Tampere University of Technology

TUTCRIS Research Portal

Department of Mechanical Engineering and Industrial Systems

Research unit: Department

  1. 2011
  2. Published

    Framework for distributed manufacturing systems

    Nylund, H., Salminen, K. & Andersson, P. H., 2011, Enabling Manufacturing Competitiveness and Economic Sustainability, Proceedings of the 4th International Conference on Changeable, Agile, Reconfigurable and Virtual production CARV2011, Montreal, Canada, 2-5 October 2011. ElMaraghy, H. (ed.). Berlin: Springer, p. 172-177 (International Conference on Changeable, Agile, Reconfigurable and Virtual production CARV).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  3. Published

    Framework for extended digital manufacturing systems

    Nylund, H. & Andersson, P. H., 2011, In : International Journal of Computer Integrated Manufacturing. 24, 5, p. 446-456

    Research output: Contribution to journalArticleScientificpeer-review

  4. Published

    Hydrodynamic added mass and damping of the Kaplan turbine

    Keto-Tokoi, J. M., Matusiak, J. E. & Keskinen, E. K., 2011, ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE2011, November 11-17, 2011, Denver, Colorado, USA. New York, NY: ASME, p. 1-13 13 p. (ASME International Mechanical Engineering Congress and Exposition IMECE2011).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  5. Published

    Impact Modeling by Manifold Approach in Explicit Transient Dynamics

    Saksala, T. & Mäkinen, J., 2011, COMPDYN 2011, 3rd International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, 25-28 May 2011, Corfu, Greece. Corfu: COMPDYN, p. 1-13 13 p. (International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering COMPDYN).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  6. Published

    Integrated product/process system for next generation manufacturing

    Salminen, K., 2011, Tampere Manufacturing Summit 2011, Lean and Sustainable, 23-25 May, 2011, Tampere Hall, Tampere, Finland. Tampere: Tampere Manufacturing Summit, (Tampere Manufacturing Summit, Lean and Sustainable).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  7. Published

    Introduction of a comperitive and sustainable research environment

    Ranta, A., Ikkala, K., Nylund, H. & Andersson, P. H., 2011, IEEE International Symposium on Assembly and Manufacturing, ISAM 2011, 25-27 May, 2011, Tampere Hall, Tampere, Finland. Piscataway, NJ: IEEE, p. 1-5 5 p. (IEEE International Symposium on Assembly and Manufacturing ISAM).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  8. Published

    Is what you see really what you get? - Case study of virtual prototyping in designing the production process

    Becker, I. & Toivonen, V., 2011, 22nd Symposium on Design for X, 11-12 October, 2011, Tutzing, Germany. Glasgow: The Design Society, p. 253-264 (Symposium on Design for X).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  9. Published

    Julkisten rakennusten energiatehokkuuden parantaminen

    Kalema, T., Rintamäki, J., Sahakari, T., Mäkitalo, E., Harju-Säntti, E., Heikkilä, H. & Suomalainen, T., 2011, Tampere: Tampereen teknillinen yliopisto. (Tampereen teknillinen yliopisto. Konstruktiotekniikan laitos. Tutkimusraportti; vol. 3)

    Research output: Book/ReportCommissioned reportProfessional

  10. Published

    Koneiden vikaantumismekanismit

    Miettinen, J., 2011, Kuntoon perustuva kunnossapito ja kunnonvalvonta, 23.-24.11.2011, Tampere. Kunnossapitoyhdistys ProMaint, p. 1-13 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  11. Published

    Linja-autoliikennöitsijät ja tavaralinjaliikenne

    Lehtonen, T., 2011, Yölinjalla. Levä, K. (ed.). Mobilia, p. 58-65

    Research output: Chapter in Book/Report/Conference proceedingChapterProfessional

  12. Published

    Low temperature nanoparticle sintering with continuous wave and pulse lasers

    Kumpulainen, T., Pekkanen, J., Valkama, J., Laakso, J., Tuokko, R. & Mäntysalo, M., 2011, In : Optics and laser technology. 43, 3, p. 570-576

    Research output: Contribution to journalArticleScientificpeer-review

  13. Published

    Major achievements and future visions in the Finnish micro and desktop factory research

    Tuokko, R. & Nurmi, A., 2011, Proceedings of the 8th International Conference on Multi-Material Micro Manufacture, 4M 2011, 8-10 November, 2011, Suttgart, Germany. Kück, H., Reinecke, H. & Dimov, S. (eds.). Singapore: Research Publishing, p. 16-26 (International Conference on Multi-Material Micro Manufacture).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  14. Published

    Mikro- ja Desktop-tuotantojärjestelmät

    Heikkilä, R., Vuola, A., Prusi, T., Siltala, N. & Tuokko, R., 2011, Automaatio XIX Seminaari, 15-16.3.2011, Helsinki. SAS julkaisusarja. Visala, A. (ed.). Helsinki: Suomen Automaatioseura, p. 1-6 6 p. (Automaatio Seminaari; vol. 41).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  15. Published

    Modeling system of systems: a generic method based on system characteristics and interface

    Zhou, B., Dvoryanchikova, A., Lobov, A. & Martinez Lastra, J. L., 2011, IEEE 9th International Conference on Industrial Informatics, INDIN 2011, 26-29 July, 2011, Caparica, Lisbon, Portugal. Piscataway, NJ: IEEE, p. 361-368 (International Conference on Industrial Informatics INDIN).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  16. Published

    Modelling and analysis of fretting wear in rough point contacts in partial slip conditions

    Lehtovaara, A. & Lönnqvist, C., 2011, In : Proceedings of the institution of Mechanical Engineers Part J: Journal of Engineering Tribology. 225, 10, p. 986-998

    Research output: Contribution to journalArticleScientificpeer-review

  17. Published

    Modelling and evaluation of the fretting fatigue cracking risk in smooth spherical contacts

    Lehtovaara, A., Rabb, R. & Pasanen, A., 2011, In : Tribology International. 44, 11, p. 1526-1534

    Research output: Contribution to journalArticleScientificpeer-review

  18. Published

    Modular microfactory system for gas sensor assembly

    Siltala, N., Prusi, T., Vuola, A., Heikkilä, R. & Tuokko, R., 2011, IEEE International Symposium on Assembly and Manufacturing, ISAM 2011, 25-27 May, 2011, Tampere Hall, Tampere, Finland. Piscataway, NJ: IEEE, p. 1-6 6 p. (IEEE International Symposium on Assembly and Manufacturing ISAM).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  19. Published

    Multicriterion Compliance Minimization and Stress-constrained Minimum Weight Design of a Three-bar Truss

    Mela, K., 2011, Tampere University of Technology. 40 p. (Tampere University of Technology, Department of Mechanics and Design. Research Report; vol. 2)

    Research output: Book/ReportCommissioned reportProfessional

  20. Published

    Numerical modelling of bit-rock fracture mechanisms in percussive drilling with a continuum approach

    Saksala, T., 2011, In : International Journal for Numerical and Analytical Methods in Geomechanics. 35, 13, p. 1483-1505

    Research output: Contribution to journalArticleScientificpeer-review

  21. Published

    Numerical Simulation of Dynamic Brazilian Disc Test on Rock

    Saksala, T., Hokka, M., Kuokkala, V-T. & Mäkinen, J., 2011, Proceedings of the 24th Nordic Seminar on Computational Mechanics, Aalto University publication series. SCIENCE + TECHNOLOGY. Freund, J. & Kouhia, R. (eds.). Espoo: Aalto University, p. 154-157 (Nordic Seminar on Computational Mechanics; vol. 23/2011).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  22. Published

    Objektives, enablers and challenges of sustainable development and sustainable manufacturing

    Koho, M., Torvinen, S. & Torres Romiguer, A., 2011, IEEE International Symposium on Assembly and Manufacturing, ISAM 2011, 25-27 May, 2011, Tampere Hall, Tampere, Finland. Piscataway, NJ: IEEE, p. 1-6 6 p. (IEEE International Symposium on Assembly and Manufacturing ISAM).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  23. Published

    On Three Competing Maintenance Actions and the Related Condition Control

    Hagmark, P-E., 2011, In : International Journal of Quality, Statistics, and Reliability. 2011, p. 1-6 6 p., 637079.

    Research output: Contribution to journalArticleScientificpeer-review

  24. Published

    OPC-UA and DPWS interoperability for factory floor monitoring using complex event processing

    Garcia, I. M. J. A., Lobov, A. & Martinez Lastra, J. L., 2011, IEEE 9th International Conference on Industrial Informatics, INDIN 2011, 26-29 July, 2011, Caparica, Lisbon, Portugal. Piscataway, NJ: IEEE, p. 205-211 (International Conference on Industrial Informatics INDIN).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  25. Published

    Open Product Development

    Riitahuhta, A., Lehtonen, T., Pulkkinen, A. & Huhtala, P., 2011, The future of design methodology. Birkhofer, H. (ed.). London: Springer, p. 135-146

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  26. Published

    Optimal design of stiffened plate using metamodeling techniques

    Heinonen, O. & Pajunen, S., 2011, In : Rakenteiden mekaniikka. 44, 3, p. 218-230

    Research output: Contribution to journalArticleScientificpeer-review

  27. Published

    Parhaat tuottavat - Valmistavan teknologiateollisuuden tutkimusagenda 2020

    Heilala, J. (ed.), Majuri, M. (ed.), Sääski, J. (ed.), Pesonen, J. (ed.), Halme, J. (ed.), Hyötyläinen, R. (ed.), Hentula, M. (ed.), Paro, J. (ed.) & Tuokko, R. (ed.), 2011, Helsinki: Tekes, VTT, TTY, Teknologiateollisuus ry.

    Research output: Book/ReportAnthologyScientificpeer-review

  28. Published

    Position control fo PWM-actuated pneumatic musckle actuator system

    Jouppila, V. & Ellman, A., 2011, ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE2011, November 11-17, 2011, Denver, Colorado, USA. New York, NY: ASME, (ASME International Mechanical Engineering Congress and Exposition IMECE2011).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  29. Published

    Presenting capabilities of resources and resource combinations to support production system adaptation

    Järvenpää, E., Luostarinen, P., Lanz, M. & Tuokko, R., 2011, IEEE International Symposium on Assembly and Manufacturing, ISAM 2011, 25-27 May, 2011, Tampere Hall, Tampere, Finland. Piscataway, NJ: IEEE, p. 1-6 6 p. (IEEE International Symposium on Assembly and Manufacturing ISAM).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  30. Published

    Process planning based on feature recognition method

    Garcia, F., Lanz, M., Järvenpää, E. & Tuokko, R., 2011, IEEE International Symposium on Assembly and Manufacturing, ISAM 2011, 25-27 May, 2011, Tampere Hall, Tampere, Finland. Piscataway, NJ: IEEE, p. 1-6 6 p. (IEEE International Symposium on Assembly and Manufacturing ISAM).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  31. Published

    Pula-ajan bussit 1945-1956: Vuosien 1945-1956 uudet linja-autot

    Rajasalo, J., Lehtonen, T. & Laitinen, H., 2011, Tampere: Suomen Linja-autohistoriallinen Seura ry.

    Research output: Book/ReportBookProfessional

  32. Published

    Rakennusten energiamääräykset 2012 - esimerkkilaskelmia pientaloille: E-lukuvaatimusten täyttyminen

    Suomalainen, T. & Kalema, T., 2011, Tampere: Tampereen teknillinen yliopisto. Konstruktiotekniikan laitos. 26 p.

    Research output: Book/ReportCommissioned reportProfessional

  33. Published

    Rakennusten energiatehokkuus uusien rakentamismääräysten mukaan

    Kalema, T., 2011, In : Lasirakentaja. 21, 3, p. 4-6

    Research output: Contribution to journalArticleProfessional

  34. Published

    Remote energy monitoring unit design and implementation

    Zhang, B., Popescu, C., Lobov, A. & Martinez Lastra, J. L., 2011, Proceedings of the 37th IEEE International Conference on Industrial Electronics, IECON 2011, 7-10 November, 2011, Melbourne, Australia. Piscataway, NJ: IEEE, p. 3125-3130 (IEEE International Conference on Industrial Electronics IECON).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  35. Published

    Requirement considerations for ubiquitous integration of cooperation objects

    Karnouskos, S., Villasenor Herrera, V., Haroon, M., Handte, M. & Marron, P. J., 2011, 4th IFIP International Conference on New Technologies, Mobility and Security, NTMS 2011, 7-10 February, 2011, Paris, France. Piscataway, NJ: IEEE, p. 1-5 5 p. (IFIP International Conference on New Technologies, Mobility and Security NTMS).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  36. Published

    Researching PLM process in industry - Case of benchmarking ECM

    Pulkkinen, A., Markova, T. & Rissanen, N., 2011, The 8th International Conference on Product Lifecycle Management, PLM11, 11-13 July, 2011, Technische Universiteit Eindhoven, The Netherlands. Eindhoven: IFIP, p. 1-10 10 p. (International Conference on Product Lifecycle Management PLM).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  37. Published

    Scanner test pattern for evaluation of beam manipulation accuracy

    Kumpulainen, T., Latokartano, J., Vihinen, J. & Tuokko, R., 2011, IEEE International Symposium on Assembly and Manufacturing, ISAM 2011, 25-27 May, 2011, Tampere Hall, Tampere, Finland. Piscataway, NJ: IEEE, p. 1-6 6 p. (IEEE International Symposium on Assembly and Manufacturing ISAM).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  38. Published

    Service oriented computing to self-learning production system

    Uddin, K. M., Dvoryanchikova, A., Martinez Lastra, J. L., Scholze, S., Stokic, D., Candido, G. & Barata, J., 2011, Proceedings of IEEE 9th International Conference on Industrial Informatics, INDIN 2011, 26-29 July, 2011, Caparica, Lisbon, Portugal. Piscataway, NJ: IEEE, p. 212-217 (IEEE International Conference on Industrial Informatics INDIN).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  39. Published

    Studying Users and Virtual Prototyping in Machine Design

    Kaapu, T., Ellman, A. & Tiainen, T., 2011, Proceedings of IRIS 2011 Conference, 16.-19.8.2011, Turku, Finland. TUCS Lecture Notes. Leino, T. (ed.). Turku: TURKU CENTRE FOR COMPUTER SCIENCE, p. 358-369 (IRIS Conference; vol. 15).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  40. Published

    Support-condition analyses of rotating beams under distributed imbalance loading

    Jokinen, K., Keskinen, E., Jorkama, M. & Seemann, W., 2011, ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE2011, November 11-17, 2011, Denver, Colorado, USA. New York, NY: ASME, p. 325-334 (ASME International Mechanical Engineering Congress and Exposition IMECE2011).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  41. Published

    Sustainable manufacturing and eco-factories within sustainable industrial areas within fast growing eco-cities

    Leino, T., Salminen, K. & Joutsiniemi, A., 2011, 21st International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2011, 26-29 June, 2011, Taichung, Taiwan. Taichung: FAIM 2011, p. 747-754 (International Conference on Flexible Automation and Intelligent Manufacturing).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  42. Published

    Systeemiteoreettiset mallit liiketoiminnan kehittämisen tukena

    Huttunen, P. & Laurikkala, H., 2011, Automaatio XIX Seminaari, 15-16.3.2011, Helsinki. SAS julkaisusarja. Visala, A. (ed.). Helsinki: Suomen Automaatioseura, p. 1-6 6 p. (Automaatio Seminaari; vol. 41).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  43. Published

    The Effects of Laser Welding on the Heterogeneous Immunoassay Performance in a Microfluidic Cartridge

    Mäntymaa, A., Halme, J., Välimaa, L. & Kallio, P., 2011, In : Biomicrofluidics. 5, 4, p. 1-11 11 p., 046504.

    Research output: Contribution to journalArticleScientificpeer-review

  44. Published

    Thermoelastic response of thin-walled cylindrical shell under the effect of moving point load and heas source

    Keskinen, E., Karvinen, T., Dospel, V. & Cotsaftis, M., 2011, ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE2011, November 11-17, 2011, Denver, Colorado, USA. New York, NY: ASME, p. 1-10 10 p. (ASME International Mechanical Engineering Congress and Exposition IMECE2011).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  45. Published

    Thin-shell response to machining loads

    Dospel, V. & Keskinen, E., 2011, ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE2011, November 11-17, 2011, Denver, Colorado, USA. New York, NY: ASME, p. 1-10 10 p. (ASME International Mechanical Engineering Congress and Exposition IMECE2011).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  46. Published

    Three Frames for Studying Users in Virtual Environments: Case of Simulated Mobile Machines

    Tiainen, T., Ellman, A. & Kaapu, T., 2011, 15th IEEE/ACM Symposium on Distributed Simulations and Real Time Applications DS-RT 2011, Media City - Salford Quays, 4-7 September 2011. Roberts, D., Pullen, M., Theodoropoulos, G. & Avis, N. (eds.). Piscataway, NJ: IEEE, p. 115-119 (IEEE/ACM Symposium on Distributed Simulations and Real Time Applications DS-RT).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  47. Published

    Towards sustainable development and sustainable production in Finnish manufacturing industry

    Koho, M., Tapaninaho, M. & Torvinen, S., 2011, Enabling Manufacturing Competitiveness and Economic Sustainability, Proceedings of the 4th International Conference on Changeable, Agile, Reconfigurable and Virtual production CARV2011, Montreal, Canada, 2-5 October 2011. ElMaraghy, H. (ed.). Berlin: Springer, p. 422-427 (International Conference on Changeable, Agile, Reconfigurable and Virtual production CARV).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  48. Published

    Two-step Exact Solution for Mohr-Coulomb Viscoplastic Consistency Model with Linear Hardening/Softening: A Proof with Maple Software

    Saksala, T., 2011, In : American Journal of Computational and Applied Mathematics. 1, 1, p. 1-3 3 p.

    Research output: Contribution to journalArticleScientificpeer-review

  49. Published

    Ubiquitous Integration of Cooperating Objects

    Karnouskos, S., Villasenor, V., Handte, M. & Marron, P. J., 2011, In : International Journal of Next-Generation Computing. 2, 3, p. 1-19 19 p.

    Research output: Contribution to journalArticleScientificpeer-review

  50. Published

    Urban Eco-Factory compatibility of residential and industrial zones

    Leino, T., Salminen, K. & Joutsiniemi, A., 2011, The 6th International Conference on Industrial Ecology, ISIE 2011, 7-10 June, 2011, University of California, Berkeley, USA. Berkeley, CA: International Society for Industrial Ecology, p. 1-9 9 p. (International Conference on Industrial Ecology ISIE).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  51. Published

    Using virtual reality in designing the assembly process of a car

    Becker, I., Toivonen, V. & Leino, S-P., 2011, Proceedings of the 18th International Conference on Engineering Design, ICED 11, 15-18 August, 2011, Technical University of Denmark, Copenhagen, Denmark. Culley, S. J., Hicks, B. J., McAloone, T. C., Howard, T. J. & Clarkson, J. (eds.). Glasgow: The Design Society, p. 91-100 (International Conference on Engineering Design ICED; vol. 9).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Previous 1...6 7 8 9 10 11 12 13 ...29 Next

ID: 22256