Tampere University of Technology

TUTCRIS Research Portal

Department of Mechanical Engineering and Industrial Systems

Research unit: Department

  1. A1 Journal article-refereed
  2. Published

    Conjugated heat transfer from a uniformly heated plate and a plate fin with uniform base heat flux

    Lindstedt, M. & Karvinen, R., Apr 2017, In : International Journal of Heat and Mass Transfer. 107, p. 89-95 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  3. Published

    Continuum approach for modeling fatigue in amorphous glassy polymers. Applications to the investigation of damage-ratcheting interaction in polycarbonate

    Holopainen, S., Barriere, T., Cheng, G. & Kouhia, R., Apr 2017, In : International Journal of Plasticity. 91, p. 109-133 24 p.

    Research output: Contribution to journalArticleScientificpeer-review

  4. Published

    Effect of Laser Power on Yield of TiO2 Nanoparticles Synthesized by Pulsed Laser Ablation in Water

    Singh, A., Vihinen, J., Frankberg, E., Hyvärinen, L., Honkanen, M. & Levänen, E., Mar 2017, In : Journal of Ceramic Science and Technology. 8, 1, p. 39-43 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  5. Published

    Numerical 3D modelling of the effects of strain rate and confining pressure on the compressive behavior of Kuru granite

    Saksala, T., Hokka, M. & Kuokkala, V-T., 2017, In : Computers and Geotechnics. 88, p. 1-8 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  6. Published

    A new paradigm for fatigue analysis - evolution equation based continuum approach

    Jussila, J., Holopainen, S., Kaarakka, T., Kouhia, R., Mäkinen, J., Orelma, H., Ottosen, N. S., Matti, R. & Saksala, T., 2017, In : Rakenteiden mekaniikka. 50, 3, p. 333-336 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  7. Published

    Effect of humidity on triboelectric charging in a vertically vibrated granular bed: Experiments and modeling

    Kolehmainen, J., Sippola, P., Raitanen, O., Ozel, A., Boyce, C. M., Saarenrinne, P. & Sundaresan, S., 2017, In : Chemical Engineering Science. 173, p. 363-373 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  8. Published

    An investigation of fatigue damage development under complete contact fretting test conditions

    Holopainen, S., Juoksukangas, J., Kouhia, R., Lehtovaara, A. & Saksala, T., 30 Dec 2016, In : Rakenteiden mekaniikka. 49, 3, p. 151-159 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  9. Published

    Muodonmuutoksen mitat kontinuumimekaniikassa

    Hartikainen, J., Kouhia, R., Mikkola, M. & Mäkinen, J., 9 Dec 2016, In : Rakenteiden mekaniikka. 49, 2, p. 86-99 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  10. Published

    On optimisation of structures under stability constraints - a simple example

    Kouhia, R., Pajunen, S. & Poutala, J., 9 Dec 2016, In : Rakenteiden mekaniikka. 49, 2, p. 69-77 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  11. Published

    Optimal control of pump rotational speed in filling and emptying a reservoir: minimum energy consumption with fixed time

    Lindstedt, M. & Karvinen, R., Dec 2016, In : Energy Efficiency. 9, 6, p. 1461–1474 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  12. Published

    Unsteady laminar boundary layers of rainbow trout swimming in turbulent flows

    Yanase, K. & Saarenrinne, P., 8 Nov 2016, In : Biology Open. 33 p.

    Research output: Contribution to journalArticleScientificpeer-review

  13. Published

    Continuum approach for modelling transversely isotropic high-cycle fatigue

    Holopainen, S., Kouhia, R. & Saksala, T., 1 Nov 2016, In : EUROPEAN JOURNAL OF MECHANICS A: SOLIDS. 60, p. 183-195

    Research output: Contribution to journalArticleScientificpeer-review

  14. Published
  15. Published

    Stress relaxation in tempered glass caused by heat soak testing

    Schneider, J., Hilcken, J., Aronen, A., Karvinen, R., Olesen, J. F. & Nielsen, J., 1 Sep 2016, In : Engineering Structures. 122, p. 42-49 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  16. Published

    Multi-objective optimization of electronics heat sinks cooled by natural convection

    Lampio, K. & Karvinen, R., Sep 2016, In : Journal of Physics: Conference Series. 745, 3, 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  17. Published

    A conceptual modeling and simulation framework for system Design

    Coatanea, E., Roca, R., Mokhtarian, H., Mokammel, F. & Ikkala, K., 1 Jul 2016, In : Computing in Science and Engineering. 18, 4, p. 42-52

    Research output: Contribution to journalArticleScientificpeer-review

  18. Published

    Big data tulee - mitä se tarkoittaa

    Holopainen, S., 15 Jun 2016, In : Futura. 2, p. 5 - 18 14 p., 2.

    Research output: Contribution to journalArticleScientificpeer-review

  19. Published

    Modeling of Hysteresis Losses in Ferromagnetic Laminations under Mechanical Stress

    Rasilo, P., Singh, D., Aydin, U., Martin, F., Kouhia, R., Belahcen, A. & Arkkio, A., Mar 2016, In : IEEE Transactions on Magnetics. 52, 3, 4 p., 7300204.

    Research output: Contribution to journalArticleScientificpeer-review

  20. Published

    High strain rate radial compression of Norway spruce earlywood and latewood

    Moilanen, C. S., Björkqvist, T., Engberg, B. A., Salminen, L. I. & Saarenrinne, P., 1 Feb 2016, In : Cellulose. 23, 1, p. 873-889 17 p.

    Research output: Contribution to journalArticleScientificpeer-review

  21. Published

    Importance of maintenance data quality in extended warranty simulation

    Mahlamäki, K., Niemi, A., Jokinen, J. & Borgman, J., 1 Jan 2016, In : International Journal of COMADEM. 19, 1, p. 3-10 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  22. Published

    Challenges of Knowledge and Information Management during New Product Introduction: Experiences from a Finnish Multinational Company

    Järvenpää, E., Kopra, M-J. & Lanz, M., 2016, In : Interdisciplinary Journal of Information, Knowledge, and Management. 11, p. 285 308 p.

    Research output: Contribution to journalArticleScientificpeer-review

  23. Published

    Management of distributed knowledge encapsulated in embedded devices

    Ramis Ferrer, B., Iarovyi, S., Gonzalez, L., Lobov, A. & Martinez Lastra, J. L., 2016, In : International Journal of Production Research. 54, 18, p. 1-18 18 p.

    Research output: Contribution to journalArticleScientificpeer-review

  24. Published

    Numerical modeling of dynamic rock fracture with a combined 3D continuum viscodamage-embedded discontinuity model

    Saksala, T., Brancherie, D. & Ibrahimbegovic, A., 2016, In : International Journal for Numerical and Analytical Methods in Geomechanics. 40, 9, p. 1339–1357 19 p.

    Research output: Contribution to journalArticleScientificpeer-review

  25. Published

    Numerical study of the influence of hydrostatic and confining pressure on percussive drilling of hard rock

    Saksala, T., 2016, In : Computers and Geotechnics. 76, p. 120-128 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  26. Published

    Comparative environmental impacts of additive and subtractive manufacturing technologies

    Paris, H., Mokhtarian, H., Coatanéa, E., Museau, M. & Ituarte, I. F., 2016, In : CIRP Annals: Manufacturing Technology. 65, 1, p. 29-32

    Research output: Contribution to journalArticleScientificpeer-review

  27. Published

    Modelling of Dynamic Rock Fracture Process with a Rate-Dependent Combined Continuum Damage-Embedded Discontinuity Model Incorporating Microstructure

    Saksala, T., 2016, In : Rock Mechanics and Rock Engineering. 49, p. 3947–3962 16 p.

    Research output: Contribution to journalArticleScientificpeer-review

  28. Published

    Exercise loading history and femoral neck strength in a sideways fall: A three-dimensional finite element modeling study.

    Abe, S., Narra, N., Nikander, R., Hyttinen, J., Kouhia, R. & Sievänen, H., 2016, In : Bone. 92, p. 9-17 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  29. Published

    Surrogate-model based method and software for practical design optimization problems

    Pajunen, S. & Laakkonen, P., 2016, In : Rakenteiden mekaniikka. 49, 3, p. 100-118 19 p.

    Research output: Contribution to journalArticleScientificpeer-review

  30. Published

    Numerical modelling of quasi-brittle fracture with the rate-dependent multiple embedded discontinuity approach

    Saksala, T., 2016, In : Rakenteiden mekaniikka. 49, 2, p. 25-35 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  31. Published

    Brownfield Process: A method for modular product family development aiming for product configuration

    Pakkanen, J., Juuti, T. & Lehtonen, T., 2016, In : DESIGN STUDIES. 45B, p. 210-241 32 p.

    Research output: Contribution to journalArticleScientificpeer-review

  32. Published

    Validity of parameters in static linear testing of flexor tendon repair

    Linnanmäki, L., Göransson, H., Havulinna, J., Sippola, P., Karjalainen, T. & Leppänen, O. V., 2016, In : Journal of Biomechanics. 49, 13, p. 2785–2790

    Research output: Contribution to journalArticleScientificpeer-review

  33. Published

    The cross-sectional area of the gluteus maximus muscle varies according to habitual exercise loading: Implications for activity-related and evolutionary studies

    Niinimäki, S., Härkönen, L., Nikander, R., Abe, S., Knüsel, C. & Sievänen, H., 2016, In : HOMO: Journal of Comparative Human Biology. 67, 2, p. 125-137

    Research output: Contribution to journalArticleScientificpeer-review

  34. Published

    Application of a Capability-based Adaptation Methodology to a Small-size Production System

    Järvenpää, E., Lanz, M. & Tuokko, R., 2016, In : International Journal of Manufacturing Technology and Management. 30, 1/2, p. 67-86 20 p.

    Research output: Contribution to journalArticleScientificpeer-review

  35. Published

    Production of sulfonated polyetheretherketone/polypropylene fibers for photoactive textiles

    Mylläri, V., Fatarella, E., Ruzzante, M., Pogni, R., Baratto, M. C., Skrifvars, M., Syrjälä, S. & Järvelä, P., 1 Oct 2015, In : Journal of Applied Polymer Science. 132, 39, 42595.

    Research output: Contribution to journalArticleScientificpeer-review

  36. Published

    Context-aware knowledge-based middleware for selective information delivery in data-intensive monitoring systems

    Evchina, Y., Puttonen, J., Dvoryanchikova, A. & Martinez Lastra, J. L., Aug 2015, In : Engineering Applications of Artificial Intelligence. 43, p. 111-126 16 p.

    Research output: Contribution to journalArticleScientificpeer-review

  37. Published

    High temperature erosion wear of cermet particles reinforced self-fluxing alloy HVOF sprayed coatings

    Surzhenkov, A., Goljandin, D., Traksmaa, R., Viljus, M., Talviste, K., Aruniit, A., Latokartano, J. & Kulu, P., 27 Jul 2015, In : Materials Science: Medziagotyra. 21, 3, p. 386-390 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  38. Published

    A comparison of rheology and FTIR in the study of polypropylene and polystyrene photodegradation

    Mylläri, V., Ruoko, T-P. & Syrjälä, S., 1 Jul 2015, In : Journal of Applied Polymer Science. 132, 28, 6 p., 42246.

    Research output: Contribution to journalArticleScientificpeer-review

  39. Published

    Systematic search for design contradictions in systems' architecture: Toward a computer aided analysis

    Coatanéa, E., Nonsiri, S., Roca, R., Mokammel, F., Kruck, J. & Christophe, F., 6 Jun 2015, In : Journal of Integrated Design and Process Science. 19, 1, p. 25-46 22 p.

    Research output: Contribution to journalArticleScientificpeer-review

  40. Published

    Optimal Shapes of Straight Fins and Finned Heat Sinks

    Lindstedt, M., Lampio, K. & Karvinen, R., Jun 2015, In : Journal of Heat Transfer: Transactions of the ASME. 137, 6, 8 p., 061006.

    Research output: Contribution to journalArticleScientificpeer-review

  41. Published

    Shop floor-level control of manufacturing companies: an interview study in Finland

    Tokola, H., Järvenpää, E., Salonen, T., Lanz, M., Koho, M. & Niemi, E., Mar 2015, In : Management and Production Engineering Review. 6, 1, p. 51-58 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  42. Published

    High speed, high strength microwelding of Si/glass using ps-laser pulses

    Miyamoto, I., Okamoto, Y., Hansen, A., Vihinen, J., Amberla, T. & Kangastupa, J., 9 Feb 2015, In : Optics Express. 23, 3, p. 3427-3439 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  43. Published

    Towards a concept for realizing sustainability in the manufacturing industry

    Koho, M., Tapaninaho, M., Heilala, J. & Torvinen, S., 2 Jan 2015, In : Journal of Industrial and Production Engineering. 32, 1, p. 12-22 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  44. Published

    Human parechovirus as a minor cause of acute otitis media in children

    Sillanpää, S., Oikarinen, S., Sipilä, M., Seppälä, E., Nurminen, N., Rautiainen, M., Laranne, J. & Hyöty, H., 1 Jan 2015, In : JOURNAL OF CLINICAL VIROLOGY. 62, p. 106-109 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  45. Published

    Image-Based Stress and Strain Measurement of Wood in the Split-Hopkinson Pressure Bar

    Moilanen, C. S., Saarenrinne, P., Engberg, B. A. & Björkqvist, T., 2015, In : Measurement Science and Technology. 26, 8, 085206.

    Research output: Contribution to journalArticleScientificpeer-review

  46. Published

    Planning-based semantic web service composition in factory automation

    Puttonen, J., Lobov, A., Cavia Soto, M. A. & Martinez Lastra, J. L., 2015, In : Advanced Engineering Informatics. 29, 4, p. 1041-1054

    Research output: Contribution to journalArticleScientificpeer-review

  47. Published

    Systematic Search and Ranking of Physical Contradictions Using Graph Theory Principles: Toward a Systematic Analysis of Design Strategies and their Impacts: TRIZ and Knowledge-Based Innovation in Science and Industry

    Coatanéa, E., Ryynänen, L., Calonius, O., Mokammel, F. & Riitahuhta, A., 2015, In : Procedia Engineering. 131, p. 1165-1182 18 p.

    Research output: Contribution to journalArticleScientificpeer-review

  48. Published

    Some aspects on efficient solution of creep problems

    Kouhia, R., Marjamäki, P. & Kivilahti, J., 2015, In : Rakenteiden mekaniikka. 48, 4, p. 199-210 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  49. Published

    Additive Manufacturing in Production: A Study Case Applying Technical Requirements: 15th Nordic Laser Materials Processing Conference, Nolamp 15

    Ituarte, I. F., Coatanea, E., Salmi, M., Tuomi, J. & Partanen, J., 2015, In : Physics Procedia. 78, p. 357-366 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  50. Published

    Experimental and numerical study of a choke valve in a turbulent flow

    Huovinen, M., Kolehmainen, J., Koponen, P., Nissilä, T. & Saarenrinne, P., 2015, In : Flow Measurement and Instrumentation. 45, p. 151-161 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  51. Published

    Damage-viscoplastic model based on the Hoek-Brown criterion for numerical modeling of rock fracture

    Saksala, T., 2015, In : Rakenteiden mekaniikka. 48, 2, p. 99-114 16 p.

    Research output: Contribution to journalArticleScientificpeer-review

Previous 1 2 3 4 5 6 7 8 ...29 Next

ID: 22256