Tampere University of Technology

TUTCRIS Research Portal

Department of Intelligent Hydraulics and Automation

Research unit: Department

  1. 2007
  2. Published

    Development of water hydraulic remote handling system for divertor maintenance of ITER

    Muhammad, A., Esque, S., Mattila, J., Tolonen, M., Nieminen, P., Linna, O., Vilenius, M., Siuko, M., Palmer, J. & Irving, M., 2007, Proceedings of the 22nd IEEE/NPSS Symposium on Fusion Engineering - SOFE 07, Albuquerque, New Mexico, June 17-21, 2007. p. 4 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  3. Published

    Experimental and numerical analysis of the hydraulic circuit of a high pressure common rail diesel fuel injection system

    Beierer, P., 21 Dec 2007, Tampere: Tampere University of Technology. 198 p. (Tampere University of Technology. Publication; vol. 715)

    Research output: Book/ReportDoctoral thesisMonograph

  4. 2008
  5. Published

    Accurate flow control with digital valve system

    Siivonen, L., Linjama, M., Vilenius, M. & Anttonen, P., 2008, Proceedings of the 51st National Conference on Fluid Power March 12-14, 2008, IFPE 2008, Las Vegas, USA. p. 287-294

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  6. Published

    A hand-held remote control as a user interface for a hydraulic mobile machine with an excavator

    Uusisalo, J., Karhu, O. & Huhtala, K., 2008, Proceedings of the 51st National Conference on Fluid Power March 12-14, 2008, IFPE 2008, Las Vegas, USA. p. 405-411

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  7. Published

    A review of automated boom control and vibration damping methods for mobile machines

    Honkakorpi, J., 2008, Fourth Arctic-Mediterranean Post Graduate Workshop on Intelligent Machines and Transport Systems, June 23-27, 2008, Saariselkä, Finland. Karvinen, T. & Keskinen, E. (eds.). p. 6 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  8. Published

    Assisting force feedback function for hand-held remote control of excavator

    Uusisalo, J., Karhu, O. & Huhtala, K., 2008, Proceedings of the 7th JFPS International Symposium on Fluid Power, Toyama, September 15-18, 2008. Tanaka, Y. (ed.). p. 653-658

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  9. Published

    A survey on control of hydraulic servo systems

    Zhai, L. & Virvalo, T., 2008, Fourth Arctic-Mediterranean Post Graduate Workshop on Intelligent Machines and Transport Systems, June 23-27, 2008, Saariselkä, Finland. Karvinen, T. & Keskinen, E. (eds.). p. 5 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  10. Published

    Automatic testing in the integration phase of mobile work machine (TINAT) - MASIT31

    Multanen, P., Hyvönen, M., Ellman, A., Rantala, S. & Alanen, J., 2008, Tekes.

    Research output: Book/ReportCommissioned reportProfessional

  11. Published

    Autonomous excavation using hydraulic mobile machine retrofitted with electronic control system

    Karhu, O., Uusisalo, J., Honkakorpi, J. & Huhtala, K., 2008, Proceedings of the 7th JFPS International Symposium on Fluid Power, Toyama 2008, September 15-18, 2008. Tanaka, Y. (ed.). p. 359-362

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  12. Published

    Comparing controllers in pneumatic cylinder motion control

    Virvalo, T. & Mäkinen, E., 2008, Proceedings of the 6th International Fluid Power Conference Dresden, Fluid Power in Motion, 6iFK, April 1.-2.2008, Dresden. p. 289-304

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  13. Published

    Comparison of digital hydraulic and traditional servo system in demanding water hydraulic tracking control

    Linjama, M., Seppälä, J., Mattila, J. & Vilenius, M., 2008, Fluid Power and Motion Control FPMC 2008, 10-12 September 2008, Bath, UK. Johnston, D. N. & Plummer, A. R. (eds.). p. 393-403

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  14. Published

    Comparison of tracking controllers of hydraulic cylinder drive by simulations

    Virvalo, T., 2008, Proceedings of the 7th International Conference on Machine Automation ICMA2008, Service Robotics and Mechatronics, September 24-26, 2008, Awaji, Japan. p. 37-40

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  15. Published

    Comparison of vibration and pressure signals for fault detection on water hydraulic proportional valve

    Krogerus, T., Pietikäinen, J. & Koskinen, K. T., 2008, Proceedings of the 7th JFPS International Symposium on Fluid Power, Toyama, September 15-18, 2008. Tanaka, Y. (ed.). p. 691-696

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  16. Published

    Control and actuator synchronization of water hydraulic 6-DOF motion platform

    Sairiala, H., Rokala, M. & Koskinen, K. T., 2008, Proceedings of the 51st National Conference on Fluid Power March 12-14, 2008, IFPE 2008, Las Vegas, USA. p. 345-350

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  17. Published

    Detection of errors and failures using intelligent interface during a teleoperation process on skid steered mobile machine

    Javier, M., Karhu, O. I., Uusisalo, J. R. A. & Huhtala, K. J., 2008, 3rd IEEE Conference on Industrial Electronics and Applications ICIEA 2008, 3-5 June 2008, Singapore. p. 326-330

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  18. Published

    Development of a virtual environment for promoting safety in machine maintenance

    Lind, S., Leino, S-P., Viitaniemi, J., Helin, K., Multanen, P., Mäkiranta, A. & Heikkilä, J., 2008, Proceedings of the 6th International Conference on Occupational Risk Prevention, ORP´2008, A Coruña, Galicia, Spain, May 14th, 15th & 16th, 2008. Mondelo, P., Karwowski, W., Saarela, K., Hale, A. & Occipinti, E. (eds.). p. 14 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  19. Published

    Development of DTP2 subsystems and tooling in support of remote handling trials

    Mattila, J., 2008, Espoo: VTT. 7 p. (VTT Publications; vol. 678)

    Research output: Book/ReportCommissioned reportProfessional

  20. Published

    Diesel engine hydraulics

    Huhtala, K., 2008, Proceedings of the First Workshop on Digital Fluid Power 3rd October, 2008, Tampere, Finland. Linjama, M. & Laamanen, A. (eds.). p. 129-140

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  21. Published

    Digitaalihydrauliikan kuulumiset

    Linjama, M., 2008, In : Fluid Finland. 2, p. 8-10

    Research output: Contribution to journalArticleProfessional

  22. Published

    Digitaalihydrauliikan seminaarin suosio yllätti

    Linjama, M., 2008, In : Fluid Finland. 3, p. 36-37

    Research output: Contribution to journalArticleProfessional

  23. Published

    Digital hydraulics research at IHA

    Linjama, M., 2008, Proceedings of the First Workshop on Digital Fluid Power 3rd October, 2008, Tampere, Finland. Linjama, M. & Laamanen, A. (eds.). p. 7-30

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  24. Published

    Digital hydraulics - Towards perfect valve technology

    Linjama, M. & Vilenius, M., 2008, In : Ventil - Journal for Hydraulics, Automation and Mechatronics. 14, 2, p. 138-148

    Research output: Contribution to journalArticleScientificpeer-review

  25. Published

    Digital microhydraulics

    Linjama, M. & Karvonen, M., 2008, Proceedings of the First Workshop on Digital Fluid Power 3rd October, 2008, Tampere, Finland. Linjama, M. & Laamanen, A. (eds.). p. 141-152

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  26. Published

    Digital schlägt Analog um 40%

    Linjama, M., 2008, In : Fluid. 7-8/2008, p. 12-13

    Research output: Contribution to journalArticleProfessional

  27. Published

    Dynamic real-time simulation of intelligent mobile machines

    Multanen, P., Hyvönen, M., Saarinen, J. & Vilenius, M., 2008, Proceedings of the 27th IASTED International Conference Modelling, Identification, and Control, February 11-13, 2008, Innsbruck, Austria. p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  28. Published

    EFDA quality assurance exercise

    Mattila, J. & Järvenpää, J., 2008, Espoo: VTT. 2 p. (VTT Publications; vol. 678)

    Research output: Book/ReportCommissioned reportProfessional

  29. Published

    Emission of combustion engines - also a challenge to hydraulics

    Huhtala, K. & Vilenius, M., 2008, Proceedings of the 6th International Fluid Power Conference Dresden, Fluid Power in Motion, 6iFK, April 1.-2.2008, Dresden. p. 423-438

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  30. Published

    Etelä-Afrikan Tribologia 2008 -konferenssi

    Rinkinen, J. & Löppönen, M., 2008, In : Fluid Finland. p. 20-23

    Research output: Contribution to journalArticleProfessional

  31. Published

    Experiences and equipment in condition monitoring and in-line maintenance of oil

    Rinkinen, J. & Elo, L., 2008, Proceedings of the 8th International CJC Sales Meeting, May 13th-15th, 2008, Denmark. p. 56 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  32. Published

    Fault tolerant digital valve system and fault tolerant control

    Siivonen, L., 2008, Proceedings of the First Workshop on Digital Fluid Power 3rd October, 2008, Tampere, Finland. Linjama, M. & Laamanen, A. (eds.). p. 77-88

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  33. Published

    Force-based impedance control of hydraulic manipulators and its relationship with position-based impedance control

    Muhammad, A., Mattila, J., Virvalo, T. & Vilenius, M., 2008, Proceedings of the 7th International Conference on Machine Automation ICMA2008, Service Robotics and Mechatronics, September 24-26, 2008, Awaji, Japan. p. pp. 327

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  34. Published

    FPMC Symposiumi Iso-Britanniassa

    Elo, L., 2008, In : Fluid Finland. 3, p. 32-34

    Research output: Contribution to journalArticleProfessional

  35. Published

    Host activities in connection with the DTP2 test facility

    Järvenpää, J., Timperi, A., Tuominen, R. & Mattila, J., 2008, Espoo: VTT. 5 p. (VTT Publications; vol. 678)

    Research output: Book/ReportCommissioned reportProfessional

  36. Published

    Hydraulitekniikka (1. p.)

    Kauranne, H., Kajaste, J. & Vilenius, M., 2008, Helsinki: WSOY.

    Research output: Book/ReportBookScientificpeer-review

  37. Published

    Implementation of a DTP2 safety system for testing, and final CMM/SCEE integration and commissioning

    Mattila, J. & Järvenpää, J., 2008, Espoo: VTT. 3 p. (VTT Publications; vol. 678)

    Research output: Book/ReportCommissioned reportProfessional

  38. Published

    Improved positioning accuracy for a water hydraulic manipulator with state feedback controller

    Muhammad, A., Mattila, J., Virvalo, T. & Vilenius, M., 2008, Proceedings of the 7th International Conference on Machine Automation ICMA2008, Service Robotics and Mechatronics, September 24-26, 2008, Awaji, Japan. p. 321-326

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  39. Published

    Improvement in feedback signal quality for water hydraulic manipulator

    Muhammad, A., Mattila, J., Virvalo, T. & Vilenius, M., 2008, Fluid Power and Motion Control FPMC 2008, 10-12 September 2008, Bath, UK. Johnston, D. N. & Plummer, A. R. (eds.). p. 135-148

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  40. Published

    Improvement of total efficiency of hydrostatic transmission by using optimized control

    Ijas, M. & Mäkinen, E., 2008, Proceedings of the 7th JFPS International Symposium on Fluid Power, Toyama, September 15-18, 2008. Tanaka, Y. (ed.). p. 271-276

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  41. Published

    Improving the maintainability of elevators with virtual tools

    Multanen, P., Mäkiranta, A., Helin, K. & Lind, S., 2008, Proceedings of ELEVCON THESSALONIKI 2008, Elevator Technology 17, June 2008, Thessaloniki, Greece. Lustig, A. (ed.). p. 278-288

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  42. Published

    Life in the water hydraulics system

    Riipinen, H., 2008, Tampere: Tampere University of Technology. (Tampereen teknillinen yliopisto. Julkaisu; vol. 716)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  43. Published

    Modelling of hydraulics and mechanics of a mobile machine

    Vuohijoki, A., Hyvönen, M., Huhtala, K. & Vilenius, M., 2008, Fluid Power and Motion Control FPMC 2008, 10-12 September 2008, Bath, UK. Johnston, D. N. & Plummer, A. R. (eds.). p. 105-118 14 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  44. Published

    Nya standarder i Finland för hur industrihydrauliksystem skall upphandlas

    Rinkinen, J. & Viertävä, J., 2008, In : Fluid Scandinavica, Specialtidningen för hydraulik/pneumatik. 1, p. 35-36

    Research output: Contribution to journalArticleProfessional

  45. Published

    Online minimization of power losses in distributed digital hydraulic valve system

    Linjama, M., Huova, M. & Vilenius, M., 2008, Proceedings of the 6th International Fluid Power Conference Dresden, Fluid Power in Motion, 6iFK, April 1.-2.2008, Dresden. p. 157-171

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  46. Published

    On the flow and cavitation characteristics of water hydraulic seat valve structures

    Leino, T., 2008, Tampere: Tampere University of Technology. (Tampereen teknillinen yliopisto. Julkaisu; vol. 722)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  47. Published

    Proceedings of the First Workshop on Digital Fluid Power 3rd October, 2008 Tampere, Finland

    Linjama, M. (ed.) & Laamanen, A. (ed.), 2008, Tampere University of Technology.

    Research output: Book/ReportAnthologyScientificpeer-review

  48. Published

    Simulation as a tool for development of control and interface system module

    Hyvönen, M., Multanen, P. & Huhtala, K., 2008, 1st GIM Scientific Workshop at Helsinki University of Technology, 14.-15.8.2008. p. 87-91

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  49. Published

    Simulation model of hydraulic power transmission of teleoperated mobile machine and Development and Research Work of Advanced Velocity Control via Simulations

    Vilenius, J. & Huhtala, K., 2008, Proceedings of the 6th International Fluid Power Conference Dresden, Fluid Power in Motion, 6iFK, April 1.-2.2008, Dresden. p. 85-100

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  50. Published

    Software development and modelling of the CMM system

    Mattila, J., 2008, Espoo: VTT. 2 p. (VTT Publications; vol. 678)

    Research output: Book/ReportCommissioned reportProfessional

  51. Published

    Study of lubrication conditions in slipper-swashplate contact in water hydraulic axial piston pump test rig

    Rokala, M., Calonius, O., Koskinen, K. T. & Pietola, M., 2008, Proceedings of the 7th JFPS International Symposium on Fluid Power, September 15-18, 2008, Toyama, Japan. Tanaka, Y. (ed.). p. 91-94

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  52. Published

    Synchronization and more intelligent control in teleoperation process on skid steered mobile machine

    Moya, J. & Huhtala, K., 2008, ICARCV 2008, 2008 10th International Conference on Control, Automation, Robotics & Vision, Hanoi, Vietnam, 17-20 December 2008. p. 839-843

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  53. Published

    The means of optimizing digital valve system

    Laamanen, A., 2008, Proceedings of the First Workshop on Digital Fluid Power 3rd October, 2008, Tampere, Finland. Linjama, M. & Laamanen, A. (eds.). p. 89-99

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  54. Published

    Theoretical backround of a new reservoir design for circulating oil lubrication system

    Rinkinen, J., 2008, Ninth International Tribology Conference of the South Africa Institute of Tribology, 2-4 April 2008, Tribology 2008, SAIT. Vaal, PL. & Fuller, G. (eds.). p. 1-12 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  55. Published

    Towards intelligent mobile machines - GIM research

    Huhtala, K., Suomela, J., Vilenius, M. & Halme, A., 2008, Fluid Power and Motion Control FPMC 2008, 10-12 September 2008, Bath, UK. Johnston, D. N. & Plummer, A. R. (eds.). p. 277-290

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  56. Published

    Tribological conditions between swashplate and slipper pad in variable displacement water hydraulic axial piston unit

    Rokala, M., Calonius, O., Koskinen, K. T. & Pietola, M., 2008, Proceedings of the 6th International Fluid Power Conference Dresden, Fluid Power in Motion, 6iFK, April 1.-2.2008, Dresden. p. 301-314

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  57. Published

    Utilization of RFID and pressure sensor for intelligent hose condition monitoring

    Aarnio, A., Elo, L., Mäkinen, E., Ukkonen, L., Soini, M., Sydänheimo, L., Vilenius, M. & Kivikoski, M., 2008, Fluid Power and Motion Control FPMC 2008, 10-12 September 2008, Bath, UK. Johnston, D. N. & Plummer, A. R. (eds.). p. 27-40

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  58. Published

    Utilization of wireless battery-free sensors for hydraulic system condition monitoring

    Soini, M., Huvila, T., Mäkinen, E., Sydänheimo, L., Vilenius, M. & Kivikoski, M., 2008, Mechatronics 2008, Proceedings of the 11th Mechatronics Forum Biennial International Conference, University of Limerick, Ireland, 23-25.6.2008. Toal, D. (ed.). p. 6

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  59. Published

    Vesihydrauliikan kunnonvalvonta

    Riipinen, H., 2008, In : Fluid Finland. p. 12-14

    Research output: Contribution to journalArticleProfessional

  60. Published

    Vesihydrauliikan sovelluksia

    Sairiala, H. & Koskinen, K. T., 2008, In : Fluid Finland. p. 15-17

    Research output: Contribution to journalArticleProfessional

  61. Published

    Virtauksen perusilmiöt vesihydrauliikan istukkaventtiilissä

    Leino, T., 2008, In : Fluid Finland. 3, p. 12-15

    Research output: Contribution to journalArticleProfessional

  62. Published

    Virtual engineering and remote operation in design, training and completon of demanding maintenance work tasks in challenging industrial plants (VIRVO) - MASIT15

    Leino, S-P., Helin, K., Lind, S., Viitaniemi, H., Multanen, P., Mäkiranta, A., Lahtinen, J., Nuutinen, P., Heikkilä, J-M. & Martikainen, T., 2008, Tekes. 10 p.

    Research output: Book/ReportCommissioned reportProfessional

  63. Published

    Water hydraulic forklift with intelligent condition monitoring system

    Krogerus, T., Sairiala, H. & Koskinen, K. T., 2008, Proceedings of the 51st National Conference on Fluid Power March 12-14, 2008, IFPE 2008, Las Vegas, USA. p. 337-344

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  64. Published

    A new approach for numerical simulation of fluid power circuits using Rosenbrock methods

    Esque, S., 28 Nov 2008, Tampere: Tampere University of Technology. 125 p. (Tampere University of Technology. Publication; vol. 763)

    Research output: Book/ReportDoctoral thesisMonograph

  65. 2009
  66. Published

    2008-2009 Host Activities Related to DTP2 Test Facility Operation and Upgrade Preparation

    Siuko, M., Järvenpää, J. & Mattila, J., 2009, VTT. 10 p. (VTT Publications; vol. 709)

    Research output: Book/ReportCommissioned reportProfessional

  67. Published

    Adaption of virtual tools to support cost-effective maintenance of machines

    Multanen, P., Mäkiranta, A., Nuutinen, P., Leino, S-P., Helin, K. & Lind, S., 2009, 22nd International Congress Condition Monitoring and Diagnostic Engineering Management, Comadem, June 9-11 2009, San Sebastian, Spain. Arnaiz, A., Aranzabe, A. & Rao BKN, R. (eds.). p. 673-680

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  68. Published

    A general framework for multiple vehicle time-coordinated path following control

    Ghabcheloo, R., Kaminer, I., Aguiar, A. P. & Pascoal, A., 2009, Proceedings of the ACC 2009 - American Control Conference, St. Louis, Missouri, USA, 2009. p. 8 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  69. Published

    AMAD-painekytkimien laboratoriotestaus

    Hietala, J-P., 2009, Lentotekniikan rakennetutkimuksen neuvottelupäivät VII, 27.-28.8.2009, Tampere. Aaltonen, J. (ed.). p. 1-14 14 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  70. Published

    A mobile platform for remote inspection inside ESRF tunnel

    Chaize, J. M., Robinson, D., Hardy, L., Mattila, J. & Hahto, A., 2009, The International Conference on Accelerator and Large Experimental Physics Control Systems ICALEPCS 2009, October 12-16, 2009, Kobe, Japan. p. 3 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  71. Published

    Analysis and control of a high precision water hydraulic manipulator

    Zhai, L., Virvalo, T., Mattila, J. & Saarinen, H., 2009, The 11th Scandinavian International Conference on Fluid Power SICFP'09, Linköping, Sweden, June 2-4 2009. p. 11 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  72. Published

    A new approach for numerical simulation of fluid power circuits using Rosenbrock methods

    Esque, S., 2009, The Second Workshop on Generic Intelligent Machines, May 14-15, 2009, Tampere University of Technology, Tampere, Finland. Huhtala, K. & Uusi-Heikkilä, J. (eds.). p. 9 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  73. Published

    A new kind of piston pump to hydraulic power systems

    Uusi-Heikkilä, J., 2009, The Second Workshop on Generic Intelligent Machines, May 14-15, 2009, Tampere University of Technology, Tampere, Finland. Huhtala, K. & Uusi-Heikkilä, J. (eds.). p. 12 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  74. Published

    A novel symmetric and bistable seat valve

    Karvonen, M., Uusitalo, J-P., Ahola, V., Linjama, M. & Vilenius, M., 2009, The 11th Scandinavian International Conference on Fluid Power SICFP'09, Linköping, Sweden, June 2-4 2009. p. 14 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  75. Published

    Automaattinen öljyn epäpuhtauksien mittaus - hiukkausmittauksen periaatteet ja tekniikka v. 2009

    Multanen, P., Niiranen, E. & Rinkinen, J., 2009, PAMAS 2009 käyttäjäpäivät 10.-11.2.2009, Öljyjärjestelmien hiukkaslaskentakoulutus, Tampereen teknillinen yliopisto, Tampere, Finland. Rinkinen, J., Multanen, P., Elo, L. & Niiranen, E. (eds.). p. 62-85

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  76. Published

    Autonomous excavation

    Karhu, O., 2009, The Second Workshop on Generic Intelligent Machines, May 14-15, 2009, Tampere University of Technology, Tampere, Finland. Huhtala, K. & Uusi-Heikkilä, J. (eds.). p. 10 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  77. Published

    Autonomous motion control of a wheel loader

    Ghabcheloo, R., Hyvönen, M., Uusisalo, J., Karhu, O., Järä, J. & Huhtala, K., 2009, The Second Workshop on Generic Intelligent Machines, May 14-15, 2009, Tampere University of Technology, Tampere, Finland. Huhtala, K. & Uusi-Heikkilä, J. (eds.). p. 11 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  78. Published

    Autonomous motion control of a wheel loader

    Ghabcheloo, R., Hyvönen, M., Uusisalo, J., Karhu, O., Järä, J. & Huhtala, K., 2009, Proceedings of the ASME 2009 Dynamic Systems and Control Conference (DSCC2009), October 12-14, 2009, Hollywood, California, USA. p. 8 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  79. Published

    A virtual engineering based method for maintainability design

    Lind, S., Leino, S-P., Multanen, P., Mäkiranta, A. & Heikkilä, J., 2009, Maintenance Management Conference 2009, Fourth International Conference on Maintenance and Facility Management, Rome, Italy, 22-24.4.2009. p. 117-122

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  80. Published

    Collaboration with a multitasking service robot performing skilled tasks

    Heikkilä, M., 2009, In: Huhtala, K. & Uusi-Heikkilä, J. The Second Workshop on Generic Intelligent Machines, May 14-15, 2009, Tampere University of Technology, Tampere, Finland. p. 11 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  81. Published

    Combined application of product lifecycle and software configuration management systems for ITER remote handling

    Muhammad, A., Esque, S., Aha, L., Mattila, J., Siuko, M., Vilenius, M., Järvenpää, J., Irving, M., Damiani, C. & Semeraro, L., 2009, In : Fusion Engineering and Design. 84, 2-6, p. 1367-1371

    Research output: Contribution to journalArticleScientificpeer-review

  82. Published

    Comparison of control strategies of an electro hydraulic valve actuation system

    Herranen, M., Virvalo, T., Huhtala, K., Vilenius, M. & Liljenfeldt, G., 2009, SAE 2009 World Congress, Detroit, Michigan, April 20-23, 2009. p. 11 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  83. Published

    Contract-based design in controller development and its evaluation

    Boström, P., Plaska, M., Huova, M., Linjama, M., Heikkilä, M., Sere, K. & Walden, M., 2009, Nodes 09: Nordic workshop and doctoral symposium on Dependability and security, Linköping, Sweden, April 27, 2009. Asplund, M., Nadjm-Tehrani, S. & Petre, L. (eds.). p. 21-27

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  84. Published

    Controller design of digital hydraulic flow control valve

    Huova, M., Plaska, M., Siivonen, L., Linjama, M., Walden, M., Vilenius, M. & Sere, K., 2009, The 11th Scandinavian International Conference on Fluid Power SICFP'09, Linköping, Sweden, June 2-4 2009. p. 15 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  85. Published

    Control of three-chamber cylinder with digital valve system

    Huova, M. & Laamanen, A., 2009, Proceedings of The Second Workshop on Digital Fluid Power 12-13 November 2009, Linz, Austria. Scheidl, R. & Winkler, B. (eds.). p. 94-105 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  86. Published

    Coordinated path-following in the presence of communication losses and time delays

    Ghabcheloo, R., Aguiar, A. P., Pascoal, A., Silvestre, C., Kaminer, I. & Hespanha, J., 2009, In : SIAM Journal on Control and Optimization. 48, 1, p. 234-265

    Research output: Contribution to journalArticleScientificpeer-review

  87. Published

    Design and implementation of digital hydraulic synchronization and force control system

    Linjama, M., Hopponen, V., Ikonen, A., Rintamäki, P., Vilenius, M. & Pietola, M., 2009, The 11th Scandinavian International Conference on Fluid Power SICFP'09, Linköping, Sweden, June 2-4 2009. p. 13 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  88. Published

    Development and design optimization of water hydraulic manipulator for ITER

    Kekäläinen, T., Mattila, J. & Virvalo, T., 2009, In : Fusion Engineering and Design. Vol. 84, 2-6, p. 1010-1014

    Research output: Contribution to journalArticleScientificpeer-review

  89. Published

    Development of an intelligent control user interface for autonomous machines

    Järä, J. & Hyvönen, M., 2009, The Second Workshop on Generic Intelligent Machines, May 14-15, 2009, Tampere University of Technology, Tampere, Finland. Huhtala, K. & Uusi-Heikkilä, J. (eds.). p. 8 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  90. Published

    Digitaalisen mikrohydrauliikan sovellussatoa

    Linjama, M., 2009, In : Fluid Finland. 2/2009, p. 30-31

    Research output: Contribution to journalArticleProfessional

  91. Published

    Digital hydraulic pressure control

    Ijas, M., Mäkinen, E. & Linjama, M., 2009, The 11th Scandinavian International Conference on Fluid Power SICFP'09, Linköping, Sweden, June 2-4 2009. p. 12 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  92. Published

    Digital hydraulics in working actions in mobile machines

    Huova, M. & Karvonen, M., 2009, The Second Workshop on Generic Intelligent Machines, May 14-15, 2009, Tampere University of Technology, Tampere, Finland. Huhtala, K. & Uusi-Heikkilä, J. (eds.). p. 9 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  93. Published

    Digital pump-motor with independent outlets

    Linjama, M. & Huhtala, K., 2009, The 11th Scandinavian International Conference on Fluid Power SICFP'09, Linköping, Sweden, June 2-4 2009. p. 16 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  94. Published

    Dynamic analysis of a bistable actuator for digital hydraulics

    Uusitalo, J-P., Söderlund, L., Kettunen, L., Linjama, M. & Vilenius, M., 2009, In : IET Science Measurement and Technology. 3, 3, p. 235-243

    Research output: Contribution to journalArticleScientificpeer-review

  95. Published

    Effect of fluid properties on power system dynamics

    Karjalainen, J-P., 2009, The Second Workshop on Generic Intelligent Machines, May 14-15, 2009, Tampere University of Technology, Tampere, Finland. Huhtala, K. & Uusi-Heikkilä, J. (eds.). p. 6 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  96. Published

    Effects of remote control on usability of hydraulic excavator

    Uusisalo, J., Huhtala, K. & Vilenius, M., 2009, Proceedings of the ASME 2009 Dynamic Systems and Control Conference (DSCC2009) October 12-14, 2009, Hollywood, California, USA. p. 8 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  97. Published

    Energy efficient digital hydraulic force control

    Hopponen, V., Linjama, M., Ikonen, A., Rintamäki, P., Pietola, M. & Vilenius, M., 2009, The 11th Scandinavian International Conference on Fluid Power SICFP'09, Linköping, Sweden, June 2-4 2009. p. 11 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  98. Published

    Energy saving digital hydraulics

    Linjama, M., 2009, Proceedings of The Second Workshop on Digital Fluid Power, 12-13 November 2009, Linz, Austria. Scheidl, R. & Winkler, B. (eds.). p. 5-20

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  99. Published

    Enhanced industrial maintenance work task planning by using virtual engineering tools and haptic user interfaces

    Leino, S-P., Lind, S., Poyade, M., Kiviranta, S., Multanen, P., Reyes-Lecuona, A., Mäkiranta, A. & Muhammad, A., 2009, In : Lecture Notes in Computer Science. 5622, p. 346-354

    Research output: Contribution to journalArticleScientificpeer-review

  100. Published

    Experiences on the condition monitoring of military aircraft hydraulic systems

    Virta, P., Aaltonen, J., Koskinen, K. T. & Vilenius, M., 2009, The Sixth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, Dublin, Ireland, 23-25 June 2009. p. 753-764

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  101. Published

    Force-based and position-based impedance control of hydraulic manipulators

    Muhammad, A., Mattila, J., Virvalo, T. & Vilenius, M., 2009, The 11th Scandinavian International Conference on Fluid Power SICFP'09, Linköping, Sweden, June 2-4 2009. p. 15 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  102. Published

    Hydrauliikan online -kunnonvalvonta

    Virta, P., 2009, Lentotekniikan rakennetutkimuksen neuvottelupäivät VII, 27.-28.8.2009, Tampere. Aaltonen, J. (ed.). p. 1-11 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  103. Published

    Hydraulikomponenttien ja -järjestelmien puhtausvalvontastandardien nykytila

    Rinkinen, J., 2009, In : Fluid Finland. 3-4, p. 32-38

    Research output: Contribution to journalArticleProfessional

Previous 1 2 3 4 Next

ID: 21447