eds.). Linz, Austria: Austrian Center of Competence in Mechatronics (ACCM), p. 792-799 (Mechatronics Forum International Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  5. Published

    Augmented reality for operator assistance

    Kolu, A., 2012, GIM - Generic Intelligent Machines, Proceedings of the 6th GIM Scientific Workshop, November 7-8, 2012, Tampere, Finland. Huhtala, K. & Uusi-Heikkilä, J. (eds.). Tampere: Tampere University of Technology. Department of Intelligent Hydraulics and Automation, p. 9-13 (GIM Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  6. Published

    Modelling of flow characteristics of on/off valves

    Linjama, M., Huova, M. & Karvonen, M., 2012, DFP 12, Proceedings of the fifth workshop on digital fluid power, October 24-25, 2012, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). Tampere: Tampere University of Technology, Department of Intelligent Hydraulics and Automation, p. 209-222 (Workshop on digital fluid power).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  7. Published

    Recent results in energy efficient digital hydraulic valve control

    Huova, M., 2012, Proceedings of the 6th GIM Scientific Workshop, November 7-8, 2012, Tampere, Finland. Huhtala, K. & Uusi-Heikkilä, J. (eds.). Tampere: Tampere University of Technology. Department of Intelligent Hydraulics and Automation, p. 89-94 (GIM Scientific Workshop; vol. 6).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  8. Published

    Simulation and experimental results of PWM control for Digiltalhydraulics

    Plöckinger, A., Huova, M. & Scheidl, R., 2012, DFP 12, Proceedings of the fifth workshop on digital fluid power, October 24-25, 2012, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). Tampere: Tampere University of Technology. Department of Intelligent Hydraulics and Automation, p. 133-152 (Workshop on digital fluid power).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  9. Published

    Improving damping characteristics of displacement controlled digital hydraulic system

    Heikkilä, M. & Linjama, M., 2012, DFP 12, Proceedings of the fifth workshop on digital fluid power, October 24-25, 2012, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). Tampere: Tampere University of Technology. Department of Intellidgent Hydraulics and Automation, p. 75-88 (Workshop on digital fluid power).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  10. Published

    Energy efficient digital hydraulic valve control utilizing pressurized tank line

    Huova, M. & Linjama, M., 2012, Proceedings of the 8th International Fluid Power Conference Dresden, March 26-28, 2012. Dresden: Technische Universutät Dresden, Dresdner Verein zur Förderung der Fluidtechnik, p. 111-122 12 p. (International Fluid Power Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  11. Published

    From measurements data to information

    Krogerus, T., 2012, GIM - Generic Intelligent Machines, Proceedings of the 6th GIM Scientific Workshop , November 7-8, 2012, Tampere, Finland. Huhtala, K. & Uusi-Heikkilä, J. (eds.). Tampere: Tampere University of Technology. Department of Intelligent Hydraulics and Automation, p. 51-62 (GIM Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  12. Published

    A low resolution digital hydraulic control application

    Kukkonen, S. & Mäkinen, E., 2012, Proceedings of the 13th Mechatronics Forum International Conference, September 17-19, 2012, Johannes Kepler University Linz, Austria, Advances in Mechatronics. Scheidl, R. & Jakoby, B. (eds.). Linz: TRAUNER VERLAG, p. 8 p (Mechatronics Forum; vol. 1/3).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  13. Published

    Power Management of Mobile Machines with Multiple Consumers

    Ahopelto, M., 2012, GIM - Generic Intelligent Machines, Proceedings of the 6th GIM Scientific Workshop, November 7-8, 2012, Tampere, Finland. Huhtala, K. & Uusi-Heikkilä, J. (eds.). Tampere: Tampere University of Technology. Department of Intelligent Hydraulics and Automation, p. 31-37 (GIM Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  14. Published

    Digital Hydraulic Pressure Relief Function

    Ketonen, M., Huova, M., Heikkilä, M., Linjama, M., Boström, P. & Walden, M., 2012, Fluid Power and Motion Control, FPMC 2012, University of Bath, UK. Johnston, D. N. & Plummer, A. R. (eds.). Bath, United Kingdom: Centre for Power Transmission and Motion Control, University of Bath, ASME, p. 137-150 (Bath/ASME Symposium on Fluid Power and Motion Control).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  15. Published

    An Efficient Heuristic Estimate for Non-holonomic Motion Planning

    Choi, J-W., 2012, The 4th Workshop on Planning, Perception and Navigation for Intelligent Vehicles, October 7th, 2012 Vilamoura, Algarve, Portugal. p. 1-6 6 p. (Workshop on Planning, Perception and Navigation for Intelligent Vehicles).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  16. Published

    Pallet detection and tracking: position based visual servoing

    Ghabcheloo, R., 2012, Proceedings of the 6th GIM Scientific Workshop, November 7-8, 2012, Tampere, Finland. Huhtala, K. & Uusi-Heikkilä, J. (eds.). Tampere: Tampere University of Technology. Department of Intelligent Hydraulics and Automation, p. 117-123 (GIM Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  17. Published

    An Optimal Controller for Hydrostatic Drives

    Backas, J., 2012, GIM - Generic Intelligent Machines, Proceedings of the 6th GIM Scientific Workshop, November 7-8, 2012, Tampere, Finland. Huhtala, K. & Uusi-Heikkilä, J. (eds.). Tampere: Tampere University of Technology. Department of Intelligent Hydraulics and Automation, p. 83-88 (Generic Intelligent Machines Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  18. Published

    Coordinated Control of Hydraulic Mobile Manipulators

    Ghabcheloo, R. & Huhtala, K., 2012, The 2nd IFAC Workshop on Multivehicle Systems, MVS, 3-4 October 2012, Espoo, Finland. Halme, A. & Suomela, J. (eds.). Laxenburg: The International Federation of Automatic Control IFAC, p. 37-42 (IFAC Workshop on Multivehicle Systems; vol. 2, no. Part 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  19. Published

    Energy Saving with Pump Control in Working Hydraulics

    Tikkanen, R., Ahola, V. & Uusi-Heikkilä, J., 2012, GIM - Generic Intelligent Machines, Proceedings of the 6th GIM Scientific Workshop, November 7-8, 2012, Tampere, Finland. Huhtala, K. & Uusi-Heikkilä, J. (eds.). Tampere: Tampere University of Technology. Department of Intelligent Hydraulics and Automation, p. 77-81 (GIM Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  20. Published

    Power management in a mobile work machine: reduced diesel rpm for better energy efficiency

    Ahopelto, M., Backas, J. & Huhtala, K., 2012, Proceedings of the 7th FPNI PhD Symposium on Fluid Power, University of Modena and Reggio Emilia, June 27-30, 2012, Reggio Emilia, Italy. Milani, M., Montorsi, L. & Paltrinieri, F. (eds.). p. 133-148 (Fluid Power Net International PhD Symposium; vol. 7).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  21. Published

    Analysis of Adaptive/Learning Control Methods in Cyclic Hydraulic System

    Herranen, M., Enlund, J., Uusisalo, J. & Huhtala, K., 2012, Proceedings of the 8th International Fluid Power Conference, Dresden, March 26-28, 2012. Dresden: Technische Universität Dresden, Institute of Fluid Power, p. 399-410 (International Fluid Power Conference; vol. 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  22. Published

    IHA-machine: a future mobile machine

    Backas, J., Ahopelto, M., Huova, M., Vuohijoki, A., Karhu, O., Ghabcheloo, R. & Huhtala, K., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Tampere: Scandinavian International Conference on Fluid Power, p. 161-176 (Scandinavian International Conference on Fluid Power SICFP; vol. 12, no. 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  23. Published

    Aircraft Hydraulic System Fault Finding and Troubleshooting Using On-Line Particle Counters

    Aaltonen, J., Alarotu, V. & Koskinen, K. T., 2011, The Eight International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 20-22 June 2011, Cardiff, Wales. Northamption: British Institute of Non-destructive Testing, p. 1275-1282 (International Conference on Condition Monitoring and Machinery Failure Prevention Technologies; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  24. Published

    Recognition of Operating States of Mobile Machine

    Krogerus, T., 2011, Proceedings of the 5th GIM Scientific Workshop at Aalto University School of Electrical Engineering 29.-30.11.2011. Espoo: Aalto University, p. 70-80 (GIM Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  25. Published

    Modelling the efficiencies of hydraulic pumps with neural networks

    Backas, J. & Huhtala, K., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Sairala, H. & Koskinen, K. T. (eds.). Tampere: Scandinavian International Conference on Fluid Power, p. 11-24 (Scandinavian International Conference on Fluid Power SICFP; vol. 12, no. 3).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  26. Published

    Sensitivity analysis of data analysis process in hydraulic forklift

    Krogerus, T., Rokala, M. & Koskinen, K. T., 2011, Proceedings of the 8th JFPS International Symposium on Fluid Power, Okinawa 2011, October 25-28, 2011, Okinawa, Japan. Okinawa: JFPS international Symposium on Fluid Power, p. 571-578 (International Symposium on Fluid Power JFPS).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  27. Published

    Autonomous pallet picking of GIM machine

    Hyvönen, M., Ghabcheloo, R., Mantere, P., Kolu, A. & Huhtala, K., 2011, Proceedings of the 5th GIM Scientific Workshop at Aalto University School of Electrical Engineering 29.-30.11.2011. Espoo: Aalto University, p. 30-36 (GIM Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  28. Published

    Mems Sensor Module for Hydraulic Boom State Feeedback Control

    Honkakorpi, J., Vihonen, J. & Mattila, J., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Sairala, H. & Koskinen, K. T. (eds.). Tampere: Scandinavian International Conference on Fluid Power, p. 393-404 (Scandinavian International Conference on Fluid Power SICFP).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  29. Published

    Time-coordinated path following for hydaulic manipulators

    Ghabcheloo, R., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Sairala, H. & Koskinen, K. T. (eds.). Tampere: Scandinavian International Conference on Fluid Power, p. 377-392 (Scandinavian International Conference on Fluid Power SICFP; vol. 12, no. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  30. Published

    Low level control system architecture for autonomous wheel loader

    Ahopelto, M., Uusisalo, J. & Huhtala, K., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Sairala, H. & Koskinen, K. T. (eds.). Tampere: Scandinavian International Conference on Fluid Power, p. 365-376 (Scandinavian International Conference on Fluid Power SICFP; vol. 12, no. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  31. Published

    On-board data transfer of automated heavy machinery

    Karhu, O. & Huhtala, K., 2011, Proceedings of the 8th JFPS International Symposium on Fluid Power, Okinawa 2011, October 25-28, 2011, Okinawa, Japan. Okinawa: JFPS international Symposium on Fluid Power, p. 144-150 (International Symposium on Fluid Power JFPS).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  32. Published

    Analysis and control of a single leg for hydraulically actuated quadruped robot

    Xia, Y., Aaltonen, J. & Koskinen, K. T., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Tampere: Scandinavian International Conference on Fluid Power, p. 149-160 (Scandinavian International Conference on Fluid Power SICFP; vol. 12, no. 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  33. Published

    Hydraulic hybrids

    Linjama, M., 2011, GIM - Generic Intelligent Machines, The 4th GIM Scientific Workshop, January 18-19, 2011, Tampere University of Technology, Tampere, Finland. Tampere: Tampere University of Technology, p. 1-1 1 p. (GIM Scientific Workshop; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  34. Published

    Utilization of the hydraulic engineering design information for semi-automatic simulation model generation

    Markkula, M., Rokala, M., Palonen, T., Alarotu, V., Helminen, M., Koskinen, K. T., Salonen, J., Nykänen, O., Ranta, P. & Pohjolainen, S., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Sairala, H. & Koskinen, K. T. (eds.). Tampere: Scandinavian International Conference on Fluid Power, p. 443-458 (Scandinavian International Conference on Fluid Power SICFP; vol. 12, no. 3).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  35. Published

    Digital fluid power - state of the art

    Linjama, M., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Sairala, H. & Koskinen, K. T. (eds.). Tampere: Scandinavian International Conference on Fluid Power, p. 331-354 (Scandinavian International Conference on Fluid Power SICFP; vol. 12, no. 3).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  36. Published

    Method for automatic testing of control systems

    Kolu, A., Mantere, P., Vallas, A., Hyvönen, M. & Multanen, P., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Sairala, H. & Koskinen, K. T. (eds.). Tampere: Scandinavian International Conference on Fluid Power, p. 111-127 17 p. (Scandinavian International Conference on Fluid Power SICFP; vol. 12, no. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  37. Published

    Verification and Validation of ITER Remote handling System Requirment Using Digital Mocks-Ups

    Sibois, R., Salminen, K., Siuko, M. & Mattila, J., 2011, European Nuclear Young Generation Forum, ENYGF 2011, 17.5.-22.5.2011, Praha. Prague: ENYGF, p. 1-4 4 p. (European Nuclear Young Generation Forum ENYGF).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  38. Published

    Planning of Dependable Remote Handling Control System Architecture for ITER

    Alho, P., Hahto, A., Mattila, J. & Aha, L., 2011, European Nuclear Young Generation Forum, ENYGF 2011, 17.5.-22.5.2011, Praha. Prague: ENYGF, p. 1-7 7 p. (European Nuclear Young Generation Forum ENYGF).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  39. Published

    Versatile Maintenance Solutions in Oil Related Systems

    Rinkinen, J., 2011, The Eight International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 20-22 June 2011, Cardiff, Wales. Northamption: British Institute of Non-destructive Testing, p. 1234-1249 (International Conference on Condition Monitoring and Machinery Failure Prevention Technologies; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  40. Published

    Energy efficient digital hydraulic solutions for mobile booms

    Karvonen, M., 2011, GIM - Generic Intelligent Machines, The 4th GIM Scientific Workshop, January 18-19, 2011, Tampere University of Technology, Tampere, Finland. Tampere: Tampere University of Technology, p. 1-4 4 p. (GIM Scientific Workshop; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  41. Published

    New Power Management System for Fluid Power Applications

    Heikkilä, M., 2011, Proceedings of the 5th GIM Scientific Workshop at Aalto University School of Electrical Engineering 29.-30.11.2011. Espoo: Aalto University, p. 131-138 (GIM Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  42. Published

    The effect of pc-rate on peek-made slipper behaviour in water hydraulic axial piston unit

    Rokala, M. & Koskinen, K., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Tampere: Scandinavian International Conference on Fluid Power, p. 89-102 14 p. (Scandinavian International Conference on Fluid Power SICFP; vol. 12, no. 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  43. Published

    Comparison of measured and predicted dynamic properties of different commercial hydraulic fluids

    Karjalainen, J-P., Karjalainen, R., Huhtala, K. & Vilenius, M., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Sairala, H. & Koskinen, K. T. (eds.). Tampere: Scandinavian International Conference on Fluid Power, p. 281-296 (Scandinavian International Conference on Fluid Power SICFP; vol. 12, no. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  44. Published

    Detection and isolation of leakage and valve faults in hydraulic systems in varying loading conditions

    Nurmi, J., 2011, Proceedings of the 5th GIM Scientific Workshop at Aalto University School of Electrical Engineering 29.-30.11.2011. Espoo: Aalto University, p. 80-88 (GIM Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  45. Published

    Detecting and eliminating the measurement error caused by free air in aircraft hydraulic system on-line particle counting

    Aaltonen, J. & Koskinen, K. T., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Tampere: Scandinavian International Conference on Fluid Power, p. 229-240 (Scandinavian International Conference on Fluid Power SICFP; vol. 12, no. 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  46. Published

    Enhanced mobile machine assembly and maintainability evaluation using virtual and augmented reality

    Mäkiranta, A., Nuutinen, P., Multanen, P., Hyvönen, M., Leino, S-P., Kiviranta, S. & Vehviläinen, M., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Tampere: Scandinavian International Conference on Fluid Power, p. 295-304 (Scandinavian International Conference on Fluid Power SICFP; vol. 12, no. 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  47. Published

    Energy distribution and optimization of the valve controlled actuation system

    Herranen, M., 2011, Proceedings of the 5th GIM Scientific Workshop at Aalto University School of Electrical Engineering 29.-30.11.2011. Espoo: Aalto University, p. 111-124 14 p. (GIM Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  48. Published

    Improving of effectiveness in hydraulic piling machine

    Elo, L., Rinkinen, J., Halonen, A., Holopainen, J., Paavola, J. & Penttinen, M., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Tampere: Scandinavian International Conference on Fluid Power, p. 205-216 (Scandinavian International Conference on Fluid Power SICFP; vol. 12, no. 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  49. Published

    Engine gas exchange controlled by digital hydraulics

    Herranen, M., Siivonen, L. & Huhtala, K., 2011, Proceedings of the 2nd International Conference on Measurement and Control Engineering, ICMCE 2011, October 21-22, 2011, Puerto Rico, USA. New York, NY: ASME Press, p. 1-7 7 p. (International Conference on Measurement and Control Engineering ICMCE; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  50. Published

    Energy efficient digital hydraulic valve control

    Huova, M., 2011, GIM - Generic Intelligent Machines, The 4th GIM Scientific Workshop, January 18-19, 2011, Tampere University of Technology, Tampere, Finland. Tampere: Tampere University of Technology, p. 1-6 6 p. (GIM Scientific Workshop; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  51. Published

    Simulation study - improving efficiency in mobile boom by using digital hydraulic power management system

    Karvonen, M., Heikkilä, M., Huova, M., Linjama, M. & Huhtala, K., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Sairala, H. & Koskinen, K. T. (eds.). Tampere: Scandinavian International Conference on Fluid Power, p. 355-368 (Scandinavian International Conference on Fluid Power SICFP; vol. 12, no. 3).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

ID: 21447