Tampere University of Technology

TUTCRIS Research Portal

Department of Mechanical Engineering and Industrial Systems

Research unit: Department

  1. 2012
  2. Published

    Sekalukuformulointi ristikkorakenteiden topologian optimointiin

    Mela, K. & Koski, J., 2012, Proceedings of the 11th Finnish Mechanics Days. XI Suomen Mekaniikkapäivät, Oulun yliopisto 29.-30.11.2012. Hannu, K. & Mikko, M. (eds.). Oulu: Oulun yliopisto, p. 83-88 (Finnish Mechanics Days. Suomen Mekaniikkapäivät).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  3. Published

    State of the art of virtual engineering based human-machine system lifecycle knowledge transfer and management

    Leino, S-P. & Riitahuhta, A., 2012, Proceedings of the 9th International Symposium on Tools and Methods of Competitive Engineering, TMCE 2012, 7-11 May, 2012, Karlsruhe, Germany. Imre, H., Zoltan, R., Albert, A. & Mathias, B. (eds.). Delft, Netherlands: Delft University of Technology, p. 573-585 (International Symposium on Tools and Methods of Competitive Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  4. Published

    Supporting manufacturing companies on utilizing environmental performance metrics

    Nylund, H., Tapaninaho, M., Kirman, B., Koho, M. & Torvinen, S., 2012, The 10th Global Conference on Sustainable Manufacturing, GCSM 2012, 31 October - 2 November, 2012, Istanbul, Turkey. Seliger, G. & Kylyc, S. E. (eds.). GCSM, p. 582-587 (Global Conference on Sustainable Manufacturing).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  5. Published

    Teknillisen mekaniikan verkkosivusto opetuksen apuna

    Mäkelä, A. & Marjamäki, H., 2012, Proceedings of the 11th Finnish Mechanics Days. XI Suomen Mekaniikkapäivät, Oulun yliopisto 29.-30.11.2012. Hannu, K. & Mikko, M. (eds.). Oulu: Oulun yliopisto, p. 203-208 (Finnish Mechanics Days. Suomen Mekaniikkapäivät).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  6. Published

    Testing a framework for analyzing PLM architecture in global manufacturing companies

    Rissanen, N., Pulkkinen, A. & Vainio, V., 2012, The 22nd International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2012, 10-13 June, 2012, Helsinki, Finland. Hasse, N., Satu, K., Ville, T. & Seppo, T. (eds.). Tampere: Tampere University of Technology. Department of Production Engineering, p. 507-514 (International Conference on Flexible Automation and Intelligent Manufacturing).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  7. Published

    The effect of contact edge geometry on fretting fatigue behavior in complete contacts

    Juoksukangas, J., Lehtovaara, A. & Mäntylä, A., 2012, 15th Nordic Symposium on Tribology, NordTrib 2012, 12-15 June 2012, Trondheim Norway. Trondheim: NTNU Norwegian University of Science and Technology, p. 1-6 6 p. (Nordic Symposium on Tribology).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  8. Published

    The effect of microstructure and lead content on the tribological properties of bearing alloys

    Ruusila, V., Nyyssönen, T., Kallio, M., Vuorinen, P., Lehtovaara, A., Valtonen, K. & Kuokkala, V-T., 2012, 15th Nordic Symposium of Tribology, 12 - 15 June 2012 Trondheim, Norway. Trondheim: Nordic Symposium on Tribology; Tribology Lab, Norwegian University of Science and Technology, p. 1-6 6 p. (Nordic Symposium on Tribology).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  9. Published

    Towards adaptive manufacturing systems - knowledge and knowledge management systems

    Lanz, M., Järvenpää, E., Garcia, F., Luostarinen, P. & Tuokko, R., 2012, Manufacturing systems. Faieza, A. A. (ed.). Rijeka, Croatia: InTech, p. 141-158

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  10. Published

    Towards intelligent assembly and manufacturing environment - Modular ICT support for holonic manufacturing system

    Lanz, M., Järvenpää, E., Luostarinen, P., Garcia, F. & Tuokko, R., 2012, Precision assembly technologies and systems. Proceedings of the 6th IFIP WG 5.5 International precision assembly seminar, IPAS 2012, 12-14 February, 2012, Chamonix, France. Svetan, R. (ed.). Springer, p. 154-162 (IFIP Advances in Information and Communication Technology; vol. 371).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  11. Published

    Towards real agility in supply networks - The A-NET vision

    Majuri, M., Perälä, T., Pesonen, J. & Tuokko, R., 2012, The 22nd International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2012, 10-13 June, 2012, Helsinki, Finland. Hasse, N., Satu, K., Ville, T. & Seppo, T. (eds.). Tampere: Tampere University of Technology. Department of Production Engineering, p. 593-600 (International Conference on Flexible Automation and Intelligent Manufacturing).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  12. Published

    Two-step Exact Solution for Modified Mohr-Coulomb Viscoplastic Consistency Model with Linear Hardening/Softening: A Proof with Maple Software

    Saksala, T., 2012, In : American Journal of Computational and Applied Mathematics. 2, 1, p. 41-45

    Research output: Contribution to journalArticleScientificpeer-review

  13. Published

    Two thermodynamically consistent formulations of strain-rate dependent ductile-to-brittle transition model

    Hartikainen, J., Kolari, K., Kouhia, R. & Yaghoubi, S. T., 2012, Proceedings of the 11th Finnish Mechanics Days. XI Suomen Mekaniikkapäivät, Oulun yliopisto 29.-30.11.2012. Hannu, K. & Mikko, M. (eds.). Oulu: Oulun yliopisto, p. 185-190 (Finnish Mechanics Days. Suomen Mekaniikkapäivät).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  14. Published

    Vaikuttavaa tutkimusta tavoitteellisella verkostotoiminnalla, Matine strategia 2018

    Riitahuhta, A. & Appelqvist, P., 2012, Helsinki: Maanpuolustuksen tieteellinen neuvottelukunta MATINE. 25 p.

    Research output: Book/ReportCommissioned reportProfessional

  15. Published

    Väsymislaskenta taajuustasossa

    Lähdesniemi, J. & Mäkinen, J., 2012, In : Rakenteiden mekaniikka. 45, 1, p. 21-33

    Research output: Contribution to journalArticleScientificpeer-review

  16. Published

    Yksinkertainen J2-plastisuus-vauriomalli metalleille

    Saksala, T., 2012, Proceedings of the 11th Finnish Mechanics Days. XI Suomen Mekaniikkapäivät, Oulun yliopisto 29.-30.11.2012. Hannu, K. & Mikko, M. (eds.). Oulu: Oulun yliopisto, p. 177-182 (Finnish Mechanics Days. Suomen Mekaniikkapäivät).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  17. 2011
  18. Published

    A Framework for Building Dimensionless Behavioral Models to Aid in Function-Based Failure Propagation Analysis

    Coatanea, E., Nonsiri, S., Ritola, T., Tumer, I. Y. & Jensen, D. C., Dec 2011, In : Journal of Mechanical Design. 133, 12, 13 p., 121001.

    Research output: Contribution to journalArticleScientificpeer-review

  19. Published

    Activities and corresponding information flows for production system adaption planning

    Järvenpää, E., Lanz, M., Siltala, N. & Tuokko, R., 2011, Proceedings of the 4th International Swedish Production Symposium, SPS11 3-5 May, 2011, Lund, Sweden. Ståhl, J-E. (ed.). Lund: The Swedish Production Academy, p. 124-133 (International Swedish Production Symposium SPS).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  20. Published

    A Framework for developing viable design methodologies for industry

    Lehtonen, T., Juuti, T., Oja, H., Suistoranta, S., Pulkkinen, A. & Riitahuhta, A., 2011, Proceedings of the 18th International Conference on Engineering Design, ICED 11, 15-18 August, 2011, Technical University of Denmark, Copenhagen, Denmark. Culley, S. J., Hicks, B. J., McAloone, T. C., Howard, T. J. & Clarkson, J. (eds.). Glasgow: The Design Society, p. 405-416 (International Conference on Engineering Design ICED; vol. 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  21. Published

    A holistic view on modelling and simulation in the context of an intelligent manufacturing environment

    Nylund, H., Lanz, M., Tuokko, R. & Andersson, P. H., 2011, 21st International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2011, 26-29 June, 2011, Taichung, Taiwan. Taichung: FAIM 2011, p. 801-808 (International Conference on Flexible Automation and Intelligent Manufacturing).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  22. Published

    An approach to service deployment to the service cloud

    Puttonen, J., Lobov, A. & Martinez Lastra, J. L., 2011, GlobeNet 2011, The Sixth International Conference on Systems, ICONS 2011, 23-28 January, 2011, St. Maarten, The Netherlands Antilles. St. Maarten: IARIA, p. 122-127 (International Conference on Systems ICONS GlobeNet).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  23. Published

    An ontology-based semantic foundation for flexible manufacturing systems

    Uddin, K. M., Dvoryanchikova, A., Lobov, A. & Martinez Lastra, J. L., 2011, Proceedings of the 37th IEEE International Conference on Industrial Electronics, IECON 2011, 7-10 November, 2011, Melbourne, Australia. Piscataway, NJ: IEEE, p. 293-311 (IEEE International Conference on Industrial Electronics IECON).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  24. Published

    A novel tool for assessing and improving make-to-order and assemble-to-order production systems

    Koho, M. & Torvinen, S., 2011, Enabling Manufacturing Competitiveness and Economic Sustainability, Proceedings of the 4th International Conference on Changeable, Agile, Reconfigurable and Virtual production CARV2011, Montreal, Canada, 2-5 October 2011. ElMaraghy, H. (ed.). Berlin: Springer, p. 533-538 (International Conference on Changeable, Agile, Reconfigurable and Virtual production CARV).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  25. Published

    Application of the generic modelling method fo system of systems to manufacturing domain

    Zhou, B., Dvoryanchikova, A., Lobov, A., Minor, J. & Martinez Lastra, J. L., 2011, Proceedings of the 37th IEEE International Conference on Industrial Electronics, IECON 2011, 7-10 November, 2011, Melbourne, Australia. Piscataway, NJ: IEEE, p. 305-311 (IEEE International Conference on Industrial Electronics IECON).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  26. Published

    A service-oriented monitoring system of pressurized air in industrial systems for energy awareness

    Rabeko, P., Lobov, A. & Martinez Lastra, J. L., 2011, GlobeNet 2011, The Sixth International Conference on Systems, ICONS 2011, 23-28 January, 2011, St. Maarten, The Netherlands Antilles. St. Maarten: IARIA, p. 150-156 (International Conference on Systems ICONS GlobeNet).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  27. Published

    Assembly line balancing and sequencing

    Uddin, K. M. & Martinez Lastra, J. L., 2011, Assembly Line - Theory and Practice. Grzechca, W. (ed.). Croatia: InTech, p. 13-36

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  28. Published

    A use case analysis method for the implementation of service-oriented solutions for monitoring and diagnostics

    Macchi, M., Fumagalli, L., Garetti, M., Tavola, G., Checcozzo, R., Rusina, F., Vidales Ramos, A., Jokinen, J., Popescu, C., Martinez Lastra, J., Karhumäki, O. & Vainio, M., 2011, Proceedings of the 24th International Congress on Condition Monitoring and Diagnostic Engineering Management, COMADEM 2011, Advances in Industrial Asset Integrity Management, 30 May-1 June 2011, Stavanger, Norway. Singh, M., Rao, R. B. K. N. & Liyanage, J. P. (eds.). Stavanger: COMADEM International, p. 406-413 (International Congress on Condition Monitoring and Diagnostic Engineering Management COMADEM).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  29. Published

    Brownfield process for developing of product families

    Lehtonen, T., Pakkanen, J., Järvenpää, J., Lanz, M. & Tuokko, R., 2011, Proceedings of the 18th International Conference on Engineering Design, ICED 11, 15-18 August, 2011, Technical University of Denmark, Copenhagen, Denmark. Culley, S. J., Hicks, B. J., McAloone, T. C., Howard, T. J. & Clarkson, J. (eds.). Glasgow: The Design Society, p. 248-257 (International Conference on Engineering Design ICED; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  30. Published

    Collapse Simulations of Flexible Multibody Systems

    Mäkinen, J., 2011, Proceedings of the 24th Nordic Seminar on Computational Mechanics. Aalto University publication series. SCIENCE + TECHNOLOGY. Freund, J. & Kouhia, R. (eds.). Espoo: Aalto University, p. 221-222 (Nordic Seminar on Computational Mechanics; vol. 23/2011).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  31. Published

    Considering aspects of lean, agility, and sustainability in digital manufacturing systems

    Nylund, H., Kirman, B., Koho, M., Tapaninaho, M. & Torvinen, S., 2011, Proceedings of the International Conference on Agile Manufacturing systems, ICAM 2011, Systems approach for enhancing agility of organizations and processes, 18-20 December, 2011, Dayalbagh Educational Institute, Agra, India. Hans Raj, K., Verma, A. K., Dwivedi, S. N., Patvardhan, C., Mishra, D. S. & Sharma, R. S. (eds.). Agra: ICAM 2011, p. 580-586 (International Conference on Agile Manufacturing systems ICAM).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  32. Published

    Continuous Models of Elastic Roll on Various Supports

    Jokinen, K. & Keskinen, E., 2011, 13th World Congress in Mechanism and Machine Science, Guanajuato, Mexico, 19-25 June, 2011. Guanajuato: Universidad de Guanajuato, p. 1-9 9 p. IMD-123. (World Congress in Mechanism and Machine Science).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  33. Published

    CSM-Hotel - A new manufacturing concept for small and medium enterprises

    Nylund, H., Toivonen, V., Salminen, K. & Tuokko, R., 2011, 44th CIRP Conference on Manufacturing systems, May 31-June 3, 2011, Madison, WI, USA. Madison, WI: The International Academy for Production Engineering CIRP, p. 1-7 7 p. (CIRP Conference on Manufacturing Systems).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  34. Published

    Current state and future expectations of sustainable development and sustainable production in the Finnish manufacturing industry

    Tapaninaho, M., Koho, M. & Torvinen, S., 2011, Proceedings of the 9th Global Conference on Sustainable Manufacturing in St. Petersburg, 28-30 September, 2011, Saint Petersburg, Russia. Seliger, G. (ed.). Berlin: Technische Universität Berlin, p. 302-307 (Global Conference on Sustainable Manufacturing).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  35. Published

    Damping of oscillatory rolling contact by piezoelectric actuators

    Töhönen, M., Keskinen, E. & Seemann, W., 2011, ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE2011, November 11-17, 2011, Denver, Colorado, USA. New York, NY: ASME, p. 1-8 8 p. (ASME International Mechanical Engineering Congress and Exposition IMECE2011).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  36. Published

    Data aggregation at field device level for industrial ambient monitoring using web services

    Nieto Lee, A. & Martinez Lastra, J. L., 2011, IEEE 9th International Conference on Industrial Informatics, INDIN 2011, 26-29 July, 2011, Caparica, Lisbon, Portugal. Piscataway, NJ: IEEE, p. 491-496 (International Conference on Industrial Informatics INDIN).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  37. Published

    Decentralized production planning and control in a collaborative SME network

    Toivonen, V., Väistö, V., Perälä, T. & Tuokko, R., 2011, 21st International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2011, 26-29 June, 2011, Taichung, Taiwan. Taichung: FAIM 2011, p. 621-629 (International Conference on Flexible Automation and Intelligent Manufacturing).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  38. Published

    Design of a portable motion platform using pneumatic muscle actuators

    Jouppila, V., Itäsalo, A-V., Kuosa, J. & Ellman, A., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Sairala, H. & Koskinen, K. T. (eds.). Tampere: Scandinavian International Conference on Fluid Power, p. 1-15 15 p. (Scandinavian International Conference on Fluid Power SICFP).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  39. Published

    Development of intelligent gripper systems for microfactories

    Heikkilä, R., Prusi, T., Ha, T. H., Song, J. Y., Lee, C. W. & Tuokko, R., 2011, 7th International Workshop on Micromanufacturing Technology, IWMT 2011, 18 August, 2011, Jeju-do, Korea. Jeju-do: IWMT 2011, p. 26-28 (International Workshop on Micromanufacturing Technology IWMT).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  40. Published

    Diagnosis of multi-descriptor condition monitoring data

    Lumme, V., 2011, 2011 IEEE Conference on Prognostics and Health Management PHM, 20.-23.6.2011, Denver, CO, USA. Piscataway, NJ: IEEE, p. 1-10 10 p. 6024327. (IEEE Conference on Prognostics and Health Management PHM).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  41. Published

    Dynamic operation environment - towards intelligent adaptive production systems

    Järvenpää, E., Luostarinen, P., Lanz, M., Garcia, F. & Tuokko, R., 2011, IEEE International Symposium on Assembly and Manufacturing, ISAM 2011, 25-27 May, 2011, Tampere Hall, Tampere, Finland. Piscataway, NJ: IEEE, p. 1-6 6 p. (IEEE International Symposium on Assembly and Manufacturing ISAM).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  42. Published

    Dynamics of Stress Wave Propagation during Percussive Drilling Process

    Keskinen, E., Karvinen, T., Montonen, J. & Heinonen, M., 2011, 13th World Congress in Mechanism and Machine Science, Guanajuato, Mexico, 19-25 June, 2011. Guanajuato: Universidad de Guanajuato, p. 1-5 5 p. (World Congress in Mechanism and Machine Science).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  43. Published

    Effect of start-up schemes and amplitude of tangential motion on friction behavior in fretting point contact

    Hintikka, J., Lehtovaara, A. & Lönnqvist, C., 2011, In : Tribology International. 44, 11, p. 1535-1543

    Research output: Contribution to journalArticleScientificpeer-review

  44. Published

    Effect of the Immersion Level of a Virtual Loader Simulator on the Sense of Presence

    Kuusisto, J., Ellman, A., Kaapu, T. & Tiainen, T., 2011, ASME 2011 World Conference on Innovative Virtual Reality WINVR2011, June 27-29, 2011, Milan, Italy. New York, NY: ASME, (ASME World Conference on Innovative Virtual RealityWINVR).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  45. Published

    Effects of team role assessment in problem based group work learning

    Vanhatalo, M., Lehtonen, T., Hälikkä, A., Pakkanen, J. & Juuti, T., 2011, Design education for creativity and business innovation, proceedings of the 13th International Conference on Engineering and product design education, E&PDE 2011, 8-9 September, 2011, City University of London, UK. Kovacevic, A., Ion, W., McMahon, C., Buck, L. & Hogarth, P. (eds.). London: City University, p. 193-198 (International Conference on Engineering and Product Design Education E&PDE).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  46. Published

    Elastodynamic Response of Thin Circular Cylindrical Shells to Grinding Loads

    Dospel, V., 2011, Tampere: Tampere University of Technology. (Tampereen teknillinen yliopisto. Julkaisu; vol. 1014)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  47. Published

    Embedded service oriented monitoring, diagnostics and control: towards the asset-aware and self-recovery factory

    Vidales Ramos, A., Delamer, I. M. & Martinez Lastra, J. L., 2011, IEEE 9th International Conference on Industrial Informatics, INDIN 2011, 26-29 July, 2011, Caparica, Lisbon, Portugal. Piscataway, NJ: IEEE, p. 497-502 (International Conference on Industrial Informatics INDIN).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  48. Published

    Energy efficiency improvement through context sensitive self-learning of machine availability

    Bittencourt, J. L., Bonefeld, R., Scholze, S., Stokic, G., Uddin, M. K. & Martinez Lastra, J. L., 2011, IEEE 9th International Conference on Industrial Informatics, INDIN 2011, 26-29 July, 2011, Caparica, Lisbon, Portugal. Piscataway, NJ: IEEE, p. 93-98 (International Conference on Industrial Informatics INDIN).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  49. Published

    Evolvable micro production systems: specific needs and differences to macro

    Hofmann, A., Bretthauer, G., Siltala, N. & Tuokko, R., 2011, IEEE International Symposium on Assembly and Manufacturing, ISAM 2011, 25-27 May, 2011, Tampere Hall, Tampere, Finland. Piscataway, NJ: IEEE, p. 1-6 6 p. (IEEE International Symposium on Assembly and Manufacturing ISAM).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  50. Published

    Finnish manufacturing companies' views on sustainable development and sustainable manufacturing

    Koho, M., Kuusela, J. & Tapaninaho, M., 2011, Tampere Manufacturing Summit, Lean and Sustainable, 23-25 May, 2011, Tampere Hall, Tampere, Finland. Tampere: Tampere Manufacturing Summit, (Tampere Manufacturing Summit, Lean and Sustainable).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  51. Published

    Finnish manufacturing companies' views on sustainable development and sustainable production

    Koho, M., Kuusela, J., Tapaninaho, M. & Torvinen, S., 2011, Proceedings of the 4th International Swedish Production Symposium, SPS11 3-5 May, 2011, Lund, Sweden. Ståhl, J-E. (ed.). Lund: The Swedish Production Academy, p. 407-413 (International Swedish Production Symposium SPS).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  52. Published

    Formalising connections between products, processes and resources - towards semantic knowledge management system

    Lanz, M., Järvenpää, E., Luostarinen, P., Tenhunen, A., Tuokko, R. & Rodriguez, R., 2011, Proceedings of the 4th International Swedish Production Symposium, SPS11 3-5 May, 2011, Lund, Sweden. Ståhl, J-E. (ed.). Lund: The Swedish Production Academy, p. 425-431 (International Swedish Production Symposium SPS).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Previous 1...5 6 7 8 9 10 11 12 ...29 Next

ID: 22256