Tampere University of Technology

TUTCRIS Research Portal

Department of Intelligent Hydraulics and Automation

Research unit: Department

  1. B3 Non-refereed article in conference proceedings
  2. Published

    Öljynäytteiden hiukkaslaskennan tärkeimmät standardit

    Niiranen, E., Elo, L. & Multanen, P., 2009, PAMAS 2009 käyttäjäpäivät 10.-11.2.2009, Öljyjärjestelmien hiukkaslaskentakoulutus, Tampereen teknillinen yliopisto, Tampere, Finland. Rinkinen, J., Multanen, P., Elo, L. & Niiranen, E. (eds.). p. 47-61

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  3. Published

    Turvallisuus hydraulijärjestelmän öljynäytteenotossa ja mittauksessa

    Karjalainen, R., 2009, PAMAS 2009 käyttäjäpäivät 10.-11.2.2009, Öljyjärjestelmien hiukkaslaskentakoulutus, Tampereen teknillinen yliopisto, Tampere, Finland. Rinkinen, J., Multanen, P., Elo, L. & Niiranen, E. (eds.). p. 116-120

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  4. Published

    A survey on control of hydraulic servo systems

    Zhai, L. & Virvalo, T., 2008, Fourth Arctic-Mediterranean Post Graduate Workshop on Intelligent Machines and Transport Systems, June 23-27, 2008, Saariselkä, Finland. Karvinen, T. & Keskinen, E. (eds.). p. 5 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  5. Published

    The means of optimizing digital valve system

    Laamanen, A., 2008, Proceedings of the First Workshop on Digital Fluid Power 3rd October, 2008, Tampere, Finland. Linjama, M. & Laamanen, A. (eds.). p. 89-99

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  6. Published

    Diesel engine hydraulics

    Huhtala, K., 2008, Proceedings of the First Workshop on Digital Fluid Power 3rd October, 2008, Tampere, Finland. Linjama, M. & Laamanen, A. (eds.). p. 129-140

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  7. Published

    Simulation as a tool for development of control and interface system module

    Hyvönen, M., Multanen, P. & Huhtala, K., 2008, 1st GIM Scientific Workshop at Helsinki University of Technology, 14.-15.8.2008. p. 87-91

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  8. Published

    Digital hydraulics research at IHA

    Linjama, M., 2008, Proceedings of the First Workshop on Digital Fluid Power 3rd October, 2008, Tampere, Finland. Linjama, M. & Laamanen, A. (eds.). p. 7-30

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  9. Published

    Digital microhydraulics

    Linjama, M. & Karvonen, M., 2008, Proceedings of the First Workshop on Digital Fluid Power 3rd October, 2008, Tampere, Finland. Linjama, M. & Laamanen, A. (eds.). p. 141-152

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  10. Published

    Fault tolerant digital valve system and fault tolerant control

    Siivonen, L., 2008, Proceedings of the First Workshop on Digital Fluid Power 3rd October, 2008, Tampere, Finland. Linjama, M. & Laamanen, A. (eds.). p. 77-88

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  11. Published

    A review of automated boom control and vibration damping methods for mobile machines

    Honkakorpi, J., 2008, Fourth Arctic-Mediterranean Post Graduate Workshop on Intelligent Machines and Transport Systems, June 23-27, 2008, Saariselkä, Finland. Karvinen, T. & Keskinen, E. (eds.). p. 6 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  12. C1 Separate scientific books
  13. Published

    Hydraulitekniikka (1. p.)

    Kauranne, H., Kajaste, J. & Vilenius, M., 2008, Helsinki: WSOY.

    Research output: Book/ReportBookScientificpeer-review

  14. C2 Edited books
  15. Published

    Proceedings of the fifth workshop on digital fluid power, October 24-25, 2012, Tampere, Finland

    Laamanen, A. (ed.) & Linjama, M. (ed.), 2012, Tampere: Tampere University of Technology. Department of Intellidgent Hydraulics and Automation.

    Research output: Book/ReportAnthologyScientificpeer-review

  16. Published

    Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland

    Sairiala, H. (ed.) & Koskinen, K. T. (ed.), 2011, Tampere: Tampere University of Technology.

    Research output: Book/ReportAnthologyScientificpeer-review

  17. Published

    Proceedings of the Third Workshop on Digital Fluid Power, October 13-14 2010, Tampere, Finland

    Laamanen, A. (ed.) & Linjama, M. (ed.), 2010, Tampere: Tampere University of Technology.

    Research output: Book/ReportAnthologyScientificpeer-review

  18. Published

    Proceedings of the First Workshop on Digital Fluid Power 3rd October, 2008 Tampere, Finland

    Linjama, M. (ed.) & Laamanen, A. (ed.), 2008, Tampere University of Technology.

    Research output: Book/ReportAnthologyScientificpeer-review

  19. D1 Article in a trade journal
  20. Published

    Digitaalinen Hydraulisäätö - tulevaisuuden tekniikkaa?

    Siivonen, L., 2012, In : Promaint. 26, 7, p. 41-43

    Research output: Contribution to journalArticleProfessional

  21. Published

    Hydrauliikan aika ei ole ohi - The time of hydraulics is not over

    Linjama, M., 2012, In : Fluid Finland. 11, 2, p. 10-12

    Research output: Contribution to journalArticleProfessional

  22. Published

    Elintarviketeollisuuden koneautomaation kehitys kaipaa tiivistämistä

    Sairiala, H. & Koskinen, K. T., 2012, In : Kehittyvä elintarvike. 23, 4, p. 12-13

    Research output: Contribution to journalArticleProfessional

  23. Published

    Versatile maintenance solutions in oil related systems

    Rinkinen, J., 2011, In : Condition Monitor. 296, p. 5-12

    Research output: Contribution to journalArticleProfessional

  24. Published

    IHA Department of Intelligent Hydraulics and Automation

    Huhtala, K. & Aunola, V., 2011, In : Fluid Finland. 10, 1, p. 10-11

    Research output: Contribution to journalArticleProfessional

  25. Published

    Hiukkasen puhtaammaksi -laboratorio hydraulikomponenttien puhtaustutkimuksiin

    Kuosku, M. & Rinkinen, J., 2011, In : Promaint. 25, 5, p. 42-45

    Research output: Contribution to journalArticleProfessional

  26. Published

    Recent advances in standardisation and education of fluid power in Finland

    Rinkinen, J., Lahtinen, J. & Virta, S., 2011, In : Maintworld, Maintenance & Asset Management. 3, 2, p. 14-18

    Research output: Contribution to journalArticleProfessional

  27. Published

    Hydrauliikan vianetsintä -säästöä systemaattisella toiminnalla

    Törmänen, R., Räihä, K. & Rinkinen, J., 2011, In : Promaint. 25, 5, p. 50-53 4 p.

    Research output: Contribution to journalArticleProfessional

  28. Published

    Digitaalihydrauliikka tulee!

    Linjama, M., 2010, In : Metsäalan ammattilehti. 5, p. 88-89

    Research output: Contribution to journalArticleProfessional

  29. Published

    Experiences of monitoring the condition of military aircraft hydraulic systems

    Virta, P., Aaltonen, J., Koskinen, K. T. & Vilenius, M., 2010, In : Condition Monitor. 280, p. 9-14

    Research output: Contribution to journalArticleProfessional

  30. Published

    Puhtauden valvonta kehittyy

    Rinkinen, J., 2009, In : Promaint. 5/2009, p. 48-53

    Research output: Contribution to journalArticleProfessional

  31. Published

    Väitöskirjan esittely. Nopeutta virtuaalisuunnitteluun uudella integrointialgoritmilla. Rosenbrockin menetelmä on uusi hydraulipiirien numeerisen simuloinnin lähestymistapa

    Esque, S., 2009, In : Fluid Finland. 1/2009, p. 8-11

    Research output: Contribution to journalArticleProfessional

  32. Published

    Hydraulikomponenttien ja -järjestelmien puhtausvalvontastandardien nykytila

    Rinkinen, J., 2009, In : Fluid Finland. 3-4, p. 32-38

    Research output: Contribution to journalArticleProfessional

  33. Published

    IHA digitaalihydrauliikalla maailman ykköseksi

    Vilenius, M., 2009, In : Fluid Finland. p. s. 5

    Research output: Contribution to journalArticleProfessional

  34. Published

    Tavoitteena häviötön hydrauliikka

    Linjama, M., 2009, In : Fluid Finland. 3-4, p. 12-17

    Research output: Contribution to journalArticleProfessional

  35. Published

    Putkistopasseja TTY/IHA:n henkilökunnalle

    Rinkinen, J., 2009, In : Fluid Finland. 2/2009, p. 24-27

    Research output: Contribution to journalArticleProfessional

  36. Published

    Digitaalisen mikrohydrauliikan sovellussatoa

    Linjama, M., 2009, In : Fluid Finland. 2/2009, p. 30-31

    Research output: Contribution to journalArticleProfessional

  37. Published

    FPMC Symposiumi Iso-Britanniassa

    Elo, L., 2008, In : Fluid Finland. 3, p. 32-34

    Research output: Contribution to journalArticleProfessional

  38. Published

    Digitaalihydrauliikan seminaarin suosio yllätti

    Linjama, M., 2008, In : Fluid Finland. 3, p. 36-37

    Research output: Contribution to journalArticleProfessional

  39. Published

    Nya standarder i Finland för hur industrihydrauliksystem skall upphandlas

    Rinkinen, J. & Viertävä, J., 2008, In : Fluid Scandinavica, Specialtidningen för hydraulik/pneumatik. 1, p. 35-36

    Research output: Contribution to journalArticleProfessional

  40. Published

    Virtauksen perusilmiöt vesihydrauliikan istukkaventtiilissä

    Leino, T., 2008, In : Fluid Finland. 3, p. 12-15

    Research output: Contribution to journalArticleProfessional

  41. Published

    Etelä-Afrikan Tribologia 2008 -konferenssi

    Rinkinen, J. & Löppönen, M., 2008, In : Fluid Finland. p. 20-23

    Research output: Contribution to journalArticleProfessional

  42. Published

    Digital schlägt Analog um 40%

    Linjama, M., 2008, In : Fluid. 7-8/2008, p. 12-13

    Research output: Contribution to journalArticleProfessional

  43. Published

    Vesihydrauliikan kunnonvalvonta

    Riipinen, H., 2008, In : Fluid Finland. p. 12-14

    Research output: Contribution to journalArticleProfessional

  44. Published

    Digitaalihydrauliikan kuulumiset

    Linjama, M., 2008, In : Fluid Finland. 2, p. 8-10

    Research output: Contribution to journalArticleProfessional

  45. Published

    Vesihydrauliikan sovelluksia

    Sairiala, H. & Koskinen, K. T., 2008, In : Fluid Finland. p. 15-17

    Research output: Contribution to journalArticleProfessional

  46. D3 Professional conference proceedings
  47. Published

    Kokemuksia inline- ja online-mittauksista - ISO/SAE -standardit

    Elo, L., Pekkonen, J. & Rinkinen, J., 2012, KompuNW -verkostoseminaari TTY:ssa 9.10.2012. Tampere: Tampere University of Technology, IHA - Department of Intelligent Hydraulics and Automation, p. 1-13 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  48. Published

    IHA:n KompuNW-testipenkillä tehtyjä mittauksia

    Pekkonen, J., Elo, L., Kuosku, M. & Rinkinen, J., 2012, KompuNW -verkostoseminaari TTY:ssa 9.10.2012. Tampere: Tampere University of Technology, IHA - Department of Intelligent Hydraulics and Automation, p. 1-16 16 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  49. Published

    Mittaustuloksia kaupallisilla puhtaustestikaapeilla

    Kuosku, M., Pekkonen, J. & Rinkinen, J., 2012, KompuNW -verkostoseminaari TTY:ssa 9.10.2012. Tampere: Tampere University of Technology, IHA - Department of Intelligent Hydraulics and Automation, p. 1-15 15 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  50. Published

    Voiteluöljyn online- ja inline-kunnonvalvonta, "Uusia tapoja ja menetelmiä öljyn kunnon ja vaihtovälin määrittelemiseksi"

    Elo, L. & Rinkinen, J., 2012, Voiteluaineanalyysit mittaavan kunnossapidon työkaluna, AEL -seminaari 29.8.2012. Helsinki: Elinkeinoelämän koulutuspalvelut, p. 1-14 14 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  51. Published

    Komponentin ja järjestelmän elinkaaren mallintaminen analyyttisillä menetelmillä

    Aaltonen, J., 2012, Hydraulijärjestelmien modernisointi, 21.-22.3.2012, Suomen ilmailumuseo, Vantaa, Kunnossapitoyhdistys. Helsinki: Kunnossapitoyhdistys ProMaint, p. 1-9 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  52. D4 Published development or research report or study
  53. Published

    2008-2010 Host Activities Related to DTP2 Test Facility Operation and Upgrade Preparation

    Siuko, M., Järvenpää, J. & Mattila, J., 2011, Valtion teknillinen tutkimuslaitos. 11 p. (VTT Publications; vol. 764)

    Research output: Book/ReportCommissioned reportProfessional

  54. Published

    Divertor RH design updates and DTP2 Phase 2 testing

    Siuko, M., Järvenpää, J. & Mattila, J., 2011, Espoo: VTT. 6 p. (VTT Publications; vol. 764)

    Research output: Book/ReportCommissioned reportProfessional

  55. Published

    2008-2009 Host Activities Related to DTP2 Test Facility Operation and Upgrade Preparation

    Siuko, M., Järvenpää, J. & Mattila, J., 2010, VTT. 12 p. (VTT Publications; vol. 738)

    Research output: Book/ReportCommissioned reportProfessional

  56. Published

    2008-2009 Host Activities Related to DTP2 Test Facility Operation and Upgrade Preparation

    Siuko, M., Järvenpää, J. & Mattila, J., 2009, VTT. 10 p. (VTT Publications; vol. 709)

    Research output: Book/ReportCommissioned reportProfessional

ID: 21447