Tampere University of Technology

TUTCRIS Research Portal

Department of Mechanical Engineering and Industrial Systems

Research unit: Department

  1. Article › Professional
  2. Published

    VTT kehitti lisäominaisuuksia lineaariyksikölle. Pneumaattisen paikoituksen

    Kaivola, R., 1990, In : Tekniikka & Talous. 30, 10, p. 17-17

    Research output: Contribution to journalArticleProfessional

  3. Published

    Water Hydraulics Pushes Into High-Pressure Systems

    Koskinen, K. T. & Aaltonen, J., 2014, In : Hydraulics & Pneumatics. 67, 2, p. 84-89 4 p.

    Research output: Contribution to journalArticleProfessional

  4. Article › General public
  5. Published

    Ajovarustestandardit valmistuvat

    Kaivola, R., 1998, In : Bike. 10, p. 53-54

    Research output: Contribution to journalArticleGeneral public

  6. Published

    Haluatko pysyä hengissä?

    Kaivola, R., 1996, In : Super bike. 3, p. 42-44

    Research output: Contribution to journalArticleGeneral public

  7. Published

    Hyvä valmentaja ohjaa huipputulokseen

    Kaivola, R., 1997, In : Anturi. 2, p. 8-8

    Research output: Contribution to journalArticleGeneral public

  8. Published

    Innovatiivisuus ja ympäristöasiat tevan uudet haasteet

    Kaivola, R., 1997, In : Anturi. 6, p. 5-5

    Research output: Contribution to journalArticleGeneral public

  9. Published

    Kemia kuntoon vauhdilla

    Kaivola, R., 1997, In : Anturi. 5, p. 4-4

    Research output: Contribution to journalArticleGeneral public

  10. Published

    Kuuroksi ei tarvitse tulla

    Kaivola, R. A., 1993, In : MP-Lehti. 6, p. 24-26

    Research output: Contribution to journalArticleGeneral public

  11. Published

    Lämmin sointi lasikellon alla

    Kaivola, R., 1996, In : Tekniikan maailma. 6, p. 50-52

    Research output: Contribution to journalArticleGeneral public

  12. Published

    Liekki ruiskuttaa väriä

    Kaivola, R., 1997, In : Anturi. 2, p. 6-6

    Research output: Contribution to journalArticleGeneral public

  13. Published

    Lisensiaattitutkinto puhuttaa

    Kaivola, R., 1997, In : Anturi. 7

    Research output: Contribution to journalArticleGeneral public

  14. Published

    Loud is out

    Kaivola, R., 1995, In : Super bike. 5, p. 62-65

    Research output: Contribution to journalArticleGeneral public

  15. Published

    Motoristibongauksen lyhyt oppimäärä

    Kaivola, R., 1997, In : Helsingin sanomat. 21, p. 39-39

    Research output: Contribution to journalArticleGeneral public

  16. Published

    Nerous, lahjakkuus ja sisukkuus auttoivat alkuun

    Kaivola, R., 1997, In : Anturi. 8, p. 6-6

    Research output: Contribution to journalArticleGeneral public

  17. Published

    Plasmatekniikassa tutkitaan timanttikalvoja

    Kaivola, R., 1997, In : Anturi. 4, p. 4-4

    Research output: Contribution to journalArticleGeneral public

  18. Published

    Ruudulta malliksi, pian!

    Kaivola, R., 1997, In : Anturi. 2, p. 6-6

    Research output: Contribution to journalArticleGeneral public

  19. Published

    Simuloinnilla kilpailukykyä laitostoimituksiin

    Kaivola, R., 1997, In : Anturi. 7

    Research output: Contribution to journalArticleGeneral public

  20. Published

    Teemu Karppila, diplomi-insinööri

    Kaivola, R., 1997, In : Anturi. 1, Abi-liite, p. 1-1 1 p.

    Research output: Contribution to journalArticleGeneral public

  21. Published

    Tekniikka ei pelota TTKK:n naisia

    Kaivola, R., 1997, In : Anturi. 1, Abi-liite, p. 1-1 1 p.

    Research output: Contribution to journalArticleGeneral public

  22. Published

    Tekniikka tarvitsee vahtikoiran

    Kaivola, R. & Lapintie, K., 1996, In : Helsingin sanomat. p. 71-72

    Research output: Contribution to journalArticleGeneral public

  23. Published

    Tuotantotekniikka tähtää tutkimuksen huippuyksiköksi

    Kaivola, R., 1997, In : Anturi. 6

    Research output: Contribution to journalArticleGeneral public

  24. Published

    Tuotekehitys saa vauhtia uusista pikamalleista

    Kaivola, R., 1997, In : Tekniikka ja Talous. p. 5-5

    Research output: Contribution to journalArticleGeneral public

  25. Published

    Turvallinen liikenne ei ole utopiaa

    Kaivola, R., 1997, In : Helsingin sanomat. p. E2-E2

    Research output: Contribution to journalArticleGeneral public

  26. Published

    Työkoneiden kokonaisteho harvoin käytössä

    Kaivola, R., 1994, In : Helsingin sanomat. p. d2-d2

    Research output: Contribution to journalArticleGeneral public

  27. Published

    Uudet mittausmenetelmät parantavat teollisuusprosesseja

    Kaivola, R., 1995, In : Tekniikka & Talous. 42

    Research output: Contribution to journalArticleGeneral public

  28. Published

    Vesihydrauliikalle uusia sovelluksia

    Kaivola, R., 1995, In : Tiede 2000. 8

    Research output: Contribution to journalArticleGeneral public

  29. Published

    Ympäristötietous on insinöörille olennainen asia

    Kaivola, R., 1997, In : Aamulehti. 17.8., p. 2-2

    Research output: Contribution to journalArticleGeneral public

  30. Review Article › Scientific › Peer-reviewed
  31. Published

    The most important parameters affecting of fretting situation and fretting mechanism: litterature review

    Iivonen, H. & Aho, K., 1986, In : Tribologia - Finnish Journal of Tribology. 5, 3-4, p. 32-45

    Research output: Contribution to journalReview ArticleScientificpeer-review

  32. Special issue › Scientific › Peer-reviewed
  33. Published

    Big data tulee – nykytila ja tulevaisuuden mahdollisuudet

    Holopainen, S. (Guest ed.) & Kuusi, O. (Guest ed.), Jun 2016, In : Futura. 2, 113 p.

    Research output: Contribution to journalSpecial issueScientificpeer-review

  34. Chapter › Scientific › Not peer-reviewed
  35. Published

    Configuration and modularisation

    Riitahuhta, A., 1999, Critical Enthusiasm - A contribution to the development of design science. Mortensen, N. H. & Sigurjónsson, J. (eds.). Trondheim: TAPIR trykk, p. 167-181

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  36. Published

    Micro-factories

    Järvenpää, E., Heikkilä, R., Siltala, N., Prusi, T. & Tuokko, R., 2015, Micromanufacturing Engineering and Technology. 2 ed. Elsevier, p. 549-579

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  37. Published

    Towards energy-aware future factories

    Karnouskos, S. & Martinez Lastra, J. L., 2009, ICT and energy efficiency, The case for manufacturing. Recommendations of the consultation group. Luxembourg: European Commission, p. 1-37 37 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  38. Chapter › Scientific › Peer-reviewed
  39. Published

    Active vibration control and multibody rolling contact system

    Järvenpää, V-M. & Yuan, L., 2009, Motion and Vibration Control. Ulbrich, H. & Ginzinger, L. (eds.). Springer, p. 155-164

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  40. Published

    Activity report of COST Action TU0905 Working Group 2 – Material characterization and material improvement

    Schneider, J., Karvinen, R., Vandebroek, M. & Savineau, G., 2014, Proceedings volume of the Challenging Glass 4 & COST Action TU0905 Final Conference, 6-7 February 2014 at the EPFL in Lausanne, Switzerland. Louter, C., Bos, F., Belis, J. & Lebet, J-P. (eds.). CRC Press, p. 21-24 4 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  41. Published

    Adaptation of manufacturing systems in dynamic environment based on capability description method

    Järvenpää, E., Luostarinen, P., Lanz, M. & Tuokko, R., 2012, Manufacturing systems. Faieza, A. A. (ed.). Rijeka, Croatia: InTech, p. 93-118

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  42. Published

    Agent-based Control for Desktop Assembly Factories

    Martinez Lastra, J. L., Insaurralde, C. & Colombo, A., 2009, Collaboratiove design and planning for digital manufacturing. Wang, L. & Nee, A. Y. C. (eds.). Springer, p. 265-291

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  43. Published

    Allocation of Dependability Requirements in Power Plant Design

    Virtanen, S. & Hagmark, P-E., 2002, Case Studies in Reliability an d Maintenance. Blischke, W. R. & Murthy, D. N. P. (eds.). p. 85-107 23 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  44. Published

    An open-architecture approach to knowledge-based CAD

    Mishelewich, D. J., Katajamäki, M., Karras, T., Axworthy, A., Lehtimäki, H., Riitahuhta, A. & Levitt, R. E., 1992, In: Tong, C. & Sriram, D., Artificial Intelligence in Engineering Design, Vol yme III, Knowledge Acquisition, Commercial Systems, and Interated Enviroments , Chapter 5. USA: Academic Press, Inc., p. 125-178

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  45. Published

    Assembly line balancing and sequencing

    Uddin, K. M. & Martinez Lastra, J. L., 2011, Assembly Line - Theory and Practice. Grzechca, W. (ed.). Croatia: InTech, p. 13-36

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  46. Published

    Automatic component selection.

    Paasiala, P., Aaltonen, A. & Riitahuhta, A., 1993, Realising CIM's Industrial Potential. Kooij, C., MacConaill, P. A. & Bastos, J. (eds.). Amsterdam: IOS Press, p. 303-313

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  47. Published

    CO-Based Outdoor Smart Lighting for Energy Aware Factory

    Florea, A., Farahat, A., Postelnicu, C., Martinez Lastra, J. L. & Azcondo Sánchez, F. J., 2014, Internet of Things Based on Smart Objects. Fortino, G. & Trunfio, P. (eds.). Springer International Publishing, p. 69-83 15 p. (Internet of Things).

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  48. Published

    Digital manufacturing supporting autonomy and collaboration of manufacturing systems

    Nylund, H. & Andersson, P. H., 2012, Manufacturing systems. Faieza, A. A. (ed.). Rijeka, Croatia: InTech, p. 261-284

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  49. Published

    Dynamics of wire-driven machine mechanisms: Literature review

    Karvinen, T. & Keskinen, E., 2010, Dynamical Systems: Discontinuity, Stochasticity abd Time-Delay. Luo Albert, C. J. (ed.). p. 285-298

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  50. Published

    Dynamics of wire-driven machine mechanisms, Part II: Theory and applications

    Keskinen, E., Karvinen, T. & Montonen, J., 2010, Dynamical Systems: Discontinuity, Stochasticity abd Time-Delay. Luo Albert, C. J. (ed.). p. 299-317

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  51. Published

    Factory level logistics and control aspects for flexible and reactive microfactory concept

    Järvenpää, E., Heikkilä, R. & Tuokko, R., 2010, Frontiers of Assembly and Manufacturing - Selected papers from ISAM 2009. Lee, S., Suarez, R. & Choi, B-W. (eds.). Springer-Verlag Berlin Heidelberg, p. 127-140

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  52. Published

    Implementing circulating oil lubrication systems based on the IMC-AESOP architecture

    Camp, R. & Lobov, A., 2014, Industrial cloud-based cyber-physical systems. The IMC-AESOP approach. Colombo, A. W., Bangemann, T., Karnouskos, S., Delsing, J., Stluka, P., Harrison, R., Jammes, F. & Martinez Lastra, J. L. (eds.). Springer, p. 183-202 20 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  53. Published

    Manifolds on continuum mechanics

    Mäkinen, J., 2010, Continuum Mechanics. Koppel, A. & Oja, J. (eds.). Nova Science Publishers, p. 1-52 52 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  54. Published

    Open Product Development

    Riitahuhta, A., Lehtonen, T., Pulkkinen, A. & Huhtala, P., 2011, The future of design methodology. Birkhofer, H. (ed.). London: Springer, p. 135-146

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  55. Published

    Perturbation analysis of nip contact delay system

    Yuan, L. & Järvenpää, V-M., 2007, Nonlinear Science and Complexity. Transactions of Nonlinear Science and Complexity. Luo, A. C. J. (ed.). p. 222-230

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  56. Published

    Rotation manifold SO(3) and its tangential vectors

    Mäkinen, J., 2009, Lie Groups: New Research. Canterra, A. B. (ed.). Nova Science Publisher, p. 61-88

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

Previous 1...3 4 5 6 7 8 9 10 ...29 Next

ID: 22256