Tampere University of Technology

TUTCRIS Research Portal

Department of Mechanical Engineering and Industrial Systems

Research unit: Department

  1. Published

    25 vuotta suomalaista tribologiaa

    Lehtovaara, A. & Salonen, P., 2003, In : Kunnossapito. 1, p. 8-9

    Research output: Contribution to journalArticleProfessional

  2. Published

    3D-mittausmalli ja dimensionaaliset mittaukset prosessilaitoksen valmistuksessa

    Riitahuhta, A., Rautakorpi, E. & Viitanen, Y., 1993, Proceeding of SIM (Simple Integrated Manufacturing), 2.-3.2.1993, Helsinki. p. 140-143

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  3. Published

    3D numerical modelling of bit-rock fracture mechanisms in percussive drilling with a multiple-button bit

    Saksala, T., 2013, In : International Journal for Numerical and Analytical Methods in Geomechanics. 37, 3, p. 309-324

    Research output: Contribution to journalArticleScientificpeer-review

  4. Published

    3d numerical simulation of rock fracture due to multiple button bit in percussive drilling

    Saksala, T., 2012, Proceedings of the 2012 ISRM International Symposium - EUROCK 2012, Rock Engineering and Technology for Sustainable Underground Construction, 28-30 May Stockholm. International Society for Rock Mechanics ISRM, p. 1-12 12 p. (ISRM International Symposium).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  5. Published

    3D on enemmän kuin 2D + 1D. Kolmiulotteisuus vaatii kulttuurivallankumouksen

    Kaivola, R., 1990, In : Tekniikka & Talous. 30, 73, p. 14-14

    Research output: Contribution to journalArticleProfessional

  6. Published

    A builder for adaptable human machine interfaces for mobile devices

    Neira, O., Nieto Lee, A., Martinez Lastra, J. L. & Camp, R. S., 2013, Proceedings 2013 11the IEEE international conference on industrial informatics INDIN, Bochum, Germany, July 29-31, 2013. Piscataway: Institute of Electrical and Electronics Engineers IEEE, p. 750-755 6 p. (IEEE international conference on industrial informatics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  7. Published

    A case study of share of ICT infrastructure in energy consumption of discrete manufacturing facility

    Sohail, M., Florea, A. & Martinez Lastra, J. L., 2014, 2014 IEEE 15th Workshop on Control and Modeling for Power Electronics (COMPEL), 22-25 Junen 2014, University of Cantabria, Santander, Spain. Piscataway: The Institute of Electrical and Electronics Engineers IEEE, p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  8. Published

    A case study of the rolling contact of a calendar roll

    Järvenpää, V-M., Yuan, L. & Keskinen, E., 2002, In : Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics. 216, p. 327-333

    Research output: Contribution to journalArticleScientificpeer-review

  9. Published

    Accuracy measurements of miniature robot using optical CMM

    Vuola, A. & Tuokko, R., 2012, Precision assembly technologies and systems. Proceedings of the 6th IFIP WG 5.5 International precision assembly seminar, IPAS 2012, 12-14 February, 2012, Chamonix, France. Svetan, R. (ed.). Heidelberg: Springer, p. 126-133 (IFIP Advances in Information and Communication Technology; vol. 371).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  10. Published

    Accuracy of the calculation of heating and cooling energy needs in Nordic conditions

    Kalema, T. & Pylsy, P., 2008, NSB2008 Nordic Symposium on Building Physics 2008, Copenhagen, Denmark, June 16-18, 2008. p. 535-542

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  11. Published

    Accurary of energy analysis of buildings - A comparison of a monthly energy balance method and simulation methods in calculating the energy consumption and the effect of thermal mass

    Kalema, T., Johannesson, G., Pylsy, P. & Hagengran, P., 2008, In : Journal of Building Physics. 32, 2, p. 101-130

    Research output: Contribution to journalArticleScientificpeer-review

  12. Published

    Achieving Benefits with Design Reuse in Manufacturing Industry

    Pakkanen, J., Huhtala, P., Juuti, T. & Lehtonen, T., 9 Aug 2016, 26th CIRP Design Conference. Vol. 50. p. 8-13 6 p. (Procedia CIRP; vol. 50).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  13. Published

    Achieving integrated product and production development with knowledge creation and flow model

    Lehtonen, T., Pakkanen, J., Juuti, T., Vanhatalo, M. & Becker, I., 2012, The 22nd International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2012, 10-13 June, 2012, Helsinki, Finland. Hasse, N., Satu, K., Ville, T. & Seppo, T. (eds.). Tampere: Tampere University of Technology. Department of Production Engineering, p. 357-364 (International Conference on Flexible Automation and Intelligent Manufacturing).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  14. Published

    A co-creation tool in walk-in virtual environment: making prospective work visible

    Tiainen, T., Kaapu, T., Ellman, A. & Kuusisto, J., 2012, Proceedings of the European Conference for Information Systems ECIS 2012, June 10-13, 2012 ESADE, Barcelona, Spain. p. 1-11 11 p. Paper 43. (European Conference on Information Systems).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  15. Published

    A comparison of rheology and FTIR in the study of polypropylene and polystyrene photodegradation

    Mylläri, V., Ruoko, T-P. & Syrjälä, S., 1 Jul 2015, In : Journal of Applied Polymer Science. 132, 28, 6 p., 42246.

    Research output: Contribution to journalArticleScientificpeer-review

  16. Published

    A conceptual modeling and simulation framework for system Design

    Coatanea, E., Roca, R., Mokhtarian, H., Mokammel, F. & Ikkala, K., 1 Jul 2016, In : Computing in Science and Engineering. 18, 4, p. 42-52

    Research output: Contribution to journalArticleScientificpeer-review

  17. Published

    A connectionistic knowledge-based approach to the modelling and control of manufacturing systems

    Dvoryanchikova, A., Hossain, M. M., Lobov, A., Martinez Lastra, J. L. & Hammouda, I., 2008, Proceedings of the Lighthouse of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering, I.T. Revolutions 2008, December 17-19, 2008, Venice, Italy. p. 7 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  18. Published

    A constitutive model for strain-rate dependent ductile-to-brittle transition

    Hartikainen, J., Kolari, K. & Kouhia, R., 2012, Proceedings of the 21st IAHR International Symposium on Ice, Ice Research for Sustainable Environment, Dalian, China, June 11-15, 2012. Zhijun, LI. & Peng, LU. (eds.). Dalian, China: Dalian University of Technology, p. 24-29 (IAHR International Symposium on Ice).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  19. Published

    A contact dynamics formulation for distributed simulation of flexible hydromechanical systems

    Keskinen, E., 1994, Tampere: Tampereen teknillinen korkeakoulu. 131 p. (Tampereen teknillinen korkeakoulu. Julkaisuja; no. 134)

    Research output: Book/ReportDoctoral thesisMonograph

  20. Published

    A Continuum damage model based on Ottosen's four parameter failure criterion for concrete

    Tahaei Yaghoubi, S., Kouhia, R., Hartikainen, J. & Kolari, K., 2014, In : Rakenteiden mekaniikka. 47, 2, p. 50-66 17 p.

    Research output: Contribution to journalArticleScientificpeer-review

  21. Published

    A continuum damage model for creep fracture and fatigue analyses

    Kauppila, P., Kouhia, R., Ojanperä, J., Saksala, T. & Sorjonen, T., 2016, 21st European Conference on Fracture, ECF21, 20-24 June 2016, Catania, Italy. p. 887–894 8 p. (Procedia Structural Integrity; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  22. Published

    A Continuum damage model for quasi-brittle materials

    Yaghoubi, S. T., Kouhia, R., Hartikainen, J. & Kolari, K., 2014, Proceedings of NSCM-27: the 27th Mechanics Nordic Seminar on Computational Mechanics. Eriksson, A., Kulachenko, A., Mihaescu, M. & Tibert, G. (eds.). Stockholm: KTH Mechanics, p. 160-163 4 p. (TRITA-MEK Technical report; no. 24).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  23. Published

    Acoustic emission in monitoring extremely slowly rotating rolling bearing

    Miettinen, J. & Pataniitty, P., 1999, Proceedings of COMADEM '99. McIntyre, J. & Sleeman, D. (eds.). Oxford, p. 289-297

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  24. Published

    Acoustic emission in monitoring sliding contact behaviour

    Miettinen, J. & Siekkinen, V., 1995, In : Wear. 181-183, p. 897-900

    Research output: Contribution to journalArticleScientificpeer-review

  25. Published

    Acoustic Emission Monitoring of Grease Lubricated Rolling Bearings

    Miettinen, J. & Salmenperä, P., 2000, Proceedings of the 13th International Conference Condition Monitoring and Diagnostic Engineering Management, Comadem 2000. p. 21-30

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  26. Published

    Acoustic emission of rolling bearings lubricated with contaminated grease

    Miettinen, J. & Andersson, P., 2000, In : Tribology International. 33, 11, p. 777-787

    Research output: Contribution to journalArticleScientificpeer-review

  27. Published

    Acoustic measurements in condition monitoring

    Salmenperä, P. & Miettinen, J., 2000, Proceedings of the 13th International Congress Condition Monitoring and Diagnostic Engineering Management, Comadem 2000. p. 31-40

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  28. Published

    A cross-layer approach to energy management in manufacturing

    Florea, A., Garcia Izaguirre Montemayor, J. A., Postelnicu, C. & Martinez Lastra, J. L., 2012, Proceedings of IEEE 10th International Conference on Industrial Informatics, INDIN 2012, 25-27 July, 2012, Beijing, China. Piscataway: Institute of Electrical and Electronics Engineers IEEE, p. 304-308 (IEEE International Conference on Industrial Informatics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  29. Published

    Active vibration control and multibody rolling contact system

    Järvenpää, V-M. & Yuan, L., 2009, Motion and Vibration Control. Ulbrich, H. & Ginzinger, L. (eds.). Springer, p. 155-164

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  30. Published

    Active vibration control of multibody rolling contact system

    Järvenpää, V-M. & Yuan, L., 2008, The 9th International Conference on Motion and Vibration Control, MOVIC, September 15-18, 2008, Munich, Germany. p. 10 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  31. Published

    Active vibration control of roll press system by piezoelectric actuators

    Töhönen, M., Seemann, W. & Keskinen, E., 2010, Proceedings of The Post-Graduate Workshop on Intelligent Machines and Transport Systems, May 3-7, 2010, Cern, Switzerland. Karvinen, T. & Keskinen, E. (eds.). p. 134-144

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  32. Published

    Active vibration control of roll press system by piezoelectric actuators

    Töhönen, M. & Seemann, W., 2010, 81st Annual Meeting of the Gesellschaft für Angewandte Mathematik und Mechanik GAMM, 22.-26. March, 2010, Karlsruhe, Germany. Proceedings in Applied Mathematics and Mechanics. p. 265-266

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  33. Published

    Active vibration control of roll system by piezo actuators - literature review

    Töhönen, M. & Keskinen, E., 2008, Fourth Arctic-Mediterranean Post Graduate Workshop on Intelligent Machines and Transport Systems, June 23-27, 2008, Saariselkä, Finland. Karvinen, T. & Keskinen, E. (eds.). p. 64-70

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  34. Published

    Activities and corresponding information flows for production system adaption planning

    Järvenpää, E., Lanz, M., Siltala, N. & Tuokko, R., 2011, Proceedings of the 4th International Swedish Production Symposium, SPS11 3-5 May, 2011, Lund, Sweden. Ståhl, J-E. (ed.). Lund: The Swedish Production Academy, p. 124-133 (International Swedish Production Symposium SPS).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  35. Published

    Activity report of COST Action TU0905 Working Group 2 – Material characterization and material improvement

    Schneider, J., Karvinen, R., Vandebroek, M. & Savineau, G., 2014, Proceedings volume of the Challenging Glass 4 & COST Action TU0905 Final Conference, 6-7 February 2014 at the EPFL in Lausanne, Switzerland. Louter, C., Bos, F., Belis, J. & Lebet, J-P. (eds.). CRC Press, p. 21-24 4 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  36. Published

    Adaptation of manufacturing systems in dynamic environment based on capability description method

    Järvenpää, E., Luostarinen, P., Lanz, M. & Tuokko, R., 2012, Manufacturing systems. Faieza, A. A. (ed.). Rijeka, Croatia: InTech, p. 93-118

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  37. Published

    Adapting variant products for time critical deliveries

    Lehtonen, T., Pulkkinen, A. & Riitahuhta, A., 2001, In: Proceedings of the 16th International Conference on Production Research, Prague, 29. July - 3. August, 2001. p. 7 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  38. Published

    Adaptive gripper system for small optical assemblies

    Heikkilä, R., Prusi, T., Ha, T. H., Song, J. Y., Lee, C. W. & Tuokko, R., 2010, Proceedings of the 7th International Workshop on Microfactories, IWMF 2010, 24-27 October, 2010, Daejeon, Korea. p. 308-312

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  39. Published

    Additive Manufacturing in Production: A Study Case Applying Technical Requirements: 15th Nordic Laser Materials Processing Conference, Nolamp 15

    Ituarte, I. F., Coatanea, E., Salmi, M., Tuomi, J. & Partanen, J., 2015, In : Physics Procedia. 78, p. 357-366 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  40. Published

    Addressing the myopia problem: a web service-based implementation architecture for a Petri Net-based scheduler

    Popescu, C. & Martinez Lastra, J. L., 2010, 2010 IEEE International Conference on Industrial Technology (ICIT), 14-17 March, 2010, Vina del Mar, Chile. p. 1643-1647

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  41. Published

    A Degree Program in Engineering Design Education: An Industrial Case

    Siekkinen, R., Oja, H. & Riitahuhta, A., 2002, Proceedings of the NordDesign 2002, August 14-16, 2002, NTNU, Trondheim, Norway. Boelskifte, P. & Sigurjonsson, J. B. (eds.). Trondheim, p. 291-298

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  42. Published

    A Design Support System with Topological Constraints

    Paasiala, P., 1996, Koneensuunnittelun XXI kansallisen symposiumin esitelmät, Tampereen teknillinen korkeakoulu, Koneensuunnittelu, Raportti 61. Kortesuo, A. & Siekkinen, V. (eds.). Tampere, p. 19-32

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  43. Published

    A device configuration management tool for context-aware system

    Kuutti, A., Dvoryanchikova, A., Lobov, A., Martinez Lastra, J. L. & Vahtera, T., 2012, Proceedings of IEEE 10th International Conference on Industrial Informatics, INDIN 2012, 25-27 July, 2012, Beijing, China. Piscataway: Institute of Electrical and Electronics Engineers IEEE, p. 10-15 (IEEE International Conference on Industrial Informatics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  44. Published

    A distributed balancing method for elastic rolls

    Jokinen, K. & Keskinen, E., 2010, Proceedings ot The Post-Graduate Workshop on Intelligent Machines and Transport Systems, May 3-7, 2010, Cern, Switzerland. Karvinen, T. & Keskinen, E. (eds.). p. 52-65

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  45. Published

    Advanced concepts for flexible data integration in heterogeneous production environments

    Dennert, A., Garcia Izaguirre Montemayor, J., Krause, J., Hesse, S., Martinez Lastra, J. L. & Wollschlaeger, M., 2013, 11th IFAC Workshop on intelligent manufacturing systems, The international federation of automatic control, May 22-24, 2013. São Paulo, Brazil. Tsuzuki, M. D. S. G. & José, R. (eds.). International Federation of Automatic Control IFAC, p. 348-353 6 p. (Elsevier IFAC Publications / IFAC Proceedings series; vol. 11).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  46. Published

    Advances in the TUT microfactory concept development

    Heikkilä, R., Järvenpää, E. & Tuokko, R., 2010, In : International Journal of Automation Technology. 4, 2, p. 117-126

    Research output: Contribution to journalArticleScientificpeer-review

  47. Published

    A dynamically stable nip loading mechanisms for paper finishing systems

    Kivinen, J-M., Keskinen, E. K., Järvenpää, V-M., Cotsaftis, M. & Vikman, K., 1999, Proceedings of the tenth world congress on the theory of machines and mechanisms, IFToMM, Oulu, Finland, 20-24 June, 1999. Oulu, p. 1353-1360

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  48. Published

    A Dynamic Approach on Integrated Product and Service Management - A Methodology and Implementation Scenario

    Salminen, V., Pillai, B. & Riitahuhta, A. O., 2002, International Conference on Engineering Design and Automation, EDA Maui, August 4-7, 2002. p. 8 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  49. Published

    AE, The acoustic emission of grase lubricated rolling bearings

    Miettinen, J., 2001, In : Maintenance & Asset Management. 16, 2, p. 7-11

    Research output: Contribution to journalArticleScientificpeer-review

  50. Published

    A flexible laser micro-machining platform

    Vihinen, J., Latokartano, J. & Kumpulainen, T., 2012, Proceedings of The 8th International Workshop on Microfactories, IWMF 2012, 18-20 June, 2012, Tampere Hall, Tampere, Finland. Reijo, T., Minna, L. & Pasi, L. (eds.). Tampere: Tampere University of Technology, p. 1-6 6 p. (International Workshop on MicroFactories).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Previous 1 2 3 4 5 6 7 8 ...29 Next

ID: 22256