Tampere University of Technology

TUTCRIS Research Portal

Department of Intelligent Hydraulics and Automation

Research unit: Department

  1. 2009
  2. Published

    Collaboration with a multitasking service robot performing skilled tasks

    Heikkilä, M., 2009, In: Huhtala, K. & Uusi-Heikkilä, J. The Second Workshop on Generic Intelligent Machines, May 14-15, 2009, Tampere University of Technology, Tampere, Finland. p. 11 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  3. Published

    Combined application of product lifecycle and software configuration management systems for ITER remote handling

    Muhammad, A., Esque, S., Aha, L., Mattila, J., Siuko, M., Vilenius, M., Järvenpää, J., Irving, M., Damiani, C. & Semeraro, L., 2009, In : Fusion Engineering and Design. 84, 2-6, p. 1367-1371

    Research output: Contribution to journalArticleScientificpeer-review

  4. Published

    Comparison of control strategies of an electro hydraulic valve actuation system

    Herranen, M., Virvalo, T., Huhtala, K., Vilenius, M. & Liljenfeldt, G., 2009, SAE 2009 World Congress, Detroit, Michigan, April 20-23, 2009. p. 11 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  5. Published

    Contract-based design in controller development and its evaluation

    Boström, P., Plaska, M., Huova, M., Linjama, M., Heikkilä, M., Sere, K. & Walden, M., 2009, Nodes 09: Nordic workshop and doctoral symposium on Dependability and security, Linköping, Sweden, April 27, 2009. Asplund, M., Nadjm-Tehrani, S. & Petre, L. (eds.). p. 21-27

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  6. Published

    Controller design of digital hydraulic flow control valve

    Huova, M., Plaska, M., Siivonen, L., Linjama, M., Walden, M., Vilenius, M. & Sere, K., 2009, The 11th Scandinavian International Conference on Fluid Power SICFP'09, Linköping, Sweden, June 2-4 2009. p. 15 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  7. Published

    Control of three-chamber cylinder with digital valve system

    Huova, M. & Laamanen, A., 2009, Proceedings of The Second Workshop on Digital Fluid Power 12-13 November 2009, Linz, Austria. Scheidl, R. & Winkler, B. (eds.). p. 94-105 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  8. Published

    Coordinated path-following in the presence of communication losses and time delays

    Ghabcheloo, R., Aguiar, A. P., Pascoal, A., Silvestre, C., Kaminer, I. & Hespanha, J., 2009, In : SIAM Journal on Control and Optimization. 48, 1, p. 234-265

    Research output: Contribution to journalArticleScientificpeer-review

  9. Published

    Design and implementation of digital hydraulic synchronization and force control system

    Linjama, M., Hopponen, V., Ikonen, A., Rintamäki, P., Vilenius, M. & Pietola, M., 2009, The 11th Scandinavian International Conference on Fluid Power SICFP'09, Linköping, Sweden, June 2-4 2009. p. 13 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  10. Published

    Development and design optimization of water hydraulic manipulator for ITER

    Kekäläinen, T., Mattila, J. & Virvalo, T., 2009, In : Fusion Engineering and Design. Vol. 84, 2-6, p. 1010-1014

    Research output: Contribution to journalArticleScientificpeer-review

  11. Published

    Development of an intelligent control user interface for autonomous machines

    Järä, J. & Hyvönen, M., 2009, The Second Workshop on Generic Intelligent Machines, May 14-15, 2009, Tampere University of Technology, Tampere, Finland. Huhtala, K. & Uusi-Heikkilä, J. (eds.). p. 8 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  12. Published

    Digitaalisen mikrohydrauliikan sovellussatoa

    Linjama, M., 2009, In : Fluid Finland. 2/2009, p. 30-31

    Research output: Contribution to journalArticleProfessional

  13. Published

    Digital hydraulic pressure control

    Ijas, M., Mäkinen, E. & Linjama, M., 2009, The 11th Scandinavian International Conference on Fluid Power SICFP'09, Linköping, Sweden, June 2-4 2009. p. 12 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  14. Published

    Digital hydraulics in working actions in mobile machines

    Huova, M. & Karvonen, M., 2009, The Second Workshop on Generic Intelligent Machines, May 14-15, 2009, Tampere University of Technology, Tampere, Finland. Huhtala, K. & Uusi-Heikkilä, J. (eds.). p. 9 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  15. Published

    Digital pump-motor with independent outlets

    Linjama, M. & Huhtala, K., 2009, The 11th Scandinavian International Conference on Fluid Power SICFP'09, Linköping, Sweden, June 2-4 2009. p. 16 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  16. Published

    Dynamic analysis of a bistable actuator for digital hydraulics

    Uusitalo, J-P., Söderlund, L., Kettunen, L., Linjama, M. & Vilenius, M., 2009, In : IET Science Measurement and Technology. 3, 3, p. 235-243

    Research output: Contribution to journalArticleScientificpeer-review

  17. Published

    Effect of fluid properties on power system dynamics

    Karjalainen, J-P., 2009, The Second Workshop on Generic Intelligent Machines, May 14-15, 2009, Tampere University of Technology, Tampere, Finland. Huhtala, K. & Uusi-Heikkilä, J. (eds.). p. 6 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  18. Published

    Effects of remote control on usability of hydraulic excavator

    Uusisalo, J., Huhtala, K. & Vilenius, M., 2009, Proceedings of the ASME 2009 Dynamic Systems and Control Conference (DSCC2009) October 12-14, 2009, Hollywood, California, USA. p. 8 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  19. Published

    Energy efficient digital hydraulic force control

    Hopponen, V., Linjama, M., Ikonen, A., Rintamäki, P., Pietola, M. & Vilenius, M., 2009, The 11th Scandinavian International Conference on Fluid Power SICFP'09, Linköping, Sweden, June 2-4 2009. p. 11 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  20. Published

    Energy saving digital hydraulics

    Linjama, M., 2009, Proceedings of The Second Workshop on Digital Fluid Power, 12-13 November 2009, Linz, Austria. Scheidl, R. & Winkler, B. (eds.). p. 5-20

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  21. Published

    Enhanced industrial maintenance work task planning by using virtual engineering tools and haptic user interfaces

    Leino, S-P., Lind, S., Poyade, M., Kiviranta, S., Multanen, P., Reyes-Lecuona, A., Mäkiranta, A. & Muhammad, A., 2009, In : Lecture Notes in Computer Science. 5622, p. 346-354

    Research output: Contribution to journalArticleScientificpeer-review

  22. Published

    Experiences on the condition monitoring of military aircraft hydraulic systems

    Virta, P., Aaltonen, J., Koskinen, K. T. & Vilenius, M., 2009, The Sixth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, Dublin, Ireland, 23-25 June 2009. p. 753-764

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  23. Published

    Force-based and position-based impedance control of hydraulic manipulators

    Muhammad, A., Mattila, J., Virvalo, T. & Vilenius, M., 2009, The 11th Scandinavian International Conference on Fluid Power SICFP'09, Linköping, Sweden, June 2-4 2009. p. 15 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  24. Published

    Hydrauliikan online -kunnonvalvonta

    Virta, P., 2009, Lentotekniikan rakennetutkimuksen neuvottelupäivät VII, 27.-28.8.2009, Tampere. Aaltonen, J. (ed.). p. 1-11 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  25. Published

    Hydraulikomponenttien ja -järjestelmien puhtausvalvontastandardien nykytila

    Rinkinen, J., 2009, In : Fluid Finland. 3-4, p. 32-38

    Research output: Contribution to journalArticleProfessional

  26. Published

    Hydraulikomponenttien puhtausvalvontastandardien nykytilanne

    Rinkinen, J., 2009, PAMAS 2009 käyttäjäpäivät 10.-11.2.2009, Öljyjärjestelmien hiukkaslaskentakoulutus, Tampereen teknillinen yliopisto, Tampere, Finland. Rinkinen, J., Multanen, P., Elo, L. & Niiranen, E. (eds.). p. 134-160

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  27. Published

    IHA digitaalihydrauliikalla maailman ykköseksi

    Vilenius, M., 2009, In : Fluid Finland. p. s. 5

    Research output: Contribution to journalArticleProfessional

  28. Published

    Implementation of a DTP2 safety system for testing, and final CMM/SCEE integration and commissioning

    Mattila, J. & Järvenpää, J., 2009, VTT. 3 p. (VTT Publications; vol. 709)

    Research output: Book/ReportCommissioned reportProfessional

  29. Published

    Improved in-line maintenance of oil in circulating lubrication system

    Rinkinen, J. A., 2009, The Sixth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, Dublin, Ireland, 23-25 June 2009. p. 714-726

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  30. Published

    Jammed on/off valve fault compensation with distributed digital valve system

    Siivonen, L., Linjama, M., Huova, M. & Vilenius, M., 2009, In : International Journal of Fluid Power. 10, 2, p. 73-82

    Research output: Contribution to journalArticleScientificpeer-review

  31. Published

    Method and tools for machine maintainability design in VE

    Mäkiranta, A. V., Multanen, P., Leino, S-P. S. & Lind, S. M., 2009, The Sixth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, Dublin, Ireland, 23-25 June 2009. p. 877-888

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  32. Published

    Metviro

    Kortemaa, A., Mäkelä, T., Punki, J., Ranta, P., Palonen, T., Leino, T. & Koskinen, K. T., 2009

    Research output: Artistic and non-textual formSoftwareScientific

  33. Published

    Minimization of state transition uncertainty in the digital valve system

    Laamanen, A., 2009, The Second Workshop on Generic Intelligent Machines, May 14-15, 2009, Tampere University of Technology, Tampere, Finland. Huhtala, K. & Uusi-Heikkilä, J. (eds.). p. 9 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  34. Published

    Minimization of state transition uncertainty in the digital valve system

    Laamanen, A., 2009, Tampere: Tampere University of Technology. 111 p. (Tampereen teknillinen yliopisto. Julkaisu; vol. 809)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  35. Published

    Model-based design of power-split drivelines

    Erkkilä, M., 2009, Tampere: Tampere University of Technology. 102 p. (Tampereen teknillinen yliopisto. Julkaisu; vol. 835)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  36. Published

    Model-based design of power-split drivelines

    Erkkilä, M., Huhtala, K., Vilenius, M. & Virvalo, T., 2009, Agricultural Engineering Conference 2009, 6.-7.11.2009, Hannover, Germany. VDI-Berichte. p. 327-332

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  37. Published

    Modeling and motion control of an articulated-frame-steering hydraulic mobile machine

    Ghabcheloo, R. & Hyvönen, M., 2009, 17th Mediterranean Conference on Control and Automation MED '09, June 24-26, 2009, Thessaloniki, Greece. p. 92-97

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  38. Published

    Modelling and simulation of the aircraft rudder hydraulic servo actuator with dynamic interconnections to flight dynamics and flight control system models

    Hietala, J-P., Aaltonen, J., Koskinen, K. T. & Vilenius, M., 2009, SICFP'09 Proceedings, the11th Scandinavian International Conference on Fluid Power, Linköping, Sweden, June 2-4 2009. p. 12 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  39. Published

    Modelling, simulation and control of a water hydraulic manipulator

    Zhai, L., Virvalo, T. & Mattila, J., 2009, Proceedings of the Seventh International Conference on Fluid Power Transmission and Control, ICFP 2009, April 7-10, 2009, Hangzhou, China. Lu, Y., Wang, Q., Li, W. & Ju, B. (eds.). p. 485-489

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  40. Published

    New alternative for digital pump-motor-transformer

    Linjama, M. & Tammisto, J., 2009, Proceedings of The Second Workshop on Digital Fluid Power, 12-13 November 2009, Linz, Austria. Scheidl, R. & Winkler, B. (eds.). p. 49-61

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  41. Published

    New energy efficient valve concept

    Erkkilä, M., Lehto, E. & Virvalo, T., 2009, The 11th Scandinavian International Conference on Fluid Power SICFP'09, Linköping, Sweden, June 2-4 2009. p. 11 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  42. Published

    New steering mechanism and hydrostatic transmission system for articulated-frame-steering mobile machines

    Ghabcheloo, R., Hyvönen, M., Vuohijoki, A., Huhtala, K. & Vilenius, M., 2009, The 11th Scandinavian International Conference on Fluid Power SICFP'09, Linköping, Sweden, June 2-4 2009. p. 13 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  43. Published

    Novel bistable hammer valve for digital hydraulics

    Uusitalo, J-P., Söderlund, L., Kettunen, L., Ahola, V. & Linjama, M., 2009, Proceedings of The Second Workshop on Digital Fluid Power, 12-13 November 2009, Linz, Austria. Scheidl, R. & Winkler, B. (eds.). p. 33-48

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  44. Published

    Öljynäytteiden hiukkaslaskennan tärkeimmät standardit

    Niiranen, E., Elo, L. & Multanen, P., 2009, PAMAS 2009 käyttäjäpäivät 10.-11.2.2009, Öljyjärjestelmien hiukkaslaskentakoulutus, Tampereen teknillinen yliopisto, Tampere, Finland. Rinkinen, J., Multanen, P., Elo, L. & Niiranen, E. (eds.). p. 47-61

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  45. Published

    Optimized hardware design for the divertor remote handling control system

    Saarinen, H., Tiitinen, J., Aha, L., Muhammad, A., Mattila, J., Siuko, M., Vilenius, M., Järvenpää, J., Irving, M., Damiani, C. & Semeraro, L., 2009, In : Fusion Engineering and Design. 84, 2-6, p. 1666-1670

    Research output: Contribution to journalArticleScientificpeer-review

  46. Published

    Path planning for multiple marine vehicles

    Häusler, A. J., Ghabcheloo, R., Kaminer, I., Pascoal, A. M. & Aguiar, A. P., 2009, Oceans'09 IEEE Bremen, Balancing technology with future needs, 11-14 May 2009, Bremen, Germany. p. 9 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  47. Published

    Protocol based on packet transmission to teleoperate a skid steered mobile machine

    Moya, J. & Huhtala, K., 2009, Proceedings of the 2009 IEEE International Conference on Industrial Technology, ICIT 2009, 10-13 February 2009, Monash University, Gippsland, Victoria, Australia. p. 1109-1113

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  48. Published

    Puhtauden mittauksen erityispiirteet sotilaslentokoneissa

    Aaltonen, J., 2009, PAMAS 2009 käyttäjäpäivät 10.-11.2.2009, Öljyjärjestelmien hiukkaslaskentakoulutus, Tampereen teknillinen yliopisto, Tampere, Finland. Rinkinen, J., Multanen, P., Elo, L. & Niiranen, E. (eds.). p. 121-127

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  49. Published

    Puhtauden valvonta kehittyy

    Rinkinen, J., 2009, In : Promaint. 5/2009, p. 48-53

    Research output: Contribution to journalArticleProfessional

  50. Published

    Putkistopasseja TTY/IHA:n henkilökunnalle

    Rinkinen, J., 2009, In : Fluid Finland. 2/2009, p. 24-27

    Research output: Contribution to journalArticleProfessional

  51. Published

    Quality analysis of simulink models

    Plaska, M., Huova, M., Walden, M., Sere, K. & Linjama, M., 2009, Proceedings of the Conquest 2009. 12th International Conference on Quality Engineering in Software Technology, 16-18 September 2009, Nuremberg, Germany. Schieferdecker, I. & Goericke, S. (eds.). p. 223-240

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  52. Published

    Secondary controlled multi-chamber hydraulic cylinder

    Linjama, M., Vihtanen, H-P., Sipola, A. & Vilenius, M., 2009, The 11th Scandinavian International Conference on Fluid Power SICFP'09, Linköping, Sweden, June 2-4 2009. p. 15 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  53. Published

    Second order polynomial model for fluid dynamics in high pressure

    Karjalainen, J-P., Karjalainen, R., Huhtala, K. & Vilenius, M., 2009, Proceedings of the ASME 2009 Dynamic Systems and Control Conference (DSCC2009) October 12-14, 2009, Hollywood, California, USA. p. 7 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  54. Published

    Synchronization to wirelessly teleoperate a hydraulic skid steered mobile machine from control station

    Moya, J. & Huhtala, K., 2009, Seventh IEEE International Conference on Control and Automation ICCA 2009, December 9-11, 2009, New Zealand. p. 1992-1996

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  55. Published

    Tavoitteena häviötön hydrauliikka

    Linjama, M., 2009, In : Fluid Finland. 3-4, p. 12-17

    Research output: Contribution to journalArticleProfessional

  56. Published

    Temporally and spatially deconflicted path planning for multiple autonomous marine vehicles

    Häusler, A. J., Ghabcheloo, R., Pascoal, A. M., Aguiar, A. P., Kaminer, I. I. & Dobrokhodov, V. N., 2009, 8th IFAC International Conference on Manoeuvring and Control of Marine Craft (MCMC'2009), September 16-18, 2009, Guarujá, Brazil. p. 6 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  57. Published

    The energy balance of the electro-hydraulic linear actuation system

    Herranen, M., Huhtala, K. & Vilenius, M., 2009, Proceedings of the International Conference on Power Engineering 2009, ICOPE-09, November 16-20, 2009, Kobe, Japan. p. 6 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  58. Published

    The use of digital mock-ups on the development of the divertor test platform 2

    Esque, S., Mattila, J., Siuko, M., Vilenius, M., Järvenpää, J., Semeraro, L., Irving, M. & Damiani, C., 2009, In : Fusion Engineering and Design. 84, 2-6, p. 752-756

    Research output: Contribution to journalArticleScientificpeer-review

  59. Published

    Time-coordinated path following of multiple UAVs over time-varying networks using L1 adaptation

    Aguiar, A. P., Pascoal, A. M., Kaminer, I., Dobrokhodov, V., Xargay, E., Hovakimyan, N., Cao, C. & Ghabcheloo, R., 2009, AIAA Guidance, Navigation and Control Conference and Exhibit, Honolulu, Hawaii, 18-21 August, 2008. p. 25 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  60. Published

    Towards automatic testing of control systems for intelligent mobile machines

    Hyvönen, M., Multanen, P., Mantere, P., Kolu, A., Vallas, A., Alanen, J. & Rantala, S., 2009, The 11th Scandinavian International Conference on Fluid Power SICFP'09, Linköping, Sweden, June 2-4 2009. p. 12 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  61. Published

    Turvallisuus hydraulijärjestelmän öljynäytteenotossa ja mittauksessa

    Karjalainen, R., 2009, PAMAS 2009 käyttäjäpäivät 10.-11.2.2009, Öljyjärjestelmien hiukkaslaskentakoulutus, Tampereen teknillinen yliopisto, Tampere, Finland. Rinkinen, J., Multanen, P., Elo, L. & Niiranen, E. (eds.). p. 116-120

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  62. Published

    Unified software development approach for the safety-critical ITER maintenance devices

    Aha, L., Saarinen, H., Tiitinen, J., Muhammad, A., Mattila, J., Siuko, M., Vilenius, M., Järvenpää, J., Irving, M., Damiani, C. & Semeraro, L., 2009, In : Fusion Engineering and Design. 84, 2-6, p. 369-374

    Research output: Contribution to journalArticleScientificpeer-review

  63. Published

    Väitöskirjan esittely. Nopeutta virtuaalisuunnitteluun uudella integrointialgoritmilla. Rosenbrockin menetelmä on uusi hydraulipiirien numeerisen simuloinnin lähestymistapa

    Esque, S., 2009, In : Fluid Finland. 1/2009, p. 8-11

    Research output: Contribution to journalArticleProfessional

  64. Published

    Validation of divertor cassette locking system with a hydraulic jack tool

    Takalo, V., Esque, S., Mattila, J., Vilenius, M., Järvenpää, J., Siuko, M., Semeraro, L., Irving, M. & Damiani, C., 2009, In : Fusion Engineering and Design. 84, 2-6, p. 1808-1812

    Research output: Contribution to journalArticleScientificpeer-review

  65. Published

    Virtual tools for the designing and testing of modular machines

    Multanen, P. & Hyvönen, M., 2009, The Second Workshop on Generic Intelligent Machines, May 14-15, 2009, Tampere University of Technology, Tampere, Finland. Huhtala, K. & Uusi-Heikkilä, J. (eds.). p. 7 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  66. Published

    Water hydraulic manipulator for fail safe and fault tolerant remote handling operations at ITER

    Nieminen, P., Esque, S., Muhammad, A., Mattila, J., Väyrynen, J., Siuko, M. & Vilenius, M., 2009, In : Fusion Engineering and Design. 84, 2-6, p. 1420-1424

    Research output: Contribution to journalArticleScientificpeer-review

  67. 2008
  68. Published

    A new approach for numerical simulation of fluid power circuits using Rosenbrock methods

    Esque, S., 28 Nov 2008, Tampere: Tampere University of Technology. 125 p. (Tampere University of Technology. Publication; vol. 763)

    Research output: Book/ReportDoctoral thesisMonograph

  69. Published

    Accurate flow control with digital valve system

    Siivonen, L., Linjama, M., Vilenius, M. & Anttonen, P., 2008, Proceedings of the 51st National Conference on Fluid Power March 12-14, 2008, IFPE 2008, Las Vegas, USA. p. 287-294

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  70. Published

    A hand-held remote control as a user interface for a hydraulic mobile machine with an excavator

    Uusisalo, J., Karhu, O. & Huhtala, K., 2008, Proceedings of the 51st National Conference on Fluid Power March 12-14, 2008, IFPE 2008, Las Vegas, USA. p. 405-411

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  71. Published

    A review of automated boom control and vibration damping methods for mobile machines

    Honkakorpi, J., 2008, Fourth Arctic-Mediterranean Post Graduate Workshop on Intelligent Machines and Transport Systems, June 23-27, 2008, Saariselkä, Finland. Karvinen, T. & Keskinen, E. (eds.). p. 6 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  72. Published

    Assisting force feedback function for hand-held remote control of excavator

    Uusisalo, J., Karhu, O. & Huhtala, K., 2008, Proceedings of the 7th JFPS International Symposium on Fluid Power, Toyama, September 15-18, 2008. Tanaka, Y. (ed.). p. 653-658

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  73. Published

    A survey on control of hydraulic servo systems

    Zhai, L. & Virvalo, T., 2008, Fourth Arctic-Mediterranean Post Graduate Workshop on Intelligent Machines and Transport Systems, June 23-27, 2008, Saariselkä, Finland. Karvinen, T. & Keskinen, E. (eds.). p. 5 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  74. Published

    Automatic testing in the integration phase of mobile work machine (TINAT) - MASIT31

    Multanen, P., Hyvönen, M., Ellman, A., Rantala, S. & Alanen, J., 2008, Tekes.

    Research output: Book/ReportCommissioned reportProfessional

  75. Published

    Autonomous excavation using hydraulic mobile machine retrofitted with electronic control system

    Karhu, O., Uusisalo, J., Honkakorpi, J. & Huhtala, K., 2008, Proceedings of the 7th JFPS International Symposium on Fluid Power, Toyama 2008, September 15-18, 2008. Tanaka, Y. (ed.). p. 359-362

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  76. Published

    Comparing controllers in pneumatic cylinder motion control

    Virvalo, T. & Mäkinen, E., 2008, Proceedings of the 6th International Fluid Power Conference Dresden, Fluid Power in Motion, 6iFK, April 1.-2.2008, Dresden. p. 289-304

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  77. Published

    Comparison of digital hydraulic and traditional servo system in demanding water hydraulic tracking control

    Linjama, M., Seppälä, J., Mattila, J. & Vilenius, M., 2008, Fluid Power and Motion Control FPMC 2008, 10-12 September 2008, Bath, UK. Johnston, D. N. & Plummer, A. R. (eds.). p. 393-403

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  78. Published

    Comparison of tracking controllers of hydraulic cylinder drive by simulations

    Virvalo, T., 2008, Proceedings of the 7th International Conference on Machine Automation ICMA2008, Service Robotics and Mechatronics, September 24-26, 2008, Awaji, Japan. p. 37-40

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  79. Published

    Comparison of vibration and pressure signals for fault detection on water hydraulic proportional valve

    Krogerus, T., Pietikäinen, J. & Koskinen, K. T., 2008, Proceedings of the 7th JFPS International Symposium on Fluid Power, Toyama, September 15-18, 2008. Tanaka, Y. (ed.). p. 691-696

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  80. Published

    Control and actuator synchronization of water hydraulic 6-DOF motion platform

    Sairiala, H., Rokala, M. & Koskinen, K. T., 2008, Proceedings of the 51st National Conference on Fluid Power March 12-14, 2008, IFPE 2008, Las Vegas, USA. p. 345-350

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  81. Published

    Detection of errors and failures using intelligent interface during a teleoperation process on skid steered mobile machine

    Javier, M., Karhu, O. I., Uusisalo, J. R. A. & Huhtala, K. J., 2008, 3rd IEEE Conference on Industrial Electronics and Applications ICIEA 2008, 3-5 June 2008, Singapore. p. 326-330

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  82. Published

    Development of a virtual environment for promoting safety in machine maintenance

    Lind, S., Leino, S-P., Viitaniemi, J., Helin, K., Multanen, P., Mäkiranta, A. & Heikkilä, J., 2008, Proceedings of the 6th International Conference on Occupational Risk Prevention, ORP´2008, A Coruña, Galicia, Spain, May 14th, 15th & 16th, 2008. Mondelo, P., Karwowski, W., Saarela, K., Hale, A. & Occipinti, E. (eds.). p. 14 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  83. Published

    Development of DTP2 subsystems and tooling in support of remote handling trials

    Mattila, J., 2008, Espoo: VTT. 7 p. (VTT Publications; vol. 678)

    Research output: Book/ReportCommissioned reportProfessional

  84. Published

    Diesel engine hydraulics

    Huhtala, K., 2008, Proceedings of the First Workshop on Digital Fluid Power 3rd October, 2008, Tampere, Finland. Linjama, M. & Laamanen, A. (eds.). p. 129-140

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  85. Published

    Digitaalihydrauliikan kuulumiset

    Linjama, M., 2008, In : Fluid Finland. 2, p. 8-10

    Research output: Contribution to journalArticleProfessional

  86. Published

    Digitaalihydrauliikan seminaarin suosio yllätti

    Linjama, M., 2008, In : Fluid Finland. 3, p. 36-37

    Research output: Contribution to journalArticleProfessional

  87. Published

    Digital hydraulics research at IHA

    Linjama, M., 2008, Proceedings of the First Workshop on Digital Fluid Power 3rd October, 2008, Tampere, Finland. Linjama, M. & Laamanen, A. (eds.). p. 7-30

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  88. Published

    Digital hydraulics - Towards perfect valve technology

    Linjama, M. & Vilenius, M., 2008, In : Ventil - Journal for Hydraulics, Automation and Mechatronics. 14, 2, p. 138-148

    Research output: Contribution to journalArticleScientificpeer-review

  89. Published

    Digital microhydraulics

    Linjama, M. & Karvonen, M., 2008, Proceedings of the First Workshop on Digital Fluid Power 3rd October, 2008, Tampere, Finland. Linjama, M. & Laamanen, A. (eds.). p. 141-152

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  90. Published

    Digital schlägt Analog um 40%

    Linjama, M., 2008, In : Fluid. 7-8/2008, p. 12-13

    Research output: Contribution to journalArticleProfessional

  91. Published

    Dynamic real-time simulation of intelligent mobile machines

    Multanen, P., Hyvönen, M., Saarinen, J. & Vilenius, M., 2008, Proceedings of the 27th IASTED International Conference Modelling, Identification, and Control, February 11-13, 2008, Innsbruck, Austria. p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  92. Published

    EFDA quality assurance exercise

    Mattila, J. & Järvenpää, J., 2008, Espoo: VTT. 2 p. (VTT Publications; vol. 678)

    Research output: Book/ReportCommissioned reportProfessional

  93. Published

    Emission of combustion engines - also a challenge to hydraulics

    Huhtala, K. & Vilenius, M., 2008, Proceedings of the 6th International Fluid Power Conference Dresden, Fluid Power in Motion, 6iFK, April 1.-2.2008, Dresden. p. 423-438

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  94. Published

    Etelä-Afrikan Tribologia 2008 -konferenssi

    Rinkinen, J. & Löppönen, M., 2008, In : Fluid Finland. p. 20-23

    Research output: Contribution to journalArticleProfessional

  95. Published

    Experiences and equipment in condition monitoring and in-line maintenance of oil

    Rinkinen, J. & Elo, L., 2008, Proceedings of the 8th International CJC Sales Meeting, May 13th-15th, 2008, Denmark. p. 56 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  96. Published

    Fault tolerant digital valve system and fault tolerant control

    Siivonen, L., 2008, Proceedings of the First Workshop on Digital Fluid Power 3rd October, 2008, Tampere, Finland. Linjama, M. & Laamanen, A. (eds.). p. 77-88

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  97. Published

    Force-based impedance control of hydraulic manipulators and its relationship with position-based impedance control

    Muhammad, A., Mattila, J., Virvalo, T. & Vilenius, M., 2008, Proceedings of the 7th International Conference on Machine Automation ICMA2008, Service Robotics and Mechatronics, September 24-26, 2008, Awaji, Japan. p. pp. 327

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  98. Published

    FPMC Symposiumi Iso-Britanniassa

    Elo, L., 2008, In : Fluid Finland. 3, p. 32-34

    Research output: Contribution to journalArticleProfessional

  99. Published

    Host activities in connection with the DTP2 test facility

    Järvenpää, J., Timperi, A., Tuominen, R. & Mattila, J., 2008, Espoo: VTT. 5 p. (VTT Publications; vol. 678)

    Research output: Book/ReportCommissioned reportProfessional

  100. Published

    Hydraulitekniikka (1. p.)

    Kauranne, H., Kajaste, J. & Vilenius, M., 2008, Helsinki: WSOY.

    Research output: Book/ReportBookScientificpeer-review

  101. Published

    Implementation of a DTP2 safety system for testing, and final CMM/SCEE integration and commissioning

    Mattila, J. & Järvenpää, J., 2008, Espoo: VTT. 3 p. (VTT Publications; vol. 678)

    Research output: Book/ReportCommissioned reportProfessional

  102. Published

    Improved positioning accuracy for a water hydraulic manipulator with state feedback controller

    Muhammad, A., Mattila, J., Virvalo, T. & Vilenius, M., 2008, Proceedings of the 7th International Conference on Machine Automation ICMA2008, Service Robotics and Mechatronics, September 24-26, 2008, Awaji, Japan. p. 321-326

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

ID: 21447