Tampere University of Technology

TUTCRIS Research Portal

Research group: Mobile manipulation

Research unit: Research Group

  1. A4 Article in a conference publication
  2. Published

    Stability-Guaranteed Multiple Cartesian Degrees of Freedom Variable Impedance Control of Hydraulic Manipulators

    Koivumäki, J. & Mattila, J., 27 Oct 2016, 9th FPNI Ph.D. Symposium on Fluid Power. ASME, 10 p. FPNI2016-1565

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  3. Published

    A Multistage Controller with Smooth Switching for Autonomous Pallet Picking

    M. Aref, M., Ghabcheloo, R., Kolu, A. & Mattila, J., 19 May 2016, IEEE International Conference on Robotics and Automation. Stockholm, Sweden: IEEE, p. 2535-2542 8 p. 2382

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  4. Published

    Digital Hydraulic Power Management System - Measured Characteristics of a Second Prototype

    Heikkilä, M., Tammisto, J., Linjama, M. & Huhtala, K., May 2016, Proceedings of the Eighth Workshop on Digital Fluid Power (DFP16) . Uusi-Heikkilä, J. & Linjama, M. (eds.). p. 69-81 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  5. Published

    Precise Outline Matching Criteria for Target Pose Estimation and Odometry from Stereo Video

    Astola, P., Helin, P., Aref, M., Mattila, J., Astola, J. & Tabus, I., 2016, International Conference on Telecommunications and Signal Processing (TSP). IEEE, p. 724-730

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  6. Published

    Vision-based path coordination for multiple mobile robots with four steering wheels using an overhead camera

    Ziaei, Z., Oftadeh, R. & Mattila, J., 1 Jul 2015, IEEE International Conference on Advanced Intelligent Mechatronics (AIM), 2015. p. 261-268 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  7. Published

    Novel pairwise coupled kinematic solution for algebraic angular acceleration estimation of serial link manipulators

    Vihonen, J., Honkakorpi, J., Mattila, J. & Visa, A., 29 Jun 2015, 2015 IEEE International Conference on Robotics and Automation (ICRA). Institute of Electrical and Electronics Engineers IEEE, p. 809-814 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  8. Published

    A time-optimal bounded velocity path-following controller for generic Wheeled Mobile Robots

    Oftadeh, R., Ghabcheloo, R. & Mattila, J., 29 Jun 2015, 2015 IEEE International Conference on Robotics and Automation (ICRA), 26-30 May 2015, Seattle, WA. Institute of Electrical and Electronics Engineers IEEE, p. 676-683 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  9. Published

    Vision-based trajectories planning for four wheels independently steered mobile robots with maximum allowable velocities

    Ziaei, Z., Oftadeh, R. & Mattila, J., 2015, Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics). Springer Verlag, Vol. 9287. p. 303-309 7 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 9287).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  10. Published

    On Design and Development of Super-FRS main tunnel Remote Handling System Concept

    Amjad, F., Weick, H., Mattila, J., Kozlova, E. & Schloer, C., 2014, 2014 IEEE 17th International Conference on Intelligent Transportation Systems (ITSC), 8-11 Oct. 2014, Qingdao. IEEE, p. 188-194 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  11. Published

    Geometry-Aided Inversion of Manipulator Telescopic Link Length from MEMS Accelerometer and Rate Gyro Readings

    Vihonen, J., Honkakorpi, J., Mattila, J. & Visa, A., 2014, 2014 IEEE International Conference on Robotics & Automation (ICRA) Hong Kong Convention and Exhibition Center, May 31 - June 7, 2014. Hong Kong, China. Institute of Electrical and Electronics Engineers IEEE, p. 181-186 6 p. (IEEE International Conference on Robotics & Automation (ICRA)).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  12. Published

    Geometrical workspace analysis of a cable-driven redundant parallel manipulator: KNTU CDRPM

    Mohammadi Aref, M. & Taghirad, H., 22 Sep 2008, IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS. . Nice: Institute of Electrical and Electronics Engineers IEEE, p. 1958-1963 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  13. A1 Journal article-refereed
  14. Published

    Adaptive and nonlinear control of discharge pressure for variable displacement axial piston pumps

    Koivumäki, J. & Mattila, J., 1 Oct 2017, In : Journal of Dynamic Systems, Measurement and Control: Transactions of the ASME. 139, 10, 101008.

    Research output: Contribution to journalArticleScientificpeer-review

  15. Published

    A generic method to optimize a redundant serial robotic manipulator's structure

    Kivelä, T., Mattila, J. & Puura, J., 1 Sep 2017, In : Automation in Construction. 81, p. 172-179 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  16. Published

    Global Energy-Optimal Redundancy Resolution of Hydraulic Manipulators: Experimental Results for a Forestry Manipulator

    Nurmi, J. & Mattila, J., 6 May 2017, In : Energies. 10, 5, 31 p., 647.

    Research output: Contribution to journalArticleScientificpeer-review

  17. Published

    Global energy-optimised redundancy resolution in hydraulic manipulators using dynamic programming

    Nurmi, J. & Mattila, J., Jan 2017, In : Automation in Construction. 73, January 2017, p. 120-134 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  18. Published

    Joint-Space Kinematic Model for Gravity-Referenced Joint Angle Estimation of Heavy-Duty Manipulators

    Vihonen, J., Mattila, J. & Visa, A., 2017, In : IEEE Transactions on Instrumentation and Measurement. 66, 12, p. 3280-3288

    Research output: Contribution to journalArticleScientificpeer-review

  19. Published

    Stability-Guaranteed Impedance Control of Hydraulic Robotic Manipulators

    Koivumäki, J. & Mattila, J., 2017, In : IEEE - ASME Transactions on Mechatronics. 22, 2, p. 601-612

    Research output: Contribution to journalArticleScientificpeer-review

  20. Published

    Linear accelerometers and rate gyros for rotary joint angle estimation of heavy-duty mobile manipulators using forward kinematic modeling

    Vihonen, J., Honkakorpi, J., Tuominen, J., Mattila, J. & Visa, A., 1 Jun 2016, In : IEEE - ASME Transactions on Mechatronics. 21, 3, p. 1765-1774 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  21. Published

    Stability-Guaranteed Force-Sensorless Contact Force/Motion Control of Heavy-Duty Hydraulic Manipulators

    Koivumäki, J. & Mattila, J., 1 Aug 2015, In : IEEE Transactions on Robotics. 31, 4, p. 918-935 18 p.

    Research output: Contribution to journalArticleScientificpeer-review

  22. Published

    Service-oriented approach to fault tolerance in CPSs

    Alho, P. & Mattila, J., Jul 2015, In : Journal of Systems and Software. 105, p. 1-17 17 p.

    Research output: Contribution to journalArticleScientificpeer-review

ID: 10547787