Tampere University of Technology

TUTCRIS Research Portal

Research group: Tribology and Machine Elements

Research unit: Research Group

  1. A1 Journal article-refereed
  2. Published

    Detection of gear pitting failure progression with on-line particle monitoring

    Kattelus, J., Miettinen, J. & Lehtovaara, A., 2018, In : Tribology International. 118, p. 458-464

    Research output: Contribution to journalArticleScientificpeer-review

  3. Published

    Modelling and Analysis of Elastic and Thermal Deformations of a Hybrid Journal Bearing

    Linjamaa, A., Lehtovaara, A., Larsson, R., Kallio, M. & Söchting, S., 2018, In : Tribology International. 118, p. 451-457

    Research output: Contribution to journalArticleScientificpeer-review

  4. Published

    An experimental approach for investigating scuffing initiation due to overload cycles with twin-disc test device

    Savolainen, M. & Lehtovaara, A., 6 Jan 2017, In : Tribology International. 109, p. 311-318

    Research output: Contribution to journalArticleScientificpeer-review

  5. Published

    Third Particle Ejection Effects on Wear with Quenched and Tempered Steel Fretting Contact

    Hintikka, J., Lehtovaara, A. & Mäntylä, A., 2017, In : TRIBOLOGY TRANSACTIONS. 60, 1, p. 70-78 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  6. Published

    An investigation of fatigue damage development under complete contact fretting test conditions

    Holopainen, S., Juoksukangas, J., Kouhia, R., Lehtovaara, A. & Saksala, T., 30 Dec 2016, In : Rakenteiden mekaniikka. 49, 3, p. 151-159 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  7. Published

    Experimental and numerical investigation of fretting fatigue behavior in bolted joints

    Juoksukangas, J., Lehtovaara, A. & Mäntylä, A., 1 Nov 2016, In : Tribology International. 103, p. 440-448 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  8. Published

    A comparison of relative displacement fields between numerical predictions and experimental results in fretting contact

    Juoksukangas, J., Lehtovaara, A. & Mäntylä, A., 1 Oct 2016, In : Proceedings of the institution of Mechanical Engineers Part J: Journal of Engineering Tribology. 230, 10, p. 1273-1287 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  9. Published

    Static friction measurements on steel against uncoated and coated cast iron

    Andersson, P., Kilpi, L., Holmberg, K., Vaajoki, A. & Oksanen, V., 1 Jan 2016, In : Tribologia. 34, 1-2, p. 5-40 36 p.

    Research output: Contribution to journalArticleScientificpeer-review

  10. Published

    Normal displacements in non-Coulomb friction conditions during fretting

    Hintikka, J., Lehtovaara, A. & Mäntylä, A., 2016, In : Tribology International. 94, p. 633-639

    Research output: Contribution to journalArticleScientificpeer-review

  11. Published

    Modelling of spur gear contact using a local adaptive finite element mesh

    Lahtivirta, J. & Lehtovaara, A., 2016, In : Tribologia - Finnish Journal of Tribology. 34, 1-2, p. 43-56 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  12. Published

    Modelling and Analysis of Elastic and Thermal Deformations of a Hydrodynamic Radial Journal Bearing

    Linjamaa, A., Lehtovaara, A., Kallio, M. & Söchting, S., 2016, In : Key Engineering Materials. 674, p. 127-132 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  13. Published

    Comparison of laboratory rolling-sliding wear tests with in-service wear of nodular cast iron rollers against wire ropes

    Oksanen, V., Valtonen, K., Andersson, P., Vaajoki, A., Laukkanen, A., Holmberg, K. & Kuokkala, V. T., 15 Oct 2015, In : Wear. 340-341, p. 73-81 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  14. Published

    Fretting-induced friction and wear in large flat-on-flat contact with quenched and tempered steel

    Hintikka, J., Lehtovaara, A. & Mäntylä, A., 2 Jul 2015, In : Tribology International. 92, p. 191-202 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  15. Published

    Wear and corrosion resistant laser coatings for hydraulic piston rods

    Tuominen, J., Näkki, J., Pajukoski, T., Miettinen, J., Peltola, T. & Vuoristo, P., May 2015, In : Journal of Laser Applications. 27, 2, p. 022009-1 - 022009-12 12 p., 022009.

    Research output: Contribution to journalArticleScientificpeer-review

  16. Published

    Applying the digital image correlation method to fretting contact for slip measurement

    Juoksukangas, J., Lehtovaara, A. & Mäntylä, A., 2015, In : Proceedings of the institution of Mechanical Engineers Part J: Journal of Engineering Tribology. 231, 4, 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  17. Published

    Finite Element Method for the Calculation of Nominal Pressure Distribution between Ski and Track

    Pärssinen, K. & Lehtovaara, A., 1991, In : Finite Elements in Analysis and Design. 10, 1, p. 1-8

    Research output: Contribution to journalArticleScientificpeer-review

  18. A4 Article in a conference publication
  19. Published

    Fatigue Lifetime Estimation of Machine Component Using Accelerated Testing

    Hietala, J-P., Ojala, P., Multanen, P., Miettinen, J. & Saarenrinne, P., 2017, ESREL 2017. CRC Press

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  20. Published

    Multivariable accelerated testing of seep through of humidity due to vibration in electric connector

    Ojala, P., Pippola, J., Hietala, J-P., Miettinen, J., Frisk, L., Julkunen, P. & Varpe, E-L., 26 Oct 2016, Risk, Reliability and Safety: Innovating Theory and Practice: Proceedings of the 26th European, Safety and Reliability Conference, ESREL 2016, Glasgow, Scotland, 25-29 September 2016. Walls, L., Revie, M. & Bedford, T. (eds.). CRC Press, 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  21. Published

    Development of process for adaptive lifetime estimation of mechanical assemblies using accelerated testing methods

    Hietala, J-P., Ojala, P., Multanen, P., Miettinen, J. & Saarenrinne, P., 26 Oct 2016, Risk, Reliability and Safety: Innovating Theory and Practice : Proceedings of the 26th European Safety and Reliability Conference, ESREL 2016, Glasgow, Scotland, 25-29 September 2016. Walls, L., Revie, M. & Bedford, T. (eds.). CRC Press; Taylor & Francis, 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  22. Published

    The Role of Graphite in Sliding Bearing Braze Claddings

    Ruusila, V., Kallio, M. H., Uusitalo, M. A., Valtonen, K., Krappitz, H., Kuokkala, V-T. & Lehtovaara, A., Jan 2015, Proc. of the Twenty Eigth International Conference on Surface Modification Technologies, Ed. T. S. Sudarshan, P. Vuoristo and H. Koivuluoto, Tampere University of Technology June 16-18, 2014. p. 159-168

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Previous 1 2 Next

ID: 23185