Tampere University of Technology

TUTCRIS Research Portal

Department of Mechanical Engineering and Industrial Systems

Research unit: Department

  1. Published

    Configuration of Wärtsilä Diesel Power Plant's Fuel System

    Aaltonen, A., Paasiala, P., Tanskanen, K. & Riitahuhta, A., 1995, Proceedings of ICED 95, 10th International Conference on Engineering Design, August 22-24, 1995, Praque. p. 1501-1506

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  2. Published

    Engineering Knowledge Systematization for Knowledge Based Expert System and Object-Oriented Database

    Aaltonen, A., 1996, Tampere: Tampereen teknillinen korkeakoulu. 87 p. (Tampereen teknillinen korkeakoulu, Konetekniikan osasto, Koneensuunnittelu; no. 62)

    Research output: Book/ReportCommissioned reportProfessional

  3. Published

    Ohjeita koneensuunnittelun laitoksen kuormituskertymä ohjelmiin

    Aaltonen, A., 1991, Tampere: Tampereen teknillinen korkeakoulu. 17 p. (Tampereen teknillinen korkeakoulu, Konetekniikan osasto, Koneensuunnittelu, Raportti; no. 38)

    Research output: Book/ReportCommissioned reportProfessional

  4. Published

    Automaattinen komponenttien valintajärjestelmä

    Aaltonen, A., Paasiala, P. & Riitahuhta, A., 1993, Koneensuunnittelun XVIII kansallinen symposiumi Oulussa 7.-8.6.1993. Leinonen, T. (ed.). Oulu, p. 26-35 (Oulun yliopisto, Raportti; no. 92).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  5. Published

    Interaction of Bootstrap Reservoir and Hydraulic Pump in Aircraft Hydraulic Systems

    Aaltonen, J., 20 Dec 2016, Tampere University of Technology. 106 p. (Tampere University of Technology. Publication; vol. 1448)

    Research output: Book/ReportDoctoral thesisMonograph

  6. Published

    Design and First Operating Experiences with Extreme Value Research Engine EVE

    Aaltonen, J., Turunen, R., Kallio, I., Leino, A., Rantanen, P., Suokas, M., Ranta, O., Karila, K. & Liljenfeldt, G., 7 Jun 2004, In : CIMAC Congress 2004, Kyoto, Japan. p. 1-7 7 p., 32.

    Research output: Contribution to journalArticleScientificpeer-review

  7. Published

    Proceedings of the 1st Annual SMACC Research Seminar 2016

    Aaltonen, J. (ed.), Virkkunen, R. (ed.), Koskinen, K. T. (ed.) & Kuivanen, R. (ed.), 2 Oct 2016, Tampere: Tampere University of Technology. 113 p.

    Research output: Book/ReportAnthologyProfessional

  8. Published

    Experiences from Developing Configuration Applications

    Aaltonen, A., Paasiala, P., Tanskanen, K. & Riitahuhta, A., 1995, Proceedings of Produktmodeller -95, Linköping, Sweden, 1995. p. 155-165

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  9. Published

    Simulation Based Methods for Flexible Maintenance Program Development

    Aaltonen, J., Koskinen, K. T., Vainio, H. & Martinsuo, M., 2014, EuroMaintenance 2014, Congress proceedings May 5-7, Helsinki, Finland, 22nd European Congress & Expo on Maintenance and Asset Management, 6th World Congress & Global Forum on Maintenance and Asset Management. European Federation of National Maintenance Societies, p. 446-450 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  10. Published

    Prosessilaitosten projektitoiminta

    Aaltonen, A., 1995, Tampere: Tampereen teknillinen korkeakoulu. 20 p. (Tampereen teknillinen korkeakoulu, Koneensuunnittelu, Raportti; no. 56)

    Research output: Book/ReportCommissioned reportProfessional

  11. Published

    Automaattinen komponenttien valinta

    Aaltonen, A., 1993, In : Valokynä. 3, p. 11-13

    Research output: Contribution to journalArticleProfessional

  12. Published

    Prodeal-ohjelma. Prosessilaitosten projektitoiminnan kehittäminen

    Aaltonen, A. & Riitahuhta, A., 1995, In : Projektitoiminta. 1, p. 12-13

    Research output: Contribution to journalArticleProfessional

  13. Published

    Prosessilaitoksen projektitoiminnan kehittäminen tietotekniikan avulla

    Aaltonen, A. & Riitahuhta, A., 1995, In : Valokynä. 1, p. 10-11

    Research output: Contribution to journalArticleProfessional

  14. Published

    Modularisation by Integratin (MBI) a means to Modularise A Mechatronic Product

    Aarnio, J. & Riitahuhta, A., 2002, In: Boelskifte, P., Sigurjonsson, J.B. Proceedings of the NordDesign 2002, August 14-16, 2002, NTNU, Trondheim, Norway. Trondheim, p. 8 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  15. Published

    Modularization of the control system in a mechatronic product

    Aarnio, J. P. & Riitahuhta, A. O., 2001, Proceedings of 13th International Conference on Engineering Design - ICED 01, 21-23 August 2001, Glasgow, UK. Culley, S., Duffy, A., McMahon, C. & Wallace, K. (eds.). p. 555-562

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  16. Published

    Exploration of different boundary conditions in the sideways falling situation in hip fracture finite element modelling

    Abe, S., Ylinen, A., Narra Girish, N., Nikander, R., Hyttinen, J., Kouhia, R. & Sievänen, H., 2015, Proceeding of the XII Finnish Mechanics Days. Rakenteiden Mekaniikan Seura ry, p. 130-135 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  17. Published

    Exercise loading history and femoral neck strength in a sideways fall: A three-dimensional finite element modeling study.

    Abe, S., Narra, N., Nikander, R., Hyttinen, J., Kouhia, R. & Sievänen, H., 2016, In : Bone. 92, p. 9-17 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  18. Published

    A knowledge-based approach for the selection of assembly equipment based on fuel cell component characteristics

    Ahmad, M., Ahmad, B., Harrison, R., Ramis Ferrer, B., Martinez Lastra, J. L., Meredith, J. & Bindel, A., 1 Nov 2015, IECON 2015 - 41st Annual Conference of the IEEE Industrial Electronics Society. p. 1002-1007 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  19. Published

    Formal modelling of complex event processing: a generic algorithm and its application to a manufacturing line

    Ahmad, W., Lobov, A. & Martinez Lastra, J. L., 2012, Proceedings of IEEE 10th International Conference on Industrial Informatics, INDIN 2012, 25-27 July, 2012, Beijing, China. Piscataway, NJ: IEEE, p. 380-385 (IEEE International Conference on Industrial Informatics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  20. Published

    Modeling and experimental verification of magneto‐mechanical energy harvesting device based on construction steel

    Ahmed, U., Ruuskanen, P., Kouhia, R., Rasilo, P. & Poutala, J., 31 Oct 2016. 4 p.

    Research output: Other conference contributionPaper, poster or abstractScientific

  21. Published

    Tribology in Finland

    Aho, K., 1980, In : Tribology International. 13, 1, p. s. 31

    Research output: Contribution to journalArticleScientificpeer-review

  22. Published

    Tuotekehitys yhdeksänkymmentäluvulla

    Aho, K., 1994, Koneensuunnittelun XIX kansallinen symposiumi, 8.-9.6.1994, Lappeenranta. Lappeenranta, p. 159-172

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  23. Published

    Tribologian asema Japanissa

    Aho, K., 1985, In : Tribologia - Finnish Journal of Tribology. 4, 4, p. 1-12 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  24. Published

    Konferenssiraportti: 9th international conference on engineering design, Koneensuunnittelun raportti

    Aho, K., 1994, Tampere: Tampereen teknillinen korkeakoulu. 18 p. (Tampereen teknillinen korkeakoulu, Koneensuunnittelu, Raportti; no. 51)

    Research output: Book/ReportCommissioned reportProfessional

  25. Published

    The Fourth Year's Engineering Design Course as Bridge from University to Industry

    Aho, K., 1987, SEFI Annual Conference, Helsinki University of Technology, 29.6.-2.7., Proc.. Helsinki, p. 525-529

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  26. Published

    Kitka

    Aho, K. & Lehtovaara, A., 1988, Tribologia. p. 10-24

    Research output: Chapter in Book/Report/Conference proceedingChapterProfessional

  27. Published

    Pohjoismainen koneprofessorien kokous NPM-80, Islannin yliopistossam Reykjavikissa 9-11.6.1980

    Aho, K., 1980, Tampere: Tampereen teknillinen korkeakoulu. (Tampereen teknillinen korkeakoulu, konetekniikan osasto, koneensuunnittelu, raportti; no. 12)

    Research output: Book/ReportCommissioned reportProfessional

  28. Published

    The influence of surface roughness on the load carrying capacity of contacting surfaces

    Aho, K., 1985, In : Tribologia - Finnish Journal of Tribology. 4, 4, p. 17-26

    Research output: Contribution to journalArticleScientificpeer-review

  29. Published

    Liukulaakerivauriot, niiden syyt ja ehkäisy

    Aho, K., 1980, INSKO:n julkaisu 125-80, Kulumisvauriot, niiden ennaltaehkäisy ja korjaus. Helsinki, p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterProfessional

  30. Published

    Teknis-taloudellinen konstruointi

    Aho, K., 1980, VDI 2225, INSKO:n julkaisu 65-80, Tuotekehitys ja sen menetelmät: Optimointi. Helsinki, p. 1-7 7 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterProfessional

  31. Published

    Konstruktiotekniikka I

    Aho, K., 1982, Tampere: Tampereen teknillinen korkeakoulu. (Tampereen teknillinen korkeakoulu, opintomoniste; no. 87)

    Research output: Book/ReportBookProfessional

  32. Published

    Koneensuunnitteluun liittyvän tutkimuksen kehittämistarpeista. Koneensuunnittelun X:n kansallisen symposiumin esitelmät

    Aho, K., 1984, Oulun yliopiston konetekniikan osaston raportti. Oulu, p. 95-104 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  33. Published

    Voideltuna toimivien pintojen kuluminen

    Aho, K., 1986, Tampere: Tampereen teknillinen korkeakoulu. 26 p. (Tampereen teknillinen korkeakoulu, Konetekniikan osasto, Koneensuunnittelu, R aportti; no. 29)

    Research output: Book/ReportCommissioned reportProfessional

  34. Published

    Konferenssiraportti: 10th International Conference on Engineering Design

    Aho, K., 1996, Tampere: Tampereen teknillinen korkeakoulu. 16 p. (Tampereen teknillinen korkeakoulu, Konetekniikan osasto, Koneensuunnittelu; no. 59)

    Research output: Book/ReportCommissioned reportProfessional

  35. Published

    Uusi idea pyörivän akselin tiivistämiseksi

    Aho, K., 1987, In : Tribologia - Finnish Journal of Tribology. 6, 2, p. 24-31

    Research output: Contribution to journalArticleScientificpeer-review

  36. Published

    Konstruktiotekniikka, osa I, Ongelman analysointi ja synteesi

    Aho, K., 1980, Tampere: Tampereen teknillinen korkeakoulu. (Tampereen teknillinen korkeakoulu, opintomoniste)

    Research output: Book/ReportBookProfessional

  37. Published

    Laakeroinnin vaikutus roottorin värähtelyyn

    Aho, K., 1982, In: Värähtely- ja meluongelmat koneenrakennuksessa III, Tampereen teknillinen korkeakoulu, opintomoniste 80. Tampere, p. 1-10 10 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterProfessional

  38. Published

    Nordtrib -84, Nordic Symposium on Tribology, Conference Report

    Aho, K., 1984, In : Tribology International. 17, 6

    Research output: Contribution to journalArticleScientific

  39. Published

    Kiinteiden kappaleiden kosketus

    Aho, K., 1986, Tampere: Tampereen teknillinen korkeakoulu. 22 p. (Tampereen teknillinen korkeakoulu, Konetekniikan osasto, Koneensuunnittelu, R aportti; no. 30)

    Research output: Book/ReportCommissioned reportProfessional

  40. Published

    Liukulaakeroinnin suunnittelun perusteet

    Aho, K., 1982, INSKOn julkaisu, Liuku- ja vierintälaakeroinnin suunnittelu ja valinta. Helsinki, p. 1-25 25 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterProfessional

  41. Published

    Herätteet

    Aho, K., 1980, Tampereen teknillinen korkeakoulu, Opintomoniste, Värähtely- ja meluon koneenrakennuksessa. Tampere, p. 1-14 14 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterProfessional

  42. Published

    Konstruktiotekniikka II

    Aho, K., 1982, Tampere: Tampereen teknillinen korkeakoulu. (Tampereen teknillinen korkeakoulu, opintomoniste; no. 82)

    Research output: Book/ReportBookProfessional

  43. Published

    Mekaanisen laitteen optimaalinen mitoitus käyttäen Johnsonin menetelmää

    Aho, K., 1980, INSKO:n julkaisu 65-80, Tuotekehitys ja sen menetelmät: Optimointi. Helsinki, p. 1-11 11 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterProfessional

  44. Published

    Laakerit

    Aho, K., 1985, In: Koneenosien suunnittelu, luku 3.2. Porvoo: WSOY, p. 44-181

    Research output: Chapter in Book/Report/Conference proceedingChapterProfessional

  45. Published

    Roottorin värähtelyn syistä

    Aho, K., 1982, In: Värähtely- ja meluongelmat koneenrakennuksessa III, Tampereen teknillinen korkeakoulu, opintomoniste 80. Tampere, p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterProfessional

  46. Published

    Mäntäkoneen tribologia

    Aho, K., 1982, In : Finnish Journal of Tribology. 2, p. 50-55

    Research output: Contribution to journalArticleScientificpeer-review

  47. Published

    The development of the chassis for the low-floor bus with light weight structures

    Ahola, E. & Riitahuhta, A., 1996, Proceedings of the NordDesign '96, Espoo, 28.-30.8.1996. Espoo, p. 223-230

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  48. Published

    Asusteen sähkölaitteen tiedonsiirto ja sähköenergian syöttö

    Ahola, E. & Kortesuo, A., 2003, Patent No. FI 110347, Priority date 31 Dec 2002, Priority No. FI 20011037

    Research output: PatentScientific

  49. Published

    Matrix Methods for Analysis and Grouping of Product or Concept Data

    Ahola, E., 2000, Tampere: Tampere University of Technology. 130 p. (Tampereen teknillinen korkeakoulu. Julkaisuja; no. 300)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  50. Published

    Method and apparatus for cooling material by atomised spray

    Ahonen, S., Karvinen, R. & Vainio, T., 31 Dec 2014, IPC No. C03B 27/ 02 A I, Patent No. CN102803520, Priority date 15 Jun 2010, Priority No. WO2010FI50499

    Research output: PatentScientific

Previous 1 2 3 4 5 6 7 8 ...29 Next

ID: 22256