Tampere University of Technology

TUTCRIS Research Portal

Department of Mechanical Engineering and Industrial Systems

Research unit: Department

  1. A1 Journal article-refereed
  2. Published

    Conjugated heat transfer from a uniformly heated plate and a plate fin with uniform base heat flux

    Lindstedt, M. & Karvinen, R., Apr 2017, In : International Journal of Heat and Mass Transfer. 107, p. 89-95 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  3. Published

    Continuum approach for modeling fatigue in amorphous glassy polymers. Applications to the investigation of damage-ratcheting interaction in polycarbonate

    Holopainen, S., Barriere, T., Cheng, G. & Kouhia, R., Apr 2017, In : International Journal of Plasticity. 91, p. 109-133 24 p.

    Research output: Contribution to journalArticleScientificpeer-review

  4. Published

    Effect of Laser Power on Yield of TiO2 Nanoparticles Synthesized by Pulsed Laser Ablation in Water

    Singh, A., Vihinen, J., Frankberg, E., Hyvärinen, L., Honkanen, M. & Levänen, E., Mar 2017, In : Journal of Ceramic Science and Technology. 8, 1, p. 39-43 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  5. Published

    Numerical 3D modelling of the effects of strain rate and confining pressure on the compressive behavior of Kuru granite

    Saksala, T., Hokka, M. & Kuokkala, V-T., 2017, In : Computers and Geotechnics. 88, p. 1-8 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  6. Published

    Effect of humidity on triboelectric charging in a vertically vibrated granular bed: Experiments and modeling

    Kolehmainen, J., Sippola, P., Raitanen, O., Ozel, A., Boyce, C. M., Saarenrinne, P. & Sundaresan, S., 2017, In : Chemical Engineering Science. 173, p. 363-373 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  7. Published

    A new paradigm for fatigue analysis - evolution equation based continuum approach

    Jussila, J., Holopainen, S., Kaarakka, T., Kouhia, R., Mäkinen, J., Orelma, H., Ottosen, N. S., Matti, R. & Saksala, T., 2017, In : Rakenteiden mekaniikka. 50, 3, p. 333-336 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  8. Published

    An investigation of fatigue damage development under complete contact fretting test conditions

    Holopainen, S., Juoksukangas, J., Kouhia, R., Lehtovaara, A. & Saksala, T., 30 Dec 2016, In : Rakenteiden mekaniikka. 49, 3, p. 151-159 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  9. Published

    On optimisation of structures under stability constraints - a simple example

    Kouhia, R., Pajunen, S. & Poutala, J., 9 Dec 2016, In : Rakenteiden mekaniikka. 49, 2, p. 69-77 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  10. Published

    Muodonmuutoksen mitat kontinuumimekaniikassa

    Hartikainen, J., Kouhia, R., Mikkola, M. & Mäkinen, J., 9 Dec 2016, In : Rakenteiden mekaniikka. 49, 2, p. 86-99 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  11. Published

    Optimal control of pump rotational speed in filling and emptying a reservoir: minimum energy consumption with fixed time

    Lindstedt, M. & Karvinen, R., Dec 2016, In : Energy Efficiency. 9, 6, p. 1461–1474 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  12. Published

    Unsteady laminar boundary layers of rainbow trout swimming in turbulent flows

    Yanase, K. & Saarenrinne, P., 8 Nov 2016, In : Biology Open. 33 p.

    Research output: Contribution to journalArticleScientificpeer-review

  13. Published

    Continuum approach for modelling transversely isotropic high-cycle fatigue

    Holopainen, S., Kouhia, R. & Saksala, T., 1 Nov 2016, In : EUROPEAN JOURNAL OF MECHANICS A: SOLIDS. 60, p. 183-195

    Research output: Contribution to journalArticleScientificpeer-review

  14. Published
  15. Published

    Stress relaxation in tempered glass caused by heat soak testing

    Schneider, J., Hilcken, J., Aronen, A., Karvinen, R., Olesen, J. F. & Nielsen, J., 1 Sep 2016, In : Engineering Structures. 122, p. 42-49 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  16. Published

    Multi-objective optimization of electronics heat sinks cooled by natural convection

    Lampio, K. & Karvinen, R., Sep 2016, In : Journal of Physics: Conference Series. 745, 3, 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  17. Published

    A conceptual modeling and simulation framework for system Design

    Coatanea, E., Roca, R., Mokhtarian, H., Mokammel, F. & Ikkala, K., 1 Jul 2016, In : Computing in Science and Engineering. 18, 4, p. 42-52

    Research output: Contribution to journalArticleScientificpeer-review

  18. Published

    Big data tulee - mitä se tarkoittaa

    Holopainen, S., 15 Jun 2016, In : Futura. 2, p. 5 - 18 14 p., 2.

    Research output: Contribution to journalArticleScientificpeer-review

  19. Published

    Modeling of Hysteresis Losses in Ferromagnetic Laminations under Mechanical Stress

    Rasilo, P., Singh, D., Aydin, U., Martin, F., Kouhia, R., Belahcen, A. & Arkkio, A., Mar 2016, In : IEEE Transactions on Magnetics. 52, 3, 4 p., 7300204.

    Research output: Contribution to journalArticleScientificpeer-review

  20. Published

    High strain rate radial compression of Norway spruce earlywood and latewood

    Moilanen, C. S., Björkqvist, T., Engberg, B. A., Salminen, L. I. & Saarenrinne, P., 1 Feb 2016, In : Cellulose. 23, 1, p. 873-889 17 p.

    Research output: Contribution to journalArticleScientificpeer-review

  21. Published

    Importance of maintenance data quality in extended warranty simulation

    Mahlamäki, K., Niemi, A., Jokinen, J. & Borgman, J., 1 Jan 2016, In : International Journal of COMADEM. 19, 1, p. 3-10 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  22. Published

    The cross-sectional area of the gluteus maximus muscle varies according to habitual exercise loading: Implications for activity-related and evolutionary studies

    Niinimäki, S., Härkönen, L., Nikander, R., Abe, S., Knüsel, C. & Sievänen, H., 2016, In : HOMO: Journal of Comparative Human Biology. 67, 2, p. 125-137

    Research output: Contribution to journalArticleScientificpeer-review

  23. Published

    Management of distributed knowledge encapsulated in embedded devices

    Ramis Ferrer, B., Iarovyi, S., Gonzalez, L., Lobov, A. & Martinez Lastra, J. L., 2016, In : International Journal of Production Research. 54, 18, p. 1-18 18 p.

    Research output: Contribution to journalArticleScientificpeer-review

  24. Published

    Numerical modeling of dynamic rock fracture with a combined 3D continuum viscodamage-embedded discontinuity model

    Saksala, T., Brancherie, D. & Ibrahimbegovic, A., 2016, In : International Journal for Numerical and Analytical Methods in Geomechanics. 40, 9, p. 1339–1357 19 p.

    Research output: Contribution to journalArticleScientificpeer-review

  25. Published

    Application of a Capability-based Adaptation Methodology to a Small-size Production System

    Järvenpää, E., Lanz, M. & Tuokko, R., 2016, In : International Journal of Manufacturing Technology and Management. 30, 1/2, p. 67-86 20 p.

    Research output: Contribution to journalArticleScientificpeer-review

  26. Published

    Numerical study of the influence of hydrostatic and confining pressure on percussive drilling of hard rock

    Saksala, T., 2016, In : Computers and Geotechnics. 76, p. 120-128 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  27. Published

    Modelling of Dynamic Rock Fracture Process with a Rate-Dependent Combined Continuum Damage-Embedded Discontinuity Model Incorporating Microstructure

    Saksala, T., 2016, In : Rock Mechanics and Rock Engineering. 49, p. 3947–3962 16 p.

    Research output: Contribution to journalArticleScientificpeer-review

  28. Published

    Brownfield Process: A method for modular product family development aiming for product configuration

    Pakkanen, J., Juuti, T. & Lehtonen, T., 2016, In : DESIGN STUDIES. 45B, p. 210-241 32 p.

    Research output: Contribution to journalArticleScientificpeer-review

  29. Published

    Comparative environmental impacts of additive and subtractive manufacturing technologies

    Paris, H., Mokhtarian, H., Coatanéa, E., Museau, M. & Ituarte, I. F., 2016, In : CIRP Annals: Manufacturing Technology. 65, 1, p. 29-32

    Research output: Contribution to journalArticleScientificpeer-review

  30. Published

    Exercise loading history and femoral neck strength in a sideways fall: A three-dimensional finite element modeling study.

    Abe, S., Narra, N., Nikander, R., Hyttinen, J., Kouhia, R. & Sievänen, H., 2016, In : Bone. 92, p. 9-17 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  31. Published

    Validity of parameters in static linear testing of flexor tendon repair

    Linnanmäki, L., Göransson, H., Havulinna, J., Sippola, P., Karjalainen, T. & Leppänen, O. V., 2016, In : Journal of Biomechanics. 49, 13, p. 2785–2790

    Research output: Contribution to journalArticleScientificpeer-review

  32. Published

    Challenges of Knowledge and Information Management during New Product Introduction: Experiences from a Finnish Multinational Company

    Järvenpää, E., Kopra, M-J. & Lanz, M., 2016, In : Interdisciplinary Journal of Information, Knowledge, and Management. 11, p. 285 308 p.

    Research output: Contribution to journalArticleScientificpeer-review

  33. Published

    Numerical modelling of quasi-brittle fracture with the rate-dependent multiple embedded discontinuity approach

    Saksala, T., 2016, In : Rakenteiden mekaniikka. 49, 2, p. 25-35 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  34. Published

    Surrogate-model based method and software for practical design optimization problems

    Pajunen, S. & Laakkonen, P., 2016, In : Rakenteiden mekaniikka. 49, 3, p. 100-118 19 p.

    Research output: Contribution to journalArticleScientificpeer-review

  35. Published

    Production of sulfonated polyetheretherketone/polypropylene fibers for photoactive textiles

    Mylläri, V., Fatarella, E., Ruzzante, M., Pogni, R., Baratto, M. C., Skrifvars, M., Syrjälä, S. & Järvelä, P., 1 Oct 2015, In : Journal of Applied Polymer Science. 132, 39, 42595.

    Research output: Contribution to journalArticleScientificpeer-review

  36. Published

    Context-aware knowledge-based middleware for selective information delivery in data-intensive monitoring systems

    Evchina, Y., Puttonen, J., Dvoryanchikova, A. & Martinez Lastra, J. L., Aug 2015, In : Engineering Applications of Artificial Intelligence. 43, p. 111-126 16 p.

    Research output: Contribution to journalArticleScientificpeer-review

  37. Published

    High temperature erosion wear of cermet particles reinforced self-fluxing alloy HVOF sprayed coatings

    Surzhenkov, A., Goljandin, D., Traksmaa, R., Viljus, M., Talviste, K., Aruniit, A., Latokartano, J. & Kulu, P., 27 Jul 2015, In : Materials Science: Medziagotyra. 21, 3, p. 386-390 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  38. Published

    A comparison of rheology and FTIR in the study of polypropylene and polystyrene photodegradation

    Mylläri, V., Ruoko, T-P. & Syrjälä, S., 1 Jul 2015, In : Journal of Applied Polymer Science. 132, 28, 6 p., 42246.

    Research output: Contribution to journalArticleScientificpeer-review

  39. Published

    Systematic search for design contradictions in systems' architecture: Toward a computer aided analysis

    Coatanéa, E., Nonsiri, S., Roca, R., Mokammel, F., Kruck, J. & Christophe, F., 6 Jun 2015, In : Journal of Integrated Design and Process Science. 19, 1, p. 25-46 22 p.

    Research output: Contribution to journalArticleScientificpeer-review

  40. Published

    Optimal Shapes of Straight Fins and Finned Heat Sinks

    Lindstedt, M., Lampio, K. & Karvinen, R., Jun 2015, In : Journal of Heat Transfer: Transactions of the ASME. 137, 6, 8 p., 061006.

    Research output: Contribution to journalArticleScientificpeer-review

  41. Published

    Shop floor-level control of manufacturing companies: an interview study in Finland

    Tokola, H., Järvenpää, E., Salonen, T., Lanz, M., Koho, M. & Niemi, E., Mar 2015, In : Management and Production Engineering Review. 6, 1, p. 51-58 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  42. Published

    High speed, high strength microwelding of Si/glass using ps-laser pulses

    Miyamoto, I., Okamoto, Y., Hansen, A., Vihinen, J., Amberla, T. & Kangastupa, J., 9 Feb 2015, In : Optics Express. 23, 3, p. 3427-3439 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  43. Published

    Towards a concept for realizing sustainability in the manufacturing industry

    Koho, M., Tapaninaho, M., Heilala, J. & Torvinen, S., 2 Jan 2015, In : Journal of Industrial and Production Engineering. 32, 1, p. 12-22 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  44. Published

    Human parechovirus as a minor cause of acute otitis media in children

    Sillanpää, S., Oikarinen, S., Sipilä, M., Seppälä, E., Nurminen, N., Rautiainen, M., Laranne, J. & Hyöty, H., 1 Jan 2015, In : JOURNAL OF CLINICAL VIROLOGY. 62, p. 106-109 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  45. Published

    Context-sensitive optimisation of the key performance indicators for FMS

    Uddin, M. K., Puttonen, J. & Martinez Lastra, J. L., 2015, In : International Journal of Computer Integrated Manufacturing. 28, 9, p. 958-971 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  46. Published

    Combined continuum damage-embedded discontinuity model for explicit dynamic fracture analyses of quasi-brittle materials

    Saksala, T., Brancherie, D., Harari, I. & Ibrahimbegovic, A., 2015, In : International Journal for Numerical Methods in Engineering. 101, 3, p. 230-250 21 p.

    Research output: Contribution to journalArticleScientificpeer-review

  47. Published

    Rate dependent embedded discontinuity approach incorporating heterogeneity for numerical modelling of rock fracture

    Saksala, T., 2015, In : Rock Mechanics and Rock Engineering. 48, 4, p. 1605-1622 18 p.

    Research output: Contribution to journalArticleScientificpeer-review

  48. Published

    Experimental and numerical study of a choke valve in a turbulent flow

    Huovinen, M., Kolehmainen, J., Koponen, P., Nissilä, T. & Saarenrinne, P., 2015, In : Flow Measurement and Instrumentation. 45, p. 151-161 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  49. Published

    Unsteady turbulent boundary layers in swimming rainbow trout

    Yanase, K. & Saarenrinne, P., 2015, In : Journal of Experimental Biology. 218, 9, p. 1373-1385

    Research output: Contribution to journalArticleScientificpeer-review

  50. Published

    Image-Based Stress and Strain Measurement of Wood in the Split-Hopkinson Pressure Bar

    Moilanen, C. S., Saarenrinne, P., Engberg, B. A. & Björkqvist, T., 2015, In : Measurement Science and Technology. 26, 8, 085206.

    Research output: Contribution to journalArticleScientificpeer-review

  51. Published

    Planning-based semantic web service composition in factory automation

    Puttonen, J., Lobov, A., Cavia Soto, M. A. & Martinez Lastra, J. L., 2015, In : Advanced Engineering Informatics. 29, 4, p. 1041-1054

    Research output: Contribution to journalArticleScientificpeer-review

  52. Published

    Damage-viscoplastic model based on the Hoek-Brown criterion for numerical modeling of rock fracture

    Saksala, T., 2015, In : Rakenteiden mekaniikka. 48, 2, p. 99-114 16 p.

    Research output: Contribution to journalArticleScientificpeer-review

  53. Published

    Some aspects on efficient solution of creep problems

    Kouhia, R., Marjamäki, P. & Kivilahti, J., 2015, In : Rakenteiden mekaniikka. 48, 4, p. 199-210 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  54. Published

    Additive Manufacturing in Production: A Study Case Applying Technical Requirements: 15th Nordic Laser Materials Processing Conference, Nolamp 15

    Ituarte, I. F., Coatanea, E., Salmi, M., Tuomi, J. & Partanen, J., 2015, In : Physics Procedia. 78, p. 357-366 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  55. Published

    Systematic Search and Ranking of Physical Contradictions Using Graph Theory Principles: Toward a Systematic Analysis of Design Strategies and their Impacts: TRIZ and Knowledge-Based Innovation in Science and Industry

    Coatanéa, E., Ryynänen, L., Calonius, O., Mokammel, F. & Riitahuhta, A., 2015, In : Procedia Engineering. 131, p. 1165-1182 18 p.

    Research output: Contribution to journalArticleScientificpeer-review

  56. Published

    Rewiring the wax ester production pathway of acinetobacter baylyi ADP1

    Santala, S., Efimova, E., Koskinen, P., Karp, M. T. & Santala, V., 21 Mar 2014, In : ACS Synthetic Biology. 3, 3, p. 145-151 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  57. Published

    Fatigue behavior of laser clad round steel bars

    Tuominen, J., Näkki, J., Poutala, J., Miettinen, J., Peltola, T., Vuoristo, P., Rasehorn, I., Alam, M. M. & Kaplan, A. F. H., 2014, In : Journal of Laser Applications. p. 1-10 10 p., 012006.

    Research output: Contribution to journalArticleScientificpeer-review

  58. Published

    Numerical and experimental study of percussive drilling with a triple-button bit on Kuru granite

    Saksala, T., Gomon, D., Hokka, M. & Kuokkala, V-T., 2014, In : International Journal of Impact Engineering. 72, p. 56-66 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  59. Published

    Virtual prototypes reveal more development ideas: comparison between customers' evaluation of virtual and physical prototypes

    Tiainen, T., Ellman, A. & Kaapu, T., 2014, In : Virtual and Physical Prototyping. 9, 3, p. 169-180 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  60. Published

    Sliding mode control of a pneumatic muscle actuator system with a PWM strategy

    Jouppila, V. T., Gadsden, A. S., Bone, G. M., Ellman, A. U. & Habibi, S. R., 2014, In : International Journal of Fluid Power. 15, 1, p. 19-31 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  61. Published

    Unilateral ablation of trunk superficial neuromasts increases directional instability during steady swimming in the yellowtail kingfish Seriola lalandi

    Yanase, K., Herbert, N. A. & Montgomery, J. C., 2014, In : Journal of Fish Biology. 85, 3, p. 838-856

    Research output: Contribution to journalArticleScientificpeer-review

  62. Published

    Interference-based overlapping particle tracking velocimetry for fluidized beds

    Kolehmainen, J., Elfvengren, J. & Saarenrinne, P., 2014, In : Experiments in Fluids. 55, 1825, p. 1-15 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  63. Published

    Temperature and fatigue effect on the maximum swimming speed of jack mackerel Trachurus japonicus

    Riyanto, M., Yanase, K. & Arimoto, T., 2014, In : Fisheries Science. 80, 1, p. 53-59 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  64. Published

    Sedimentation stability and rheological properties of ionic liquid-based bidisperse magnetorheological fluids

    Jönkkäri, I., Isakov, M. & Syrjälä, S., 2014, In : Journal of Intelligent Material Systems and Structures. 26, 16, p. 2256-2265 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  65. Published

    On the Updating of Domain OWL Models at Runtime in Factory Automation Systems

    Puttonen, J., Lobov, A. & Martinez Lastra, J. L., 2014, In : International Journal of Web Services Research. 11, 2, p. 46-66 20 p.

    Research output: Contribution to journalArticleScientificpeer-review

  66. Published

    User Interpretations of Virtual Prototypes: Physical Place Matters

    Kaapu, T., Tiainen, T. & Ellman, A., 2014, In : Scandinavian Journal of Information Systems. 25, 2, p. 1-22 22 p., 4.

    Research output: Contribution to journalArticleScientificpeer-review

  67. Published

    Prioritizing Design for Environment Strategies Using a Stochastic Analytic Hierarchy Process

    Ramanujan, D., Bernstein, W. Z., Choi, J-K., Koho, M., Zhao, F. & Ramani, K., 2014, In : Journal of Mechanical Design. 136, 7, p. 1-10 10 p., 071002.

    Research output: Contribution to journalArticleScientificpeer-review

  68. Published

    Influence of damage on inhomogeneous deformation behavior of amorphous glassy polymers. Modeling and algorithmic implementation in a finite element setting

    Holopainen, S., 2014, In : Engineering Fracture Mechanics. 114, p. 28-50 23 p.

    Research output: Contribution to journalArticleScientificpeer-review

  69. Published

    Anisotropic viscodamage-viscoplastic consistency constitutive model with a parabolic cap for rocks with brittle and ductile behavior

    Saksala, T. & Ibrahimbegovic, A., 2014, In : International Journal of Rock Mechanics and Mining Sciences. 70, p. 460-473 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  70. Published

    Functional failure modes cause-consequence logic suited for mobile robots used at scientific facilities

    Douzi, I. K., Virtanen, S., Bonnal, P. & Verma, A. K., 2014, In : Reliability Engineering and System Safety. 129, p. 10-18 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  71. Published

    A Continuum damage model based on Ottosen's four parameter failure criterion for concrete

    Tahaei Yaghoubi, S., Kouhia, R., Hartikainen, J. & Kolari, K., 2014, In : Rakenteiden mekaniikka. 47, 2, p. 50-66 17 p.

    Research output: Contribution to journalArticleScientificpeer-review

  72. Published

    Experimental Comparisons of Sliding Mode Controlled Pneumatic Muscle and Cylinder Actuators

    Jouppila, V., Gadsden, A. S. & Ellman, A., 2014, In : Journal of Dynamic Systems, Measurement and Control: Transactions of the ASME. 136, 4, 10 p., 044503.

    Research output: Contribution to journalArticleScientificpeer-review

  73. Published

    Novel Micro-Welding of Silicon and Glass by Ultrashort Pulsed Laser

    Okamoto, Y., Miyamoto, I., Vihinen, J. & Okada, A., 2014, In : Materials Science Forum. 783-786, p. 2792-2797 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  74. Published

    Mechanical analysis of a pneumatically actuated concentric double-shell structure for cell stretching

    Zhao, F., Kreutzer, J., Pajunen, S. & Kallio, P., 2014, In : Micromachines. 5, 4, p. 868-885 18 p.

    Research output: Contribution to journalArticleScientificpeer-review

  75. Published

    A packet scheduler for real-time 6LoWPAN wireless networks in manufacturing systems

    Santillan Martinez, G., Delamer, I. M. & Martinez Lastra, J. L., 2014, In : Journal of Intelligent Manufacturing. 10845, 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  76. Published

    A hydraulic cylinder model for multibody simulations

    Ylinen, A., Marjamäki, H. & Mäkinen, J., 2014, In : Computers & Structures. 138, p. 62-72 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  77. Published

    3D numerical modelling of bit-rock fracture mechanisms in percussive drilling with a multiple-button bit

    Saksala, T., 2013, In : International Journal for Numerical and Analytical Methods in Geomechanics. 37, 3, p. 309-324

    Research output: Contribution to journalArticleScientificpeer-review

  78. Published

    On the solution of non-linear diffusion equation

    Kouhia, R., 2013, In : Rakenteiden mekaniikka. 46, 4, p. 116-130 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  79. Published

    Sliding wear of TiC-NiMo and Cr3C2-Ni cermet particles reinforced FeCrSiB matrix HVOF sprayed coatings

    Surzhenkov, A., Antonov, M., Goljandin, D., Vilgo, T., Mikli, V., Viljus, M., Latokartano, J. & Kulu, P., 2013, In : Estonian Journal of Engineering. 19, 3, p. 203-211 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  80. Published

    Semantics-Based Composition of Factory Automation Processes Encapsulated by Web Services

    Puttonen, J., Lobov, A. & Martinez Lastra, J. L., 2013, In : IEEE Transactions on Industrial Informatics. 9, 4, p. 2349-2359 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  81. Published

    Magnetomechanical coupled FE simulations of rotating electrical machines

    Belahcen, A., Fonteyn, K., Kouhia, R., Rasilo, P. & Arkkio, A., 2013, In : COMPEL: The International Journal for Computation and Mathematics in Electrical and Electronic Engineering. 32, 5, p. 1484-1499 16 p., 17095978.

    Research output: Contribution to journalArticleScientificpeer-review

  82. Published

    Development of a complete contact fretting test device

    Juoksukangas, J., Lehtovaara, A. & Mäntylä, A., 2013, In : Proceedings of the institution of Mechanical Engineers Part J: Journal of Engineering Tribology. 227, 6, p. 570-578

    Research output: Contribution to journalArticleScientificpeer-review

  83. Published

    Micro and desktop factories for micro/meso-scale manufacturing applications and future visions

    Tuokko, R., Järvenpää, E., Heikkilä, R. & Nurmi, A., 2013, In : Applied Mechanics and Materials. 289, 2, p. 1-12 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  84. Published

    Implementation of a direct procedure for critical point computations using preconditioned iterative solvers

    Kouhia, R., Tůma, M., Mäkinen, J., Fedoroff, A. & Marjamäki, H., Oct 2012, In : Computers & Structures. 108-109, p. 110-117 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  85. Published

    Two-step Exact Solution for Modified Mohr-Coulomb Viscoplastic Consistency Model with Linear Hardening/Softening: A Proof with Maple Software

    Saksala, T., 2012, In : American Journal of Computational and Applied Mathematics. 2, 1, p. 41-45

    Research output: Contribution to journalArticleScientificpeer-review

  86. Published

    Väsymislaskenta taajuustasossa

    Lähdesniemi, J. & Mäkinen, J., 2012, In : Rakenteiden mekaniikka. 45, 1, p. 21-33

    Research output: Contribution to journalArticleScientificpeer-review

  87. Published

    An agent-based system for orchestration support of web service-enabled devices in discrete manufacturing systems

    Villasenor Herrera, V., Vidales Ramos, A. & Martinez Lastra, J., 2012, In : Journal of Intelligent Manufacturing. 23, 6, p. 2681-2702

    Research output: Contribution to journalArticleScientificpeer-review

  88. Published

    Development of a test device for the evaluation of journal bearings

    Sandvik, K., Lehtovaara, A., Makkonen, E., Kallio, M., Kuvaja, K. & Kuokkala, V-T., 2012, In : Tribologia - Finnish Journal of Tribology. 31, 1-2, p. 12-21

    Research output: Contribution to journalArticleScientificpeer-review

  89. Published

    Comparative study of multiple criteria decision making methods for building design

    Mela, K., Tiainen, T. & Heinisuo, M., 2012, In : Advanced Engineering Informatics. 26, 4, p. 716-726

    Research output: Contribution to journalArticleScientificpeer-review

  90. Published

    A Holistic View on Design and Development of Manufacturing Systems

    Nylund, H. & Andersson, P. H., 2012, In : Procedia CIRP. 3, p. 388-393

    Research output: Contribution to journalArticleScientificpeer-review

  91. Published

    Geometric approach in numerical eigenproblem analysis

    Feodoroff, A. & Kouhia, R., 2012, In : Rakenteiden mekaniikka. 45, 3, p. 104-124 21 p.

    Research output: Contribution to journalArticleScientificpeer-review

  92. Published

    Ontology-based context-sensitive computing for FMS optimization

    Uddin, K. M., Puttonen, J., Scholze, S., Dvoryanchikova, A. & Martinez Lastra, J. L., 2012, In : Assembly Automation. 32, 2, p. 163-174

    Research output: Contribution to journalArticleScientificpeer-review

  93. Published

    Automotive transmission system design based on reliability parameters

    Douzi, I. K., Virtanen, S. & Verma, A. K., 2012, In : Journal of Reliability and Statistical Studies. 5, 2, p. 2229-5666

    Research output: Contribution to journalArticleScientificpeer-review

  94. Published

    Considering aspects of lean, agility, and sustainability in digital manufacturing systems

    Nylund, H., Kirman, B., Koho, M., Tapaninaho, M. & Torvinen, S., 2012, In : International Journal of Advanced Manufacturing Systems. 14, 2, p. 9-16

    Research output: Contribution to journalArticleScientificpeer-review

  95. Published

    On the equivalence of minimum compliance and stress-constrained minimum weight design of trusses under multiple loading conditions

    Mela, K. & Koski, J., 2012, In : Structural and Multidisciplinary Optimization. 46, 5, p. 679-691

    Research output: Contribution to journalArticleScientificpeer-review

  96. Published

    Direct computation of critical equilibrium states for spatial beams and frames

    Mäkinen, J., Kouhia, R., Fedoroff, A. & Marjamäki, H., 2012, In : International Journal for Numerical Methods in Engineering. 89, 2, p. 135-153

    Research output: Contribution to journalArticleScientificpeer-review

  97. Published

    A Petri net-based approach to incremental modelling of flow and resources in service-oriented manufacturing systems

    Popescu, C., Cavia Soto, M. & Martinez Lastra, J. L., 2012, In : International Journal of Production Research. 50, 2, p. 325-343

    Research output: Contribution to journalArticleScientificpeer-review

  98. Published

    An Exceptional Generalization of the Poisson Distribution

    Hagmark, P-E., 2012, In : Open Journal of Statistics. 2, p. 313-318

    Research output: Contribution to journalArticleScientificpeer-review

  99. Published

    Optimized laser processing of calibration blocks for grinding burn detection with Barkhausen noise

    Santa-aho, S., Vippola, M., Sorsa, A., Lindgren, M., Latokartano, J., Leiviskä, K. & Lepistö, T., 2012, In : Journal of Materials Processing Technology. 212, p. 2282-2293

    Research output: Contribution to journalArticleScientificpeer-review

  100. Published

    Precise online auto-focus system in high speed laser micromachining applications

    Määttänen, A., Hautala, V. & Vihinen, J., 2012, In : Physics Procedia. 39, p. 807-813

    Research output: Contribution to journalArticleScientificpeer-review

  101. Published

    A simple J2-plasticity -damage model for metals in the small strain regime

    Saksala, T., 2012, In : Rakenteiden mekaniikka. 45, 2, p. 59-71

    Research output: Contribution to journalArticleScientificpeer-review

Previous 1 2 3 4 5 6 7 8 ...15 Next

ID: 22256