Tampere University of Technology

TUTCRIS Research Portal

Research group: Mobile manipulation

Research unit: Research Group

  1. Published

    Adaptive and nonlinear control of discharge pressure for variable displacement axial piston pumps

    Koivumäki, J. & Mattila, J., 1 Oct 2017, In : Journal of Dynamic Systems, Measurement and Control: Transactions of the ASME. 139, 10, 101008.

    Research output: Contribution to journalArticleScientificpeer-review

  2. Published

    Adaptive Backlash Inverse Augmented Virtual Decomposition Control of a Hydraulic Manipulator

    Adeleke, A. & Mattila, J., 20 Nov 2017, IEEE International Conference on Cybernetics and Intelligent Systems, and Robotics, Automation and Mechatronics. IEEE, p. 322-327 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  3. Published

    A generic method to optimize a redundant serial robotic manipulator's structure

    Kivelä, T., Mattila, J. & Puura, J., 1 Sep 2017, In : Automation in Construction. 81, p. 172-179 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  4. Published

    A Multistage Controller with Smooth Switching for Autonomous Pallet Picking

    M. Aref, M., Ghabcheloo, R., Kolu, A. & Mattila, J., 19 May 2016, IEEE International Conference on Robotics and Automation. Stockholm, Sweden: IEEE, p. 2535-2542 8 p. 2382

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  5. Published

    A time-optimal bounded velocity path-following controller for generic Wheeled Mobile Robots

    Oftadeh, R., Ghabcheloo, R. & Mattila, J., 29 Jun 2015, 2015 IEEE International Conference on Robotics and Automation (ICRA), 26-30 May 2015, Seattle, WA. Institute of Electrical and Electronics Engineers IEEE, p. 676-683 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  6. Published

    Digital Hydraulic Power Management System - Measured Characteristics of a Second Prototype

    Heikkilä, M., Tammisto, J., Linjama, M. & Huhtala, K., May 2016, Proceedings of the Eighth Workshop on Digital Fluid Power (DFP16) . Uusi-Heikkilä, J. & Linjama, M. (eds.). p. 69-81 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  7. Published

    Fault tolerant control architecture design for mobile manipulation in scientific facilities

    M. Aref, M., Oftadeh, R., Ghabcheloo, R. & Mattila, J., 29 Jan 2015, In : international Journal of Advanced Robotic Systems. 12, 4

    Research output: Contribution to journalArticleScientificpeer-review

  8. Published

    Finite Element-Based Control of a Single-Link Flexible Hydraulic Manipulator

    Mäkinen, P. & Mattila, J., Oct 2017, ASME/BATH 2017 Symposium on Fluid Power and Motion Control. ASME, 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  9. Published

    Geometrical workspace analysis of a cable-driven redundant parallel manipulator: KNTU CDRPM

    Mohammadi Aref, M. & Taghirad, H., 22 Sep 2008, IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS. . Nice: Institute of Electrical and Electronics Engineers IEEE, p. 1958-1963 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  10. Published

    Geometry-Aided Inversion of Manipulator Telescopic Link Length from MEMS Accelerometer and Rate Gyro Readings

    Vihonen, J., Honkakorpi, J., Mattila, J. & Visa, A., 2014, 2014 IEEE International Conference on Robotics & Automation (ICRA) Hong Kong Convention and Exhibition Center, May 31 - June 7, 2014. Hong Kong, China. Institute of Electrical and Electronics Engineers IEEE, p. 181-186 6 p. (IEEE International Conference on Robotics & Automation (ICRA)).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  11. Published

    Global Energy-Optimal Redundancy Resolution of Hydraulic Manipulators: Experimental Results for a Forestry Manipulator

    Nurmi, J. & Mattila, J., 6 May 2017, In : Energies. 10, 5, 31 p., 647.

    Research output: Contribution to journalArticleScientificpeer-review

  12. Published

    Global energy-optimised redundancy resolution in hydraulic manipulators using dynamic programming

    Nurmi, J. & Mattila, J., Jan 2017, In : Automation in Construction. 73, January 2017, p. 120-134 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  13. Published

    Guest editorial introduction to the focused section on design and control of hydraulic robots

    Mattila, J., Semini, C., Moon, H., Buchli, J., Hyon, S., Li, P. Y. & Yao, B., 1 Apr 2017, In : IEEE - ASME Transactions on Mechatronics. 22, 2, p. 585-588 4 p.

    Research output: Contribution to journalEditorialScientific

  14. Published

    High performance nonlinear motion/force controller design for redundant hydraulic construction crane automation

    Koivumäki, J. & Mattila, J., 1 Mar 2015, In : Automation in Construction. 51, p. 59-77 19 p.

    Research output: Contribution to journalArticleScientificpeer-review

  15. Published

    Inertial Sensor-Based State Estimation of Long-Reach Flexible-Link Manipulators

    Mäkinen, P. & Mattila, J., 2018, 2017 IEEE 8th International Conference on Cybernetics and Intelligent Systems (CIS) and IEEE Conference on Robotics, Automation and Mechatronics (RAM). IEEE, 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  16. Published

    Joint angle estimation for floating base robots utilizing MEMS IMUs

    Zhang, X., Peltola, E. & Mattila, J., 2017, 8th IEEE International Conference on Cybernetics and Intelligent Systems (CIS), Robotics, Automation and Mechatronics (RAM). China: IEEE, p. 282-287 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  17. Published

    Joint-Space Kinematic Model for Gravity-Referenced Joint Angle Estimation of Heavy-Duty Manipulators

    Vihonen, J., Mattila, J. & Visa, A., 2017, In : IEEE Transactions on Instrumentation and Measurement. 66, 12, p. 3280-3288

    Research output: Contribution to journalArticleScientificpeer-review

  18. Published

    Linear accelerometers and rate gyros for rotary joint angle estimation of heavy-duty mobile manipulators using forward kinematic modeling

    Vihonen, J., Honkakorpi, J., Tuominen, J., Mattila, J. & Visa, A., 1 Jun 2016, In : IEEE - ASME Transactions on Mechatronics. 21, 3, p. 1765-1774 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  19. Published

    Modeling and Preliminary Design of Underwater Robot for Inspection

    Zavari, S., Salomaa, T., Koskinen, K., Villa Escusol, J. & Aaltonen, J., 2016, Proceedings of the 2nd Annual SMACC Research Seminar 2017. Tampere: Tampere University of Technology, p. 81-84 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  20. Published

    Nonlinear Full-Model-Based Controller for Unactuated Joints in Vertical Plane

    Mustalahti, P. & Mattila, J., 2017, 8th IEEE International Conference on Cybernetics and Intelligent Systems (CIS), Robotics, Automation and Mechatronics (RAM). IEEE, p. 201-206 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  21. Published

    Novel pairwise coupled kinematic solution for algebraic angular acceleration estimation of serial link manipulators

    Vihonen, J., Honkakorpi, J., Mattila, J. & Visa, A., 29 Jun 2015, 2015 IEEE International Conference on Robotics and Automation (ICRA). Institute of Electrical and Electronics Engineers IEEE, p. 809-814 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  22. Published

    Object detection in robotic applications for real-time localization using semi-unknown objects

    Astola, P., Aref, M. M., Vihonen, J., Mattila, J. & Tabus, I., 1 Jul 2017, International Conference on Telecommunications and Signal Processing (TSP). IEEE, p. 682-687 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  23. Published

    On Design and Development of Super-FRS main tunnel Remote Handling System Concept

    Amjad, F., Weick, H., Mattila, J., Kozlova, E. & Schloer, C., 2014, 2014 IEEE 17th International Conference on Intelligent Transportation Systems (ITSC), 8-11 Oct. 2014, Qingdao. IEEE, p. 188-194 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  24. Published

    On Increasing the Automation Level of Heavy-Duty Hydraulic Manipulators with Condition Monitoring of the Hydraulic System and Energy-Optimised Redundancy Resolution

    Nurmi, J., 30 Jun 2017, Tampere University of Technology. 59 p. (Tampere University of Technology. Publication; vol. 1481)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  25. Published

    On-line Path Planning with Collision Avoidance for Coordinate-Controlled Robotic Manipulators

    Kivelä, T., Mattila, J., Puura, J. & Launis, S., 2017, ASME/Bath 2017 Fluid Power and Motion Control, FPMC2017. ASME, 10 p. FPMC2017-4297

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  26. Published

    Precise Outline Matching Criteria for Target Pose Estimation and Odometry from Stereo Video

    Astola, P., Helin, P., Aref, M., Mattila, J., Astola, J. & Tabus, I., 2016, International Conference on Telecommunications and Signal Processing (TSP). IEEE, p. 724-730

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  27. Published

    Real-time Distance Query and Collision Avoidance for Point Clouds with Heavy-duty Redundant Manipulator

    Kivelä, T., Mustalahti, P. & Mattila, J., 2017, 8th IEEE International Conference on Cybernetics and Intelligent Systems (CIS), Robotics, Automation and Mechatronics (RAM). IEEE, p. 272-277 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  28. Published

    Real-Time Vision-Based Navigation for Nonholonomic Mobile Robots

    M. Aref, M., Oftadeh, R., Ghabcheloo, R. & Mattila, J., 17 Nov 2016, 2016 IEEE International Conference on Automation Science and Engineering (CASE). IEEE, 8 p. (IEEE International Conference on Automation Science and Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  29. Published

    Redundant robotic manipulator path planning for real-time obstacle and self-collision avoidance

    Kivelä, T., Mattila, J., Puura, J. & Launis, S., 21 Jun 2017, Advances in Service and Industrial Robotics: Proceedings of the 26th International Conference on Robotics in Alpe-Adria-Danube Region, RAAD 2017. Ferraresi, C. & Quaglia, G. (eds.). Springer International Publishing, p. 208-216 9 p. (Mechanisms and Machine Science; vol. 49).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  30. Published

    Service-oriented approach to fault tolerance in CPSs

    Alho, P. & Mattila, J., Jul 2015, In : Journal of Systems and Software. 105, p. 1-17 17 p.

    Research output: Contribution to journalArticleScientificpeer-review

  31. Published

    Stability-Guaranteed Anti-Sway Controller Design for a Redundant Articulated Hydraulic Manipulator in the Vertical Plane

    Mustalahti, P., Koivumäki, J. & Mattila, J., Oct 2017, ASME/BATH 2017 Symposium on Fluid Power and Motion Control. ASME, 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  32. Published

    Stability-Guaranteed Force-Sensorless Contact Force/Motion Control of Heavy-Duty Hydraulic Manipulators

    Koivumäki, J. & Mattila, J., 1 Aug 2015, In : IEEE Transactions on Robotics. 31, 4, p. 918-935 18 p.

    Research output: Contribution to journalArticleScientificpeer-review

  33. Published

    Stability-Guaranteed Impedance Control of Hydraulic Robotic Manipulators

    Koivumäki, J. & Mattila, J., 2017, In : IEEE - ASME Transactions on Mechatronics. 22, 2, p. 601-612

    Research output: Contribution to journalArticleScientificpeer-review

  34. Published

    Stability-Guaranteed Multiple Cartesian Degrees of Freedom Variable Impedance Control of Hydraulic Manipulators

    Koivumäki, J. & Mattila, J., 27 Oct 2016, 9th FPNI Ph.D. Symposium on Fluid Power. ASME, 10 p. FPNI2016-1565

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  35. Published

    Stability-Guaranteed Nonlinear Model-Based Control of Hydraulically Actuated Lightweight Structures

    Koivumäki, J., Mattila, J., Semini, C. & Caldwell, D. G., Oct 2017, ASME/Bath 2017 Fluid Power and Motion Control, FPMC2017. Sarasota, Florida, USA: ASME, 10 p. FPMC2017-4261

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  36. Published

    Stability-Guaranteed Nonlinear Model-Based Control of Hydraulic Robotic Manipulators

    Koivumäki, J., 2 Dec 2016, Tampere University of Technology. 71 p. (Tampere University of Technology. Publication; vol. 1446)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  37. Published

    System integration for real-time mobile manipulation

    Oftadeh, R., Aref, M. M., Ghabcheloo, R. & Mattila, J., 28 Mar 2014, In : international Journal of Advanced Robotic Systems. 11, 1, 51.

    Research output: Contribution to journalArticleScientificpeer-review

  38. Published

    The openSE Framework: an open, lean and participative approach to systems engineering

    Aha, L., Alami, R., Amjad, F., M. Aref, M., Baudin, M., Bonnal, P., Braesch, C., Del Sol, E., Devine, J., Fabry, T., Féral, B., Ferre, M., Forkel-Wirth, D., Ghabcheloo, R., Husby, Ø., Hyppölä, J., Douzi, I., Kauttu, P., Kamcheva, Z., Kershaw, K., Lari, L., Le Cardinal, J., Laukkanen, S., Lintala, M., Martinez Landa, H., Mattila, J., Malek, M., Masi, A., Nattanmai Parasuraman, R., Nicquevert, B., Niknam, M., Oftadeh, R., Orona Dominguez, L., Ovtcharova, J., Owen-Hill, A., Panchard, R., Perinic, G., Rolfe, A., Scott, R., Sekhar Pagala, P., Skournetou, D., Tabourot, L., Virtanen, S., Weick, H., Wijnands, T. & Winkler, M., Feb 2016, Geneva, Switzerland: CERN. 79 p.

    Research output: Book/ReportAnthologyProfessional

  39. Published

    Universal Path Following of Wheeled Mobile Robots

    Oftadeh, R., 21 Jun 2016, Tampere University of Technology. (Tampere University of Technology. Publication; vol. 1390)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  40. Published

    Vision-based Global Path Planning and Trajectory Generation for Robotic Applications in Hazardous Environments

    Ziaei, Z., 20 May 2016, Tampere: Tampere University of Technology. 48 p. ( Tampere University of Technology. Publication; vol. 1375)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  41. Published

    Vision-based path coordination for multiple mobile robots with four steering wheels using an overhead camera

    Ziaei, Z., Oftadeh, R. & Mattila, J., 1 Jul 2015, IEEE International Conference on Advanced Intelligent Mechatronics (AIM), 2015. p. 261-268 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  42. Published

    Vision-based trajectories planning for four wheels independently steered mobile robots with maximum allowable velocities

    Ziaei, Z., Oftadeh, R. & Mattila, J., 2015, Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics). Springer Verlag, Vol. 9287. p. 303-309 7 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 9287).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  43. Published

    Vision-Guided Autonomous Forklift

    M. Aref, M., Ghabcheloo, R., Kolu, A. & Mattila, J., 29 Nov 2016, Proceedings of the 25th Conference on Robotics in Alpe-Adria-Danube Region (RAAD). Rodić, A. & Borangiu, T. (eds.). Springer International Publishing, p. 338-346 8 p. (Advances in Intelligent Systems and Computing; vol. 540).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

ID: 10547787