Tampere University of Technology

TUTCRIS Research Portal

Juha Miettinen

  1. A1 Journal article-refereed
  2. Published

    Shedding frequency in cavitation erosion evolution tracking

    Ylönen, M., Franc, J. P., Miettinen, J., Saarenrinne, P. & Fivel, M., 1 Sep 2019, In : International Journal of Multiphase Flow. 118, p. 141-149 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  3. Published

    Cavitation erosion resistance assessment and comparison of three francis turbine runner materials

    Ylönen, M., Saarenrinne, P., Miettinen, J., Franc, J-P., Fivel, M. & Nyyssönen, T., 26 Oct 2018, In : Materials Performance and Characterization. 7, 5, p. 1107-1126 20 p.

    Research output: Contribution to journalArticleScientificpeer-review

  4. Published

    Detection of gear pitting failure progression with on-line particle monitoring

    Kattelus, J., Miettinen, J. & Lehtovaara, A., 2018, In : Tribology International. 118, p. 458-464

    Research output: Contribution to journalArticleScientificpeer-review

  5. Published

    Wear and corrosion resistant laser coatings for hydraulic piston rods

    Tuominen, J., Näkki, J., Pajukoski, T., Miettinen, J., Peltola, T. & Vuoristo, P., May 2015, In : Journal of Laser Applications. 27, 2, p. 022009-1 - 022009-12 12 p., 022009.

    Research output: Contribution to journalArticleScientificpeer-review

  6. Published

    The correlation between gear contact friction and ball on disc friction measurements

    Björling, M., Miettinen, J., Marklund, P., Lehtovaara, A. & Larsson, R., 2015, In : Tribology International. 83, p. 114-119 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  7. Published

    Fatigue behavior of laser clad round steel bars

    Tuominen, J., Näkki, J., Poutala, J., Miettinen, J., Peltola, T., Vuoristo, P., Rasehorn, I., Alam, M. M. & Kaplan, A. F. H., 2014, In : Journal of Laser Applications. p. 1-10 10 p., 012006.

    Research output: Contribution to journalArticleScientificpeer-review

  8. Published

    Analysis of the stress raising action of flaws in laser clad deposits

    Alam, M. M., Kaplan, A. F. H., Tuominen, J., Vuoristo, P., Miettinen, J., Poutala, J., Näkki, J., Junkala, J., Peltola, T. & Barsoum, Z., 2013, In : Materials and Design. 46, April, p. 328-337 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  9. Published

    Surface pore initiated fatigue failure in laser clad components

    Alam, M. M., Powell, J., Kaplan, A. F. H., Tuominen, J., Vuoristo, P., Miettinen, J., Poutala, J., Näkki, J., Junkala, J. & Peltola, T., 2013, In : Journal of Laser Applications. 25, 3, p. 032004/1-6 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  10. Published

    Operation Monitoring of Grease Lubricated Rolling Bearings by Acoustic Emission Measurements

    Miettinen, J., 2004, In : International Journal of COMADEM. 7, 2, p. 2-11

    Research output: Contribution to journalArticleScientificpeer-review

  11. Published

    Ennakointi kunniassa

    Miettinen, J., 2003, In : Kunnossapito. 7, p. 56-58

    Research output: Contribution to journalArticleScientificpeer-review

  12. Published

    Operation monitoring of roll cover by acoustic emission

    Miettinen, J. & Salmenperä, P., 2003, In : Journal of Acoustic Emission. 21, p. 230-238

    Research output: Contribution to journalArticleScientificpeer-review

  13. Published

    Studying and Research of Operation Monitoring and Diagnostics in TUT

    Miettinen, J., 2002, In : Kunnossapito. 5, p. 57-59

    Research output: Contribution to journalArticleScientificpeer-review

  14. Published

    AE, The acoustic emission of grase lubricated rolling bearings

    Miettinen, J., 2001, In : Maintenance & Asset Management. 16, 2, p. 7-11

    Research output: Contribution to journalArticleScientificpeer-review

  15. Published

    Analysis of grease lubrication of a ball bearing using acoustic emission measurement

    Miettinen, J., Andersson, P. & Wikström, V., 2001, In : Proceedings of the institution of Mechanical Engineers Part J: Journal of Engineering Tribology. 215, 1, p. 535-544

    Research output: Contribution to journalArticleScientificpeer-review

  16. Published

    Acoustic emission of rolling bearings lubricated with contaminated grease

    Miettinen, J. & Andersson, P., 2000, In : Tribology International. 33, 11, p. 777-787

    Research output: Contribution to journalArticleScientificpeer-review

  17. Published

    Condition monitoring of grease lubricated bearings - Measurement of the AE activity of a rolling bearing lubricated with different types of greases

    Miettinen, J. & Andresson, P., 1999, In : Tribologia - Finnish Journal of Tribology. 18, 2, p. 3-10

    Research output: Contribution to journalArticleScientificpeer-review

  18. Published

    Acoustic emission in monitoring sliding contact behaviour

    Miettinen, J. & Siekkinen, V., 1995, In : Wear. 181-183, p. 897-900

    Research output: Contribution to journalArticleScientificpeer-review

  19. A4 Article in a conference publication
  20. Published

    Measurements of impact force excitation on wooden floors

    Lietzen, J., Miettinen, J., Kylliäinen, M. & Pajunen, S., May 2018, Proceedings of the 11th European Congress and Exposition on Noise Control Engineering, Euronoise 2018, May 27-31 2018, Hersonissos, Crete, Greece: Reduce Noise to Improve Life, Crete, May 27-31, 2018. Hersonissos, Crete, Greece: European Acoustic Association EAA, p. 1617-1622 6 p. 272.161. (Proceedings : European Conference on Noise Control).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  21. Published

    Cavitation bubble collapse monitoring by acoustic emission in laboratory testing

    Ylönen, M., Saarenrinne, P., Miettinen, J., Franc, J-P. & Fivel, M., 2018, Proceedings of the 10th Symposium on Cavitation (CAV2018): May 14-16, 2018, Baltimore, Maryland, USA. Katz, J. (ed.). ASME, p. 179-184 6 p. 05037

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  22. Published

    Modelling of seep through of humidity to electric connector with stochastic processes

    Ojala, P., Hietala, J-P., Miettinen, J., Julkunen, P. & Nieminen, I., 2017, ESREL 2017. Safety and Reliability. Theory and Applications. Cepin, M. & Bris, R. (eds.). CRC Press

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  23. Published

    Fatigue Lifetime Estimation of Machine Component Using Accelerated Testing

    Hietala, J-P., Ojala, P., Multanen, P., Miettinen, J. & Saarenrinne, P., 2017, ESREL 2017. CRC Press

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  24. Published

    Multivariable accelerated testing of seep through of humidity due to vibration in electric connector

    Ojala, P., Pippola, J., Hietala, J-P., Miettinen, J., Frisk, L., Julkunen, P. & Varpe, E-L., 26 Oct 2016, Risk, Reliability and Safety: Innovating Theory and Practice: Proceedings of the 26th European, Safety and Reliability Conference, ESREL 2016, Glasgow, Scotland, 25-29 September 2016. Walls, L., Revie, M. & Bedford, T. (eds.). CRC Press, 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  25. Published

    Development of process for adaptive lifetime estimation of mechanical assemblies using accelerated testing methods

    Hietala, J-P., Ojala, P., Multanen, P., Miettinen, J. & Saarenrinne, P., 26 Oct 2016, Risk, Reliability and Safety: Innovating Theory and Practice : Proceedings of the 26th European Safety and Reliability Conference, ESREL 2016, Glasgow, Scotland, 25-29 September 2016. Walls, L., Revie, M. & Bedford, T. (eds.). CRC Press; Taylor & Francis, 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  26. Published

    Full-field Strain Monitoring with Digital Image Correlation Method

    Ojala, P., Dospel, V. & Miettinen, J., 2013, The 26th International Congress of Condition Monitoring and Diagnostic Engineering Management, COMADEM 2013, 11-13 June, Helsinki. p. 1-8

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  27. Published

    Fatigue properties of laser clad round steel bars

    Tuominen, J., Näkki, J., Poutala, J., Miettinen, J., Peltola, T., Vuoristo, P., Rasehorn, I., Alam, M. & Kaplan, A., 2013, Proceedings of 32nd International Congress on Applications of Lasers & Electro-Optics ICALEO, October 6-10, 2013, Miami, FL, USA. Laser Institute of America, p. 998-1007 10 p. P140. (International Congress on Applications of Lasers and Electro-Optics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  28. Published

    Inverse Monitoring of Loading State with Output Measurements

    Dospel, V., Prokop, A., Ojala, P. & Miettinen, J., 2013, The 26th International Congress of Condition Monitoring and Diagnostic Engineering Management, COMADEM 2013, 11-13 June, Helsinki. p. 1-8 8 p. (International Congress of Condition Monitoring and Diagnostic Engineering Management).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  29. Published

    Dynamics of single-hit pneumatic test drill for pulse-shaping analysis of impacting waves

    Montonen, J., Keskinen, E., Cotsaftis, M., Miettinen, J. & Seemann, W., 2013, Proceedings of the ASME 2013 International Mechanical Engineering Congress and Exposition, IMECE2013, November 15-21, 2013, San Diego, California, USA. ASME, p. 1-7 7 p. 64835. (ASME International Mechanical Engineerig Congress and Exposition).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  30. Published

    Corrosion resistant laser coatings for hydraulic piston rods

    Tuominen, J., Näkki, J., Junkala, J., Miettinen, J., Peltola, T. & Vuoristo, P., 2012, Proceedings of the 31st International Congress on Applications of Lasers & Electro-Optics, ICALEO, September 23-27, 2012, Anaheim, California, USA. Laser Institute of America, p. 1202-1210 (International Congress on Applications of Lasers & Electro-Optics; vol. 105).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  31. Published

    Development of a test rig for reciprocating seals in heavy load conditions

    Juoksukangas, J., Lehtovaara, A., Miettinen, J., Tolvanen, P., Järvelä, P. & Niemi, A-M., 2010, 14th Nordic Symposium on Tribology, Nordtrib 2010, Storforsen, Sweden, Luleå University of Technology. p. 1-8 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  32. Published

    Dynamic response and chraracteristics of spectrum in a contact vibration model with random inputIn:

    Yuan, L., Järvenpää, V-M., Salmenperä, P., Miettinen, J. & Keskinen, E., 2009, Proceedings ot the 10th Finnish Mechanics Days, X Suomen Mekaniikkapäivät, Jyväskylä, 3.-4.12.2009. Mäkinen, R. (ed.). p. 419-429

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  33. Published

    Supervised Operation Monitoring and Control System of Rotating Rolls

    Salmenperä, P. & Miettinen, J., 2003, ASME 2003 International Mechanical Engineering Congress and Exposition. Washington DC, USA, Vol. 1 and 2. p. 1045-1051 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  34. Published

    Comparison of three Different Neural Network Architectures when Determining the Running Situation of a Machine

    Tervokoski, J., Miettinen, J. & Lumme, V. E., 2002, In: Rao, R.B.K.N., Nandi, A.K. Proceedings of the 15th International Congress, Comadem, 2-4 September, 2002, Birmingham, UK. p. 258-266

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  35. Published

    Diagnosis of a Heat Leverel by Vibration Signature Monitoring

    Salmenperä, P., Miettinen, J. & Määttä, T., 2002, Proceedings of ETCE 2002, February 4-6, 2002, Houston, Texas. p. 4 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  36. Published

    Wireless Operation Monitoring System for Polymer Covered Cylinders in Rolling contact

    Miettinen, J., Salmenperä, P., Järvinen, V. & Hirvonen, M., 2002, Proceedings of ETCE 2002, February 4-6, Houston, Texas. p. 5 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  37. Published

    Fatigue Monitoring of Paper Machine Rolls by Internal Strain Gage Measurements

    Keskinen, E., Järvinen, V., Miettinen, J. & Sundström, K., 2002, Proceedings of the 3rd Asia Pacific Conference on Systems Integrity and Maintenance, ACSIM 2002, September 25-27, 2002, Hilton Cairns, Australia. Mathew, J. (ed.). Brisbane, Australia, p. 184-189

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  38. Published

    Acoustic Emission Monitoring of Grease Lubricated Rolling Bearings

    Miettinen, J. & Salmenperä, P., 2000, Proceedings of the 13th International Conference Condition Monitoring and Diagnostic Engineering Management, Comadem 2000. p. 21-30

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  39. Published

    Acoustic measurements in condition monitoring

    Salmenperä, P. & Miettinen, J., 2000, Proceedings of the 13th International Congress Condition Monitoring and Diagnostic Engineering Management, Comadem 2000. p. 31-40

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  40. B2 Part of a book or another research book
  41. Published

    8 Erityisalueita, 8.5 Mekatroniikka

    Miettinen, J., 2014, Koneenosien suunnittelu. Björk, T., Hautala, P., Huhtala, K., Kivioja, S., Kleimola, M., Lavi, M., Martikka, H., Miettinen, J., Ranta, A., Rinkinen, J. & Salonen, P. (eds.). Helsinki: Sanoma Pro Oy, p. 485-492 8 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  42. Published

    8 Erityisalueita. 8.1. Tiivistimet

    Miettinen, J., 2014, Koneenosien suunnittelu. Björk, T., Hautala, P., Huhtala, K., Kivioja, S., Kleimola, M., Lavi, M., Martikka, H., Miettinen, J., Ranta, A., Rinkinen, J. & Salonen, P. (eds.). Helsinki: Sanoma Pro Oy, p. 405-417 14 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  43. B3 Non-refereed article in conference proceedings
  44. Published

    Detection of gear pitting failure progression with on-line particle monitoring

    Kattelus, J., Miettinen, J. & Lehtovaara, A., 16 Jun 2016, The 17th Nordic Symposium on Tribology - NORDTRIB 2016.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  45. Published

    Mapping of stress raising in laser clad components depending on geometry and defects

    Kaplan, F. H., Alam, M. M., Tuominen, J., Vuoristo, P., Miettinen, J., Poutala, J., Näkki, J., Junkala, T., Peltola, T. & Barsoum, Z., 2014, 67the IIW Annual Assembly & International Conference, 13th-18th July, 2014 Sheraton Grande Walkerhill & W Seoul Walkerhill, Seoul, Korea. Doc.IV-1174-14. p. 1-14

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  46. Published

    Stress raising in laser clad components depending on geometry and defects

    Kaplan, A. F. H., Alam, M. M., Tuominen, J., Vuoristo, P., Miettinen, J., Poutala, J., Näkki, J., Junkula, J., Peltola, T. & Barsoum, Z., 2013, The 14th Nordic Laser Materials Processing Conference, NOLAMP 14, August 26th - 28th 2013, Gothenburg, Sweden. Kaplan, A. & Engström, H. (eds.). Luleå: Luleå University of Technology, Department of Engineering Sciences and Mathematics, p. 281-292 12 p. (Nordic Laser Materials Processing Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  47. Published

    Voiteluaineen vaihdon vaikutus

    Miettinen, J., 2010, Värähtelyklinikka 2010, Kunnonvalvonnan uudistaminen, Kunnossapitoyhdistys, 14.-16.4.2010, Silja Symphony, Helsinki-Tukholma-Helsinki. p. 1-9 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  48. Published

    Korkeataajuiset värähtelymittaukset

    Miettinen, J., 2009, Kunnonvalvonta & diagnostiikka, 28.-29.1.2009, Kunnossapitoyhdistys, Nokia. p. 11 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  49. Published

    Signaalinkäsittelymenetelmät

    Miettinen, J., 2009, Kunnonvalvonta diagnostiikka, 28.-29.1.2009, Kunnossapitoyhdistys, Nokia. p. 14 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  50. Published

    Voiteluun liittyvää teoriaa ja "hiljaista" tietoa

    Miettinen, J., 2008, Värähtelyklinikka 2008, 2.-4.4.2008, Silja Serenade. p. 13 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  51. Published

    Running rolls with direct drive electric motors

    Miettinen, J., Salmenperä, P. & Kajander, V., 2007, Proceedings of the 2007 Artic Summer Conference on Dynamics, Vibrations and Control, August 6-10, 2007, Ivalo, Finland. Keskinen, E. & Karvinen, T. (eds.). p. 119-124

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  52. Published

    Feature analysis in monitoring and diagnosis of the running state of a casting crane

    Miettinen, J., Järvinen, V. & Leinonen, P., 2007, Second World Congress on Engineering Asset Management EAM and Fourth International Conference on Condition Monitoring, 11-14 June, 2007, Harrogate, UK. p. 1434-1443

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  53. Published

    Vääntövärähtely ja sen mittaaminen

    Miettinen, J., 2007, Värähtelyklinikka 2007: perus- ja erikoismittausten tarkoituksenmukainen käyttö, 25.-27.4.2007, Silja Serenade, Helsinki - Tukholma - Helsinki. p. 14 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  54. Published

    Control system for active piezo damper actuator

    Salmenperä, P., Miettinen, J. & Hirvonen, M., 2007, Proceedings of the 2007 Artic Summer Conference on Dynamics, Vibrations and Control, August 6-10, 2007, Ivalo, Finland. Keskinen, E. & Karvinen, T. (eds.). p. 145-149

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

Previous 1 2 3 Next

ID: 63897