Tampere University of Technology

TUTCRIS Research Portal

Department of Mechanical Engineering and Industrial Systems

Research unit: Department

  1. A4 Article in a conference publication
  2. Published

    Potentials of web standards for automation control in manufacturing systems

    Borja Ramis, F., Iarovyi, S., Lobov, A. & Martinez Lastra, J. L., 2015, 2015 IEEE European Modelling Symposium. p. 359-366 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  3. Published

    Energy efficiency evaluation method for machine tools

    Ikkala, K., Lanz, M., Kiviö, J. & Coatanéa, E., 2015, Flexible Automation and Intelligent Manufacturing 2015. The Choir Press, p. 58-65 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  4. Published

    Production as a key factor for driving competitiveness in manufacturing industry

    Majuri, M., Tapaninaho, M., Tuokko, R. & Torvinen, S., 2014, Proceedings of the 24th International Conference on Flexible Automation and Intelligent Manufacturing, FAIM2014, 20th -23rd May, San Antonio, Texas, USA. Chen, F. F. (ed.). Lancaster, Pennsylvia: DEStech Publications, p. 209-214 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  5. Published

    Impacts of making design decision sequence explicit on NPD project in forest machinery company

    Halonen, N., Lehtonen, T. & Juuti, T., 2014, Proceedings of 10th NordDesign 2014 Conference, Espoo, August 27-29, Aalto University. Laakso, M. & Ekman, K. (eds.). Espoo: Aalto Desingn Factory, p. 702-711 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  6. Published

    Image Based Local Strain Measurement of Wood

    Moilanen, C. S., Saarenrinne, P., Engberg, B. A. & Björkqvist, T., 2014, Advancement of Optical Methods in Experimental Mechanics Volume 3, Conference Proceedings of the Society for Experimental Mechanics Series. Jin, H., Sciammarella, C., Yoshida, S. & Lamberti, L. (eds.). Berlin: Springer, p. 339-345 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  7. Published

    Issue of using students as test users - some findings in VE testing

    Tiainen, T. & Ellman, A., 2014, Proceedings of the DESIGN 2014 13th International design conference, May 19-22, 2014, Dubrovnik - Croatia. Majanovic, D., Storga, M., Pavkovic, N. & Bojcetic, N. (eds.). Croatia: Facalty of Mechanical Engineering and Naval Architecture, University of Zagreb; The Design Society, Glasgow, p. 615-622 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  8. Published

    A Semi-Fidelity Training Simulator: Promising Opportunities for Student-Centered Learning

    Kaapu, T., Tiainen, T. & Ellman, A., 2014, Proceedings of the 22nd European Conference on Information Systems, ECIS 2014, June 9-11, 2014,Tel Aviv. 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  9. Published

    Influence of laser hardening to the sliding wear resistance of the PVD (Al,Ti) N-G and nACo(Registered trademark) coatings

    Surzhenkov, A., Adoberg, E., Antonov, M., Sergejev, F., Mikli, V., Viljus, M., Latokartano, J. & Kulu, P., 2014, 22nd International Baltic Conference on Engineering Materials and Tribology, BALTMATTRIB 2013; Riga Latvia; 14 November 2013 through 15 November 2013. Trans Tech Publications Ltd, p. 28-31 4 p. (Key Engineering Materials; vol. 604).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  10. Published

    Energy efficient outdoor lighting: an implementation

    Farahat, A., Florea, A., Martinez Lastra, J. L., Branas Reyes, C. & Azcondo, F. J., 2014, 2014 IEEE 15th Workshop on Control and Modeling for Power Electronics (COMPEL), 22-25 June 2014, University of Cantabria, Santander, Spain. Piscataway: The Institute of Electrical and Electronics Engineers, p. 1-5 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  11. Published

    Hopf bifurcation of nonlinear contact force in grinding system

    Yuan, L., Järvenpää, V-M. & Virtanen, S., 2014, Proceedings of the 21st International Congress on Sound and Vibration, In Depth Sound and Vibration Research, 2014, ICSV21, 13-17 July, 2014, Beijing, China. Crocker, M. J., Pawelczyk, M. & Tian, J. (eds.). International Institute of Acoustics and Vibration (IIAV), p. 2445-2452 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  12. Published

    Sustainability and Performance Indicators Landscape

    Lanz, M., Järvenpää, E., Nylund, H., Tuokko, R., Torvinen, S. & Georgoulias, K., 2014, Proceedings of the 24th International Conference on Flexible Automation and Intelligent Manufacturing, FAIM2014, 20th -23rd May, San Antonio, Texas, USA. Chen, F. F. (ed.). Lancaster, Pennsylvia: DEStech Publications, p. 283-290 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  13. Published

    Simulation Based Methods for Flexible Maintenance Program Development

    Aaltonen, J., Koskinen, K. T., Vainio, H. & Martinsuo, M., 2014, EuroMaintenance 2014, Congress proceedings May 5-7, Helsinki, Finland, 22nd European Congress & Expo on Maintenance and Asset Management, 6th World Congress & Global Forum on Maintenance and Asset Management. European Federation of National Maintenance Societies, p. 446-450 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  14. Published

    Image Stitching Based Measurements of Medical Screws

    Cenev, Z., Prusi, T. & Tuokko, R., 2014, Precision Assembly Technologies and Systems. 7th IFIP WG 5.5 International Precision Assembly Seminar, IPAS 2014, Chamonix, France, February 16-18, 2014, Revised Selected Papers. Ratchev, S. (ed.). Springer Berlin Heidelberg, p. 69-78 10 p. (IFIP Advances in Information and Communication Technology; vol. 435).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  15. Published

    Innovative tool for specifying customer requirements

    Ellman, A., Wendrich, R. & Tiainen, T., 2014, Proceedings of the ASME 2014 International Design and Engineering Technical Conferences & Computers and Information in Engineering Conference IDECT/CIE 2014, August 17-20, 2014, Buffalo, New York, USA. p. 1-5 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  16. Published

    Requirements for Manufacturing Operations Management and Control Systems in a Dynamic Environment

    Järvenpää, E., Tokola, H., Salonen, T., Lanz, M., Koho, M. & Tuokko, R., 2014, Proceedings of the 24th International Conference on Flexible Automation and Intelligent Manufacturing, FAIM2014, 20th -23rd May, San Antonio, Texas, USA. Chen, F. F. (ed.). Lancaster, Pennsylvia: DEStech Publications, p. 1135-1142 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  17. Published

    Hermetic room temperature glass welding technology

    Lundén, H., Kumpulainen, T., Määttänen, A. & Vihinen, J., 2014, 2014 NSTI Nanotechnology Conference and Expo, NSTI-Nanotech 2014 June 15-18, 2014, Washington, DC, USA. Nano Science and Technology Institute, p. 13-16 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  18. Published

    A Continuum damage model for quasi-brittle materials

    Yaghoubi, S. T., Kouhia, R., Hartikainen, J. & Kolari, K., 2014, Proceedings of NSCM-27: the 27th Mechanics Nordic Seminar on Computational Mechanics. Eriksson, A., Kulachenko, A., Mihaescu, M. & Tibert, G. (eds.). Stockholm: KTH Mechanics, p. 160-163 4 p. (TRITA-MEK Technical report; no. 24).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  19. Published

    Model-based development in the domain of mobile machines

    Jouppila, V., Kaapu, T., Sjöstedt, C-J., Ellman, A. & Chen, D-J., 2014, Digital proceedings of the tenth International Symposium on Tools and Methods of Competitive Engineering - TMCE 2014, May 19-23, Budapest, Hungary. Horvath, I. & Rusak, Z. (eds.). Delft: Delft University of Technology, p. 759-772 14 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  20. Published

    A case study of share of ICT infrastructure in energy consumption of discrete manufacturing facility

    Sohail, M., Florea, A. & Martinez Lastra, J. L., 2014, 2014 IEEE 15th Workshop on Control and Modeling for Power Electronics (COMPEL), 22-25 Junen 2014, University of Cantabria, Santander, Spain. Piscataway: The Institute of Electrical and Electronics Engineers IEEE, p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  21. Published

    Concerns over students role as test users in virtual environments

    Tiainen, T. & Ellman, A., 2014, Proceedings of the 18th Academic MindTrek Conference 2014 "Media business, management, content & services" 4-6 November, 2014, Tampere, Finland. Lugmayr, A., Franssila, H. & Paavilainen, J. (eds.). New York, NY: The Association for Computing Machinery, p. 11-18 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  22. Published

    Novel glass welding technique for hermetic encapsulation

    Lundén, H., Kumpulainen, T., Määttänen, A. & Vihinen, J., 2014, 5th Electronics System-Integration Technology Conference, ESTC 2014, September 16-18, 2014, Helsinki, Finland. Piscataway, NJ: Institute of Electrical and Electronics Engineers IEEE, p. 1-4 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  23. Published

    Product life cycle disposition model

    Halonen, N., Lehtonen, T., Pakkanen, J., Juuti, T., Ellman, A. & Riitahuhta, A., 2014, Proceedings of the DESIGN 2014 13th International Design Conference , May 19-22, 2014, Dubrovnik - Croatia. Majanovic, D., Storga, M., Pavkovic, N. & Bojcetic, N. (eds.). Croatia: The Design Society, p. 831-840 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  24. Published

    Knowledge-based web service integration for industrial automation

    Ramis Ferrer, F. D. B., Gonzalez Moctezuma, L. E., Iarovyi, S., Lobov, A., Martinez Lastra, J. L., Vyatkin, V. & Dai, W., 2014, Proceedings 2014 12th IEEE International Conference on Industrial Informatics (INDIN), Porto Alegre, RS, Brazil, 27-30 July, 2014. Piscataway: Institute of Electrical and Electronics Engineers IEEE, p. 733 - 739 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  25. Published

    High Performance Particle Tracking Velocimetry for Fluidized Beds

    Elfvengren, J., Kolehmainen, J. & Saarenrinne, P., 2014, VISAPP 2014, Proceedings of the 9th International Conference on Computer Vision Theory and Applications , Volume 3, Lisbon, Portugal, 5-8 January, 2014. Battiato, S. & Braz, J. (eds.). SCITEPRESS, p. 441-449 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  26. Published

    Design reasoning patterns in NPD education design

    Juuti, T., Lehtonen, T., Rättyä, K., Halonen, N., Vanhatalo, M. & Kujansuu, P., 2014, Proceedings of 16th International Conference on Engineering and Product Design Education, University of Twente, Enschede, The Netherlands 4th-5th September 2014. Bohemia, E., Eger, A., Eggink, W., Kovacevic, A., Parkinson, B. & Wits, W. (eds.). The Design Society, p. 682-687 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  27. Published

    Local compression behaviour of pre-fatigued and chemically pre-treated wood at high strain rate and high temperature

    Moilanen, C., Engberg, B. A. K., Björkqvist, T., Salminen, L. & Saarenrinne, P., 2014, International Mechanical Pulping Conference, IMPC 2014, 2-5 June 2014, Helsinki, Finland, PULPAPER 2014, 3-5 June, 2014, Helsinki, Finland. AEL, p. 1-4 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  28. Published

    Delay excited vibrations in grinding wheel rotor system

    Järvenpää, V-M. & Yuan, L., 2014, Proceedings of the 21st International Congress on Sound and Vibration, In Depth Sound and Vibration Research 2014, ICSV21, 13-17 July, 2014, Beijing, China. Crocker, M. J., Pawelczyk, M. & Tian, J. (eds.). International Institute of Acoustics and Vibration (IIAV), p. 2437-2444 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  29. Published

    Application of Design Review to Probabilistic Risk Assessment in a Large Investment Project

    Virtanen, S., Penttinen, J-P., Kiiski, M. & Jokinen, J., 2014, Proceedings of the Probabilistic Safety Assessment and Management PSAM12, June 2014, Honolulu, Hawaii. p. 1-12 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  30. Published

    PTV and PIV based dispersed phase velocity measurements in a pseudo-2D turbulent fluidized bed

    Kolehmainen, J., Elfvengren, J., Ylönen, M., Saarenrinne, P., Kallio, S. & Peltola, J., 2014, Proceedings of the International Conference on Heat Transfer and Fluid Flow, (HTFF´14), Prague, Czech Republic, August 11-12, 2014. Avestia Publishing, International ASET, p. 1-9 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  31. Published

    Inkjet printed nano-particle Cu process for fabrication of re-distribution layers on silicon wafer

    Soltani, A., Kumpulainen, T. & Mäntysalo, M., 2014, 2014 IEEE 64th Electronic Components and Technology Conference (ECTC), 27-30 May 2014, Orlando, FL. Institute of Electrical and Electronics Engineers IEEE, p. 1685-1689 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  32. Published

    Easurement of solids velocity and concentration in a large cold CFB model

    Peltola, J., Karvonen, L., Elfvengren, J., Kolehmainen, J., Kallio, S., Pallares, D. & Johnsson, F., 2014, CFB-11: Proceedings of the 11th International Conference on Fluidized Bed Technology, Beijing, China, 14-17 May 2014. p. 589-594

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  33. Published

    Jet pump performance in liquid and gas pumping

    Mikkonen, A. & Karvinen, R., 2014, MFIP13, 13th International conference on multiphase flow in industrial plants, Mediterrean Foundation, Sestri Levante (Genova), Italy, 17-19 September 2014. Genova: Italian association of industrial plant enginnering; University of Genova Polytechnic school; Iltalian association of chemical engineering, p. 1-11 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  34. Published

    High-speed Sliding Friction of Laser-textured Silicon Nitride in Water against Rubber

    Ismailov, A., Kumpulainen, T., Vihinen, J. & Levänen, E., 2014, Proceedings of the Twenty Eighth International Conference on Surface Modification Technologies. p. 267-273 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  35. Published

    Surface Processing of Zirconia Ceramics by Laser

    Kumpulainen, T., Ismailov, A., Hyvärinen, L., Levänen, E. & Vihinen, J., 2014, Proceedings of the Twenty Eighth International Conference on Surface Modification Technologies. p. 275-284 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  36. Published

    Modeling of Age-Dependent Failure Tendency from Incomplete Data

    Hagmark, P. & Laitinen, J., 2014, Engineering Asset Management 2011: Proceedings of the Sixth World Congress on Engineering Asset Management. Lee, J., Ni, J., Sarangapani, J. & Mathew, J. (eds.). London: Springer-Verlag London Limited, p. 449-459 11 p. (Lecture Notes in Mechanical Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  37. Published

    Smart lighting in multipurpose outdoor environments: energy efficient solution using network of cooperating objects

    Florea, A., Farahat, A., Postelnicu, C., Martinez Lastra, J. L. & Azcondo Sanchez, F. J., 2013, Proceedings of 4th international workshop on networks of cooperating objects for smart cities 2013 (CONET/UBICITEC 2013), Philadelphia, USA, April 8, 2013. Fortino, G., Karnouskos, S., Marron, P. J. & Martinez Lastra, J. L. (eds.). CEUR-WS.org, p. 1-13 13 p. (CEUR Workshop Proceedings; vol. 1002).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  38. Published

    Capability of the turret punch press process: Intelligence between design and manufacturing

    Lohtander, M., Järvenpää, E. & Varis, J., 2013, 2013 IEEE International Symposium of Assembly and Manufacturing (ISAM), July 30th – Aug 2nd 2013, Xi’an, China. Piscataway: Institute of Electrical and Electronics Engineers IEEE, p. 180-182 3 p. (International Symposium on Assembly and Manufacturing).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  39. Published

    Case study on the relation of PLM maturity, architecture and business processes

    Pulkkinen, A., Vainio, V. & Rissanen, N., 2013, Product Lifecycle Management for Society, Proceedings of 10th IFIP WG 5.1 International conference, PLM 2013, Nantes, France, July 6-10, 2013,. Bernard, A., Rivest, L. & Dutta, D. (eds.). Berlin: Springer, p. 432-438 7 p. (IFIP Advances in Information and Communication Technology; vol. 409).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  40. Published

    Impacts of Product Lifecycle and Production System Design on Competitive and Sustainable Production

    Nylund, H., Tapaninaho, M., Torvinen, S. & Andersson, P. H., 2013, 23rd International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 13, The challenge of sustaining global competitive manufacturing systems, 26-28 June 2013 Porto Portugal, Advances in Sustainable and Competitive Manufacturing Systems. Azevedo, A. (ed.). Switzerland: Springer International Publishing, p. 3-13 11 p. (Lecture Notes in Mechanical Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  41. Published

    Social Media in Manufacturing: Just Hype or Concrete Benefits?

    Lanz, M. & Torvinen, S., 2013, 23rd International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 13, The challenge of sustaining global competitive manufacturing system, 26-28 June 2013 Porto Portugal, Advances in Sustainable and Competitive Manufacturing Systems. Azevedo, A. (ed.). Switzerland: Springer International Publishing, p. 1023-1034 (Lecture Notes in Mechanical Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  42. Published

    Decision support tool for retrofitting a district towards district as a service

    Florea, A., Postelnicu, C., Martinez Lastra, J. L., Larranaga, M., Marquez Contreras, J. A., Presser, M., Plambech, T., Colino, A. & Bayona Pons, V. M., 2013, Conference booklet, IECON 2013, 39th Annual Conference of the IEEE Industrial Electronics Society in conjunction with IWIES 2013: 1st International workshop on intelligent energy systems, Austria Center, Vienna, Austria, 10-14 November 2013. Piscataway, NJ: Institute of Electrical and Electronics Engineers, IEEE, p. 70-75 6 p. (Annual Conference of the IEEE Industrial Electronics Society).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  43. Published

    Semantic information management for user and context aware smart home with social services

    Evchina, Y., Dvoryanchikova, A. & Martinez Lastra, J. L., 2013, 3rd IEEE International Multi-Disciplinary Conference on Cognitive Methods in Situation Awareness and Decision Support (CogSIMA), February 26-28, 2013, San Diego, CA, USA. Piscataway: Institute of Electrical and Electronics Engineers IEEE, p. 262-268 7 p. (International Multi-Disciplinary Conference on Cognitive Methods in Situation Awareness and Decision Support).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  44. Published

    An approach for OSGi and DPWS interoperability: bridning enterprise application with shop-floor

    Iarovyi, S., Garcia, J. & Martinez Lastra, J. L., 2013, Proceedings 2013 11the IEEE international conference on industrial informatics INDIN, Bochum, Germany, July 29-31, 2013. Piscataway: Institute of Electrical and Electronics Engineers IEEE, p. 200-205 6 p. (IEEE international conference on industrial informatics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  45. Published

    TUT-Microfactory – A small-size, modular and sustainable production system

    Järvenpää, E., Heikkilä, R. & Tuokko, R., 2013, Proceedings of 11th Global Conference on Sustainable Manufacturing GCSM - Innovative Solutions, Berlin, Germany, 23rd-25th September, 2013. Seliger, G. (ed.). Berlin: Technische Universität Berlin, p. 79-84 6 p. (Global Conference on Sustainable Manufacturing).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  46. Published

    Capability-Based Approach for Evaluating the Impact of Product Requirement Changes on the Production System

    Järvenpää, E. & Torvinen, S., 2013, 23rd International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 13, The challenge of sustaining global competitive manufacturing system, 26-28 June 2013 Porto Portugal, Advances in Sustainable and Competitive Manufacturing Systems. Azevedo, A. (ed.). Switzerland: Springer International Publishing, p. 173-185 13 p. (Lecture Notes in Mechanical Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  47. Published

    Multi-objective optimization of electronics heat sink geometries

    Karvinen, R. & Lampio, K., 2013, Proceedings of IWHT2013, 2nd International Workshop on Heat Transfer Advances for Energy Conservation and Pollution Control, October 18-21, 2013, Xi'an, China. p. 1-8 8 p. (International Workshop on Heat Transfer Advances for Energy Conservation and Pollution Control).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  48. Published

    Engineering intelligence - Product-service concepts and requirements in industry

    Lanz, M., Nykänen, O., Aaltonen, J., Ranta, P. A., Koskinen, K. T. & Andersson, P. H., 2013, 2013 IEEE International Symposium on Assembly and Manufacturing (ISAM), July 30th – Aug 2nd 2013, Xi’an, China. Piscataway: Institute of Electrical and Electronics Engineers IEEE, p. 138-141 4 p. (International Symposium on Assembly and Manufacturing).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  49. Published

    Visualization of Information in a Service-Oriented Production Control System

    Lee, N. A. N., Moctezuma, L. E. G. & Lastra, J. L. M., 2013, 39th Annual Conference of the IEEE Industrial Electronics Society, IECON 2013, 10-13 November, 2013, Vienna, Austria. Piscataway, NJ: IEEE, p. 4422-4428 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  50. Published

    Information flows in future advanced manufacturing ecosystems

    Lanz, M., Majuri, M. & Tuokko, R., 2013, IFIP WG 5.7 International conference, APMS 2013, State College, PA, USA, September 9-12, 2013, Advances in Production Management Systems. Sustainable Production and Service Supply Chains. Prabhu, V., Taisch, M. & Kiritsis, D. (eds.). Springer Berlin Heidelberg, p. 70-77 8 p. (IFIP Advances in Information and Communication Technology; vol. 414).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  51. Published

    Information Flows and Design Intent in the Core of Future Product-Services in the Field of Manufacturing Industry

    Lanz, M., Järvenpää, E. & Andersson, P., 2013, 5th International conference on advanced design and manufacture, 25-28 September 2013, Valencia, Spain. Su, D. & Zhu, S. (eds.). Trans Tech Publications, p. 103-106 4 p. (Key Engineering Materials; vol. 572).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Previous 1...3 4 5 6 7 8 9 10 ...29 Next

ID: 22256