Tampere University of Technology

TUTCRIS Research Portal

Department of Intelligent Hydraulics and Automation

Research unit: Department

1 - 100 out of 327Page size: 100
  1. Published

    Aircraft Hydraulic System Fault Finding and Troubleshooting Using On-Line Particle Counters

    Aaltonen, J., Alarotu, V. & Koskinen, K. T., 2011, The Eight International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 20-22 June 2011, Cardiff, Wales. Northamption: British Institute of Non-destructive Testing, p. 1275-1282 (International Conference on Condition Monitoring and Machinery Failure Prevention Technologies; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review

    Full text: ExLibris SFX link
  2. Published

    Komponentin ja järjestelmän elinkaaren mallintaminen analyyttisillä menetelmillä

    Aaltonen, J., 2012, Hydraulijärjestelmien modernisointi, 21.-22.3.2012, Suomen ilmailumuseo, Vantaa, Kunnossapitoyhdistys. Helsinki: Kunnossapitoyhdistys ProMaint, p. 1-9 9 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Professional

    Full text: ExLibris SFX link
  3. Published

    Concept of the electro-water-hydraulic hybrid mobile machine

    Aaltonen, J., Sairiala, H. & Koskinen, K. T., 2012, Topic water hydraulics, Dutch Fluid Power Conference, Ede, The Netherlands 13th September 2012. p. 97-111 15 p. (Dutch Fluid Power Conference).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific

    Full text: ExLibris SFX link
  4. Published

    Puhtauden mittauksen erityispiirteet sotilaslentokoneissa

    Aaltonen, J., 2009, PAMAS 2009 käyttäjäpäivät 10.-11.2.2009, Öljyjärjestelmien hiukkaslaskentakoulutus, Tampereen teknillinen yliopisto, Tampere, Finland. Rinkinen, J., Multanen, P., Elo, L. & Niiranen, E. (eds.). p. 121-127

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific

    Full text: ExLibris SFX link
  5. Published

    Detecting and eliminating the measurement error caused by free air in aircraft hydraulic system on-line particle counting

    Aaltonen, J. & Koskinen, K. T., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Tampere: Scandinavian International Conference on Fluid Power, p. 229-240 (Scandinavian International Conference on Fluid Power SICFP; vol. 12, no. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review

    Full text: ExLibris SFX link
  6. Published

    Utilization of RFID and pressure sensor for intelligent hose condition monitoring

    Aarnio, A., Elo, L., Mäkinen, E., Ukkonen, L., Soini, M., Sydänheimo, L., Vilenius, M. & Kivikoski, M., 2008, Fluid Power and Motion Control FPMC 2008, 10-12 September 2008, Bath, UK. Johnston, D. N. & Plummer, A. R. (eds.). p. 27-40

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review

    Full text: ExLibris SFX link
  7. Published

    Time-coordinated path following of multiple UAVs over time-varying networks using L1 adaptation

    Aguiar, A. P., Pascoal, A. M., Kaminer, I., Dobrokhodov, V., Xargay, E., Hovakimyan, N., Cao, C. & Ghabcheloo, R., 2009, AIAA Guidance, Navigation and Control Conference and Exhibit, Honolulu, Hawaii, 18-21 August, 2008. p. 25 p

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review

    Full text: ExLibris SFX link
  8. Published

    Unified software development approach for the safety-critical ITER maintenance devices

    Aha, L., Saarinen, H., Tiitinen, J., Muhammad, A., Mattila, J., Siuko, M., Vilenius, M., Järvenpää, J., Irving, M., Damiani, C. & Semeraro, L., 2009, In : Fusion Engineering and Design. 84, 2-6, p. 369-374

    Research output: Contribution to journal › Article › Scientific › peer-review

    Full text: ExLibris SFX link
  9. Published

    DTP2 control room operator and remote handing operation designer responsibilities and information available to them

    Aha, L., Salminen, K., Hahto, A., Saarinen, H., Mattila, J., Siuko, M. & Semeraro, L., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 2078-2081

    Research output: Contribution to journal › Article › Scientific › peer-review

    Full text: ExLibris SFX link
  10. Published

    Displacement controlled hydraulic systems

    Ahola, V., 2010, Proceedings of the 3rd GIM Scientific Workshop, February 17-18, 2010, Aalto University School of Science and Technology. Halme, A. & Pirttioja, T. (eds.). Espoo, p. 1-13 13 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review

    Full text: ExLibris SFX link
  11. Published

    Displacement controlled machines

    Ahola, V., 2011, Proceedings of the 5th GIM Scientific Workshop at Aalto University School of Electrical Engineering 29.-30.11.2011. Espoo: Aalto University, p. 124-131 (GIM Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review

    Full text: ExLibris SFX link
  12. Published

    Power management in a mobile work machine: reduced diesel rpm for better energy efficiency

    Ahopelto, M., Backas, J. & Huhtala, K., 2012, Proceedings of the 7th FPNI PhD Symposium on Fluid Power, University of Modena and Reggio Emilia, June 27-30, 2012, Reggio Emilia, Italy. Milani, M., Montorsi, L. & Paltrinieri, F. (eds.). p. 133-148 (Fluid Power Net International PhD Symposium; vol. 7).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review

    Full text: ExLibris SFX link
  13. Published

    Low level control system architecture for autonomous wheel loader

    Ahopelto, M., Uusisalo, J. & Huhtala, K., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Sairala, H. & Koskinen, K. T. (eds.). Tampere: Scandinavian International Conference on Fluid Power, p. 365-376 (Scandinavian International Conference on Fluid Power SICFP; vol. 12, no. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review

    Full text: ExLibris SFX link
  14. Published

    Development process of control system

    Ahopelto, M., 2011, GIM - Generic Intelligent Machines, The 4th GIM Scientific Workshop, January 18-19, 2011, Tampere University of Technology, Tampere, Finland. Tampere: Tampere University of Technology, p. 1-7 7 p. (GIM Scientific Workshop; vol. 4).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review

    Full text: ExLibris SFX link
  15. Published

    Power Management of Mobile Machines with Multiple Consumers

    Ahopelto, M., 2012, GIM - Generic Intelligent Machines, Proceedings of the 6th GIM Scientific Workshop, November 7-8, 2012, Tampere, Finland. Huhtala, K. & Uusi-Heikkilä, J. (eds.). Tampere: Tampere University of Technology. Department of Intelligent Hydraulics and Automation, p. 31-37 (GIM Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review

    Full text: ExLibris SFX link
  16. Published

    Koneenosien suunnittelu

    Airila, M., Ekman, K., Hautala, P., Kivioja, S., Kleimola, M., Martikka, H., Miettinen, J., Niemi, E., Ranta, A., Rinkinen, J., Salonen, P., Verho, A., Vilenius, M. & Välimaa, V., 2010, Unknown Publisher. 796 p.

    Research output: Book/Report › Book › Professional

    Full text: ExLibris SFX link
  17. Published

    Planning of Dependable Remote Handling Control System Architecture for ITER

    Alho, P., Hahto, A., Mattila, J. & Aha, L., 2011, European Nuclear Young Generation Forum, ENYGF 2011, 17.5.-22.5.2011, Praha. Prague: ENYGF, p. 1-7 7 p. (European Nuclear Young Generation Forum ENYGF).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review

    Full text: ExLibris SFX link
  18. Published

    Dependable Control Systems Design and Evaluation

    Alho, P. & Mattila, J., 2011, Conference on Systems Engineering Research (CSER) 2011 Redondo Beach, California, USA, April 15-16, 2011.. Redondo Beach, CA: CSER 2011, (Conference on Systems Engineering Research CSER).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review

    Full text: ExLibris SFX link
  19. Published

    Remote support for maintenance tasks by the use of Augmented Reality: the ManuVAR project

    Azpiazu, J., Siltanen, S., Multanen, P., Mäkiranta, A., Barrena, N., Diez, A., Agirre, J. & Smith, T., 2011, Proceedings of the 9th Congress on Virtual Reality Applications, CARVI 2011. San Sebastian: Tecnalia, p. 1-6 6 p. (Congress on Virtual Reality Applications CARVI; vol. 9).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review

    Full text: ExLibris SFX link
  20. Published

    IHA-machine: a future mobile machine

    Backas, J., Ahopelto, M., Huova, M., Vuohijoki, A., Karhu, O., Ghabcheloo, R. & Huhtala, K., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Tampere: Scandinavian International Conference on Fluid Power, p. 161-176 (Scandinavian International Conference on Fluid Power SICFP; vol. 12, no. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review

    Full text: ExLibris SFX link
  21. Published

    Modelling the efficiencies of hydraulic pumps with neural networks

    Backas, J. & Huhtala, K., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Sairala, H. & Koskinen, K. T. (eds.). Tampere: Scandinavian International Conference on Fluid Power, p. 11-24 (Scandinavian International Conference on Fluid Power SICFP; vol. 12, no. 3).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review

    Full text: ExLibris SFX link
  22. Published

    An Optimal Controller for Hydrostatic Drives

    Backas, J., 2012, GIM - Generic Intelligent Machines, Proceedings of the 6th GIM Scientific Workshop, November 7-8, 2012, Tampere, Finland. Huhtala, K. & Uusi-Heikkilä, J. (eds.). Tampere: Tampere University of Technology. Department of Intelligent Hydraulics and Automation, p. 83-88 (Generic Intelligent Machines Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review

    Full text: ExLibris SFX link
  23. Published

    Research of optimizing the prime mover and hydraulics of mobile machines

    Backas, J., 2011, GIM - Generic Intelligent Machines, The 4th GIM Scientific Workshop, January 18-19, 2011, Tampere University of Technology, Tampere, Finland. Tampere: Tampere University of Technology, p. 1-5 5 p. (GIM Scientific Workshop; vol. 4).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review

    Full text: ExLibris SFX link
  24. Published

    Experimental and numerical analysis of the hydraulic circuit of a high pressure common rail diesel fuel injection system

    Beierer, P., 21 Dec 2007, Tampere: Tampere University of Technology. 198 p. (Tampere University of Technology. Publication; vol. 715)

    Research output: Book/Report › Doctoral thesis › Monograph

    Full text: ExLibris SFX link
  25. Published

    Development of Controllers Using Simulink and Contract-Based Design. Chapter 8

    Boström, P., Huova, M., Olszewska, M., Linjama, M., Heikkilä, M., Sere, K. & Walden, M., 2011, Dependability and Computer Engineering: Concepts for Software-Intensive Systems. Petre, L., Sere, K. & Troubitsyna, E. (eds.). Hershey, PA: IGI Global, p. 151-169

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Scientific › peer-review

    Full text: ExLibris SFX link
  26. Published

    Contract-based design in controller development and its evaluation

    Boström, P., Plaska, M., Huova, M., Linjama, M., Heikkilä, M., Sere, K. & Walden, M., 2009, Nodes 09: Nordic workshop and doctoral symposium on Dependability and security, Linköping, Sweden, April 27, 2009. Asplund, M., Nadjm-Tehrani, S. & Petre, L. (eds.). p. 21-27

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review

    Full text: ExLibris SFX link
  27. Published

    A mobile platform for remote inspection inside ESRF tunnel

    Chaize, J. M., Robinson, D., Hardy, L., Mattila, J. & Hahto, A., 2009, The International Conference on Accelerator and Large Experimental Physics Control Systems ICALEPCS 2009, October 12-16, 2009, Kobe, Japan. p. 3 p

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific

    Full text: ExLibris SFX link
  28. Published

    Minimizing the Maximum Curvature of Quadratic Bezier Curves with a Tetragonal Concave Polygonal Boundary Constraint

    Choi, J., Curry, R. E. & Elkaim, G. H., 2011, In : Computer-Aided Design. 44, 4, p. 1-22 22 p.

    Research output: Contribution to journal › Article › Scientific › peer-review

    Full text: ExLibris SFX link
  29. Published

    An Efficient Heuristic Estimate for Non-holonomic Motion Planning

    Choi, J-W., 2012, The 4th Workshop on Planning, Perception and Navigation for Intelligent Vehicles, October 7th, 2012 Vilamoura, Algarve, Portugal. p. 1-6 6 p. (Workshop on Planning, Perception and Navigation for Intelligent Vehicles).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review

    Full text: ExLibris SFX link
  30. Published

    A Potential Field and Bug Compound Navigation Algorithm for Nonholonomic Wheeled Robots

    Choi, J., 2011, Proceedings of the 5th GIM Scientific Workshop at Aalto University School of Electrical Engineering 29.-30.11.2011. Espoo: Aalto University, p. 62-70 (GIM Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review

    Full text: ExLibris SFX link
  31. Published

    Voiteluöljyn online- ja inline-kunnonvalvonta, "Uusia tapoja ja menetelmiä öljyn kunnon ja vaihtovälin määrittelemiseksi"

    Elo, L. & Rinkinen, J., 2012, Voiteluaineanalyysit mittaavan kunnossapidon työkaluna, AEL -seminaari 29.8.2012. Helsinki: Elinkeinoelämän koulutuspalvelut, p. 1-14 14 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Professional

    Full text: ExLibris SFX link
  32. Published

    FPMC Symposiumi Iso-Britanniassa

    Elo, L., 2008, In : Fluid Finland. 3, p. 32-34

    Research output: Contribution to journal › Article › Professional

    Full text: ExLibris SFX link
  33. Published

    Improving of effectiveness in hydraulic piling machine

    Elo, L., Rinkinen, J., Halonen, A., Holopainen, J., Paavola, J. & Penttinen, M., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Tampere: Scandinavian International Conference on Fluid Power, p. 205-216 (Scandinavian International Conference on Fluid Power SICFP; vol. 12, no. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review

    Full text: ExLibris SFX link
  34. Published

    Kokemuksia inline- ja online-mittauksista - ISO/SAE -standardit

    Elo, L., Pekkonen, J. & Rinkinen, J., 2012, KompuNW -verkostoseminaari TTY:ssa 9.10.2012. Tampere: Tampere University of Technology, IHA - Department of Intelligent Hydraulics and Automation, p. 1-13 13 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Professional

    Full text: ExLibris SFX link
  35. Published

    Model-based design of power-split drivelines

    Erkkilä, M., 2009, Tampere: Tampere University of Technology. 102 p. (Tampereen teknillinen yliopisto. Julkaisu; vol. 835)

    Research output: Book/Report › Doctoral thesis › Collection of Articles

    Full text: ExLibris SFX link
  36. Published

    Model-based design of power-split drivelines

    Erkkilä, M., Huhtala, K., Vilenius, M. & Virvalo, T., 2009, Agricultural Engineering Conference 2009, 6.-7.11.2009, Hannover, Germany. VDI-Berichte. p. 327-332

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review

    Full text: ExLibris SFX link
  37. Published

    GVT-Getriebe mit hydrostatischer Verstelleinheit

    Erkkilä, M. & Viitasalo, V., 2010, In : Mobile Maschinen. 1/2010, p. 32-33

    Research output: Contribution to journal › Article › Scientific

    Full text: ExLibris SFX link
  38. Published

    New energy efficient valve concept

    Erkkilä, M., Lehto, E. & Virvalo, T., 2009, The 11th Scandinavian International Conference on Fluid Power SICFP'09, Linköping, Sweden, June 2-4 2009. p. 11 p

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review

    Full text: ExLibris SFX link
  39. Published

    Negative load sensing

    Erkkilä, M., Jalkanen, T., Lehto, E. & Virvalo, T., 2010, 7th International Fluid Power Conference (7th IFK), 22-24 March2010, Aachen, Germany. p. 1-12 12 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review

    Full text: ExLibris SFX link
  40. Published

    Väitöskirjan esittely. Nopeutta virtuaalisuunnitteluun uudella integrointialgoritmilla. Rosenbrockin menetelmä on uusi hydraulipiirien numeerisen simuloinnin lähestymistapa

    Esque, S., 2009, In : Fluid Finland. 1/2009, p. 8-11

    Research output: Contribution to journal › Article › Professional

    Full text: ExLibris SFX link
  41. Published

    The use of digital mock-ups on the development of the divertor test platform 2

    Esque, S., Mattila, J., Siuko, M., Vilenius, M., Järvenpää, J., Semeraro, L., Irving, M. & Damiani, C., 2009, In : Fusion Engineering and Design. 84, 2-6, p. 752-756

    Research output: Contribution to journal › Article › Scientific › peer-review

    Full text: ExLibris SFX link
  42. Published

    A new approach for numerical simulation of fluid power circuits using Rosenbrock methods

    Esque, S., 28 Nov 2008, Tampere: Tampere University of Technology. 125 p. (Tampere University of Technology. Publication; vol. 763)

    Research output: Book/Report › Doctoral thesis › Monograph

    Full text: ExLibris SFX link
  43. Published

    A new approach for numerical simulation of fluid power circuits using Rosenbrock methods

    Esque, S., 2009, The Second Workshop on Generic Intelligent Machines, May 14-15, 2009, Tampere University of Technology, Tampere, Finland. Huhtala, K. & Uusi-Heikkilä, J. (eds.). p. 9 p

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review

    Full text: ExLibris SFX link
  44. Published

    GIMsim: Hardware in the loop simulator for autonomous hydraulic mobile machines

    Ghabcheloo, R., 2011, GIM - Generic Intelligent Machines, The 4th GIM Scientific Workshop, January 18-19, 2011, Tampere University of Technology, Tampere, Finland. Tampere: Tampere University of Technology, p. 1-13 13 p. (GIM Scientific Workshop; vol. 4).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review

    Full text: ExLibris SFX link
  45. Published

    New steering mechanism and hydrostatic transmission system for articulated-frame-steering mobile machines

    Ghabcheloo, R., Hyvönen, M., Vuohijoki, A., Huhtala, K. & Vilenius, M., 2009, The 11th Scandinavian International Conference on Fluid Power SICFP'09, Linköping, Sweden, June 2-4 2009. p. 13 p

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review

    Full text: ExLibris SFX link
  46. Published

    A general framework for multiple vehicle time-coordinated path following control

    Ghabcheloo, R., Kaminer, I., Aguiar, A. P. & Pascoal, A., 2009, Proceedings of the ACC 2009 - American Control Conference, St. Louis, Missouri, USA, 2009. p. 8 p

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review

    Full text: ExLibris SFX link
  47. Published

    Pallet detection and tracking: position based visual servoing

    Ghabcheloo, R., 2012, Proceedings of the 6th GIM Scientific Workshop, November 7-8, 2012, Tampere, Finland. Huhtala, K. & Uusi-Heikkilä, J. (eds.). Tampere: Tampere University of Technology. Department of Intelligent Hydraulics and Automation, p. 117-123 (GIM Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review

    Full text: ExLibris SFX link
  48. Published

    Time-coordinated path following for hydaulic manipulators

    Ghabcheloo, R., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Sairala, H. & Koskinen, K. T. (eds.). Tampere: Scandinavian International Conference on Fluid Power, p. 377-392 (Scandinavian International Conference on Fluid Power SICFP; vol. 12, no. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review

    Full text: ExLibris SFX link
  49. Published

    Coordinated Control of Hydraulic Mobile Manipulators

    Ghabcheloo, R. & Huhtala, K., 2012, The 2nd IFAC Workshop on Multivehicle Systems, MVS, 3-4 October 2012, Espoo, Finland. Halme, A. & Suomela, J. (eds.). Laxenburg: The International Federation of Automatic Control IFAC, p. 37-42 (IFAC Workshop on Multivehicle Systems; vol. 2, no. Part 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review

    Full text: ExLibris SFX link
  50. Published

    Autonomous motion control of a wheel loader

    Ghabcheloo, R., Hyvönen, M., Uusisalo, J., Karhu, O., Järä, J. & Huhtala, K., 2009, The Second Workshop on Generic Intelligent Machines, May 14-15, 2009, Tampere University of Technology, Tampere, Finland. Huhtala, K. & Uusi-Heikkilä, J. (eds.). p. 11 p

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review

    Full text: ExLibris SFX link
  51. Published

    Coordinated path-following in the presence of communication losses and time delays

    Ghabcheloo, R., Aguiar, A. P., Pascoal, A., Silvestre, C., Kaminer, I. & Hespanha, J., 2009, In : SIAM Journal on Control and Optimization. 48, 1, p. 234-265

    Research output: Contribution to journal › Article › Scientific › peer-review

    Full text: ExLibris SFX link
  52. Published

    Modeling and motion control of an articulated-frame-steering hydraulic mobile machine

    Ghabcheloo, R. & Hyvönen, M., 2009, 17th Mediterranean Conference on Control and Automation MED '09, June 24-26, 2009, Thessaloniki, Greece. p. 92-97

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review

    Full text: ExLibris SFX link
  53. Published

    Autonomous motion control of a wheel loader

    Ghabcheloo, R., Hyvönen, M., Uusisalo, J., Karhu, O., Järä, J. & Huhtala, K., 2009, Proceedings of the ASME 2009 Dynamic Systems and Control Conference (DSCC2009), October 12-14, 2009, Hollywood, California, USA. p. 8 p

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review

    Full text: ExLibris SFX link
  54. Published

    Service-oriented ad-hoc method for unforeseen scenarios

    Hahto, A., Rasi, T., Kivelä, T., Honkakorpi, J. & Mattila, J., 2011, Fifth International Workshop on Robotics for risky interventions and Environmental Surveillance-Maintenance 5th IARP RISE’2011, 20-22 June, C-ELROB 2011, 21-24 June, Brussels – Leuven. Leuven: IARP, p. 1-6 6 p. (International Workshop on Robotics for Risky Interventions and Environmental Surveillance-Maintenance IARP RISE, C-ELROB).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review

    Full text: ExLibris SFX link
  55. Published

    Automated object locator in a forest forwarder

    Hahto, A., Mattila, J. & Koivisto, H., 2010, In : Applied Artificial Intelligence. 24, 7, p. 711-721

    Research output: Contribution to journal › Article › Scientific › peer-review

    Full text: ExLibris SFX link
  56. Published

    Supervisory system for DTP2 remote handling operations

    Hahto, A., Aha, L., Nurminen, T., Aaltonen, A., Heikkilä, L., Mattila, J., Siuko, M., Saarinen, H. & Semeraro, L., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 2047-2050

    Research output: Contribution to journal › Article › Scientific › peer-review

    Full text: ExLibris SFX link
  57. Published

    Path planning for multiple marine vehicles

    Häusler, A. J., Ghabcheloo, R., Kaminer, I., Pascoal, A. M. & Aguiar, A. P., 2009, Oceans'09 IEEE Bremen, Balancing technology with future needs, 11-14 May 2009, Bremen, Germany. p. 9 p

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review

    Full text: ExLibris SFX link
  58. Published

    Temporally and spatially deconflicted path planning for multiple autonomous marine vehicles

    Häusler, A. J., Ghabcheloo, R., Pascoal, A. M., Aguiar, A. P., Kaminer, I. I. & Dobrokhodov, V. N., 2009, 8th IFAC International Conference on Manoeuvring and Control of Marine Craft (MCMC'2009), September 16-18, 2009, Guarujá, Brazil. p. 6 p

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review

    Full text: ExLibris SFX link
  59. Published

    Multiple marine vehicle deconflicted path planning with currents and communication constraints

    Häusler, A., Ghabcheloo, R., Pascoal, M. A. & Aguiar, A. P., 2010, The 7th IFAC Symposium on Intelligent Autonomous Vehicles IAV'10, Lecce, Italy, September 2010. p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review

    Full text: ExLibris SFX link
  60. Published

    Experimental evaluation of a piston-type digital pump-motor-transformer with two independent outlets

    Heikkilä, M., Tammisto, J., Huova, M., Huhtala, K. & Linjama, M., 2010, Fluid Power and Motion Control (FPMC 2010), 15-17 September 2010, University of Bath, UK. Johnston, D. N. & Plummer, A. (eds.). p. 83-97

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review

    Full text: ExLibris SFX link
  61. Published

    Direct connection of digital hydraulic power management system and double acting cylinder - a simulation study

    Heikkilä, M. & Linjama, M., 2011, The Fourth Workshop on Digital Fluid Power, 21st-22nd November, 2011, Linz, Austria. Linz: DFP-Workshops, p. 59-74 (Workshop on Digital Fluid Power; vol. 4).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review

    Full text: ExLibris SFX link
  62. Published

    Collaboration with a multitasking service robot performing skilled tasks

    Heikkilä, M., 2009, In: Huhtala, K. & Uusi-Heikkilä, J. The Second Workshop on Generic Intelligent Machines, May 14-15, 2009, Tampere University of Technology, Tampere, Finland. p. 11 p

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review

    Full text: ExLibris SFX link
  63. Published

    Experimental evaluation of a digital hydraulic power management system

    Heikkilä, M., Tammisto, J., Huova, M., Huhtala, K. & Linjama, M., 2010, Proceedings of the Third Workshop on Digital Fluid Power, October 13-14 2010, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). p. 129-142

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review

    Full text: ExLibris SFX link
  64. Published

    Analysis of the new architecture proposal for the CMM control system

    Heikkilä, L., Saarinen, H., Aha, L., Viinikainen, M., Mattila, J., Hahto, A., Siuko, M. & Semeraro, L., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 2071-2074

    Research output: Contribution to journal › Article › Scientific › peer-review

    Full text: ExLibris SFX link
  65. Published

    Improving damping characteristics of displacement controlled digital hydraulic system

    Heikkilä, M. & Linjama, M., 2012, DFP 12, Proceedings of the fifth workshop on digital fluid power, October 24-25, 2012, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). Tampere: Tampere University of Technology. Department of Intellidgent Hydraulics and Automation, p. 75-88 (Workshop on digital fluid power).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review

    Full text: ExLibris SFX link
  66. Published

    New Power Management System for Fluid Power Applications

    Heikkilä, M., 2011, Proceedings of the 5th GIM Scientific Workshop at Aalto University School of Electrical Engineering 29.-30.11.2011. Espoo: Aalto University, p. 131-138 (GIM Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review

    Full text: ExLibris SFX link
  67. Published

    Effect of oil viscosity on filter performance in lubrication oil system

    Heiskanen, V., Mäkelä, T., Kapanen, P. & Rinkinen, J., 2012, Proceedings of the 11th World Filtration Congress & Exhibition, WFC11, April 16-20, 2012, Graz, Austria. Vienna, Austria: Gesellschaft Österreichischer Chemiker GÖCH, p. 1-15 15 p. (World Filtration Congress).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review

    Full text: ExLibris SFX link
  68. Published

    A New Method and Format for Describing CANopen System Topology

    Helminen, M., Salonen, J., Saha, H., Nykänen, O., Koskinen, K. T., Ranta, P. & Pohjolainen, S., 2012, Proceedings of the 13th International CAN Conference, iCC 2012 in Hambach Castle, March 5 to March 6, Germany. CAN in Automation e.V., p. 1-8 8 p. (International CAN Conference).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific

    Full text: ExLibris SFX link
  69. Published

    Virtual machine laboratory based on m1-technology

    Helminen, M., Palonen, T., Rokala, M., Ranta, P., Mäkelä, T. & Koskinen, K. T., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Tampere: Scandinavian International Conference on Fluid Power, p. 321-334 (Scandinavian International Conference on Fluid Power SICFP; vol. 12).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review

    Full text: ExLibris SFX link
  70. Published

    Optimization and energy consumption of electro-hydraulic valve actuation system through valve event timing range

    Herranen, M., Huhtala, K. & Vilenius, M., 2010, Fluid Power and Motion Control (FPMC 2010), 15-17 September 2010, University of Bath, UK. Johnston, D. N. & Plummer, A. (eds.). p. 433-445

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review

    Full text: ExLibris SFX link
  71. Published

    The energy balance of the electro-hydraulic linear actuation system

    Herranen, M., Huhtala, K. & Vilenius, M., 2010, In : Journal of Energy and Power Engineering. 4, 8, p. 57-63

    Research output: Contribution to journal › Article › Scientific

    Full text: ExLibris SFX link
  72. Published

    Comparison of control strategies of an electro hydraulic valve actuation system

    Herranen, M., Virvalo, T., Huhtala, K., Vilenius, M. & Liljenfeldt, G., 2009, SAE 2009 World Congress, Detroit, Michigan, April 20-23, 2009. p. 11 p

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review

    Full text: ExLibris SFX link
  73. Published

    Energy distribution and optimization of the valve controlled actuation system

    Herranen, M., 2011, Proceedings of the 5th GIM Scientific Workshop at Aalto University School of Electrical Engineering 29.-30.11.2011. Espoo: Aalto University, p. 111-124 14 p. (GIM Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review

    Full text: ExLibris SFX link
  74. Published

    Valve train with learning control features

    Herranen, M., Virvalo, T., Huhtala, K., Glader, T. & Kallio, I., 2010, 26th CIMAC World Congress on Combustion Engine Technology for Ship Propulsion Power Generation Rail Traction. June, 14-17, 2010, Bergen, Norway. p. 1-10 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review

    Full text: ExLibris SFX link
  75. Published

    Engine gas exchange controlled by digital hydraulics

    Herranen, M., Siivonen, L. & Huhtala, K., 2011, Proceedings of the 2nd International Conference on Measurement and Control Engineering, ICMCE 2011, October 21-22, 2011, Puerto Rico, USA. New York, NY: ASME Press, p. 1-7 7 p. (International Conference on Measurement and Control Engineering ICMCE; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review

    Full text: ExLibris SFX link
  76. Published

    Analysis of Adaptive/Learning Control Methods in Cyclic Hydraulic System

    Herranen, M., Enlund, J., Uusisalo, J. & Huhtala, K., 2012, Proceedings of the 8th International Fluid Power Conference, Dresden, March 26-28, 2012. Dresden: Technische Universität Dresden, Institute of Fluid Power, p. 399-410 (International Fluid Power Conference; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review

    Full text: ExLibris SFX link
  77. Published

    The energy balance of the electro-hydraulic linear actuation system

    Herranen, M., Huhtala, K. & Vilenius, M., 2009, Proceedings of the International Conference on Power Engineering 2009, ICOPE-09, November 16-20, 2009, Kobe, Japan. p. 6 p

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review

    Full text: ExLibris SFX link
  78. Published

    AMAD-painekytkimien laboratoriotestaus

    Hietala, J-P., 2009, Lentotekniikan rakennetutkimuksen neuvottelupäivät VII, 27.-28.8.2009, Tampere. Aaltonen, J. (ed.). p. 1-14 14 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review

    Full text: ExLibris SFX link
  79. Published

    Comparison between an aircraft speed brake actuator high order linear model and a semi-empirical non-linear model in real time simulation

    Hietala, J-P., Aaltonen, J., Koskinen, K. T. & Vilenius, M., 2011, AST 2011, 3rd International Workshop on Aircraft System Technologies, March 31 - April 1, 2011, Hamburg, Germany. Hamburg: Hamburg University of Technology, p. 65-71 (International Workshop on Aircraft System Technologies AST; vol. 3).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review

    Full text: ExLibris SFX link
  80. Published

    Modelling and simulation of the aircraft rudder hydraulic servo actuator with dynamic interconnections to flight dynamics and flight control system models

    Hietala, J-P., Aaltonen, J., Koskinen, K. T. & Vilenius, M., 2009, SICFP'09 Proceedings, the11th Scandinavian International Conference on Fluid Power, Linköping, Sweden, June 2-4 2009. p. 12 p

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review

    Full text: ExLibris SFX link
  81. Published

    Aircraft hydraulic system model integration to fligh simulation model

    Hietala, J-P., Aaltonen, J., Koskinen, K. T. & Vilenius, M., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Tampere: Scandinavian International Conference on Fluid Power, p. 271-280 (Scandinavian International Conference on Fluid Power SICFP; vol. 12, no. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review

    Full text: ExLibris SFX link
  82. Published

    A review of automated boom control and vibration damping methods for mobile machines

    Honkakorpi, J., 2008, Fourth Arctic-Mediterranean Post Graduate Workshop on Intelligent Machines and Transport Systems, June 23-27, 2008, Saariselkä, Finland. Karvinen, T. & Keskinen, E. (eds.). p. 6 p

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific

    Full text: ExLibris SFX link
  83. Published

    Sensor module for hydraulic boom state feedback control

    Honkakorpi, J., Vihonen, J. & Mattila, J., 2012, In : International Journal of Fluid Power. 13, 3, p. 15-23

    Research output: Contribution to journal › Article › Scientific › peer-review

    Full text: ExLibris SFX link
  84. Published

    Mems Sensor Module for Hydraulic Boom State Feeedback Control

    Honkakorpi, J., Vihonen, J. & Mattila, J., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Sairala, H. & Koskinen, K. T. (eds.). Tampere: Scandinavian International Conference on Fluid Power, p. 393-404 (Scandinavian International Conference on Fluid Power SICFP).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review

    Full text: ExLibris SFX link
  85. Published

    Application of mems sensor fusion in hydraulic boom control

    Honkakorpi, J. & Mattila, J., 2010, Proceedings of the Post-Graduate Workshop on Intelligent Machines and Transport Systems, May 3-7, 2010, CERN, Switzerland. Karvinen, T. & Keskinen, E. (eds.). p. 1-11 11 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review

    Full text: ExLibris SFX link
  86. Published

    Energy efficient digital hydraulic force control

    Hopponen, V., Linjama, M., Ikonen, A., Rintamäki, P., Pietola, M. & Vilenius, M., 2009, The 11th Scandinavian International Conference on Fluid Power SICFP'09, Linköping, Sweden, June 2-4 2009. p. 11 p

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review

    Full text: ExLibris SFX link
  87. Published

    Koulutuksesta ja tutkimuksesta

    Huhtala, K., 2010, In : Fluid Finland. 9, 3-4, p. 6-6

    Research output: Contribution to journal › Article › Scientific

    Full text: ExLibris SFX link
  88. Published

    Emission of combustion engines - also a challenge to hydraulics

    Huhtala, K. & Vilenius, M., 2008, Proceedings of the 6th International Fluid Power Conference Dresden, Fluid Power in Motion, 6iFK, April 1.-2.2008, Dresden. p. 423-438

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review

    Full text: ExLibris SFX link
  89. Published

    Research platforms for future activities

    Huhtala, K., 2010, Proceedings of the 3rd GIM Scientific Workshop, February 17-18, 2010, Aalto University School of Science and Technology. Halme, A. & Pirttioja, T. (eds.). p. 1-16 16 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review

    Full text: ExLibris SFX link
  90. Published

    Towards intelligent mobile machines - GIM research

    Huhtala, K., Suomela, J., Vilenius, M. & Halme, A., 2008, Fluid Power and Motion Control FPMC 2008, 10-12 September 2008, Bath, UK. Johnston, D. N. & Plummer, A. R. (eds.). p. 277-290

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review

    Full text: ExLibris SFX link
  91. Published

    Diesel engine hydraulics

    Huhtala, K., 2008, Proceedings of the First Workshop on Digital Fluid Power 3rd October, 2008, Tampere, Finland. Linjama, M. & Laamanen, A. (eds.). p. 129-140

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific

    Full text: ExLibris SFX link
  92. Published

    Reitinvalintaa rastilta seuraavalle

    Huhtala, K., 2010, In : Fluid Finland. 3-4, p. 7-7

    Research output: Contribution to journal › Article › Scientific

    Full text: ExLibris SFX link
  93. Published

    IHA Department of Intelligent Hydraulics and Automation

    Huhtala, K. & Aunola, V., 2011, In : Fluid Finland. 10, 1, p. 10-11

    Research output: Contribution to journal › Article › Professional

    Full text: ExLibris SFX link
  94. Published

    Control of three-chamber cylinder with digital valve system

    Huova, M. & Laamanen, A., 2009, Proceedings of The Second Workshop on Digital Fluid Power 12-13 November 2009, Linz, Austria. Scheidl, R. & Winkler, B. (eds.). p. 94-105 12 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review

    Full text: ExLibris SFX link
  95. Published

    Improving resolution of digital hydraulic valve system by utilizing fast switching valves

    Huova, M. & Plöckinger, A., 2010, Proceedings of the Third Workshop on Digital Fluid Power, October 13-14 2010, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). p. 79-92

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review

    Full text: ExLibris SFX link
  96. Published

    Energy efficient digital hydraulic valve control

    Huova, M., 2011, GIM - Generic Intelligent Machines, The 4th GIM Scientific Workshop, January 18-19, 2011, Tampere University of Technology, Tampere, Finland. Tampere: Tampere University of Technology, p. 1-6 6 p. (GIM Scientific Workshop; vol. 4).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review

    Full text: ExLibris SFX link
  97. Published

    Simulations with fault-tolerant controller software of a digital valve

    Huova, M., Ketonen, M., Alexeev, P., Boström, P., Linjama, M., Walden, M. & Sere, K., 2012, Proceedings of the fifth workshop on digital fluid power, October 24-25, 2012, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). Tampere: Tampere University of Technology. Department of Intelligent Hydraulics and Automation, p. 223-242 (Digital fluid power).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review

    Full text: ExLibris SFX link
  98. Published

    Energy efficiency of three-chamber cylinder with digital valve system

    Huova, M., Laamanen, A. & Linjama, M., 2010, In : International Journal of Fluid Power. 11, 3, p. 15-22

    Research output: Contribution to journal › Article › Scientific › peer-review

    Full text: ExLibris SFX link
  99. Published

    Digital hydraulics in working actions in mobile machines

    Huova, M. & Karvonen, M., 2009, The Second Workshop on Generic Intelligent Machines, May 14-15, 2009, Tampere University of Technology, Tampere, Finland. Huhtala, K. & Uusi-Heikkilä, J. (eds.). p. 9 p

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review

    Full text: ExLibris SFX link
  100. Published

    Controller design of digital hydraulic flow control valve

    Huova, M., Plaska, M., Siivonen, L., Linjama, M., Walden, M., Vilenius, M. & Sere, K., 2009, The 11th Scandinavian International Conference on Fluid Power SICFP'09, Linköping, Sweden, June 2-4 2009. p. 15 p

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review

    Full text: ExLibris SFX link
Previous 1 2 3 4 Next

ID: 21447

View graph of relations

Tampere University of Technology is at the leading edge of technology development and a sought-after collaboration partner among the scientific and business communities. The University produces competent graduates who enter careers in the different sectors of society.

Quick links

Follow us

subscribe to the TUT science newsletter Interface