Tampere University of Technology

TUTCRIS Research Portal

Research group: Tribology and Machine Elements

Research unit: Research Group

  1. Article › Scientific › Peer-reviewed
  2. Published

    A comparison of relative displacement fields between numerical predictions and experimental results in fretting contact

    Juoksukangas, J., Lehtovaara, A. & Mäntylä, A., 1 Oct 2016, In : Proceedings of the institution of Mechanical Engineers Part J: Journal of Engineering Tribology. 230, 10, p. 1273-1287 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  3. Published

    An experimental approach for investigating scuffing initiation due to overload cycles with twin-disc test device

    Savolainen, M. & Lehtovaara, A., 6 Jan 2017, In : Tribology International. 109, p. 311-318

    Research output: Contribution to journalArticleScientificpeer-review

  4. Published

    An investigation of fatigue damage development under complete contact fretting test conditions

    Holopainen, S., Juoksukangas, J., Kouhia, R., Lehtovaara, A. & Saksala, T., 30 Dec 2016, In : Rakenteiden mekaniikka. 49, 3, p. 151-159 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  5. Published

    Applying the digital image correlation method to fretting contact for slip measurement

    Juoksukangas, J., Lehtovaara, A. & Mäntylä, A., 2015, In : Proceedings of the institution of Mechanical Engineers Part J: Journal of Engineering Tribology. 231, 4, 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  6. Published

    Comparison of laboratory rolling-sliding wear tests with in-service wear of nodular cast iron rollers against wire ropes

    Oksanen, V., Valtonen, K., Andersson, P., Vaajoki, A., Laukkanen, A., Holmberg, K. & Kuokkala, V. T., 15 Oct 2015, In : Wear. 340-341, p. 73-81 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  7. Published

    Detection of gear pitting failure progression with on-line particle monitoring

    Kattelus, J., Miettinen, J. & Lehtovaara, A., 2018, In : Tribology International. 118, p. 458-464

    Research output: Contribution to journalArticleScientificpeer-review

  8. Published

    Experimental and numerical investigation of fretting fatigue behavior in bolted joints

    Juoksukangas, J., Lehtovaara, A. & Mäntylä, A., 1 Nov 2016, In : Tribology International. 103, p. 440-448 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  9. Published

    Finite Element Method for the Calculation of Nominal Pressure Distribution between Ski and Track

    Pärssinen, K. & Lehtovaara, A., 1991, In : Finite Elements in Analysis and Design. 10, 1, p. 1-8

    Research output: Contribution to journalArticleScientificpeer-review

  10. Published

    Fretting-induced friction and wear in large flat-on-flat contact with quenched and tempered steel

    Hintikka, J., Lehtovaara, A. & Mäntylä, A., 2 Jul 2015, In : Tribology International. 92, p. 191-202 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  11. Published

    Modelling and Analysis of Elastic and Thermal Deformations of a Hybrid Journal Bearing

    Linjamaa, A., Lehtovaara, A., Larsson, R., Kallio, M. & Söchting, S., 2018, In : Tribology International. 118, p. 451-457

    Research output: Contribution to journalArticleScientificpeer-review

  12. Published

    Modelling and Analysis of Elastic and Thermal Deformations of a Hydrodynamic Radial Journal Bearing

    Linjamaa, A., Lehtovaara, A., Kallio, M. & Söchting, S., 2016, In : Key Engineering Materials. 674, p. 127-132 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  13. Published

    Modelling of spur gear contact using a local adaptive finite element mesh

    Lahtivirta, J. & Lehtovaara, A., 2016, In : Tribologia - Finnish Journal of Tribology. 34, 1-2, p. 43-56 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  14. Published

    Normal displacements in non-Coulomb friction conditions during fretting

    Hintikka, J., Lehtovaara, A. & Mäntylä, A., 2016, In : Tribology International. 94, p. 633-639

    Research output: Contribution to journalArticleScientificpeer-review

  15. Published

    Static friction measurements on steel against uncoated and coated cast iron

    Andersson, P., Kilpi, L., Holmberg, K., Vaajoki, A. & Oksanen, V., 1 Jan 2016, In : Tribologia. 34, 1-2, p. 5-40 36 p.

    Research output: Contribution to journalArticleScientificpeer-review

  16. Published

    Third Particle Ejection Effects on Wear with Quenched and Tempered Steel Fretting Contact

    Hintikka, J., Lehtovaara, A. & Mäntylä, A., 2017, In : TRIBOLOGY TRANSACTIONS. 60, 1, p. 70-78 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  17. Published

    Wear and corrosion resistant laser coatings for hydraulic piston rods

    Tuominen, J., Näkki, J., Pajukoski, T., Miettinen, J., Peltola, T. & Vuoristo, P., May 2015, In : Journal of Laser Applications. 27, 2, p. 022009-1 - 022009-12 12 p., 022009.

    Research output: Contribution to journalArticleScientificpeer-review

  18. Article › Professional
  19. Published

    Kitka ja kuluminen haastavat koneensuunnittelijat

    Valtonen, K. & Lehtovaara, A., 16 Feb 2016, In : Materia. 2016, 1, p. 29-30 2 p.

    Research output: Contribution to journalArticleProfessional

  20. Published

    Nopeutettu elinkaaren määritys, Tampereen teknillisen yliopiston NEM-projekti

    Miettinen, J., 10 Mar 2016, In : Koneviesti. 2016, 4, p. 44-45 2 p.

    Research output: Contribution to journalArticleProfessional

  21. Published

    Simulointi nopeuttaa käyttöiän määritystä

    Ojala, P., Saarenrinne, P., Miettinen, J., Multanen, P., Kiilunen, J., Hietala, J-P., Kolu, A., Pippola, J., Mostofizadeh, M. & Ylönen, M., 2015, In : Promaint. 2, p. 24-27 4 p.

    Research output: Contribution to journalArticleProfessional

  22. Chapter › Professional
  23. Published

    Optical measurements in scattering fluids

    Ojala, P. & Marjanen, K., 2011, Final report: Flow process management and control -project 2006 - 2010. TUT, p. 20-25 6 p. (TUT Department of Energy and Process Engineering report series).

    Research output: Chapter in Book/Report/Conference proceedingChapterProfessional

  24. Conference contribution › Scientific › Not peer-reviewed
  25. Published

    Detection of gear pitting failure progression with on-line particle monitoring

    Kattelus, J., Miettinen, J. & Lehtovaara, A., 16 Jun 2016, The 17th Nordic Symposium on Tribology - NORDTRIB 2016.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  26. Published

    Effect of contact pressure on fretting fatigue life in complete contacts

    Juoksukangas, J., Lehtovaara, A. J. & Mäntylä, A., 2013, ISFF7 - 7th International Symposium on Fretting Fatigue, Oxford, UK, April 8-11, 2013. Printed abstract and oral presentation..

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  27. Published

    Enviropower Hot Gas Desulfurization Pilot

    Salo, K., Ghazanfari, R., Feher, G., Konttinen, J., Lehtovaara, A. J. & Mojtahedi, W., 1994, In: Proc. of the Coal-Fired Power Systems - Advances in IGCC and PFBC Review Meeting. Eds McDaniel, H.,M., Staubly, R.,K,Venkataraman, V.,K., Morgantown, USA, June 21-23, 1994. . p. 236-245 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  28. Published

    Fretting analysis of medium speed diesel engines

    Mäntylä, A., Könnö, J., Lehtovaara, A. J. & Hintikka, J., 2013, ISFF7 - 7th International Symposium on Fretting Fatigue, Oxford, UK, April 8-11, 2013. Printed abstract and oral presentation..

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  29. Published

    Influence of application method and sintering temperature on porosity and thermal conductivity of two commercial silicon carbide based castables

    Silvonen, J., Ruusila, V., Levänen, E. & Uusitalo, M., 18 Sep 2015, UNITECR2015 – 14th Biennial Worldwide Congress. Proceeding 224

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  30. Published

    Variable friction coefficient in fretting point contact

    Hintikka, J., Lehtovaara, A. J. & Mäntylä, A., 2013, ISFF7 - 7th International Symposium on Fretting Fatigue, Oxford, UK, April 8-11, 2013. Printed abstract and oral presentation.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  31. Conference contribution › Scientific › Peer-reviewed
  32. Published

    Calculation of Contact Pressure between Solids with Initial Separation

    Lehtovaara, A., 1984, In: Proc. of the 10th Leeds-Lyon Symposium on Tribology. Eds. Dowson, D., Taylor, C.M., Godet, M., Berthe, D., Butterworths, London, 1984, pp. 292-296..

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  33. Published

    Demonstration of Biomass Gasification for IGCC Application

    Horvath, A., Lehtovaara, A. & Salo, K., 1995, EPRI Conference on New Power Generation Technology. San Francisco, USA, Oct 25-27.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  34. Published

    Development of process for adaptive lifetime estimation of mechanical assemblies using accelerated testing methods

    Hietala, J-P., Ojala, P., Multanen, P., Miettinen, J. & Saarenrinne, P., 26 Oct 2016, Risk, Reliability and Safety: Innovating Theory and Practice : Proceedings of the 26th European Safety and Reliability Conference, ESREL 2016, Glasgow, Scotland, 25-29 September 2016. Walls, L., Revie, M. & Bedford, T. (eds.). CRC Press; Taylor & Francis, 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  35. Published

    Fatigue Lifetime Estimation of Machine Component Using Accelerated Testing

    Hietala, J-P., Ojala, P., Multanen, P., Miettinen, J. & Saarenrinne, P., 2017, ESREL 2017. CRC Press

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  36. Published

    Integrated Approach to Air Pollution Control in an IGCC System

    Mojtahedi, W., Konttinen, J., Ylitalo, M. & Lehtovaara, A. J., 1995, Presented in 10th World Clean Air Congress. Espoo, Finland. May 28 - June 2, 1995. .

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  37. Published

    Multivariable accelerated testing of seep through of humidity due to vibration in electric connector

    Ojala, P., Pippola, J., Hietala, J-P., Miettinen, J., Frisk, L., Julkunen, P. & Varpe, E-L., 26 Oct 2016, Risk, Reliability and Safety: Innovating Theory and Practice: Proceedings of the 26th European, Safety and Reliability Conference, ESREL 2016, Glasgow, Scotland, 25-29 September 2016. Walls, L., Revie, M. & Bedford, T. (eds.). CRC Press, 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  38. Published

    Supervised Operation Monitoring and Control System of Rotating Rolls

    Salmenperä, P. & Miettinen, J., 2003, ASME 2003 International Mechanical Engineering Congress and Exposition. Washington DC, USA, Vol. 1 and 2. p. 1045-1051 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  39. Published

    The Development of a Biomass Based Simplified IGCC Process

    Liinanki, L., Horvath, A., Lehtovaara, A. & Lindgren, G., 1994, In: Thirteenth EPRI Conference on Gasification Power Plants. San Francisco, USA. October 19-21, 1994.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  40. Published

    The Role of Graphite in Sliding Bearing Braze Claddings

    Ruusila, V., Kallio, M. H., Uusitalo, M. A., Valtonen, K., Krappitz, H., Kuokkala, V-T. & Lehtovaara, A., Jan 2015, Proc. of the Twenty Eigth International Conference on Surface Modification Technologies, Ed. T. S. Sudarshan, P. Vuoristo and H. Koivuluoto, Tampere University of Technology June 16-18, 2014. p. 159-168

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  41. Conference contribution › Professional
  42. Published

    Digital image correlation method in hydro turbine shaft torque and vibration monitoring

    Saarenrinne, P., Miettinen, J., Ylönen, M. & Kokko, V., 27 Oct 2015, Proceedings of the Hydro 2015 Bordeaux 26-28 October 2015. Hydro Power & Dams, 8 p. 08.06

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  43. Published

    Load capacity of bismuth bronze bimetal bearing in lubricated conditions

    Oksanen, V., Lehtovaara, A. & Kallio, M., 2017, Proc. of 17th Nordic Symposium of Tribology, Aulanko, Hämeenlinna, Finland, June 14-17, 2016.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  44. Published

    Modelling and Analysis of Elastic and Thermal Deformations of a Hybrid Radial Journal Bearing

    Linjamaa, A., Lehtovaara, A., Kallio, M. & Söchting, S., 2017, The 17th Nordic Symposium on Tribology - 14-17 June, 2016 - Hämeenlinna, Finland.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  45. Paper, poster or abstract › Scientific
  46. Published

    Detection of gear pitting failure progression with on-line particle monitoring

    Kattelus, J., Miettinen, J. & Lehtovaara, A., 16 Jun 2016. 10 p.

    Research output: Other conference contributionPaper, poster or abstractScientific

  47. Doctoral thesis › Collection of Articles
  48. Published

    Fretting Induced Friction, Wear and Fatigue in Quenched and Tempered Steel

    Hintikka, J., 27 Jun 2016, Tampere University of Technology. 46 p. (Tampere University of Technology. Publication; vol. 1392)

    Research output: Book/ReportDoctoral thesisCollection of Articles

ID: 23185