Tampere University of Technology

TUTCRIS Research Portal

Research group: Tribology and Machine Elements

Research unit: Research Group

  1. Published

    Detection of gear pitting failure progression with on-line particle monitoring

    Kattelus, J., Miettinen, J. & Lehtovaara, A., 16 Jun 2016. 10 p.

    Research output: Other conference contributionPaper, poster or abstractScientific

  2. G5 Doctoral dissertation (article)
  3. Published

    Fretting Induced Friction, Wear and Fatigue in Quenched and Tempered Steel

    Hintikka, J., 27 Jun 2016, Tampere University of Technology. 46 p. (Tampere University of Technology. Publication; vol. 1392)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  4. D3 Professional conference proceedings
  5. Published

    Modelling and Analysis of Elastic and Thermal Deformations of a Hybrid Radial Journal Bearing

    Linjamaa, A., Lehtovaara, A., Kallio, M. & Söchting, S., 2017, The 17th Nordic Symposium on Tribology - 14-17 June, 2016 - Hämeenlinna, Finland.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  6. Published

    Load capacity of bismuth bronze bimetal bearing in lubricated conditions

    Oksanen, V., Lehtovaara, A. & Kallio, M., 2017, Proc. of 17th Nordic Symposium of Tribology, Aulanko, Hämeenlinna, Finland, June 14-17, 2016.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  7. Published

    Digital image correlation method in hydro turbine shaft torque and vibration monitoring

    Saarenrinne, P., Miettinen, J., Ylönen, M. & Kokko, V., 27 Oct 2015, Proceedings of the Hydro 2015 Bordeaux 26-28 October 2015. Hydro Power & Dams, 8 p. 08.06

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  8. D2 Article in professional manuals or guides or professional information systems or text book material
  9. Published

    Optical measurements in scattering fluids

    Ojala, P. & Marjanen, K., 2011, Final report: Flow process management and control -project 2006 - 2010. TUT, p. 20-25 6 p. (TUT Department of Energy and Process Engineering report series).

    Research output: Chapter in Book/Report/Conference proceedingChapterProfessional

  10. D1 Article in a trade journal
  11. Published

    Nopeutettu elinkaaren määritys, Tampereen teknillisen yliopiston NEM-projekti

    Miettinen, J., 10 Mar 2016, In : Koneviesti. 2016, 4, p. 44-45 2 p.

    Research output: Contribution to journalArticleProfessional

  12. Published

    Kitka ja kuluminen haastavat koneensuunnittelijat

    Valtonen, K. & Lehtovaara, A., 16 Feb 2016, In : Materia. 2016, 1, p. 29-30 2 p.

    Research output: Contribution to journalArticleProfessional

  13. Published

    Simulointi nopeuttaa käyttöiän määritystä

    Ojala, P., Saarenrinne, P., Miettinen, J., Multanen, P., Kiilunen, J., Hietala, J-P., Kolu, A., Pippola, J., Mostofizadeh, M. & Ylönen, M., 2015, In : Promaint. 2, p. 24-27 4 p.

    Research output: Contribution to journalArticleProfessional

  14. B3 Non-refereed article in conference proceedings
  15. Published

    Detection of gear pitting failure progression with on-line particle monitoring

    Kattelus, J., Miettinen, J. & Lehtovaara, A., 16 Jun 2016, The 17th Nordic Symposium on Tribology - NORDTRIB 2016.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  16. Published

    Influence of application method and sintering temperature on porosity and thermal conductivity of two commercial silicon carbide based castables

    Silvonen, J., Ruusila, V., Levänen, E. & Uusitalo, M., 18 Sep 2015, UNITECR2015 – 14th Biennial Worldwide Congress. Proceeding 224

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  17. Published

    Fretting analysis of medium speed diesel engines

    Mäntylä, A., Könnö, J., Lehtovaara, A. J. & Hintikka, J., 2013, ISFF7 - 7th International Symposium on Fretting Fatigue, Oxford, UK, April 8-11, 2013. Printed abstract and oral presentation..

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  18. Published

    Variable friction coefficient in fretting point contact

    Hintikka, J., Lehtovaara, A. J. & Mäntylä, A., 2013, ISFF7 - 7th International Symposium on Fretting Fatigue, Oxford, UK, April 8-11, 2013. Printed abstract and oral presentation.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  19. Published

    Effect of contact pressure on fretting fatigue life in complete contacts

    Juoksukangas, J., Lehtovaara, A. J. & Mäntylä, A., 2013, ISFF7 - 7th International Symposium on Fretting Fatigue, Oxford, UK, April 8-11, 2013. Printed abstract and oral presentation..

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  20. Published

    Enviropower Hot Gas Desulfurization Pilot

    Salo, K., Ghazanfari, R., Feher, G., Konttinen, J., Lehtovaara, A. J. & Mojtahedi, W., 1994, In: Proc. of the Coal-Fired Power Systems - Advances in IGCC and PFBC Review Meeting. Eds McDaniel, H.,M., Staubly, R.,K,Venkataraman, V.,K., Morgantown, USA, June 21-23, 1994. . p. 236-245 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  21. A4 Article in a conference publication
  22. Published

    Fatigue Lifetime Estimation of Machine Component Using Accelerated Testing

    Hietala, J-P., Ojala, P., Multanen, P., Miettinen, J. & Saarenrinne, P., 2017, ESREL 2017. CRC Press

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  23. Published

    Development of process for adaptive lifetime estimation of mechanical assemblies using accelerated testing methods

    Hietala, J-P., Ojala, P., Multanen, P., Miettinen, J. & Saarenrinne, P., 26 Oct 2016, Risk, Reliability and Safety: Innovating Theory and Practice : Proceedings of the 26th European Safety and Reliability Conference, ESREL 2016, Glasgow, Scotland, 25-29 September 2016. Walls, L., Revie, M. & Bedford, T. (eds.). CRC Press; Taylor & Francis, 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  24. Published

    Multivariable accelerated testing of seep through of humidity due to vibration in electric connector

    Ojala, P., Pippola, J., Hietala, J-P., Miettinen, J., Frisk, L., Julkunen, P. & Varpe, E-L., 26 Oct 2016, Risk, Reliability and Safety: Innovating Theory and Practice: Proceedings of the 26th European, Safety and Reliability Conference, ESREL 2016, Glasgow, Scotland, 25-29 September 2016. Walls, L., Revie, M. & Bedford, T. (eds.). CRC Press, 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  25. Published

    The Role of Graphite in Sliding Bearing Braze Claddings

    Ruusila, V., Kallio, M. H., Uusitalo, M. A., Valtonen, K., Krappitz, H., Kuokkala, V-T. & Lehtovaara, A., Jan 2015, Proc. of the Twenty Eigth International Conference on Surface Modification Technologies, Ed. T. S. Sudarshan, P. Vuoristo and H. Koivuluoto, Tampere University of Technology June 16-18, 2014. p. 159-168

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  26. Published

    Supervised Operation Monitoring and Control System of Rotating Rolls

    Salmenperä, P. & Miettinen, J., 2003, ASME 2003 International Mechanical Engineering Congress and Exposition. Washington DC, USA, Vol. 1 and 2. p. 1045-1051 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Previous 1 2 Next

ID: 23185