Tampere University of Technology

TUTCRIS Research Portal

Department of Intelligent Hydraulics and Automation

Research unit: Department

  1. Article › Scientific › Not peer-reviewed
  2. Published

    Discussion: Is the future of fluid power digital? Response

    Linjama, M., Scheidl, R. & Schmidt, S., 2012, In : Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering. 226, I6, p. 726-727

    Research output: Contribution to journalArticleScientific

  3. Published

    GVT-Getriebe mit hydrostatischer Verstelleinheit

    Erkkilä, M. & Viitasalo, V., 2010, In : Mobile Maschinen. 1/2010, p. 32-33

    Research output: Contribution to journalArticleScientific

  4. Published

    Hydrauliikan komponenttipuhtausstandardien hyödyntäminen suomalaisessa konepajateollisuudessa

    Rinkinen, J., 2010, In : Fluid Finland. 1/2010, p. 18-23

    Research output: Contribution to journalArticleScientific

  5. Published

    Hydraulikomponenttien käyttöikä

    Rinkinen, J. & Immonen, A., 2010, In : Fluid Finland. 1/2010, p. 8-11

    Research output: Contribution to journalArticleScientific

  6. Published

    Kehitystä putkistopassin koulutusmateriaaliin

    Rinkinen, J. & Virta, S., 2010, In : Fluid Finland. 1/2010, p. 28-30

    Research output: Contribution to journalArticleScientific

  7. Published

    Koulutuksesta ja tutkimuksesta

    Huhtala, K., 2010, In : Fluid Finland. 9, 3-4, p. 6-6

    Research output: Contribution to journalArticleScientific

  8. Published

    M1-teknologialla voidaan rakentaa virtuaalisia oppimisympäristöjä ja konelaboratorioita

    Koskinen, K. T., Leino, T., Palonen, T. & Ranta, P., 2010, In : Fluid Finland. 2/2010, p. 18-20

    Research output: Contribution to journalArticleScientific

  9. Published

    Matkaraportti: Digitaalihydrauliikan seminaari marraskuisessa Linzissä

    Linjama, M., 2010, In : Fluid Finland. 1/2010, p. 12-14

    Research output: Contribution to journalArticleScientific

  10. Published

    Reitinvalintaa rastilta seuraavalle

    Huhtala, K., 2010, In : Fluid Finland. 3-4, p. 7-7

    Research output: Contribution to journalArticleScientific

  11. Published

    The energy balance of the electro-hydraulic linear actuation system

    Herranen, M., Huhtala, K. & Vilenius, M., 2010, In : Journal of Energy and Power Engineering. 4, 8, p. 57-63

    Research output: Contribution to journalArticleScientific

  12. Article › Scientific › Peer-reviewed
  13. Published

    Advantage of redundancy in the controllability of remote handling manipulator

    Muhammad, A., Mattila, J., Vilenius, M., Siuko, M. & Semeraro, L., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 1882-1885

    Research output: Contribution to journalArticleScientificpeer-review

  14. Published

    Analysis of the new architecture proposal for the CMM control system

    Heikkilä, L., Saarinen, H., Aha, L., Viinikainen, M., Mattila, J., Hahto, A., Siuko, M. & Semeraro, L., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 2071-2074

    Research output: Contribution to journalArticleScientificpeer-review

  15. Published

    An implementation of a semantic, web-based virtual machine laboratory prototyping environment

    Salonen, J., Nykänen, O., Ranta, P., Nurmi, J., Helminen, M., Rokala, M., Palonen, T., Alarotu, V., Koskinen, K. & Pohjolainen, S., 2011, In : Lecture Notes in Computer Science. 7032, p. 221-236

    Research output: Contribution to journalArticleScientificpeer-review

  16. Published

    Automated object locator in a forest forwarder

    Hahto, A., Mattila, J. & Koivisto, H., 2010, In : Applied Artificial Intelligence. 24, 7, p. 711-721

    Research output: Contribution to journalArticleScientificpeer-review

  17. Published

    Calibration and compensation of deflections and compliances in remote handling equipment configurations

    Kivelä, T., Saarinen, H., Mattila, J., Hämäläinen, V., Siuko, M. & Semeraro, L., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 2043-2046

    Research output: Contribution to journalArticleScientificpeer-review

  18. Published

    Categorization of ITER remote handling operations

    Salminen, K., Aha, L., Saarinen, H., Siuko, M., Mattila, J. & Semeraro, L., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 2075-2077

    Research output: Contribution to journalArticleScientificpeer-review

  19. Published

    Combined application of product lifecycle and software configuration management systems for ITER remote handling

    Muhammad, A., Esque, S., Aha, L., Mattila, J., Siuko, M., Vilenius, M., Järvenpää, J., Irving, M., Damiani, C. & Semeraro, L., 2009, In : Fusion Engineering and Design. 84, 2-6, p. 1367-1371

    Research output: Contribution to journalArticleScientificpeer-review

  20. Published

    Command and Control application framework for interoperable heterogeneous ITER Remote Handling devices

    Tuominen, J., Muhammad, A., Mattila, J., Aha, L., Saarinen, H., Siuko, M., Hamilton, D. & Semerero, L., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 2067-2070

    Research output: Contribution to journalArticleScientificpeer-review

  21. Published

    Concept design of the cassette toroidal mover

    Mäkinen, H., Järvenpää, J., Valkama, P., Väyrynen, J., Amjad, F., Siuko, M., Mattila, J., Semeraro, L. & Esque, S., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 2092-2095

    Research output: Contribution to journalArticleScientificpeer-review

  22. Published

    Coordinated path-following in the presence of communication losses and time delays

    Ghabcheloo, R., Aguiar, A. P., Pascoal, A., Silvestre, C., Kaminer, I. & Hespanha, J., 2009, In : SIAM Journal on Control and Optimization. 48, 1, p. 234-265

    Research output: Contribution to journalArticleScientificpeer-review

  23. Published

    Data analysis process of working hydraulics of small mobile machine

    Krogerus, T., Rokala, M. & Koskinen, K. T., 2012, In : International Journal of Fluid Power. 13, 3, p. 5-15

    Research output: Contribution to journalArticleScientificpeer-review

  24. Published

    Department of Intelligent Hydraulics and Automation, Tampere University of Technology, Finland

    Koskinen, K. T., 2010, In : Journal of the Japan Fluid Power System Society. 41, 1, p. 35-40

    Research output: Contribution to journalArticleScientificpeer-review

  25. Published

    Detection and isolation of leakage and valve faults in hydraulic systems in varying loading conditions, Part 1: Global sensitivity analysis

    Nurmi, J. & Mattila, J., 2011, In : International Journal of Fluid Power. 12, 3, p. 41-51

    Research output: Contribution to journalArticleScientificpeer-review

  26. Published

    Detection and isolation of leakage and valve faults in hydraulic systems in varying loading conditions, Part 2: Fault detection and isolation scheme

    Nurmi, J. & Mattila, J., 2012, In : International Journal of Fluid Power. 13, 1, p. 17-27

    Research output: Contribution to journalArticleScientificpeer-review

  27. Published

    Development and design optimization of water hydraulic manipulator for ITER

    Kekäläinen, T., Mattila, J. & Virvalo, T., 2009, In : Fusion Engineering and Design. Vol. 84, 2-6, p. 1010-1014

    Research output: Contribution to journalArticleScientificpeer-review

  28. Published

    Digital hydraulics - Towards perfect valve technology

    Linjama, M. & Vilenius, M., 2008, In : Ventil - Journal for Hydraulics, Automation and Mechatronics. 14, 2, p. 138-148

    Research output: Contribution to journalArticleScientificpeer-review

  29. Published

    DTP2 control room operator and remote handing operation designer responsibilities and information available to them

    Aha, L., Salminen, K., Hahto, A., Saarinen, H., Mattila, J., Siuko, M. & Semeraro, L., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 2078-2081

    Research output: Contribution to journalArticleScientificpeer-review

  30. Published

    Dynamic analysis of a bistable actuator for digital hydraulics

    Uusitalo, J-P., Söderlund, L., Kettunen, L., Linjama, M. & Vilenius, M., 2009, In : IET Science Measurement and Technology. 3, 3, p. 235-243

    Research output: Contribution to journalArticleScientificpeer-review

  31. Published

    Energy efficiency of three-chamber cylinder with digital valve system

    Huova, M., Laamanen, A. & Linjama, M., 2010, In : International Journal of Fluid Power. 11, 3, p. 15-22

    Research output: Contribution to journalArticleScientificpeer-review

  32. Published

    Enhanced industrial maintenance work task planning by using virtual engineering tools and haptic user interfaces

    Leino, S-P., Lind, S., Poyade, M., Kiviranta, S., Multanen, P., Reyes-Lecuona, A., Mäkiranta, A. & Muhammad, A., 2009, In : Lecture Notes in Computer Science. 5622, p. 346-354

    Research output: Contribution to journalArticleScientificpeer-review

  33. Published

    Genetic optimization of a fast solenoid actuator for a digital hydraulic valve

    Pellikka, M., Ahola, V., Söderlund, L. & Uusitalo, J-P., 2011, In : International Journal of Fluid Power. 12, 2, p. 49-56

    Research output: Contribution to journalArticleScientificpeer-review

  34. Published

    Is the future of fluid power digital?

    Scheidl, R., Linjama, M. & Schmidt, S., 2012, In : Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering. 226, 6, p. 721-723

    Research output: Contribution to journalArticleScientificpeer-review

  35. Published

    Jammed on/off valve fault compensation with distributed digital valve system

    Siivonen, L., Linjama, M., Huova, M. & Vilenius, M., 2009, In : International Journal of Fluid Power. 10, 2, p. 73-82

    Research output: Contribution to journalArticleScientificpeer-review

  36. Published

    Measuring and Modelling Hydraulic Fluid Dynamics at High Pressure - Accurate and Simple Approach

    Karjalainen, J-P., Karjalainen, R. & Huhtala, K., 2012, In : International Journal of Fluid Power. 13, 2, p. 51-59

    Research output: Contribution to journalArticleScientificpeer-review

  37. Published

    Minimizing the Maximum Curvature of Quadratic Bezier Curves with a Tetragonal Concave Polygonal Boundary Constraint

    Choi, J., Curry, R. E. & Elkaim, G. H., 2011, In : Computer-Aided Design. 44, 4, p. 1-22 22 p.

    Research output: Contribution to journalArticleScientificpeer-review

  38. Published

    Moisture and Bio-deterioration Risk of Building Materials and Structures

    Viitanen, H., Vinha, J., Salminen, K., Ojanen, T., Peuhkuri, R., Paajanen, L. & Lähdesmäki, K., 2010, In : Journal of Building Physics. 33, 3, p. 201-224 24 p.

    Research output: Contribution to journalArticleScientificpeer-review

  39. Published

    Novel bistable hammer valve for digital hydraulics

    Uusitalo, J-P., Ahola, V., Söderlund, L., Linjama, M., Juhola, M. & Kettunen, L., 2010, In : International Journal of Fluid Power. 11, 3, p. 35-44

    Research output: Contribution to journalArticleScientificpeer-review

  40. Published

    On design and development of additional End-Effectors for the Cassette Multifunctional Mover

    Valkama, P., Mattila, J., Amjad, F., Väyrynen, J., Vilenius, M., Siuko, M., Semeraro, L. & Esque, S., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 1946-1949

    Research output: Contribution to journalArticleScientificpeer-review

  41. Published

    Optimized hardware design for the divertor remote handling control system

    Saarinen, H., Tiitinen, J., Aha, L., Muhammad, A., Mattila, J., Siuko, M., Vilenius, M., Järvenpää, J., Irving, M., Damiani, C. & Semeraro, L., 2009, In : Fusion Engineering and Design. 84, 2-6, p. 1666-1670

    Research output: Contribution to journalArticleScientificpeer-review

  42. Published

    Predicting the runtime reliability of ITER Remote Handling maintenance equipment

    Väyrynen, J., Mattila, J., Vilenius, M., Ali, M., Valkama, P., Siuko, M. & Semeraro, L., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 2012-2015

    Research output: Contribution to journalArticleScientificpeer-review

  43. Published

    Real-time markerless Augmented Reality for Remote Handling system in bad viewing conditions

    Ziaei, Z., Hahto, A., Mattila, J., Siuko, M. & Semeraro, L., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 2033-2038

    Research output: Contribution to journalArticleScientificpeer-review

  44. Published

    Results of CMM standalone tests at DTP2

    Saarinen, H., Kivelä, T., Zhai, L., Hämäläinen, V., Karjalainen, J-P., Aha, L., Heikkilä, L., Mäkinen, H., Järvenpää, J., Kiviranta, S., Krassi, B., Viinikainen, M., Siuko, M., Mattila, J., Esque, S. & Semeraro, L., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 1907-1910

    Research output: Contribution to journalArticleScientificpeer-review

  45. Published

    Robust control of Cassette Multi-functional Mover for ITER remote handling tasks

    Zhai, L., Mattila, J., Saarinen, H. & Virvalo, T., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 2008-2011

    Research output: Contribution to journalArticleScientificpeer-review

  46. Published

    Sensor module for hydraulic boom state feedback control

    Honkakorpi, J., Vihonen, J. & Mattila, J., 2012, In : International Journal of Fluid Power. 13, 3, p. 15-23

    Research output: Contribution to journalArticleScientificpeer-review

  47. Published

    Supervisory system for DTP2 remote handling operations

    Hahto, A., Aha, L., Nurminen, T., Aaltonen, A., Heikkilä, L., Mattila, J., Siuko, M., Saarinen, H. & Semeraro, L., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 2047-2050

    Research output: Contribution to journalArticleScientificpeer-review

  48. Published

    The use of digital mock-ups on the development of the divertor test platform 2

    Esque, S., Mattila, J., Siuko, M., Vilenius, M., Järvenpää, J., Semeraro, L., Irving, M. & Damiani, C., 2009, In : Fusion Engineering and Design. 84, 2-6, p. 752-756

    Research output: Contribution to journalArticleScientificpeer-review

  49. Published

    Unified software development approach for the safety-critical ITER maintenance devices

    Aha, L., Saarinen, H., Tiitinen, J., Muhammad, A., Mattila, J., Siuko, M., Vilenius, M., Järvenpää, J., Irving, M., Damiani, C. & Semeraro, L., 2009, In : Fusion Engineering and Design. 84, 2-6, p. 369-374

    Research output: Contribution to journalArticleScientificpeer-review

  50. Published

    Validation of divertor cassette locking system with a hydraulic jack tool

    Takalo, V., Esque, S., Mattila, J., Vilenius, M., Järvenpää, J., Siuko, M., Semeraro, L., Irving, M. & Damiani, C., 2009, In : Fusion Engineering and Design. 84, 2-6, p. 1808-1812

    Research output: Contribution to journalArticleScientificpeer-review

  51. Published

    Water hydraulic manipulator for fail safe and fault tolerant remote handling operations at ITER

    Nieminen, P., Esque, S., Muhammad, A., Mattila, J., Väyrynen, J., Siuko, M. & Vilenius, M., 2009, In : Fusion Engineering and Design. 84, 2-6, p. 1420-1424

    Research output: Contribution to journalArticleScientificpeer-review

  52. Published

    What do information reuse and automated processing require in engineering design? Semantic process

    Nykänen, O., Salonen, J., Markkula, M., Ranta, P., Rokala, M., Helminen, M., Alarotu, V., Nurmi, J., Palonen, T., Koskinen, K. T. & Pohjolainen, S., 2011, In : Journal of Industrial Engineering and Management. 4, 4, 329.

    Research output: Contribution to journalArticleScientificpeer-review

  53. Article › Professional
  54. Published

    Digitaalihydrauliikan kuulumiset

    Linjama, M., 2008, In : Fluid Finland. 2, p. 8-10

    Research output: Contribution to journalArticleProfessional

  55. Published

    Digitaalihydrauliikan seminaarin suosio yllätti

    Linjama, M., 2008, In : Fluid Finland. 3, p. 36-37

    Research output: Contribution to journalArticleProfessional

  56. Published

    Digitaalihydrauliikka tulee!

    Linjama, M., 2010, In : Metsäalan ammattilehti. 5, p. 88-89

    Research output: Contribution to journalArticleProfessional

  57. Published

    Digitaalinen Hydraulisäätö - tulevaisuuden tekniikkaa?

    Siivonen, L., 2012, In : Promaint. 26, 7, p. 41-43

    Research output: Contribution to journalArticleProfessional

  58. Published

    Digitaalisen mikrohydrauliikan sovellussatoa

    Linjama, M., 2009, In : Fluid Finland. 2/2009, p. 30-31

    Research output: Contribution to journalArticleProfessional

  59. Published

    Digital schlägt Analog um 40%

    Linjama, M., 2008, In : Fluid. 7-8/2008, p. 12-13

    Research output: Contribution to journalArticleProfessional

  60. Published

    Elintarviketeollisuuden koneautomaation kehitys kaipaa tiivistämistä

    Sairiala, H. & Koskinen, K. T., 2012, In : Kehittyvä elintarvike. 23, 4, p. 12-13

    Research output: Contribution to journalArticleProfessional

  61. Published

    Etelä-Afrikan Tribologia 2008 -konferenssi

    Rinkinen, J. & Löppönen, M., 2008, In : Fluid Finland. p. 20-23

    Research output: Contribution to journalArticleProfessional

  62. Published

    Experiences of monitoring the condition of military aircraft hydraulic systems

    Virta, P., Aaltonen, J., Koskinen, K. T. & Vilenius, M., 2010, In : Condition Monitor. 280, p. 9-14

    Research output: Contribution to journalArticleProfessional

  63. Published

    FPMC Symposiumi Iso-Britanniassa

    Elo, L., 2008, In : Fluid Finland. 3, p. 32-34

    Research output: Contribution to journalArticleProfessional

  64. Published

    Hiukkasen puhtaammaksi -laboratorio hydraulikomponenttien puhtaustutkimuksiin

    Kuosku, M. & Rinkinen, J., 2011, In : Promaint. 25, 5, p. 42-45

    Research output: Contribution to journalArticleProfessional

  65. Published

    Hydrauliikan aika ei ole ohi - The time of hydraulics is not over

    Linjama, M., 2012, In : Fluid Finland. 11, 2, p. 10-12

    Research output: Contribution to journalArticleProfessional

  66. Published

    Hydrauliikan vianetsintä -säästöä systemaattisella toiminnalla

    Törmänen, R., Räihä, K. & Rinkinen, J., 2011, In : Promaint. 25, 5, p. 50-53 4 p.

    Research output: Contribution to journalArticleProfessional

  67. Published

    Hydraulikomponenttien ja -järjestelmien puhtausvalvontastandardien nykytila

    Rinkinen, J., 2009, In : Fluid Finland. 3-4, p. 32-38

    Research output: Contribution to journalArticleProfessional

  68. Published

    IHA Department of Intelligent Hydraulics and Automation

    Huhtala, K. & Aunola, V., 2011, In : Fluid Finland. 10, 1, p. 10-11

    Research output: Contribution to journalArticleProfessional

  69. Published

    IHA digitaalihydrauliikalla maailman ykköseksi

    Vilenius, M., 2009, In : Fluid Finland. p. s. 5

    Research output: Contribution to journalArticleProfessional

  70. Published

    Nya standarder i Finland för hur industrihydrauliksystem skall upphandlas

    Rinkinen, J. & Viertävä, J., 2008, In : Fluid Scandinavica, Specialtidningen för hydraulik/pneumatik. 1, p. 35-36

    Research output: Contribution to journalArticleProfessional

  71. Published

    Puhtauden valvonta kehittyy

    Rinkinen, J., 2009, In : Promaint. 5/2009, p. 48-53

    Research output: Contribution to journalArticleProfessional

  72. Published

    Putkistopasseja TTY/IHA:n henkilökunnalle

    Rinkinen, J., 2009, In : Fluid Finland. 2/2009, p. 24-27

    Research output: Contribution to journalArticleProfessional

  73. Published

    Recent advances in standardisation and education of fluid power in Finland

    Rinkinen, J., Lahtinen, J. & Virta, S., 2011, In : Maintworld, Maintenance & Asset Management. 3, 2, p. 14-18

    Research output: Contribution to journalArticleProfessional

  74. Published

    Tavoitteena häviötön hydrauliikka

    Linjama, M., 2009, In : Fluid Finland. 3-4, p. 12-17

    Research output: Contribution to journalArticleProfessional

  75. Published

    Väitöskirjan esittely. Nopeutta virtuaalisuunnitteluun uudella integrointialgoritmilla. Rosenbrockin menetelmä on uusi hydraulipiirien numeerisen simuloinnin lähestymistapa

    Esque, S., 2009, In : Fluid Finland. 1/2009, p. 8-11

    Research output: Contribution to journalArticleProfessional

  76. Published

    Versatile maintenance solutions in oil related systems

    Rinkinen, J., 2011, In : Condition Monitor. 296, p. 5-12

    Research output: Contribution to journalArticleProfessional

  77. Published

    Vesihydrauliikan kunnonvalvonta

    Riipinen, H., 2008, In : Fluid Finland. p. 12-14

    Research output: Contribution to journalArticleProfessional

  78. Published

    Vesihydrauliikan sovelluksia

    Sairiala, H. & Koskinen, K. T., 2008, In : Fluid Finland. p. 15-17

    Research output: Contribution to journalArticleProfessional

  79. Published

    Virtauksen perusilmiöt vesihydrauliikan istukkaventtiilissä

    Leino, T., 2008, In : Fluid Finland. 3, p. 12-15

    Research output: Contribution to journalArticleProfessional

  80. Chapter › Scientific › Peer-reviewed
  81. Published

    Development of Controllers Using Simulink and Contract-Based Design. Chapter 8

    Boström, P., Huova, M., Olszewska, M., Linjama, M., Heikkilä, M., Sere, K. & Walden, M., 2011, Dependability and Computer Engineering: Concepts for Software-Intensive Systems. Petre, L., Sere, K. & Troubitsyna, E. (eds.). Hershey, PA: IGI Global, p. 151-169

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  82. Published

    Water Hydraulic

    Koskinen, K. T. & Vilenius, M., 2011, Handbook of Hydraulic Fluid Technology. Totten, G. E. & De Negri, V. J. (eds.). Boca Raton,FL: CRC Press, p. 723-757

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  83. Conference contribution › Scientific › Not peer-reviewed
  84. Published

    A mobile platform for remote inspection inside ESRF tunnel

    Chaize, J. M., Robinson, D., Hardy, L., Mattila, J. & Hahto, A., 2009, The International Conference on Accelerator and Large Experimental Physics Control Systems ICALEPCS 2009, October 12-16, 2009, Kobe, Japan. p. 3 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  85. Published

    A New Method and Format for Describing CANopen System Topology

    Helminen, M., Salonen, J., Saha, H., Nykänen, O., Koskinen, K. T., Ranta, P. & Pohjolainen, S., 2012, Proceedings of the 13th International CAN Conference, iCC 2012 in Hambach Castle, March 5 to March 6, Germany. CAN in Automation e.V., p. 1-8 8 p. (International CAN Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  86. Published

    A review of automated boom control and vibration damping methods for mobile machines

    Honkakorpi, J., 2008, Fourth Arctic-Mediterranean Post Graduate Workshop on Intelligent Machines and Transport Systems, June 23-27, 2008, Saariselkä, Finland. Karvinen, T. & Keskinen, E. (eds.). p. 6 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  87. Published

    A survey on control of hydraulic servo systems

    Zhai, L. & Virvalo, T., 2008, Fourth Arctic-Mediterranean Post Graduate Workshop on Intelligent Machines and Transport Systems, June 23-27, 2008, Saariselkä, Finland. Karvinen, T. & Keskinen, E. (eds.). p. 5 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  88. Published

    Automaattinen öljyn epäpuhtauksien mittaus - hiukkausmittauksen periaatteet ja tekniikka v. 2009

    Multanen, P., Niiranen, E. & Rinkinen, J., 2009, PAMAS 2009 käyttäjäpäivät 10.-11.2.2009, Öljyjärjestelmien hiukkaslaskentakoulutus, Tampereen teknillinen yliopisto, Tampere, Finland. Rinkinen, J., Multanen, P., Elo, L. & Niiranen, E. (eds.). p. 62-85

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  89. Published

    Concept of the electro-water-hydraulic hybrid mobile machine

    Aaltonen, J., Sairiala, H. & Koskinen, K. T., 2012, Topic water hydraulics, Dutch Fluid Power Conference, Ede, The Netherlands 13th September 2012. p. 97-111 15 p. (Dutch Fluid Power Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  90. Published

    Diesel engine hydraulics

    Huhtala, K., 2008, Proceedings of the First Workshop on Digital Fluid Power 3rd October, 2008, Tampere, Finland. Linjama, M. & Laamanen, A. (eds.). p. 129-140

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  91. Published

    Digital hydraulics research at IHA

    Linjama, M., 2008, Proceedings of the First Workshop on Digital Fluid Power 3rd October, 2008, Tampere, Finland. Linjama, M. & Laamanen, A. (eds.). p. 7-30

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  92. Published

    Digital microhydraulics

    Linjama, M. & Karvonen, M., 2008, Proceedings of the First Workshop on Digital Fluid Power 3rd October, 2008, Tampere, Finland. Linjama, M. & Laamanen, A. (eds.). p. 141-152

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  93. Published

    Fault tolerant digital valve system and fault tolerant control

    Siivonen, L., 2008, Proceedings of the First Workshop on Digital Fluid Power 3rd October, 2008, Tampere, Finland. Linjama, M. & Laamanen, A. (eds.). p. 77-88

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  94. Published

    Hydraulikomponenttien puhtausvalvontastandardien nykytilanne

    Rinkinen, J., 2009, PAMAS 2009 käyttäjäpäivät 10.-11.2.2009, Öljyjärjestelmien hiukkaslaskentakoulutus, Tampereen teknillinen yliopisto, Tampere, Finland. Rinkinen, J., Multanen, P., Elo, L. & Niiranen, E. (eds.). p. 134-160

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  95. Published

    Öljynäytteiden hiukkaslaskennan tärkeimmät standardit

    Niiranen, E., Elo, L. & Multanen, P., 2009, PAMAS 2009 käyttäjäpäivät 10.-11.2.2009, Öljyjärjestelmien hiukkaslaskentakoulutus, Tampereen teknillinen yliopisto, Tampere, Finland. Rinkinen, J., Multanen, P., Elo, L. & Niiranen, E. (eds.). p. 47-61

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  96. Published

    Proportional valve control of water-hydraulic systems

    Sairiala, H. & Koskinen, K. T., 2012, Topic water hydraulics, Dutch Fluid Power Conference, Ede, The Netherlands 13th September 2012. Vereniging Platform Hydrauliek, p. 49-63 (Dutch Fluid Power Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  97. Published

    Puhtauden mittauksen erityispiirteet sotilaslentokoneissa

    Aaltonen, J., 2009, PAMAS 2009 käyttäjäpäivät 10.-11.2.2009, Öljyjärjestelmien hiukkaslaskentakoulutus, Tampereen teknillinen yliopisto, Tampere, Finland. Rinkinen, J., Multanen, P., Elo, L. & Niiranen, E. (eds.). p. 121-127

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  98. Published

    Simulation as a tool for development of control and interface system module

    Hyvönen, M., Multanen, P. & Huhtala, K., 2008, 1st GIM Scientific Workshop at Helsinki University of Technology, 14.-15.8.2008. p. 87-91

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  99. Published

    The means of optimizing digital valve system

    Laamanen, A., 2008, Proceedings of the First Workshop on Digital Fluid Power 3rd October, 2008, Tampere, Finland. Linjama, M. & Laamanen, A. (eds.). p. 89-99

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  100. Published

    Turvallisuus hydraulijärjestelmän öljynäytteenotossa ja mittauksessa

    Karjalainen, R., 2009, PAMAS 2009 käyttäjäpäivät 10.-11.2.2009, Öljyjärjestelmien hiukkaslaskentakoulutus, Tampereen teknillinen yliopisto, Tampere, Finland. Rinkinen, J., Multanen, P., Elo, L. & Niiranen, E. (eds.). p. 116-120

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  101. Conference contribution › Scientific › Peer-reviewed
  102. Published

    Accurate flow control with digital valve system

    Siivonen, L., Linjama, M., Vilenius, M. & Anttonen, P., 2008, Proceedings of the 51st National Conference on Fluid Power March 12-14, 2008, IFPE 2008, Las Vegas, USA. p. 287-294

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  103. Published

    Adaption of virtual tools to support cost-effective maintenance of machines

    Multanen, P., Mäkiranta, A., Nuutinen, P., Leino, S-P., Helin, K. & Lind, S., 2009, 22nd International Congress Condition Monitoring and Diagnostic Engineering Management, Comadem, June 9-11 2009, San Sebastian, Spain. Arnaiz, A., Aranzabe, A. & Rao BKN, R. (eds.). p. 673-680

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  104. Published

    Adaptive dead zone compensation of proportional mobile valve

    Kivelä, T. & Mattila, J., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Sairala, H. & Koskinen, K. T. (eds.). Tampere: Scandinavian International Conference on Fluid Power, p. 411-422 (Scandinavian International Conference on Fluid Power SICFP; vol. 12, no. 3).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  105. Published

    A general framework for multiple vehicle time-coordinated path following control

    Ghabcheloo, R., Kaminer, I., Aguiar, A. P. & Pascoal, A., 2009, Proceedings of the ACC 2009 - American Control Conference, St. Louis, Missouri, USA, 2009. p. 8 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  106. Published

    A hand-held remote control as a user interface for a hydraulic mobile machine with an excavator

    Uusisalo, J., Karhu, O. & Huhtala, K., 2008, Proceedings of the 51st National Conference on Fluid Power March 12-14, 2008, IFPE 2008, Las Vegas, USA. p. 405-411

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Previous 1 2 3 4 Next

ID: 21447