Tampere University of Technology

TUTCRIS Research Portal

Department of Mechanical Engineering and Industrial Systems

Research unit: Department

  1. 2015
  2. Published

    Micro-factories

    Järvenpää, E., Heikkilä, R., Siltala, N., Prusi, T. & Tuokko, R., 2015, Micromanufacturing Engineering and Technology. 2 ed. Elsevier, p. 549-579

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  3. Published

    Numerical modelling of rock fracture with the embedded discontinuity approach incorporating heterogeneity

    Saksala, T., 2015, ISRM Congress 2015 Proceedings: Innovations in Applied and Theoretical Rock Mechanics. International Society for Rock Mechanics ISRM, 11 p. 177

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  4. Published

    On the effect of damping on stability of non-conservative systems

    Jeronen, J. & Kouhia, R., 2015, Proceedings of the XII Finnish Mechanics Days: Suomen XII mekaniikkapäivien esitelmät. Kouhia, R., Mäkinen, J., Pajunen, S. & Saksala, T. (eds.). Rakenteiden Mekaniikan Seura ry, p. 77 82 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  5. Published

    Parameters affecting the energy performance of the transport sector in smart cities

    Mantilla R., M. F., Nieto Lee, A. & Lastra, J. L. M., 2015, SMARTGREENS 2015 - 4th International Conference on Smart Cities and Green ICT Systems, Proceedings. SCITEPRESS, p. 83-88 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  6. Published

    Planning-based semantic web service composition in factory automation

    Puttonen, J., Lobov, A., Cavia Soto, M. A. & Martinez Lastra, J. L., 2015, In : Advanced Engineering Informatics. 29, 4, p. 1041-1054

    Research output: Contribution to journalArticleScientificpeer-review

  7. Published

    Potentials of web standards for automation control in manufacturing systems

    Borja Ramis, F., Iarovyi, S., Lobov, A. & Martinez Lastra, J. L., 2015, 2015 IEEE European Modelling Symposium. p. 359-366 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  8. Published

    Production planning and control in Finnish manufacturing companies – Current state and challenges

    Järvenpää, E., Lanz, M., Tokola, H., Salonen, T. & Koho, M., 2015, Proceedings of the 25th International Conference on Flexible Automation and Intelligent Manufacturing. 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  9. Published

    Rate dependent embedded discontinuity approach incorporating heterogeneity for numerical modelling of rock fracture

    Saksala, T., 2015, In : Rock Mechanics and Rock Engineering. 48, 4, p. 1605-1622 18 p.

    Research output: Contribution to journalArticleScientificpeer-review

  10. Published

    Security in Cloud-Based Cyber-Physical Systems

    Puttonen, J., Afolaranmi, S. O., Gonzalez Moctezuma, L., Lobov, A. & Martinez Lastra, J. L., 2015, 2015 10th International Conference on P2P, Parallel, Grid, Cloud and Internet Computing (3PGCIC). IEEE, p. 671 - 676

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  11. Published

    Semantic-Driven CEP for Delivery of Information Streams in Data-Intensive Monitoring Systems

    Evchina, Y. & Martinez Lastra, J. L., 2015, 2015 IEEE 13th International Conference on Industrial Informatics (INDIN). p. 1251-1256

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  12. Published

    Simulointi nopeuttaa käyttöiän määritystä

    Ojala, P., Saarenrinne, P., Miettinen, J., Multanen, P., Kiilunen, J., Hietala, J-P., Kolu, A., Pippola, J., Mostofizadeh, M. & Ylönen, M., 2015, In : Promaint. 2, p. 24-27 4 p.

    Research output: Contribution to journalArticleProfessional

  13. Published

    Some aspects on efficient solution of creep problems

    Kouhia, R., Marjamäki, P. & Kivilahti, J., 2015, In : Rakenteiden mekaniikka. 48, 4, p. 199-210 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  14. Published

    Sustainability Performance Measurement and Management Model

    Koho, M., Tapaninaho, M., Järvenpää, E., Heilala, J. & Lanz, M., 2015, . Proceedings of the 25th International Conference on Flexible Automation and Intelligent Manufacturing. 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  15. Published

    Systematic Search and Ranking of Physical Contradictions Using Graph Theory Principles: Toward a Systematic Analysis of Design Strategies and their Impacts: TRIZ and Knowledge-Based Innovation in Science and Industry

    Coatanéa, E., Ryynänen, L., Calonius, O., Mokammel, F. & Riitahuhta, A., 2015, In : Procedia Engineering. 131, p. 1165-1182 18 p.

    Research output: Contribution to journalArticleScientificpeer-review

  16. Published

    Teollinen internet täydentää pk-yritysten palveluita

    Väliaho, V., Martinsuo, M., Koskinen, K. & Aaltonen, J., 2015, In : Promaint. 29, 5, p. 36-38 3 p.

    Research output: Contribution to journalArticleProfessional

  17. Published

    Two models for hydraulic cylinder

    Ylinen, A., Kouhia, R. & Mäkinen, J., 2015, 2nd International Conference on Multi-Scale Computational Methods for Solids and Fluids: ECCOMAS MSF 2015. Ibrahimbegović, A., Ademović, N., Ilić-Georgijević, E., Serdarević, A., Hrasnica, M. & Dolarević, S. (eds.). Sarajevo, p. 115-116 2 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  18. Published

    Unsteady turbulent boundary layers in swimming rainbow trout

    Yanase, K. & Saarenrinne, P., 2015, In : Journal of Experimental Biology. 218, 9, p. 1373-1385

    Research output: Contribution to journalArticleScientificpeer-review

  19. Published

    Using maintenance data for extended warranty simulation

    Mahlamäki, K., Jokinen, J., Borgman, J., Niemi, A. & Rämänen, J., 2015, COMADEM 2014, Implications of life cycle analysis in asset and maintenance management, 16-18 September 2014, Brisbane Convention and Exhibition Centre, Australia. 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  20. Published

    Wood compression model for radial compression of earlywood and latewood

    Moilanen, C., Björkqvist, T. & Saarenrinne, P., 2015, Proceedings of the XII Finnish Mechanics Days. Rakenteiden Mekaniikan Seura ry, p. 261-266 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  21. 2014
  22. Published

    Method and apparatus for cooling material by atomised spray

    Ahonen, S., Karvinen, R. & Vainio, T., 31 Dec 2014, IPC No. C03B 27/ 02 A I, Patent No. CN102803520, Priority date 15 Jun 2010, Priority No. WO2010FI50499

    Research output: PatentScientific

  23. Published

    Competence needs and a model for the teaching strategy development of mechanical designers in product development

    Nevaranta, J., 31 Oct 2014, Tampere: Tampere University of Technology. 141 p. (Tampere University of Technology, Publication; vol. 1245)

    Research output: Book/ReportDoctoral thesisMonograph

  24. Published

    A Semantically Enhanced Approach for Orchestration of Web Services in Factory Automation Systems

    Puttonen, J., 15 Aug 2014, Tampere: Tampere University of Technology. 157 p. (Tampere University of Technology. Publication; no. 1224)

    Research output: Book/ReportDoctoral thesisMonograph

  25. Published

    Modeling and control of a pneumatic muscle actuator

    Jouppila, V., 4 Apr 2014, Tampere: Tampere University of Technology. 95 p. (Tampere University of Technology. Publication; vol. 1199)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  26. Published

    Rewiring the wax ester production pathway of acinetobacter baylyi ADP1

    Santala, S., Efimova, E., Koskinen, P., Karp, M. T. & Santala, V., 21 Mar 2014, In : ACS Synthetic Biology. 3, 3, p. 145-151 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  27. Published

    A case study of share of ICT infrastructure in energy consumption of discrete manufacturing facility

    Sohail, M., Florea, A. & Martinez Lastra, J. L., 2014, 2014 IEEE 15th Workshop on Control and Modeling for Power Electronics (COMPEL), 22-25 Junen 2014, University of Cantabria, Santander, Spain. Piscataway: The Institute of Electrical and Electronics Engineers IEEE, p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  28. Published

    A Continuum damage model based on Ottosen's four parameter failure criterion for concrete

    Tahaei Yaghoubi, S., Kouhia, R., Hartikainen, J. & Kolari, K., 2014, In : Rakenteiden mekaniikka. 47, 2, p. 50-66 17 p.

    Research output: Contribution to journalArticleScientificpeer-review

  29. Published

    A Continuum damage model for quasi-brittle materials

    Yaghoubi, S. T., Kouhia, R., Hartikainen, J. & Kolari, K., 2014, Proceedings of NSCM-27: the 27th Mechanics Nordic Seminar on Computational Mechanics. Eriksson, A., Kulachenko, A., Mihaescu, M. & Tibert, G. (eds.). Stockholm: KTH Mechanics, p. 160-163 4 p. (TRITA-MEK Technical report; no. 24).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  30. Published

    Activity report of COST Action TU0905 Working Group 2 – Material characterization and material improvement

    Schneider, J., Karvinen, R., Vandebroek, M. & Savineau, G., 2014, Proceedings volume of the Challenging Glass 4 & COST Action TU0905 Final Conference, 6-7 February 2014 at the EPFL in Lausanne, Switzerland. Louter, C., Bos, F., Belis, J. & Lebet, J-P. (eds.). CRC Press, p. 21-24 4 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  31. Published

    A hydraulic cylinder model for multibody simulations

    Ylinen, A., Marjamäki, H. & Mäkinen, J., 2014, In : Computers & Structures. 138, p. 62-72 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  32. Published

    A model for scheduling of employees using supplier selection

    Holopainen, S., 2014, Engineering optimization IV, Proceedings of the International Conference on Engineering Optimiztion (ENGOPT 2014), Lisbon, Portugal, 8-11 September 2014. Rodrigues, H. C., Herskovits, J., Mota Soares, C. M., Guedes, J. M., Araújo, A. L., Folgado, J. O., Moleiro, F. & Madeira, J. F. A. (eds.). The Netherlands: CRC Press/Balkema, p. 533-538 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  33. Published

    Anisotropic viscodamage-viscoplastic consistency constitutive model with a parabolic cap for rocks with brittle and ductile behavior

    Saksala, T. & Ibrahimbegovic, A., 2014, In : International Journal of Rock Mechanics and Mining Sciences. 70, p. 460-473 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  34. Published

    A packet scheduler for real-time 6LoWPAN wireless networks in manufacturing systems

    Santillan Martinez, G., Delamer, I. M. & Martinez Lastra, J. L., 2014, In : Journal of Intelligent Manufacturing. 10845, 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  35. Published

    Application of Design Review to Probabilistic Risk Assessment in a Large Investment Project

    Virtanen, S., Penttinen, J-P., Kiiski, M. & Jokinen, J., 2014, Proceedings of the Probabilistic Safety Assessment and Management PSAM12, June 2014, Honolulu, Hawaii. p. 1-12 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  36. Published

    A Semi-Fidelity Training Simulator: Promising Opportunities for Student-Centered Learning

    Kaapu, T., Tiainen, T. & Ellman, A., 2014, Proceedings of the 22nd European Conference on Information Systems, ECIS 2014, June 9-11, 2014,Tel Aviv. 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  37. Published

    CFD based on-line process analysis - applied to circulating and bubbling fluidized bed processes

    Kallio, S., Saarenrinne, P., Peltola, J., Tähtinen, M., Saxén, H., Kärkkäinen, T., Niemi, T., Karvonen, L., Nevalainen, H., Elfvengren, J., Kolehmainen, J., Hermanson, A., Mondal, D. & Maslov, A., 2014, Espoo: VTT. 43 p. (Research report VTT-R; no. 04576-14)

    Research output: Book/ReportCommissioned reportProfessional

  38. Published

    Champion-työkalut: Fasilitoijan ohjeet. Mestariluokan työkalut hankkeiden valmisteluun ja toteuttamiseen

    Juuti, T., Kopra, M-J., Halonen, N. & Tapaninaho, M., 2014, Tampere: Tampereen teknillinen yliopisto. Kone- ja tuotantotekniikan laitos. 80 p.

    Research output: Book/ReportBookProfessional

  39. Published

    CO-Based Outdoor Smart Lighting for Energy Aware Factory

    Florea, A., Farahat, A., Postelnicu, C., Martinez Lastra, J. L. & Azcondo Sánchez, F. J., 2014, Internet of Things Based on Smart Objects. Fortino, G. & Trunfio, P. (eds.). Springer International Publishing, p. 69-83 15 p. (Internet of Things).

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  40. Published

    Concerns over students role as test users in virtual environments

    Tiainen, T. & Ellman, A., 2014, Proceedings of the 18th Academic MindTrek Conference 2014 "Media business, management, content & services" 4-6 November, 2014, Tampere, Finland. Lugmayr, A., Franssila, H. & Paavilainen, J. (eds.). New York, NY: The Association for Computing Machinery, p. 11-18 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  41. Published

    Delay excited vibrations in grinding wheel rotor system

    Järvenpää, V-M. & Yuan, L., 2014, Proceedings of the 21st International Congress on Sound and Vibration, In Depth Sound and Vibration Research 2014, ICSV21, 13-17 July, 2014, Beijing, China. Crocker, M. J., Pawelczyk, M. & Tian, J. (eds.). International Institute of Acoustics and Vibration (IIAV), p. 2437-2444 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  42. Published

    Design reasoning patterns in NPD education design

    Juuti, T., Lehtonen, T., Rättyä, K., Halonen, N., Vanhatalo, M. & Kujansuu, P., 2014, Proceedings of 16th International Conference on Engineering and Product Design Education, University of Twente, Enschede, The Netherlands 4th-5th September 2014. Bohemia, E., Eger, A., Eggink, W., Kovacevic, A., Parkinson, B. & Wits, W. (eds.). The Design Society, p. 682-687 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  43. Published

    Design synthesis: integrated product and manufacturing system design

    Britton, G. & Torvinen, S., 2014, CRC Press. 358 p.

    Research output: Book/ReportBookScientificpeer-review

  44. Published

    Easurement of solids velocity and concentration in a large cold CFB model

    Peltola, J., Karvonen, L., Elfvengren, J., Kolehmainen, J., Kallio, S., Pallares, D. & Johnsson, F., 2014, CFB-11: Proceedings of the 11th International Conference on Fluidized Bed Technology, Beijing, China, 14-17 May 2014. p. 589-594

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  45. Published

    Energy efficient outdoor lighting: an implementation

    Farahat, A., Florea, A., Martinez Lastra, J. L., Branas Reyes, C. & Azcondo, F. J., 2014, 2014 IEEE 15th Workshop on Control and Modeling for Power Electronics (COMPEL), 22-25 June 2014, University of Cantabria, Santander, Spain. Piscataway: The Institute of Electrical and Electronics Engineers, p. 1-5 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  46. Published

    Experimental Comparisons of Sliding Mode Controlled Pneumatic Muscle and Cylinder Actuators

    Jouppila, V., Gadsden, A. S. & Ellman, A., 2014, In : Journal of Dynamic Systems, Measurement and Control: Transactions of the ASME. 136, 4, 10 p., 044503.

    Research output: Contribution to journalArticleScientificpeer-review

  47. Published

    Fatigue behavior of laser clad round steel bars

    Tuominen, J., Näkki, J., Poutala, J., Miettinen, J., Peltola, T., Vuoristo, P., Rasehorn, I., Alam, M. M. & Kaplan, A. F. H., 2014, In : Journal of Laser Applications. p. 1-10 10 p., 012006.

    Research output: Contribution to journalArticleScientificpeer-review

  48. Published

    Functional failure modes cause-consequence logic suited for mobile robots used at scientific facilities

    Douzi, I. K., Virtanen, S., Bonnal, P. & Verma, A. K., 2014, In : Reliability Engineering and System Safety. 129, p. 10-18 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  49. Published

    Hermetic room temperature glass welding technology

    Lundén, H., Kumpulainen, T., Määttänen, A. & Vihinen, J., 2014, 2014 NSTI Nanotechnology Conference and Expo, NSTI-Nanotech 2014 June 15-18, 2014, Washington, DC, USA. Nano Science and Technology Institute, p. 13-16 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  50. Published

    High Performance Particle Tracking Velocimetry for Fluidized Beds

    Elfvengren, J., Kolehmainen, J. & Saarenrinne, P., 2014, VISAPP 2014, Proceedings of the 9th International Conference on Computer Vision Theory and Applications , Volume 3, Lisbon, Portugal, 5-8 January, 2014. Battiato, S. & Braz, J. (eds.). SCITEPRESS, p. 441-449 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  51. Published

    High-speed Sliding Friction of Laser-textured Silicon Nitride in Water against Rubber

    Ismailov, A., Kumpulainen, T., Vihinen, J. & Levänen, E., 2014, Proceedings of the Twenty Eighth International Conference on Surface Modification Technologies. p. 267-273 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  52. Published

    Hopf bifurcation of nonlinear contact force in grinding system

    Yuan, L., Järvenpää, V-M. & Virtanen, S., 2014, Proceedings of the 21st International Congress on Sound and Vibration, In Depth Sound and Vibration Research, 2014, ICSV21, 13-17 July, 2014, Beijing, China. Crocker, M. J., Pawelczyk, M. & Tian, J. (eds.). International Institute of Acoustics and Vibration (IIAV), p. 2445-2452 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Previous 1 2 3 4 5 6 7 8 ...29 Next

ID: 22256