Tampere University of Technology

TUTCRIS Research Portal

Research group: Mobile manipulation

Research unit: Research Group

  1. Conference contribution › Scientific › Peer-reviewed
  2. Published

    Inertial Sensor-Based State Estimation of Long-Reach Flexible-Link Manipulators

    Mäkinen, P. & Mattila, J., 2018, 2017 IEEE 8th International Conference on Cybernetics and Intelligent Systems (CIS) and IEEE Conference on Robotics, Automation and Mechatronics (RAM). IEEE, 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  3. Published

    Joint angle estimation for floating base robots utilizing MEMS IMUs

    Zhang, X., Peltola, E. & Mattila, J., 2017, 8th IEEE International Conference on Cybernetics and Intelligent Systems (CIS), Robotics, Automation and Mechatronics (RAM). China: IEEE, p. 282-287 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  4. Published

    Nonlinear Full-Model-Based Controller for Unactuated Joints in Vertical Plane

    Mustalahti, P. & Mattila, J., 2017, 8th IEEE International Conference on Cybernetics and Intelligent Systems (CIS), Robotics, Automation and Mechatronics (RAM). IEEE, p. 201-206 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  5. Published

    Novel pairwise coupled kinematic solution for algebraic angular acceleration estimation of serial link manipulators

    Vihonen, J., Honkakorpi, J., Mattila, J. & Visa, A., 29 Jun 2015, 2015 IEEE International Conference on Robotics and Automation (ICRA). Institute of Electrical and Electronics Engineers IEEE, p. 809-814 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  6. Published

    Object detection in robotic applications for real-time localization using semi-unknown objects

    Astola, P., Aref, M. M., Vihonen, J., Mattila, J. & Tabus, I., 1 Jul 2017, International Conference on Telecommunications and Signal Processing (TSP). IEEE, p. 682-687 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  7. Published

    On Design and Development of Super-FRS main tunnel Remote Handling System Concept

    Amjad, F., Weick, H., Mattila, J., Kozlova, E. & Schloer, C., 2014, 2014 IEEE 17th International Conference on Intelligent Transportation Systems (ITSC), 8-11 Oct. 2014, Qingdao. IEEE, p. 188-194 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  8. Published

    On-line Path Planning with Collision Avoidance for Coordinate-Controlled Robotic Manipulators

    Kivelä, T., Mattila, J., Puura, J. & Launis, S., 2017, ASME/Bath 2017 Fluid Power and Motion Control, FPMC2017. ASME, 10 p. FPMC2017-4297

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  9. Published

    Precise Outline Matching Criteria for Target Pose Estimation and Odometry from Stereo Video

    Astola, P., Helin, P., Aref, M., Mattila, J., Astola, J. & Tabus, I., 2016, International Conference on Telecommunications and Signal Processing (TSP). IEEE, p. 724-730

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  10. Published

    Real-time Distance Query and Collision Avoidance for Point Clouds with Heavy-duty Redundant Manipulator

    Kivelä, T., Mustalahti, P. & Mattila, J., 2017, 8th IEEE International Conference on Cybernetics and Intelligent Systems (CIS), Robotics, Automation and Mechatronics (RAM). IEEE, p. 272-277 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  11. Published

    Real-Time Vision-Based Navigation for Nonholonomic Mobile Robots

    M. Aref, M., Oftadeh, R., Ghabcheloo, R. & Mattila, J., 17 Nov 2016, 2016 IEEE International Conference on Automation Science and Engineering (CASE). IEEE, 8 p. (IEEE International Conference on Automation Science and Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  12. Published

    Redundant robotic manipulator path planning for real-time obstacle and self-collision avoidance

    Kivelä, T., Mattila, J., Puura, J. & Launis, S., 21 Jun 2017, Advances in Service and Industrial Robotics: Proceedings of the 26th International Conference on Robotics in Alpe-Adria-Danube Region, RAAD 2017. Ferraresi, C. & Quaglia, G. (eds.). Springer International Publishing, p. 208-216 9 p. (Mechanisms and Machine Science; vol. 49).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  13. Published

    Stability-Guaranteed Anti-Sway Controller Design for a Redundant Articulated Hydraulic Manipulator in the Vertical Plane

    Mustalahti, P., Koivumäki, J. & Mattila, J., Oct 2017, ASME/BATH 2017 Symposium on Fluid Power and Motion Control. ASME, 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  14. Published

    Stability-Guaranteed Multiple Cartesian Degrees of Freedom Variable Impedance Control of Hydraulic Manipulators

    Koivumäki, J. & Mattila, J., 27 Oct 2016, 9th FPNI Ph.D. Symposium on Fluid Power. ASME, 10 p. FPNI2016-1565

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  15. Published

    Stability-Guaranteed Nonlinear Model-Based Control of Hydraulically Actuated Lightweight Structures

    Koivumäki, J., Mattila, J., Semini, C. & Caldwell, D. G., Oct 2017, ASME/Bath 2017 Fluid Power and Motion Control, FPMC2017. Sarasota, Florida, USA: ASME, 10 p. FPMC2017-4261

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  16. Published

    Vision-based path coordination for multiple mobile robots with four steering wheels using an overhead camera

    Ziaei, Z., Oftadeh, R. & Mattila, J., 1 Jul 2015, IEEE International Conference on Advanced Intelligent Mechatronics (AIM), 2015. p. 261-268 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  17. Published

    Vision-based trajectories planning for four wheels independently steered mobile robots with maximum allowable velocities

    Ziaei, Z., Oftadeh, R. & Mattila, J., 2015, Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics). Springer Verlag, Vol. 9287. p. 303-309 7 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 9287).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  18. Published

    Vision-Guided Autonomous Forklift

    M. Aref, M., Ghabcheloo, R., Kolu, A. & Mattila, J., 29 Nov 2016, Proceedings of the 25th Conference on Robotics in Alpe-Adria-Danube Region (RAAD). Rodić, A. & Borangiu, T. (eds.). Springer International Publishing, p. 338-346 8 p. (Advances in Intelligent Systems and Computing; vol. 540).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  19. Conference contribution › Professional
  20. Published

    Modeling and Preliminary Design of Underwater Robot for Inspection

    Zavari, S., Salomaa, T., Koskinen, K., Villa Escusol, J. & Aaltonen, J., 2016, Proceedings of the 2nd Annual SMACC Research Seminar 2017. Tampere: Tampere University of Technology, p. 81-84 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  21. Anthology › Professional
  22. Published

    The openSE Framework: an open, lean and participative approach to systems engineering

    Aha, L., Alami, R., Amjad, F., M. Aref, M., Baudin, M., Bonnal, P., Braesch, C., Del Sol, E., Devine, J., Fabry, T., Féral, B., Ferre, M., Forkel-Wirth, D., Ghabcheloo, R., Husby, Ø., Hyppölä, J., Douzi, I., Kauttu, P., Kamcheva, Z., Kershaw, K., Lari, L., Le Cardinal, J., Laukkanen, S., Lintala, M., Martinez Landa, H., Mattila, J., Malek, M., Masi, A., Nattanmai Parasuraman, R., Nicquevert, B., Niknam, M., Oftadeh, R., Orona Dominguez, L., Ovtcharova, J., Owen-Hill, A., Panchard, R., Perinic, G., Rolfe, A., Scott, R., Sekhar Pagala, P., Skournetou, D., Tabourot, L., Virtanen, S., Weick, H., Wijnands, T. & Winkler, M., Feb 2016, Geneva, Switzerland: CERN. 79 p.

    Research output: Book/ReportAnthologyProfessional

  23. Doctoral thesis › Collection of Articles
  24. Published

    On Increasing the Automation Level of Heavy-Duty Hydraulic Manipulators with Condition Monitoring of the Hydraulic System and Energy-Optimised Redundancy Resolution

    Nurmi, J., 30 Jun 2017, Tampere University of Technology. 59 p. (Tampere University of Technology. Publication; vol. 1481)

    Research output: Book/ReportDoctoral thesisCollection of Articles

ID: 10547787