Tampere University of Technology

TUTCRIS Research Portal

Department of Mechanical Engineering and Industrial Systems

Research unit: Department

  1. 2017
  2. Published

    Pedagogical Content Knowledge in Product Development Education

    Juuti, T., Rättyä, K., Lehtonen, T. & Kopra, M-J., 7 Sep 2017, Proceedings of the 19th International Conference on Engineering and Production Design Education, 2017, Oslo, Norway, 7th - 8th September 2017 . The Design Society, p. 483-488 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  3. Published

    Engineering design analysis tool for early design phase with low-fidelity models – a case of hydraulic crane

    Ellman, A., Pajunen, S., Laine, I. & Coatanea, E., 6 Aug 2017, ASME 2017 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference: Volume 1: 37th Computers and Information in Engineering Conference, August 6-9, 2017, Cleveland, Ohio, USA.. American Society of Mechanical Engineers(ASME), 10 p. DECT2017-67493

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  4. Published

    Conjugated heat transfer from a uniformly heated plate and a plate fin with uniform base heat flux

    Lindstedt, M. & Karvinen, R., Apr 2017, In : International Journal of Heat and Mass Transfer. 107, p. 89-95 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  5. Published

    Continuum approach for modeling fatigue in amorphous glassy polymers. Applications to the investigation of damage-ratcheting interaction in polycarbonate

    Holopainen, S., Barriere, T., Cheng, G. & Kouhia, R., Apr 2017, In : International Journal of Plasticity. 91, p. 109-133 24 p.

    Research output: Contribution to journalArticleScientificpeer-review

  6. Published

    Effect of Laser Power on Yield of TiO2 Nanoparticles Synthesized by Pulsed Laser Ablation in Water

    Singh, A., Vihinen, J., Frankberg, E., Hyvärinen, L., Honkanen, M. & Levänen, E., Mar 2017, In : Journal of Ceramic Science and Technology. 8, 1, p. 39-43 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  7. Published

    UV exposure in artificial and natural weathering: A comparative study

    Heikkilä, A., Kazadzis, S., Meinander, O., Vaskuri, A., Kärhä, P., Mylläri, V., Syrjälä, S. & Koskela, T., 22 Feb 2017, RADIATION PROCESSES IN THE ATMOSPHERE AND OCEAN (IRS2016): Proceedings of the International Radiation Symposium (IRC/IAMAS). American Institute of Physics, 110004. (AIP conference proceedings; vol. 1810).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  8. Published

    A new paradigm for fatigue analysis - evolution equation based continuum approach

    Jussila, J., Holopainen, S., Kaarakka, T., Kouhia, R., Mäkinen, J., Orelma, H., Ottosen, N. S., Matti, R. & Saksala, T., 2017, In : Rakenteiden mekaniikka. 50, 3, p. 333-336 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  9. Published

    Continuum modelling of dynamic rock fracture under triaxial confinement

    Saksala, T., Hokka, M. & Kuokkala, V-T., 2017, 14th International Conference on Fracture, Proceedings of ICF 14 : Rhodes, Greece, June 18-23, 2017. 2 p. 822

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  10. Published

    Effect of humidity on triboelectric charging in a vertically vibrated granular bed: Experiments and modeling

    Kolehmainen, J., Sippola, P., Raitanen, O., Ozel, A., Boyce, C. M., Saarenrinne, P. & Sundaresan, S., 2017, In : Chemical Engineering Science. 173, p. 363-373 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  11. Published

    Fatigue Lifetime Estimation of Machine Component Using Accelerated Testing

    Hietala, J-P., Ojala, P., Multanen, P., Miettinen, J. & Saarenrinne, P., 2017, ESREL 2017. CRC Press

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  12. Published

    Heat Transfer of Impinging Jet: Effect of Compressibility and Turbulent Kinetic Energy Production

    Mikkonen, A. & Karvinen, R., 2017, IX International Conference on Computational Heat and Mass Transfer (ICCHMT 2016) .

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  13. Published

    Numerical 3D modelling of the effects of strain rate and confining pressure on the compressive behavior of Kuru granite

    Saksala, T., Hokka, M. & Kuokkala, V-T., 2017, In : Computers and Geotechnics. 88, p. 1-8 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  14. Published

    Numerical modelling of dynamic Brazilian disc test on thermal shock weakened granite

    Saksala, T., 2017.

    Research output: Other conference contributionPaper, poster or abstractScientific

  15. Published

    Structures and properties of laser-assisted cold-sprayed aluminum coatings

    Koivuluoto, H., Milanti, A., Bolelli, G., Latokartano, J., Marra, F., Pulci, G., Vihinen, J., Lusvarghi, L. & Vuoristo, P., 2017, THERMEC 2016. Trans Tech Publications Ltd, Vol. 879. p. 984-989 6 p. (Materials Science Forum; vol. 879).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  16. 2016
  17. Published

    An investigation of fatigue damage development under complete contact fretting test conditions

    Holopainen, S., Juoksukangas, J., Kouhia, R., Lehtovaara, A. & Saksala, T., 30 Dec 2016, In : Rakenteiden mekaniikka. 49, 3, p. 151-159 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  18. Published

    Interaction of Bootstrap Reservoir and Hydraulic Pump in Aircraft Hydraulic Systems

    Aaltonen, J., 20 Dec 2016, Tampere University of Technology. 106 p. (Tampere University of Technology. Publication; vol. 1448)

    Research output: Book/ReportDoctoral thesisMonograph

  19. Published

    Early stage design of a spherical underwater robotic vehicle

    Zavari, S., Heininen, A., Aaltonen, J. & Koskinen, K. T., 19 Dec 2016, 2016 20th International Conference on System Theory, Control and Computing (ICSTCC). IEEE, p. 240-244 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  20. Published

    Muodonmuutoksen mitat kontinuumimekaniikassa

    Hartikainen, J., Kouhia, R., Mikkola, M. & Mäkinen, J., 9 Dec 2016, In : Rakenteiden mekaniikka. 49, 2, p. 86-99 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  21. Published

    On optimisation of structures under stability constraints - a simple example

    Kouhia, R., Pajunen, S. & Poutala, J., 9 Dec 2016, In : Rakenteiden mekaniikka. 49, 2, p. 69-77 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  22. Published

    Optimal control of pump rotational speed in filling and emptying a reservoir: minimum energy consumption with fixed time

    Lindstedt, M. & Karvinen, R., Dec 2016, In : Energy Efficiency. 9, 6, p. 1461–1474 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  23. Published

    Multi-Objective Optimization of Fin Array Heat Sinks

    Lampio, K. & Karvinen, R., 21 Nov 2016, Therminic 2016: 22nd international workshop Thermal investigations of ICs and Systems. IEEE, 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  24. Published

    Unsteady laminar boundary layers of rainbow trout swimming in turbulent flows

    Yanase, K. & Saarenrinne, P., 8 Nov 2016, In : Biology Open. 33 p.

    Research output: Contribution to journalArticleScientificpeer-review

  25. Published

    Continuum approach for modelling transversely isotropic high-cycle fatigue

    Holopainen, S., Kouhia, R. & Saksala, T., 1 Nov 2016, In : EUROPEAN JOURNAL OF MECHANICS A: SOLIDS. 60, p. 183-195

    Research output: Contribution to journalArticleScientificpeer-review

  26. Published

    Persistent Business Transformation with Product Knowledge and Lifecycle Management

    Pulkkinen, A. (ed.), Leino, S-P. (ed.) & Papinniemi, J. (ed.), Nov 2016, DIMECC MANU – Future Digital Manufacturing Final Report. Syrjälä, K. (ed.). 2016 ed. Tampere: Teknologiainfo Teknova, Vol. 10. (Dimecc Publications Series).

    Research output: Chapter in Book/Report/Conference proceedingChapterProfessional

  27. Published

    Modeling and experimental verification of magneto‐mechanical energy harvesting device based on construction steel

    Ahmed, U., Ruuskanen, P., Kouhia, R., Rasilo, P. & Poutala, J., 31 Oct 2016. 4 p.

    Research output: Other conference contributionPaper, poster or abstractScientific

  28. Published
  29. Published

    Development of process for adaptive lifetime estimation of mechanical assemblies using accelerated testing methods

    Hietala, J-P., Ojala, P., Multanen, P., Miettinen, J. & Saarenrinne, P., 26 Oct 2016, Risk, Reliability and Safety: Innovating Theory and Practice : Proceedings of the 26th European Safety and Reliability Conference, ESREL 2016, Glasgow, Scotland, 25-29 September 2016. Walls, L., Revie, M. & Bedford, T. (eds.). CRC Press; Taylor & Francis, 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  30. Published

    Low-fidelity design analysis tool for early design phase

    Ellman, A., 10 Oct 2016, Proceedings of the 1st Annual SMACC Research Seminar 2016. p. 90-93 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  31. Published
  32. Published

    Proceedings of the 1st Annual SMACC Research Seminar 2016

    Aaltonen, J. (ed.), Virkkunen, R. (ed.), Koskinen, K. T. (ed.) & Kuivanen, R. (ed.), 2 Oct 2016, Tampere: Tampere University of Technology. 113 p.

    Research output: Book/ReportAnthologyProfessional

  33. Published

    Solar Panel Breakage During Heavy Rain Caused by Thermal Stress

    Mikkonen, A. & Karvinen, R., Oct 2016, Engineered Transparency 2016: Glass in Architechture and Structural Engineering. Wiley

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  34. Published

    Toward Developing Surrogate Model Integrating Multi-physics, Multi-criteria Models for Additive Manufacturing Technologies

    Mokhtarian, H., Coatanea, E., Paris, H., Vihinen, J., Ikkala, K. & Kiviö, J., Oct 2016, Proceedings of the 1st Annual SMACC Research Seminar 2016. p. 40-42

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  35. Published

    Modelling and Simulation of Radial Spruce Compression to Optimize Energy Efficiency in Mechanical Pulping

    Moilanen, C., Björkqvist, T., Ovaska, M., Koivisto, J., Miksic, A., Engberg, B., Salminen, L., Saarenrinne, P. & Alava, M., 26 Sep 2016, 2016 International Mechanical Pulping (IMPC) Conference Proceedings, Monday, September 26 - Wednesday, September 28, Jacksonville, Florida, USA. USA: TAPPI, p. 53-70 18 p. 1.3

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  36. Published

    Analysis of Inter-firm Co-operation in Joint Research and Development Projects

    Majuri, M., Nylund, H. & Lanz, M., 1 Sep 2016, Advances in Production Management Systems: Initiatives for a Sustainable World - IFIP WG 5.7 International Conference, APMS 2016, Revised Selected Papers. p. 536-543 8 p. (IFIP Advances in Information and Communication Technology).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  37. Published

    Stress relaxation in tempered glass caused by heat soak testing

    Schneider, J., Hilcken, J., Aronen, A., Karvinen, R., Olesen, J. F. & Nielsen, J., 1 Sep 2016, In : Engineering Structures. 122, p. 42-49 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  38. Published

    Agility Challenges in Finnish Manufacturing Companies – Manufacturing Operations Management Viewpoint

    Järvenpää, E., Lanz, M. & Lammervo, E., Sep 2016, Advances in Production Management Systems: Initiatives for a Sustainable World - IFIP WG 5.7 International Conference, APMS 2016, Revised Selected Papers. Springer, p. 130-137 8 p. (IFIP Advances in Information and Communication Technology; vol. 488).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  39. Published

    Formal Information Model for Representing Production Resources

    Siltala, N., Järvenpää, E. & Lanz, M., Sep 2016, Advances in Production Management Systems: Initiatives for a Sustainable World - IFIP WG 5.7 International Conference, APMS 2016, Revised Selected Papers. Springer, p. 53-60 8 p. (IFIP Advances in Information and Communication Technology; vol. 488).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  40. Published

    Multi-objective optimization of electronics heat sinks cooled by natural convection

    Lampio, K. & Karvinen, R., Sep 2016, In : Journal of Physics: Conference Series. 745, 3, 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  41. Published

    A Network based modelling approach using the dimensional analysis conceptual modeling (DACM) framework for additive manufacturing technologies

    Mokhtarian, H., Coatanea, E., Paris, H., Ritola, T., Ellman, A., Vihinen, J., Koskinen, K. & Ikkala, K., 21 Aug 2016, Proceedings of the ASME 2016 Computers and Information in Engineering Conference IDETC/CIE 2016. Charlotte, North Carolina : ASME, 9 p. DETC2016-60473

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  42. Published

    Framework and feasibility study for pairwise comparison tool

    Ellman, A., Wendrich, R. & Tiainen, T., 21 Aug 2016, Proceedings of the ASME 2016 Computers and Information in Engineering Conference IDETC/CIE 2016. Charlotte, North Carolina: ASME, 7 p. DETC2016-59886

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  43. Published

    A Flow Model for Contract Car Manufacturing Project

    Becker, I., 18 Aug 2016, Tampere University of Technology. 141 p. (Tampere University of Technology. Publication; vol. 1397)

    Research output: Book/ReportDoctoral thesisMonograph

  44. Published

    NPD Risk Management with Experiential Learning Oriented Method

    Juuti, T. & Kopra, M-J., 12 Aug 2016, NordDesign 2016 Proceedings Part2. Trondheim, p. 390-399

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  45. Published

    Achieving Benefits with Design Reuse in Manufacturing Industry

    Pakkanen, J., Huhtala, P., Juuti, T. & Lehtonen, T., 9 Aug 2016, 26th CIRP Design Conference. Vol. 50. p. 8-13 6 p. (Procedia CIRP; vol. 50).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  46. Published

    Formal Resource and Capability Descriptions Supporting Rapid Reconfiguration of Assembly Systems

    Järvenpää, E., Siltala, N. & Lanz, M., Aug 2016, Proceedings of the 12th Conference on Automation Science and Engineering, and International Symposium on Assembly and Manufacturing. IEEE, p. 120-125 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  47. Published

    Formal Digital Description of Production Equipment Modules for supporting System Design and Deployment

    Siltala, N., 12 Jul 2016, Tampere University of Technology. 211 p. (Tampere University of Technology. Publication; vol. 1402)

    Research output: Book/ReportDoctoral thesisMonograph

  48. Published

    A conceptual modeling and simulation framework for system Design

    Coatanea, E., Roca, R., Mokhtarian, H., Mokammel, F. & Ikkala, K., 1 Jul 2016, In : Computing in Science and Engineering. 18, 4, p. 42-52

    Research output: Contribution to journalArticleScientificpeer-review

  49. Published

    Big data tulee - mitä se tarkoittaa

    Holopainen, S., 15 Jun 2016, In : Futura. 2, p. 5 - 18 14 p., 2.

    Research output: Contribution to journalArticleScientificpeer-review

  50. Published

    Big data tulee – nykytila ja tulevaisuuden mahdollisuudet

    Holopainen, S. (Guest ed.) & Kuusi, O. (Guest ed.), Jun 2016, In : Futura. 2, 113 p.

    Research output: Contribution to journalSpecial issueScientificpeer-review

  51. Published

    Dynamic modelling and fault analysis of wear evolution in rolling bearings

    El-Thalji, I., 26 May 2016, VTT. 80 p. (VTT Science; vol. 127)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  52. Published

    Proceedings of the 10th World Congress on Engineering Asset Management (WCEAM 2015)

    Koskinen, K. T. (ed.), Kortelainen, H. (ed.), Aaltonen, J. (ed.), Uusitalo, T. (ed.), Komonen, K. (ed.), Mathew, J. (ed.) & Laitinen, J. (ed.), 25 Mar 2016, Springer International Publishing. 686 p. (Lecture Notes in Mechanical Engineering)

    Research output: Book/ReportAnthologyScientificpeer-review

  53. Published

    Modeling of Hysteresis Losses in Ferromagnetic Laminations under Mechanical Stress

    Rasilo, P., Singh, D., Aydin, U., Martin, F., Kouhia, R., Belahcen, A. & Arkkio, A., Mar 2016, In : IEEE Transactions on Magnetics. 52, 3, 4 p., 7300204.

    Research output: Contribution to journalArticleScientificpeer-review

  54. Published

    Lean manufacturing methods in simulation literature: Review and association analysis

    Tokola, H., Niemi, E. & Väistö, V., 16 Feb 2016, 2015 Winter Simulation Conference (WSC). p. 2239-2248 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  55. Published

    High strain rate radial compression of Norway spruce earlywood and latewood

    Moilanen, C. S., Björkqvist, T., Engberg, B. A., Salminen, L. I. & Saarenrinne, P., 1 Feb 2016, In : Cellulose. 23, 1, p. 873-889 17 p.

    Research output: Contribution to journalArticleScientificpeer-review

  56. Published

    Importance of maintenance data quality in extended warranty simulation

    Mahlamäki, K., Niemi, A., Jokinen, J. & Borgman, J., 1 Jan 2016, In : International Journal of COMADEM. 19, 1, p. 3-10 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  57. Published

    A continuum damage model for creep fracture and fatigue analyses

    Kauppila, P., Kouhia, R., Ojanperä, J., Saksala, T. & Sorjonen, T., 2016, 21st European Conference on Fracture, ECF21, 20-24 June 2016, Catania, Italy. p. 887–894 8 p. (Procedia Structural Integrity; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  58. Published

    A follow-up case study of the relation of PLM Architecture, Maturity and Business processes

    Vainio, V. V. & Pulkkinen, A., 2016, Product Lifecycle Management in the Era of Internet of Things: 12th IFIP WG 5.1 International Conference, PLM 2015, Doha, Qatar, October 19-21, 2015, Revised Selected Papers. Springer New York LLC, p. 867-873 7 p. (IFIP Advances in Information and Communication Technology; vol. 467).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  59. Published

    Application of a Capability-based Adaptation Methodology to a Small-size Production System

    Järvenpää, E., Lanz, M. & Tuokko, R., 2016, In : International Journal of Manufacturing Technology and Management. 30, 1/2, p. 67-86 20 p.

    Research output: Contribution to journalArticleScientificpeer-review

  60. Published

    A unified lcf-hcf model based on continuum mechanics

    Kouhia, R., Holopainen, S., Ottosen, N. S., Matti, R. & Saksala, T., 2016. 4 p.

    Research output: Other conference contributionPaper, poster or abstractScientific

  61. Published

    Brownfield Process: A method for modular product family development aiming for product configuration

    Pakkanen, J., Juuti, T. & Lehtonen, T., 2016, In : DESIGN STUDIES. 45B, p. 210-241 32 p.

    Research output: Contribution to journalArticleScientificpeer-review

  62. Published

    Challenges and opportunities in capturing design knowledge

    Lehtonen, T., Halonen, N., Pakkanen, J., Juuti, T. & Huhtala, P., 2016, Proceedings of the 10th World Congress on Engineering Asset Management (WCEAM 2015). Springer International Publishing, p. 389-395 8 p. (Lecture Notes in Mechanical Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  63. Published

    Challenges of Knowledge and Information Management during New Product Introduction: Experiences from a Finnish Multinational Company

    Järvenpää, E., Kopra, M-J. & Lanz, M., 2016, In : Interdisciplinary Journal of Information, Knowledge, and Management. 11, p. 285 308 p.

    Research output: Contribution to journalArticleScientificpeer-review

  64. Published

    Characterising the industrial context of engineering change management

    Pulkkinen, A., Huhtala, P., Leino, S-P., Anttila, J. P. & Vainio, V. V., 2016, Product Lifecycle Management in the Era of Internet of Things: 12th IFIP WG 5.1 International Conference, PLM 2015, Doha, Qatar, October 19-21, 2015, Revised Selected Papers. Springer New York LLC, p. 618-627 10 p. (IFIP Advances in Information and Communication Technology; vol. 467).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  65. Published

    Characterization of the cutting parameters in comparison to the machine tool input power

    Ikkala, K., Kiviö, J., Mokhtarian, H. & Coatanea, E., 2016, 26th International Conference on Flexible Automation and Inteligent Manufacturing, FAIM 2016, KSTC Seoul.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  66. Published

    Closing the Gap – Improving Production Control with a New Layer of Decision Making

    Toivonen, V., Järvenpää, E. & Lanz, M., 2016, Proceedings of the 26th International conference on Flexible Automation and Intelligent Manufacturing (FAIM2016). p. 1042-1049 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  67. Published

    Comparative environmental impacts of additive and subtractive manufacturing technologies

    Paris, H., Mokhtarian, H., Coatanéa, E., Museau, M. & Ituarte, I. F., 2016, In : CIRP Annals: Manufacturing Technology. 65, 1, p. 29-32

    Research output: Contribution to journalArticleScientificpeer-review

  68. Published

    Computational modelling of transversely isotropic high-cycle fatigue using a continuum based model

    Holopainen, S., Kouhia, R., Könnö, J. & Saksala, T., 2016, 21st European Conference on Fracture, ECF21, 20-24 June 2016, Catania, Italy. p. 2718–2725 8 p. (Procedia Structural Integrity; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  69. Published

    Designing manufacturing dashboards on the basis of a Key Performance Indicator survey

    Tokola, H., Järvenpää, E., Gröger, C. & Niemi, E., 2016, 49th CIRP Conference on Manufacturing Systems (CIRP-CMS 2016) . Elsevier, (Procedia CIRP).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  70. Published

    Development and numerical implementation of an anisotropic continuum damage model for concrete

    Hartikainen, J., Kolari, K. & Kouhia, R., 2016, Advances in Fracture and Damage Mechanics XV. Trans Tech Publications Ltd, p. 115-118 4 p. (Key Engineering Materials; vol. 713).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  71. Published

    Evolution equations based approach for modeling of fatigue in amorphous glassy polymers. On the investigation of fatigue damage development in polycarbonate

    Holopainen, S., 2016, Proc. of VII European Congress on Computational Methods in Applied Sciences and Engineering , ECCOMAS Congress 2016. : M. Papadrakakis, V. Papadopoulos, G. Stefanou, V. Plevris (eds.) . Crete Island, Greece, 5 – 10 June 2016. Papadrakakis, M., Papadopoulos, V., Stefanou, G. & Plevris, V. (eds.). p. 6675-6687 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  72. Published

    Exercise loading history and femoral neck strength in a sideways fall: A three-dimensional finite element modeling study.

    Abe, S., Narra, N., Nikander, R., Hyttinen, J., Kouhia, R. & Sievänen, H., 2016, In : Bone. 92, p. 9-17 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  73. Published

    How to benefit from learning logs in engineering education?

    Juuti, T., Kopra, M. J., Rättyä, K. & Lehtonen, T., 2016, 44th Annual Conference of the European Society for Engineering Education - Engineering Education on Top of the World: Industry-University Cooperation, SEFI 2016. European Society for Engineering Education SEFI

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  74. Published

    Improving performance in public services. Tools and implications of multiple criteria staff scheduling and ranking

    Holopainen, S. & Vilko, J., 2016, Proc. of the 13th International Conference on Service Systems and Service Management ICSSSM’16 : 24 - 26 June, 2016. Kunming, China. Jian, C. (ed.). 6 p. (International Conference on Service Systems and Service Management proceedings ).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  75. Published

    Leadership instead of grading - The new goals of assessment

    Lehtonen, T., Juuti, T., Vanhatalo, M., Kopra, M. J. & Rättyä, K., 2016, 44th Annual Conference of the European Society for Engineering Education - Engineering Education on Top of the World: Industry-University Cooperation, SEFI 2016. European Society for Engineering Education SEFI, 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  76. Published

    LeanMES Concept – An Approach to Manage Order-Delivery Information in a Production Network

    Järvenpää, E., Toivonen, V., Lanz, M. & Nieminen, H., 2016, Proceedings of the 26th International conference on Flexible Automation and Intelligent Manufacturing (FAIM2016). p. 988-995 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  77. Published

    Learning logs in product development education

    Juuti, T., Rättyä, K. & Lehtonen, T., 2016, Proceedings of the 18th International Conference on Engineering and Product Design Education: Design Education: Collaboration and Cross-Disciplinarity, E and PDE 2016. Institution of Engineering Designers, The Design Society, p. 296-301 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  78. Published

    Management of distributed knowledge encapsulated in embedded devices

    Ramis Ferrer, B., Iarovyi, S., Gonzalez, L., Lobov, A. & Martinez Lastra, J. L., 2016, In : International Journal of Production Research. 54, 18, p. 1-18 18 p.

    Research output: Contribution to journalArticleScientificpeer-review

  79. Published

    Modelling of Dynamic Rock Fracture Process with a Rate-Dependent Combined Continuum Damage-Embedded Discontinuity Model Incorporating Microstructure

    Saksala, T., 2016, In : Rock Mechanics and Rock Engineering. 49, p. 3947–3962 16 p.

    Research output: Contribution to journalArticleScientificpeer-review

  80. Published

    Multiaxial magneto-mechanical modelling of electrical machines with hysteresis

    Rasilo, P., Aydin, U., Singh, D., Martin, F., Kouhia, R., Belahcen, A. & Arkkio, A., 2016, Proceedings of the 8th IET International Conference on Power Electronics, Machines and Drives, PEMD 2016. IET, The Institution of Engineering and Technology

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  81. Published

    Numerical modeling of dynamic rock fracture with a combined 3D continuum viscodamage-embedded discontinuity model

    Saksala, T., Brancherie, D. & Ibrahimbegovic, A., 2016, In : International Journal for Numerical and Analytical Methods in Geomechanics. 40, 9, p. 1339–1357 19 p.

    Research output: Contribution to journalArticleScientificpeer-review

  82. Published

    Numerical modelling of quasi-brittle fracture with the rate-dependent multiple embedded discontinuity approach

    Saksala, T., 2016, In : Rakenteiden mekaniikka. 49, 2, p. 25-35 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  83. Published

    Numerical study of the influence of hydrostatic and confining pressure on percussive drilling of hard rock

    Saksala, T., 2016, In : Computers and Geotechnics. 76, p. 120-128 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  84. Published

    Prerequisites and conditions for socially sustainable manufacturing in Europe’s future factories—results overview from the SO SMART project

    Berlin, C., Barletta, I., Fantini, P., Georgoulias, K., Hansich, C., Lanz, M., Latokartano, J., Pinzone, M., Schönborn, G., Stahre, J., Taisch, M. & Tuokko, R., 2016, Advances in Ergonomics of Manufacturing: Managing the Enterprise of the Future - Proceedings of the AHFE International Conference on Human Aspects of Advanced Manufacturing, 2016. Springer Verlag, Vol. 490. p. 319-330 12 p. (Advances in Intelligent Systems and Computing; vol. 490).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  85. Published

    Sensor-assisted Flexible Industrial Robot Workcell: A Case Study

    Halme, J., Changizi, A., Hietanen, A., Latokartano, J., Lanz, M., Kämäräinen, J. & Koskinen, K. T., 2016, Proceedings of the 1st Annual SMACC Research Seminar 2016. p. 61-64 4 p. 14

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  86. Published

    Simulation as a Tool in Evaluating Combat Aircraft Shock Absorber Condition

    Heininen, A., Aaltonen, J., Koskinen, K. T. & Huitula, J., 2016, Proceedings of the 10th World Congress on Engineering Asset Management (Wceam 2015). Koskinen, KT., Kortelainen, H., Aaltonen, J., Uusitalo, T., Komonen, K., Mathew, J. & Laitinen, J. (eds.). Springer-Verlag, Berlin, p. 249-257 9 p. (Lecture Notes in Mechanical Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  87. Published

    Simulation Models Supporting Multiple Assets Along the Product Life Cycle

    Vainio, H., Aaltonen, J., Koskinen, K. T. & Martinsuo, M., 2016, Proceedings of the 10th world congress on engineering asset management (wceam 2015). Koskinen, KT., Kortelainen, H., Aaltonen, J., Uusitalo, T., Komonen, K., Mathew, J. & Laitinen, J. (eds.). Springer-Verlag, Berlin, p. 647-653 7 p. (Lecture Notes in Mechanical Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  88. Published

    Surrogate-model based method and software for practical design optimization problems

    Pajunen, S. & Laakkonen, P., 2016, In : Rakenteiden mekaniikka. 49, 3, p. 100-118 19 p.

    Research output: Contribution to journalArticleScientificpeer-review

  89. Published

    The cross-sectional area of the gluteus maximus muscle varies according to habitual exercise loading: Implications for activity-related and evolutionary studies

    Niinimäki, S., Härkönen, L., Nikander, R., Abe, S., Knüsel, C. & Sievänen, H., 2016, In : HOMO: Journal of Comparative Human Biology. 67, 2, p. 125-137

    Research output: Contribution to journalArticleScientificpeer-review

  90. Published

    Two models for hydraulic cylinders in flexible multibody simulations

    Ylinen, A., Mäkinen, J. & Kouhia, R., 2016, Computational Methods for Solids and Fluids: Multiscale Analysis, Probability Aspects and Model Reduction. Springer, p. 463-493 31 p. (Computational Methods in Applied Sciences; vol. 41).

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  91. Published

    Validity of parameters in static linear testing of flexor tendon repair

    Linnanmäki, L., Göransson, H., Havulinna, J., Sippola, P., Karjalainen, T. & Leppänen, O. V., 2016, In : Journal of Biomechanics. 49, 13, p. 2785–2790

    Research output: Contribution to journalArticleScientificpeer-review

  92. 2015
  93. Published

    Towards a simulation-based product process: SIMPRO research project final report

    Alanen, J., Keränen, J., Kortelainen, J., Muhammad, A., Virtanen, J., Multanen, P., Hietala, J-P., Krogerus, T., Hyvönen, M., Huhtala, K., Pajunen, S., Coatanea, E., Baharudin, E., Matikainen, M., Mikkola, A., Gao, X-Z., Järvenpää, S., Mokammel, F., Ylä-Oijala, P., Zenger, K., Miettinen, K. & Sindhya, K., Dec 2015, VALTION TEKNILLINEN TUTKIMUSKESKUS. 112 p. (VTT Technology; vol. 240)

    Research output: Book/ReportCommissioned reportProfessional

  94. Published

    Heat Transfer Phenomena in Float Glass Heat Treatment Processes

    Rantala, M., 26 Nov 2015, Tampere University of Technology. 135 p. (Tampere University of Technology. Publication; vol. 1355)

    Research output: Book/ReportDoctoral thesisMonograph

  95. Published

    A knowledge-based approach for the selection of assembly equipment based on fuel cell component characteristics

    Ahmad, M., Ahmad, B., Harrison, R., Ramis Ferrer, B., Martinez Lastra, J. L., Meredith, J. & Bindel, A., 1 Nov 2015, IECON 2015 - 41st Annual Conference of the IEEE Industrial Electronics Society. p. 1002-1007 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  96. Published

    Digital image correlation method in hydro turbine shaft torque and vibration monitoring

    Saarenrinne, P., Miettinen, J., Ylönen, M. & Kokko, V., 27 Oct 2015, Proceedings of the Hydro 2015 Bordeaux 26-28 October 2015. Hydro Power & Dams, 8 p. 08.06

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  97. Published

    Productivity measurement at the factory level

    Paranko, J., Paranko, B. & Huhtala, P., 7 Oct 2015, TARC 2015 Trends in accounting research conference : With International PhD Colloquium and Workshop 7-9 th october 2015, Lodz, Poland. Lodz, Poland: University of Lodz, Poland, p. 1-25 25 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  98. Published

    Production of sulfonated polyetheretherketone/polypropylene fibers for photoactive textiles

    Mylläri, V., Fatarella, E., Ruzzante, M., Pogni, R., Baratto, M. C., Skrifvars, M., Syrjälä, S. & Järvelä, P., 1 Oct 2015, In : Journal of Applied Polymer Science. 132, 39, 42595.

    Research output: Contribution to journalArticleScientificpeer-review

  99. Published

    Local oscillation of the boundary layer over the surface of swimming rainbow trout: implications for active drag reduction

    Saarenrinne, P. & Yanase, K., 15 Sep 2015, Proceedings of the 11TH International Symposium on Particle Image Velocimetry – PIV15 . 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  100. Published

    Context-aware knowledge-based middleware for selective information delivery in data-intensive monitoring systems

    Evchina, Y., Puttonen, J., Dvoryanchikova, A. & Martinez Lastra, J. L., Aug 2015, In : Engineering Applications of Artificial Intelligence. 43, p. 111-126 16 p.

    Research output: Contribution to journalArticleScientificpeer-review

  101. Published

    High temperature erosion wear of cermet particles reinforced self-fluxing alloy HVOF sprayed coatings

    Surzhenkov, A., Goljandin, D., Traksmaa, R., Viljus, M., Talviste, K., Aruniit, A., Latokartano, J. & Kulu, P., 27 Jul 2015, In : Materials Science: Medziagotyra. 21, 3, p. 386-390 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  102. Published

    Successful Industrial and Academia Cooperation in Technology Industry

    Riitahuhta, A. & Oja, H., 12 Jul 2015, Impact of Design Research on Industrial Practice: Tools, Technology, and Training. Chakrabarti, A. & Lindemann, U. (eds.). Springer International Publishing, p. 269-280 12 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  103. Published

    A comparison of rheology and FTIR in the study of polypropylene and polystyrene photodegradation

    Mylläri, V., Ruoko, T-P. & Syrjälä, S., 1 Jul 2015, In : Journal of Applied Polymer Science. 132, 28, 6 p., 42246.

    Research output: Contribution to journalArticleScientificpeer-review

Previous 1 2 3 4 5 6 7 8 ...15 Next

ID: 22256