Tampere University of Technology

TUTCRIS Research Portal

Department of Mechanical Engineering and Industrial Systems

Research unit: Department

  1. Published

    Finite element model for rotating paper machine roll

    Järvenpää, V-M. & Keskinen, E., 2000, Proceedings of IMAC-XVIII: A Conference on Structural Dynamics, February 7-10, 2000, San Antonio, Texas. USA, p. 536-542

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  2. Published

    Finite element modeling of single point frictionless rolling contact oscillation for paper machine nip unit analyses

    Järvenpää, V-M. & Keskinen, E. K., 2000, Proceedings of the 5th Engineering Systems Design and Analysis Conference, ESDA 2000, July 10-13, 2000, Montreux, Switzerland. Wolfe, G. K. & Arnas, O. (eds.). p. 433-438

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  3. Published

    Adaptation of manufacturing systems in dynamic environment based on capability description method

    Järvenpää, E., Luostarinen, P., Lanz, M. & Tuokko, R., 2012, Manufacturing systems. Faieza, A. A. (ed.). Rijeka, Croatia: InTech, p. 93-118

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  4. Published

    Microfactory concept for highly flexible volume assembly of watch mechanisms

    Järvenpää, E., Heikkilä, R. & Tuokko, R., 2010, Proceedings of the 7th International Workshop on Microfactories, IWMF 2010, 24-27 October, 2010, Daejeon, Korea. p. 9-14

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  5. Published

    Experimental analysis of non-linear roll contact

    Järvenpää, V-M., Järvinen, V., Salmenperä, P. & Yuan, L., 2007, Proceedings of the IMAC-XXV, A Conference & Exposition on Structural Dynamics, February 19-22, 2007, Orlando, Florida, USA. p. 7 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  6. Published

    Micro-factories

    Järvenpää, E., Heikkilä, R., Siltala, N., Prusi, T. & Tuokko, R., 2015, Micromanufacturing Engineering and Technology. 2 ed. Elsevier, p. 549-579

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  7. Published

    Production planning and control in Finnish manufacturing companies – Current state and challenges

    Järvenpää, E., Lanz, M., Tokola, H., Salonen, T. & Koho, M., 2015, Proceedings of the 25th International Conference on Flexible Automation and Intelligent Manufacturing. 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  8. Published

    Guidelines for Designing Human-friendly User Interfaces for Factory Floor Manufacturing Operators

    Järvenpää, E. & Lanz, M., 2015, Advances in Production Management Systems: Innovative Production Management Towards Sustainable Growth: IFIP WG 5.7 International Conference, APMS 2015, Tokyo, Japan, September 7-9, 2015, Proceedings, Part II. Springer International Publishing, p. 531-538 8 p. (IFIP Advances in Information and Communication Technology).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  9. Published

    Application of a Capability-based Adaptation Methodology to a Small-size Production System

    Järvenpää, E., Lanz, M. & Tuokko, R., 2016, In : International Journal of Manufacturing Technology and Management. 30, 1/2, p. 67-86 20 p.

    Research output: Contribution to journalArticleScientificpeer-review

  10. Published

    Formal Resource and Capability Descriptions Supporting Rapid Reconfiguration of Assembly Systems

    Järvenpää, E., Siltala, N. & Lanz, M., Aug 2016, Proceedings of the 12th Conference on Automation Science and Engineering, and International Symposium on Assembly and Manufacturing. IEEE, p. 120-125 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  11. Published

    Agility Challenges in Finnish Manufacturing Companies – Manufacturing Operations Management Viewpoint

    Järvenpää, E., Lanz, M. & Lammervo, E., Sep 2016, Advances in Production Management Systems: Initiatives for a Sustainable World - IFIP WG 5.7 International Conference, APMS 2016, Revised Selected Papers. Springer, p. 130-137 8 p. (IFIP Advances in Information and Communication Technology; vol. 488).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  12. Published

    LeanMES Concept – An Approach to Manage Order-Delivery Information in a Production Network

    Järvenpää, E., Toivonen, V., Lanz, M. & Nieminen, H., 2016, Proceedings of the 26th International conference on Flexible Automation and Intelligent Manufacturing (FAIM2016). p. 988-995 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  13. Published

    Challenges of Knowledge and Information Management during New Product Introduction: Experiences from a Finnish Multinational Company

    Järvenpää, E., Kopra, M-J. & Lanz, M., 2016, In : Interdisciplinary Journal of Information, Knowledge, and Management. 11, p. 285 308 p.

    Research output: Contribution to journalArticleScientificpeer-review

  14. Published

    Enhancing product modularisation with multiple views of decomposition and clustering

    Järventausta, S. & Pulkkinen, A., 2001, Design for Configuration. A Debate based on the 5th Workshop on Product Structuring. Riitahuhta, A. & Pulkkinen, A. (eds.). Springer Verlag, p. 153-168

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  15. Published

    Dynamics of acceleration sensors fixed to rotating frame

    Järvinen, V., 2004, Proceedings of the 11th World Congress in Mechanism and Machine Science, April 1-4, 2004, Tianjin, China. Huang, T. (ed.). p. 2129-2133

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  16. Published

    Feature selection of vibration signal for fault diagnosis

    Järvinen, V., Miettinen, J. & Leinonen, P., 2006, Proceedings of the 19th International Cogress on Condition, Monitoring and Diagnostic Engineering Management (DOMADEM), June 13-15, 2006, Luleå, Sweden. Kumar, U. (ed.). p. 767-776

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  17. Published

    Wireless sensing system for modal testing of rolling cylinders

    Järvinen, V., Miettinen, J., Keskinen, E., Cotsaftis, M. & Hirvonen, M., 2001, Proceedings of the SEM Annual Conference on Experimental and Applied Mechanics, June 4-6, 2001, Portland, Oregon. USA, p. 1-4 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  18. Published

    Tools for diagnostics and prognostics of disturbances and faults in air fans

    Järvinen, V. & Miettinen, J., 2006, Prognostics for industrial machinery availability, Final seminar, Espoo 12.12.2006, VTT Symposium. Helle, A. (ed.). p. 97-114

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  19. Published

    Diagnostics and prognostics of disturbances and faults in air fans

    Järvinen, V., Miettinen, J. & Salmenperä, P., 2007, Second World Congress on Engineering Asset Management EAM and Fourth International Conference on Condition Monitoring, 11-14 June, 2007, Harrogate, UK. p. 825-834

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  20. Published

    Rotating sensor response by means of traveling waves

    Järvinen, V., 2004, Proceedings of IX International Conference on the Theory of Machines and Mechanisms, 31.8.-2.9.2004, Liberec, Czech Republik. Mrazek, J. (ed.). p. 391-396

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  21. Published

    Signal processing for modal analysis of rotating rolls

    Järvinen, V. & Miettinen, J., 2002, Proceedings of IMAC-XX: A Conference on Structural Dynamics, February 4-7, 2002, Los Angeles, California. U.S.A., p. 499-503

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  22. Published

    Torsional vibrations during the start-up of electric motor

    Järvinen, V. & Miettinen, J., 2000, Proceedings of IMAC-XVIII: A Conference on Structural Dynamics, February 7-10, 2000, San Antonio, Texas. USA, p. 1888-1894

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  23. Published

    Correlation between fixed and rotating frame measurements

    Järvinen, V., 2004, Profit through innovation & proactive management, Proceedings of the 17th International Congress on Condition Monitoring and Diagnostic Engineering Management, COMADEM 2004. Rao, R. B. K. N. (ed.). p. 95-103 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  24. Published

    An investigation into the use of acoustic methods fo leak detection in black liquor recovery boilers

    Järvinen, V., Hildebrand, R., Carroll, M. C. & Miettinen, J., 2006, Conference on Dynamics, Instrumentation & Control (CDIC'06), Queretaro, Mexico, Agust 13-16, 2006. p. 14 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  25. Published

    Experimental study of influence of lubricants on friction in spur gear contacts

    Järviö, O. & Lehtovaara, A., 2002, In : Tribologia - Finnish Journal of Tribology. 21, 1, p. 20-27

    Research output: Contribution to journalArticleScientificpeer-review

  26. Published

    Experimental Study of Influence of Lubricants on Friction in Spur Gear Contacts

    Järviö, O. & Lehtovaara, A., 2002, In : Kunnossapito. 5, p. 42-46

    Research output: Contribution to journalArticleScientificpeer-review

  27. Published

    Stochastic analysis of rolling contact

    Javier, F. & Keskinen, E., 2003, Proceedings of The First Arctic-Mediterranean Post Graduate Workshop on Intelligent Machines and Transport Systems, September 15-19, 2003, Montpellier, France. Cotsaftis, M. & Hildebrand, R. (eds.). p. 3 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  28. Published

    On the effect of damping on stability of non-conservative systems

    Jeronen, J. & Kouhia, R., 2015, Proceedings of the XII Finnish Mechanics Days: Suomen XII mekaniikkapäivien esitelmät. Kouhia, R., Mäkinen, J., Pajunen, S. & Saksala, T. (eds.). Rakenteiden Mekaniikan Seura ry, p. 77 82 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  29. Published

    Multi-agent control of reconfigurable pallet transport systems

    Jokinen, J., 2010, Tampere: Tampere University of Technology. (Tampereen teknillinen yliopisto. Julkaisu; vol. 869)

    Research output: Book/ReportDoctoral thesisMonograph

  30. Published

    Continuous balancing of long elastic rotors - literatue review

    Jokinen, K. & Keskinen, E., 2008, Fourth Arctic-Mediterranean Post Graduate Workshop on Intelligent Machines and Transport Systems, June 23-27, 2008, Saariselkä, Finland. Karvinen, T. & Keskinen, E. (eds.). p. 13-17

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  31. Published

    Virtual plant design of industrial manufacturing system for earth plasters

    Jokinen, K., Keskinen, E., Meingast, R. & Juvonen, R., 2007, Proceedings of the 24th International Symposium on Automation & Robotics in Construction, September 19-21, 2007, Kochi, India. India, p. 539-543

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  32. Published

    Inverse Methods for Continuous Balancing of Flexible Rolls

    Jokinen, K., 2010, Tampere: Tampere University of Technology. 107 p. (Tampereen teknillinen yliopisto. Julkaisu; vol. 944)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  33. Published

    Support-condition analyses of rotating beams under distributed imbalance loading

    Jokinen, K., Keskinen, E., Jorkama, M. & Seemann, W., 2011, ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE2011, November 11-17, 2011, Denver, Colorado, USA. New York, NY: ASME, p. 325-334 (ASME International Mechanical Engineering Congress and Exposition IMECE2011).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  34. Published

    A distributed balancing method for elastic rolls

    Jokinen, K. & Keskinen, E., 2010, Proceedings ot The Post-Graduate Workshop on Intelligent Machines and Transport Systems, May 3-7, 2010, Cern, Switzerland. Karvinen, T. & Keskinen, E. (eds.). p. 52-65

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  35. Published

    Continuous Models of Elastic Roll on Various Supports

    Jokinen, K. & Keskinen, E., 2011, 13th World Congress in Mechanism and Machine Science, Guanajuato, Mexico, 19-25 June, 2011. Guanajuato: Universidad de Guanajuato, p. 1-9 9 p. IMD-123. (World Congress in Mechanism and Machine Science).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  36. Published

    Condition monitoring for predictive maintenance in the pulp & paper industry: two implementions

    Jokinen, J., Postelnicu, C., Zhang, B., Camp, R., Suhonen, M., Karhumäki, O. & Martinez Lastra, J. L., 2012, Proceedings of 2012 IEEE International Conference on Systems, Man, and Cybernetics, SMC 2012, 14-17 October, 2012, COEX, Seoul, Korea. Piscataway, NJ: Institute of Electrical and Electronics Engineers IEEE, p. 1633-1638 (IEEE International Conference on Systems, Man and Cybernetics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  37. Published

    Sedimentation stability and rheological properties of ionic liquid-based bidisperse magnetorheological fluids

    Jönkkäri, I., Isakov, M. & Syrjälä, S., 2014, In : Journal of Intelligent Material Systems and Structures. 26, 16, p. 2256-2265 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  38. Published

    Improving the quality of filament winding process with novel techniques

    Jouppila, V., Nurminen, N., Berg, T. & Ellman, A., 2008, 7th International Conference on Smart Systems, Smart Systems 2008, June 4-5, 2008, Seinäjoki, Finland. p. 11 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  39. Published

    Sliding mode controller and filter applied to a pneumatic McKibben muscle actuator

    Jouppila, V., Gadsden, S. A., Habibi, S. R., Bone, G. M. & Ellman, A., 2009, Proceedings of IMECE2009, 2009 ASME International Mechanical Engineering Congress and Explosition IMECE 2009, November 13-19, 2009, Lake Buena Vista, Florida, USA. p. 9 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  40. Published

    Design of a portable motion platform using pneumatic muscle actuators

    Jouppila, V., Itäsalo, A-V., Kuosa, J. & Ellman, A., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Sairala, H. & Koskinen, K. T. (eds.). Tampere: Scandinavian International Conference on Fluid Power, p. 1-15 15 p. (Scandinavian International Conference on Fluid Power SICFP).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  41. Published

    A multiplexed force control of pneumatic muscles

    Jouppila, V. & Ellman, A., 2006, Proceedings of IMECE 2006. 2006 ASEM International Mechanical Engineering Congress and Exposition, November 5-10, 2006, Chicago, Illinois, USA. p. 8 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  42. Published

    Sliding mode control of a pneumatic muscle actuator system with a PWM strategy

    Jouppila, V. T., Gadsden, A. S., Bone, G. M., Ellman, A. U. & Habibi, S. R., 2014, In : International Journal of Fluid Power. 15, 1, p. 19-31 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  43. Published

    A Pneumatic Position Servo Based on On/Off Valve Actuated Muscle Actuators in Opposing Pair Configuration

    Jouppila, V. & Ellman, A., 2012, Fluid Power and Motion Control, FPMC 2012, 12-14 September 2012, Bath, UK. D.N., J. & A.R., P. (eds.). Bath, United Kingdom: Centre for Power Transmission and Motion Control, p. 243-258 (Fluid Power and Motion Control).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  44. Published

    Effect of load disturbances on multiplexed force control of McKibben actuators

    Jouppila, V. & Ellman, A., 2007, Proceedings of the 2007 ASME International Mechanical Engineering Congress & Exposition IMECE 2007, November 11-15, Seattle, Washington, USA. p. 13 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  45. Published

    Model-based development in the domain of mobile machines

    Jouppila, V., Kaapu, T., Sjöstedt, C-J., Ellman, A. & Chen, D-J., 2014, Digital proceedings of the tenth International Symposium on Tools and Methods of Competitive Engineering - TMCE 2014, May 19-23, Budapest, Hungary. Horvath, I. & Rusak, Z. (eds.). Delft: Delft University of Technology, p. 759-772 14 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  46. Published

    Position control fo PWM-actuated pneumatic musckle actuator system

    Jouppila, V. & Ellman, A., 2011, ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE2011, November 11-17, 2011, Denver, Colorado, USA. New York, NY: ASME, (ASME International Mechanical Engineering Congress and Exposition IMECE2011).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  47. Published

    Modeling and control of a pneumatic muscle actuator

    Jouppila, V., 4 Apr 2014, Tampere: Tampere University of Technology. 95 p. (Tampere University of Technology. Publication; vol. 1199)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  48. Published

    A review of pneumatic McKibben muscle actuators

    Jouppila, V. & Ellman, A., 2008, Fourth Arctic-Mediterranean Post Graduate Workshop on Intelligent Machines and Transport Systems, June 23-27, 2008, Saariselkä, Finland. Karvinen, T. & Keskinen, E. (eds.). p. 18-28

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  49. Published

    Experimental Comparisons of Sliding Mode Controlled Pneumatic Muscle and Cylinder Actuators

    Jouppila, V., Gadsden, A. S. & Ellman, A., 2014, In : Journal of Dynamic Systems, Measurement and Control: Transactions of the ASME. 136, 4, 10 p., 044503.

    Research output: Contribution to journalArticleScientificpeer-review

  50. Published

    Independent force control of pneumatic McKibben actuators using the multiplexing technique

    Jouppila, V. & Ellman, A., 2007, Power Transmission and Motion Control (PTMC 2007), University of Bath, UK, 12-14 September 2007. Johnston, D. N. & Plummer, A. R. (eds.). p. 331-347

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

Previous 1...3 4 5 6 7 8 9 10 ...29 Next

ID: 22256