Tampere University of Technology

TUTCRIS Research Portal

Department of Mechanical Engineering and Industrial Systems

Research unit: Department

  1. Published

    Definition of key performance indicators for energy efficient assessment in the transport sector

    Mantilla, R. M. F., Nieto Lee, A. & Lastra, J. L. M., 2015, SMARTGREENS 2015 - 4th International Conference on Smart Cities and Green ICT Systems, Proceedings. SCITEPRESS, p. 78-82 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  2. Published

    Delay effect from roll cover polymer material in paper finishing units

    Yuan, L., Järvenpää, V-M., Keskinen, E. & Cotsaftis, M., 2000, Proceedings of the 2nd IFAC Workshop on linear time delay systems, September 11-13, 2000, Ancona, Italy. Perdon, A. M. (ed.). p. 6 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  3. Published

    Delay excited vibrations in grinding wheel rotor system

    Järvenpää, V-M. & Yuan, L., 2014, Proceedings of the 21st International Congress on Sound and Vibration, In Depth Sound and Vibration Research 2014, ICSV21, 13-17 July, 2014, Beijing, China. Crocker, M. J., Pawelczyk, M. & Tian, J. (eds.). International Institute of Acoustics and Vibration (IIAV), p. 2437-2444 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  4. Published

    Design and analysis of a multipurpose double-acting hammering unit for hydraulic excavators

    Keskinen, E., Keskiniva, M. & Raunisto, Y., 1996, Proceedings of the 1996 Engineering Systems Design and Analysis Conference, Volume 9, Structural dynamics, vibration and buckling, July 1-4 1996, Montpellier, France. Ovunc, B. A. (ed.). France, p. 293-300

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  5. Published

    Design and First Operating Experiences with Extreme Value Research Engine EVE

    Aaltonen, J., Turunen, R., Kallio, I., Leino, A., Rantanen, P., Suokas, M., Ranta, O., Karila, K. & Liljenfeldt, G., 7 Jun 2004, In : CIMAC Congress 2004, Kyoto, Japan. p. 1-7 7 p., 32.

    Research output: Contribution to journalArticleScientificpeer-review

  6. Published

    Design education with simulation games

    Juuti, T., Lehtonen, T. & Hansen, P. K., 2008, Proceedings of NordDesign 2008, August 21-23, 2008, Tallinn University of Technology, Tallinn, Estonia. Roosimölder, L. (ed.). p. 325-332

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  7. Published

    Design education with simulation games

    Juuti, T., Hansen, P. K. & Lehtonen, T., 2008, Proceedings of the 10th Engineering and product design Eduacation International Conference, 4-5 September, 2008, Universitat Politecnica de Catalunya, Barcelona, Spain. Clarke, A., Evatt, M., Hogarth, P., Lloveras, J. & Pons, L. (eds.). p. 811-816

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  8. Published

    Design for configuration

    Riitahuhta, A., 1997, Konstruktionsdag 3.12.1997, Danmarks Tekniske Universitet. Tanska, p. 19 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  9. Published

    Design for Configuration

    Riitahuhta, A. (ed.) & Pulkkinen, A. (ed.), 2001, Springer Verlag.

    Research output: Book/ReportAnthologyScientificpeer-review

  10. Published

    Design for Configuration in Enabling Agility

    Pulkkinen, A., Lehtonen, T. & Riitahuhta, A., 1999, EPA'99 3rd International Conference on Engineering Design and Automation, Vancouver, Canada, August 1-4, 1999. p. 8 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  11. Published

    Design for configuration - methodology for product family development

    Pulkkinen, A., Lehtonen, T. & Riitahuhta, A., 1999, Proceedings of the 12th International Conference on Engineering Design, ICED 99, Munich, Germany, August 24-26, 1999. Lindemann, U. (ed.). p. s- 1495-1500

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  12. Published

    Design for human - virtual engineering is a media for knowledge transfer

    Leino, S-P. & Pulkkinen, A., 2012, The 12th International Design Conference, DESIGN 2012, 21-24 May, 2012, Dubrovnik, Croatia. Dorian, M., Mario, S., Neven, P. & Nenad, B. (eds.). Zagreb: Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb, p. 1507-1514 (International Design Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  13. Published

    Designing manufacturing dashboards on the basis of a Key Performance Indicator survey

    Tokola, H., Järvenpää, E., Gröger, C. & Niemi, E., 2016, 49th CIRP Conference on Manufacturing Systems (CIRP-CMS 2016) . Elsevier, (Procedia CIRP).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  14. Published

    Designing mobile work machines in cyber space

    Ellman, A., 2009, Service Robotics and Mechatronics, Selected Papers of the International Conference on Machine Automation ICMA2008, September 24-26, 2008, Awaji, Japan. Shirase, K. & Aoyagi, S. (eds.). p. 1-5 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  15. Published

    Design management in product development organisation - the elaboration of comprehensive design management model

    Juuti, T. & Lehtonen, T., 2010, NordDesign 2010 Conference, 25-27 August, 2010, Göteborg, Sweden. Dagman, A. & Söderberg, R. (eds.). p. 65-74

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  16. Published

    Design Management of Products with Variability and Commonality - Contribution to the Design Science by elaborating the fit needed between Product Structure, Design Process, Design Goals, and Design Organisation for Improved R&D Efficiency

    Juuti, T., 19 Dec 2008, Tampere University of Technology. 155 p. (Tampere University of Technology. Publication; vol. 789)

    Research output: Book/ReportDoctoral thesisMonograph

  17. Published

    Design management of product with variability and commonality

    Juuti, T., 2008, Tampere: Tampere University of Technology. 153 p. (Tampereen teknillinen yliopisto. Julkaisu; vol. 789)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  18. Published

    Design of a portable motion platform using pneumatic muscle actuators

    Jouppila, V., Itäsalo, A-V., Kuosa, J. & Ellman, A., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Sairala, H. & Koskinen, K. T. (eds.). Tampere: Scandinavian International Conference on Fluid Power, p. 1-15 15 p. (Scandinavian International Conference on Fluid Power SICFP).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  19. Published

    Design of customized power plant through the use of AI and expert system technology

    Riitahuhta, A. & Aho, K., 1991, International conference on engineering design ICED91, Zurich, August 27-29,. Zurich: WDK, p. 410-421

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  20. Published

    Design of Flexible Hydromechanical Manipulators with Active Control Against Fatigue and Vibrations

    Keskinen, E., Hirvonen, M. & Tuokko, R., 1992, IMACS/SICE International Symposium on Robotics, Mechatronics and Manufacturin g Systems 92, 16-20.9.-92, Kobe, Japani. p. 1467-1472

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  21. Published

    Design of fuzzy logic-based controller in roll grinding system with double regenerative chatter

    Yuan, L., Järvenpää, V-M. & Keskinen, E., 2004, Proceedings of IMECE2004, 2004 ASME International Mechanical Engineering Congress and RD&D Expo, Nobember 13-19, 2004, Anaheim, California, USA. p. 7 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  22. Published

    Design of product families

    Tichem, M., Andreasen, M. M. & Riitahuhta, A., 1999, Proceedings of the 12th International Conference on Engineering Design, ICED 99, Munich, Germany, August 24-26, 1999. Lindemann, U. (ed.). p. 1039-1042

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  23. Published

    Design reasoning patterns in NPD education design

    Juuti, T., Lehtonen, T., Rättyä, K., Halonen, N., Vanhatalo, M. & Kujansuu, P., 2014, Proceedings of 16th International Conference on Engineering and Product Design Education, University of Twente, Enschede, The Netherlands 4th-5th September 2014. Bohemia, E., Eger, A., Eggink, W., Kovacevic, A., Parkinson, B. & Wits, W. (eds.). The Design Society, p. 682-687 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  24. Published

    Design synthesis: integrated product and manufacturing system design

    Britton, G. & Torvinen, S., 2014, CRC Press. 358 p.

    Research output: Book/ReportBookScientificpeer-review

  25. Published

    Detection of abnormal energy patterns pointing to gradual conveyor misalignment in a factory automation testbed

    Khajehzadeh, N., Postelnicu, C. & Martinez Lastra, J. L., 2012, Proceedings of 2012 IEEE International Conference on Systems, Man, and Cybernetics, SMC 2012, 14-17 October, 2012, COEX, Seoul, Korea. Piscataway, NJ: IEEE, p. 1225-1229 (International Conference on Systems, Man, and Cybernetics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  26. Published

    Detection of fault modes of gear drive using neural net

    Miettinen, J., Lumme, V. E. & Siekkinen, V., 1997, COMADEM '97, 10th International Congress and Exhibition on Condition Monitoring and Diagnostic Engineering Management, Espoo, 9-11 June, 1997 VTT Symposium 172. Jantunen, E., Holmberg, K. & Rao, B. K. N. (eds.). Espoo: Technical Research Centre of Finland, p. 102-111 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  27. Published

    Determining reliability performance and maintenance costs of selected design solution and maintenance strategy

    Virtanen, S. & Hagmark, P-E., 2009, Proceedings of the 3rd World Congress on Engineering Asset Management and Intelligent Maintenance Systems Conference WCEAM-IMS 2008, 27 - 30 October, 2008, Beijing, China. Jinji, G., Lee, J., Ni, J., Ma, L. & Mathew, J. (eds.). p. 1568-1579

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  28. Published

    Developing communications between a service-enabled manufacturing system and a multi-agent system

    Villasenor Herrera, V., Vidales Ramos, A. & Martinez Lastra, J. L., 2009, 13th IFAC symposium on information control problems in manufacturing, INCOM '09, June 3-5, 2009, Moskow, Russia. p. 1608-1613

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  29. Published

    Developing competitive and sustainable performance metrics for an intelligent manufacturing environment

    Nylund, H., Lanz, M., Ranta, A., Ikkala, K. & Tuokko, R., 2010, Proceedings of International Scientific Conference on Management of Technology - Step to Sustainable Production, MOTSP 2010, 2-4 June, 2010, Rovinj, Croatia. Baric, G. & Dukic, G. (eds.). Zagreb: Faculty of Mechanical Engineering and Naval Architecture, p. 8 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  30. Published

    Developing engineering creativity in the early design stages of product development process

    Ryynänen, L. & Riitahuhta, A., 2010, Proceedings of The First International Conference on Design Creativity, ICDC 2010, 29 November-1 December, 2010, Kobe, Japan. p. 8 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  31. Published

    Developing VIP2M: A Virtual Environment for Prototyping Mobile Work Machines

    Kuusisto, J., Kaapu, T., Ellman, A. & Tiainen, T., 2012, Proceedings of the 12th International Design Conference, DESIGN 2012, 21-24 May, 2012, Dubrovnik, Croatia. Marjanovic, D., Storga, M., Pavkovic, N. & Bojcetic, N. (eds.). Zagreb: Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb, The Design Society, Glasgow, p. 657-666 (International Design Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  32. Published

    Development and applications of the inverse operators in continuum mechanics

    Holopainen, S., 2008, 8th World Congress of Computational Mechanics WCCM8, 5th European Congress on Computational Methods in Applied Sciences and Engineering ECCOMAS 2008, June 30 - July 5, 2008, Venice, Italy. Schrefler, B. A. (ed.). p. pp. 195

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  33. Published

    Development and numerical implementation of an anisotropic continuum damage model for concrete

    Hartikainen, J., Kolari, K. & Kouhia, R., 2016, Advances in Fracture and Damage Mechanics XV. Trans Tech Publications Ltd, p. 115-118 4 p. (Key Engineering Materials; vol. 713).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  34. Published

    Development of a complete contact fretting test device

    Juoksukangas, J., Lehtovaara, A. & Mäntylä, A., 2013, In : Proceedings of the institution of Mechanical Engineers Part J: Journal of Engineering Tribology. 227, 6, p. 570-578

    Research output: Contribution to journalArticleScientificpeer-review

  35. Published

    Development of a flexible gripper system for small optical assemblies

    Heikkilä, R., Prusi, T., Remes, M., Tuokko, R., Ha, T. H., Song, J. Y. & Lee, C. W., 2009, 4M/ICOMM 2009, The Global Conference on Micro Manufacture, Incorporating the 5th International Conference on Multi-Material Micro Manufacture (4M) and the 4th International Conference on Micro Manutacturing (ICOMM), 23rd-25th September 2009, Karlsruhe, Germany. Saile, V., Ehmann, K. & Dimov, S. (eds.). p. 371-374

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  36. Published

    Development of a high pressure twin disc test device for the simulation of gear contact

    Kleemola, J. & Lehtovaara, A., 2006, In : Tribologia - Finnish Journal of Tribology. 25, 2, p. 8-17

    Research output: Contribution to journalArticleScientificpeer-review

  37. Published

    Development of an on-line condition monitoring system based on ferrography

    Iivonen, H. & Aho, K., 1987, International Conference, Tribology - Friction, Lubrication and Wear, Fifty Years on, London 1-3.7. Proceedings of the Institution of Mechanical Engineers. p. 877-882

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  38. Published

    Development of a rule-base for matching product requirements against resource capabilities in an adaptive production system

    Järvenpää, E., Luostarinen, P., Lanz, M. & Tuokko, R., 2012, The 22nd International Conference on Flexible Automation and Intelligent Manufacturing , FAIM 2012, 10-13 June, 2012, Helsinki, Finland. Hasse, N., Satu, K., Ville, T. & Seppo, T. (eds.). Tampere: Tampere University of Technology. Department of Production Engineering, p. 449-456 (International Conference on Flexible Automation and Intelligent Manufacturing).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  39. Published

    Development of a test device for the evaluation of fretting in point contact

    Pasanen, A., Järvisalo, S., Lehtovaara, A. & Rabb, R., 2009, In : Lubrication Science. 21, 2, p. 41-52

    Research output: Contribution to journalArticleScientificpeer-review

  40. Published

    Development of a test device for the evaluation of hydrodynamic lubrication in thrust bearings

    Pasanen, A., Kleemola, J. & Lehtovaara, A., 2008, In : Tribologia - Finnish Journal of Tribology. 27, 4, p. 12-20

    Research output: Contribution to journalArticleScientificpeer-review

  41. Published

    Development of a test device for the evaluation of journal bearings

    Sandvik, K., Lehtovaara, A., Makkonen, E., Kallio, M., Kuvaja, K. & Kuokkala, V-T., 2012, In : Tribologia - Finnish Journal of Tribology. 31, 1-2, p. 12-21

    Research output: Contribution to journalArticleScientificpeer-review

  42. Published

    Development of a test rig for reciprocating seals in heavy load conditions

    Juoksukangas, J., Lehtovaara, A., Miettinen, J., Tolvanen, P., Järvelä, P. & Niemi, A-M., 2010, 14th Nordic Symposium on Tribology, Nordtrib 2010, Storforsen, Sweden, Luleå University of Technology. p. 1-8 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  43. Published

    Development of intelligent gripper systems for microfactories

    Heikkilä, R., Prusi, T., Ha, T. H., Song, J. Y., Lee, C. W. & Tuokko, R., 2011, 7th International Workshop on Micromanufacturing Technology, IWMT 2011, 18 August, 2011, Jeju-do, Korea. Jeju-do: IWMT 2011, p. 26-28 (International Workshop on Micromanufacturing Technology IWMT).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  44. Published

    Development of micro gripper systems for microfactories

    Heikkilä, R., Remes, M., Prusi, T. & Tuokko, R., 2008, Proceedings of the 4th International Workshop on Microfactory Technology, 10-11 July, 2008, Jeju-do, Korea. p. 4 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  45. Published

    Development of process for adaptive lifetime estimation of mechanical assemblies using accelerated testing methods

    Hietala, J-P., Ojala, P., Multanen, P., Miettinen, J. & Saarenrinne, P., 26 Oct 2016, Risk, Reliability and Safety: Innovating Theory and Practice : Proceedings of the 26th European Safety and Reliability Conference, ESREL 2016, Glasgow, Scotland, 25-29 September 2016. Walls, L., Revie, M. & Bedford, T. (eds.). CRC Press; Taylor & Francis, 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  46. Published

    Development of the numerical solver for EHL line contact problems

    Lehtovaara, A., 1998, In : Tribology - Finnish Journal of Tribology. 17, 1, p. 3-14

    Research output: Contribution to journalArticleScientificpeer-review

  47. Published

    DFMA Implementation in high variability product context

    Lahtinen, T., Berkovits, J. & Riitahuhta, A., 2012, Proceedings of the 9th International Symposium on Tools and Methods of Competitive Engineering, TMCE 2012, 7-11 May, 2012, Karlsruhe, Germany. Imre, H., Zoltan, R., Albert, A. & Mathias, B. (eds.). Delft, Netherlands: Delft University of Technology, p. 915-926 (International Symposium on Tools and Methods of Competitive Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  48. Published

    Diagnosis of a Heat Leverel by Vibration Signature Monitoring

    Salmenperä, P., Miettinen, J. & Määttä, T., 2002, Proceedings of ETCE 2002, February 4-6, 2002, Houston, Texas. p. 4 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  49. Published

    Diagnosis of multi-descriptor condition monitoring data

    Lumme, V., 2011, 2011 IEEE Conference on Prognostics and Health Management PHM, 20.-23.6.2011, Denver, CO, USA. Piscataway, NJ: IEEE, p. 1-10 10 p. 6024327. (IEEE Conference on Prognostics and Health Management PHM).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  50. Published

    Diagnostics and prognostics of disturbances and faults in air fans

    Järvinen, V., Miettinen, J. & Salmenperä, P., 2007, Second World Congress on Engineering Asset Management EAM and Fourth International Conference on Condition Monitoring, 11-14 June, 2007, Harrogate, UK. p. 825-834

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

Previous 1...3 4 5 6 7 8 9 10 ...29 Next

ID: 22256