Tampere University of Technology

TUTCRIS Research Portal

Matti Linjama

  1. Published

    High performance digital hydraulic servo system for linear cyclic motion

    Ahola, V., Linjama, M. & Vilenius, M., 2007, The Tenth Scandinavian International Conference on Fluid Power, May 21-23, 2007, Tampere, Finland, SICFP'07. Vilenius, J. & Koskinen, K. T. (eds.). Tampere: Tampere University of Technology, p. 275-287

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  2. Published

    Fault-tolerant scheduling of stateful tasks in uniprocessor real-time systems

    Alexeev, P., Boström, P., Walden, M., Huova, M., Linjama, M. & Sere, K., 2013, 3rd International Conference on Pervasive Embedded Computing and Communication Systems, PECCS 2013, Barcelona, Spain, 19.-21.2.2013. Benavente-Peces, C. & Filipe, J. (eds.). SCITEPRESS, p. 189-194 6 p. (International Conference on Pervasive Embedded Computing and Communication Systems).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  3. Published

    Analysis of Real-Time Properties of a Digital Hydraulic Power Management System

    Boström, P., Alexeev, P., Heikkilä, M., Huova, M., Waldén, M. & Linjama, M., 2014, 19th International Conference, FMICS 2014, Florence, Italy, September 11-12, 2014.. Springer International Publishing, p. 33-47 15 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  4. Published

    Development of Controllers Using Simulink and Contract-Based Design. Chapter 8

    Boström, P., Huova, M., Olszewska, M., Linjama, M., Heikkilä, M., Sere, K. & Walden, M., 2011, Dependability and Computer Engineering: Concepts for Software-Intensive Systems. Petre, L., Sere, K. & Troubitsyna, E. (eds.). Hershey, PA: IGI Global, p. 151-169

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  5. Published

    Contract-based design in controller development and its evaluation

    Boström, P., Plaska, M., Huova, M., Linjama, M., Heikkilä, M., Sere, K. & Walden, M., 2009, Nodes 09: Nordic workshop and doctoral symposium on Dependability and security, Linköping, Sweden, April 27, 2009. Asplund, M., Nadjm-Tehrani, S. & Petre, L. (eds.). p. 21-27

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  6. Published

    Verification and Validation of a Pressure Control Unit for Hydraulic Systems

    Boström, P., Heikkilä, M., Huova, M., Waldén, M. & Linjama, M., 2014, 6th International Workshop, SERENE 2014, Budapest, Hungary, October 15-16, 2014. Springer International Publishing, p. 101-115 15 p. (Lecture Notes in Computer Science; vol. 8785).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  7. Published

    Design and validation of digital controllers for hydraulics systems

    Boström, P., Linjama, M., Morel, L., Siivonen, L. & Walden, M., 2007, The Tenth Scandinavian International Conference on Fluid Power, May 21-23, 2007, Tampere, Finland, SICFP'07. Vilenius, J. & Koskinen, K. T. (eds.). Tampere: Tampere University of Technology, p. 227-241

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  8. Published

    Bayesian statistical analysis for performance evaluation in real-time control systems

    Boström, P., Heikkilä, M., Huova, M., Waldèn, M. & Linjama, M., 2015, Quantitative Evaluation of Systems: 12th International Conference, QEST 2015, Madrid, Spain, September 1-3, 2015, Proceedings. Springer Verlag, Vol. 9259. p. 312-328 17 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 9259).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  9. Published

    Sliding mode tracking control of a low-pressure water hydraulic cylinder under non-linear friction

    Cho, S. H., Linjama, M., Sairiala, H., Koskinen, K. T. & Vilenius, M., 2002, In : Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering. 216, p. 383-392

    Research output: Contribution to journalArticleScientificpeer-review

  10. Published

    Friction characteristics of a multi-chamber cylinder for digital hydraulics

    Cho, S. H., Niemi-Pynttäri, O. & Linjama, M., 2016, In : Proceedings of the institution of Mechanical Engineers Part C: Journal of Mechanical Engineering Science. 230, 5, p. 685-698 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  11. Published

    ITER divertor maintenance: Development of a control system for the remote handling of the divertor cassette mover

    Esque, S., Saarinen, H., Muhammad, A., Zhai, L., Tammisto, J., Seppälä, J., Mattila, J., Virvalo, T., Linjama, M. & Vilenius, M., 2007, Proceedings of the 22nd IEEE/NPSS Symposium on Fusion Engineering - SOFE 07, June 17-21, Albuquerque, New Mexico, USA. p. 6 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  12. Published

    Experimental evaluation of a piston-type digital pump-motor-transformer with two independent outlets

    Heikkilä, M., Tammisto, J., Huova, M., Huhtala, K. & Linjama, M., 2010, Fluid Power and Motion Control (FPMC 2010), 15-17 September 2010, University of Bath, UK. Johnston, D. N. & Plummer, A. (eds.). p. 83-97

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  13. Published

    Hydraulic Energy Recovery in Displacement Controlled Digital Hydraulic System

    Heikkilä, M. & Linjama, M., 2013, Proceedings of the 13th Scandinavian International Conference on Fluid Power, 3-5 June, Linköping, Sweden. Scandinavian International Conference on Fluid Power, p. 1-7 7 p. (Scandinavian International Conference on Fluid Power).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  14. Published

    Digital Hydraulic Power Management System with Five Independent Outlets - Simulation Study of Displacement Controlled Excavator Crane

    Heikkilä, M., Linjama, M. & Huhtala, K., 2014, Conference Proceedings, 9th International Fluid Power Conference 24th - 26th March, Aachen, Germany, Modern Fluid Power - Challenges, Responsibilities, Markets, Vol. 1. Murrenhoff, H. (ed.). Aachen: Hp - Fördervereinigung Fluidtechnik E.v., p. 455-465 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  15. Published

    Comparison of proportional control and displacement control using digital hydraulic power management system

    Heikkilä, M., Karvonen, M., Linjama, M., Tikkanen, S. & Huhtala, K., 2014, ASME/BATH 2014 Symposium on Fluid Power and Motion Control, FPMC2014, September 10-12, 2014, Bath, United Kingdom. The American Society of Mechanical Engineers ASME, p. 1-8 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  16. Published

    Direct connection of digital hydraulic power management system and double acting cylinder - a simulation study

    Heikkilä, M. & Linjama, M., 2011, The Fourth Workshop on Digital Fluid Power, 21st-22nd November, 2011, Linz, Austria. Linz: DFP-Workshops, p. 59-74 (Workshop on Digital Fluid Power; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  17. Published

    Improving damping characteristics of displacement controlled digital hydraulic system

    Heikkilä, M. & Linjama, M., 2012, DFP 12, Proceedings of the fifth workshop on digital fluid power, October 24-25, 2012, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). Tampere: Tampere University of Technology. Department of Intellidgent Hydraulics and Automation, p. 75-88 (Workshop on digital fluid power).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  18. Published

    Experimental evaluation of a digital hydraulic power management system

    Heikkilä, M., Tammisto, J., Huova, M., Huhtala, K. & Linjama, M., 2010, Proceedings of the Third Workshop on Digital Fluid Power, October 13-14 2010, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). p. 129-142

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  19. Published

    Displacement control of a mobile crane using a digital hydraulic power management system

    Heikkilä, M. & Linjama, M., 2013, In : Mechatronics. 23, 4, p. 452-461 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  20. Published

    Digital Hydraulic Power Management System - Measured Characteristics of a Second Prototype

    Heikkilä, M., Tammisto, J., Linjama, M. & Huhtala, K., May 2016, Proceedings of the Eighth Workshop on Digital Fluid Power (DFP16) . Uusi-Heikkilä, J. & Linjama, M. (eds.). p. 69-81 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Previous 1 2 3 4 5 6 7 8 ...10 Next

ID: 39448