Tampere University of Technology

TUTCRIS Research Portal

Matti Linjama

  1. Published

    Digital hydraulics research at IHA

    Linjama, M., 2008, Proceedings of the First Workshop on Digital Fluid Power 3rd October, 2008, Tampere, Finland. Linjama, M. & Laamanen, A. (eds.). p. 7-30

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  2. Published

    Laitteisto, ohjauspiiri ja menetelmä paineen ja tilavuusvirran tuottamiseksi

    Linjama, M., Tammisto, J., Huhtala, K. & Vilenius, M., 2010, Patent No. Pat. FI 121090 B, Priority date 30 Jun 2010, Priority No. (21) FI 20085242

    Research output: PatentScientific

  3. Published

    The Modeling and Actuator Space Control of Flexible Hydraulic Cranes

    Linjama, M., 1998, Helsinki: The Finnish Academy of Technology. 110 p. (Acta Polytechnica Scandinavica, Me; no. 129)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  4. Published

    Digital microhydraulics

    Linjama, M. & Karvonen, M., 2008, Proceedings of the First Workshop on Digital Fluid Power 3rd October, 2008, Tampere, Finland. Linjama, M. & Laamanen, A. (eds.). p. 141-152

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  5. Published

    Robustness of some low-order controllers in an electrohydraulic position servo drive

    Linjama, M. & Virvalo, T., 2001, Bath Workshop on Power Transmission and Motion Control (PTMC 2001). Burrows, C. R. & Edge, K. A. (eds.). p. 309-323

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  6. Published

    Proceedings of the First Workshop on Digital Fluid Power 3rd October, 2008 Tampere, Finland

    Linjama, M. (ed.) & Laamanen, A. (ed.), 2008, Tampere University of Technology.

    Research output: Book/ReportAnthologyScientificpeer-review

  7. Published

    Low-pressure water hydraulics vs. pneumatics - performance, efficiency and investments, a case study

    Linjama, M., Mäkinen, E., Virvalo, T. & Koskinen, K. T., 2003, The Eight Scandinavian International Conference on Fluid Power, Proceedings of the Conference, May 7-9, 2003, Tampere, Finland, SICFP´03. Koskinen, K. T. & Vilenius, M. (eds.). Tampere: Tampere University of Technology, p. 1003-1019

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  8. Published

    Discussion: Is the future of fluid power digital? Response

    Linjama, M., Scheidl, R. & Schmidt, S., 2012, In : Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering. 226, I6, p. 726-727

    Research output: Contribution to journalArticleScientific

  9. Published

    Digital hydraulics - Towards perfect valve technology

    Linjama, M. & Vilenius, M., 2007, The Tenth Scandinavian International Conference on Fluid Power, May 21-23, 2007, Tampere, Finland, SICFP'07. Vilenius, J. & Koskinen, K. T. (eds.). Tampere: Tampere University of Technology, p. 181-196

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  10. Published

    Dynamic properties of a flexible hydraulic crane

    Linjama, M. & Virvalo, T., 1997, New Achievements and Ideals in Fluid Power Engineering, Proceedings of the 4th International Conference on Fluid Power Transmission and Control, '97 ICFP, September 9-11, Hangzhou, China. Yongxiang, L. & Yiyuan, G. (eds.). Beijing: International Academic Publishers, p. 436-441

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  11. Published

    Digitaalihydrauliikka voi tulevaisuudessa korvata analogiventtiilit

    Linjama, M. & Vilenius, M., 2002, In : Metsä Forest, Hydrauliikka-liite. 1/2002, p. 1 s

    Research output: Contribution to journalArticleProfessional

  12. Published

    High-Speed On/Off Position Control of a Low-Pressure Water Hydraulic Cylinder Drive

    Linjama, M., Sairiala, H., Koskinen, K. T. & Vilenius, M., 2002, In : SAE Technical Papers. p. 8 s

    Research output: Contribution to journalArticleScientificpeer-review

  13. Published

    Energy saving digital hydraulics

    Linjama, M., 2009, Proceedings of The Second Workshop on Digital Fluid Power, 12-13 November 2009, Linz, Austria. Scheidl, R. & Winkler, B. (eds.). p. 5-20

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  14. Published

    Secondary controlled multi-chamber hydraulic cylinder

    Linjama, M., Vihtanen, H-P., Sipola, A. & Vilenius, M., 2009, The 11th Scandinavian International Conference on Fluid Power SICFP'09, Linköping, Sweden, June 2-4 2009. p. 15 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  15. Published

    Modelling of flow characteristics of on/off valves

    Linjama, M., Huova, M. & Karvonen, M., 2012, DFP 12, Proceedings of the fifth workshop on digital fluid power, October 24-25, 2012, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). Tampere: Tampere University of Technology, Department of Intelligent Hydraulics and Automation, p. 209-222 (Workshop on digital fluid power).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  16. Published

    Two-way solenoid valves in low-pressure water hydraulics

    Linjama, M., Koskinen, K., Tammisto, J. & Vilenius, M., 2000, Fluid Power Systems and Technology 2000. The 2000 ASME International Mechanical Engineering Congress and Exposition, November 5-10, 2000, Orlando, Florida, USA. McLain, T. & Kim, D. (eds.). USA, p. 55-60

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  17. Published

    Tavoitteena häviötön hydrauliikka

    Linjama, M., 2009, In : Fluid Finland. 3-4, p. 12-17

    Research output: Contribution to journalArticleProfessional

  18. Published

    High-precision On/Off position control of low-pressure water hydraulic cylinder

    Linjama, M., Oshima, S., Koskinen, K. T. & Vilenius, M., 2001, The Seventh Scandinavian International Conference on Fluid Power, SICFP´01, Linköping, Sweden, May 30 - June 1, 2001. p. 41-54

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  19. Published

    Model-based pressure control with digital valve system

    Linjama, M. & Lahtinen, J., 2011, The Fourth Workshop on Digital Fluid Power, 21st-22nd November, 2011, Linz, Austria. Linz: DFP-Workshops, p. 26-38 (Workshop on Digital Fluid Power; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  20. Published

    Energy-efficient motion control of a digital hydraulic joint actuator

    Linjama, M. & Vilenius, M., 2005, Proceedings of the 6th JFPS International Symposium on Fluid Power, November 7-10, 2005, Tsukuba, Japani. p. 640-645

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  21. Published

    Digital hydraulic power management system - towards lossless hydraulics

    Linjama, M. & Huhtala, K., 2010, Proceedings of the Third Workshop on Digital Fluid Power, October 13-14 2010, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). p. 5-22

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  22. Published

    Opas markkinatiedon lähteille

    Linjama, M., 1993, Tampere: Tampereen teknillinen korkeakoulu. 69 p. (Tampereen teknillinen korkeakoulu, Teollisuustalous, Raportteja ja työpapereita; no. 1/1993)

    Research output: Book/ReportCommissioned reportProfessional

  23. Published

    Digital pump-motor with independent outlets

    Linjama, M. & Huhtala, K., 2009, The 11th Scandinavian International Conference on Fluid Power SICFP'09, Linköping, Sweden, June 2-4 2009. p. 16 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  24. Published

    Improved digital hydraulic tracking control of water hydraulic cylinder drive

    Linjama, M. & Vilenius, M., 2005, In : International Journal of Fluid Power. 6, 1, p. 29-39

    Research output: Contribution to journalArticleScientificpeer-review

  25. Published

    Digitaalisen mikrohydrauliikan sovellussatoa

    Linjama, M., 2009, In : Fluid Finland. 2/2009, p. 30-31

    Research output: Contribution to journalArticleProfessional

  26. Published

    Digital hydraulic control of a mobile machine joint actuator mockup

    Linjama, M. & Vilenius, M., 2004, Bath Workshop on Power Transmission and Motion Control (PTMC 2004). p. 145-158

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  27. Published

    Digital hydraulics - Towards perfect valve technology

    Linjama, M. & Vilenius, M., 2008, In : Ventil - Journal for Hydraulics, Automation and Mechatronics. 14, 2, p. 138-148

    Research output: Contribution to journalArticleScientificpeer-review

  28. Published

    A control system and a method for controlling an actuator and for optimizing the control by means of sets of valves coupled in parallel

    Linjama, M., 2006, Patent No. Pat. EP 1386083 B1, Priority date 30 Aug 2006, Priority No. (21) 02716861.6 (30) FI 20010827

    Research output: PatentScientific

  29. Published

    On/off position control of low-pressure water hydraulic cylinder with two-way solenoid valves

    Linjama, M., Koskinen, K. T. & Vilenius, M., 2000, Tampere: Tampere University of Technology. 34 p. (Tampere University of Technology, Institute of Hydraulics and Automation, IHA, report; no. 78)

    Research output: Book/ReportCommissioned reportProfessional

  30. Published

    Digital schlägt Analog um 40%

    Linjama, M., 2008, In : Fluid. 7-8/2008, p. 12-13

    Research output: Contribution to journalArticleProfessional

  31. Published

    State-Space Model for Control Design of Multi-Link Flexible Hydraulic Cranes

    Linjama, M. & Virvalo, T., 1999, Proceedings of The Sixth Scandinavian International Conference on Fluid Power, May 26 - 28, 1999, Tampere, Finland. Koskinen, K. T., Vilenius, M. & Tikka, K. (eds.). Tampere, p. 981-998

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  32. Published

    Digitaalihydrauliikan kuulumiset

    Linjama, M., 2008, In : Fluid Finland. 2, p. 8-10

    Research output: Contribution to journalArticleProfessional

  33. Published

    Design and implementation of digital hydraulic synchronization and force control system

    Linjama, M., Hopponen, V., Ikonen, A., Rintamäki, P., Vilenius, M. & Pietola, M., 2009, The 11th Scandinavian International Conference on Fluid Power SICFP'09, Linköping, Sweden, June 2-4 2009. p. 13 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  34. Published

    Mechatronic design of digital hydraulic micro valve package

    Linjama, M., Paloniitty, M., Tiainen, L. & Huhtala, K., 2014, The Second International Conference on Dynamics and Vibroacoustics of Machines, September 15-17, 2014, Samara, Russia. p. 610-617 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  35. Published

    On/off position control of low-pressure water hydraulic cylinder using low-cost valves

    Linjama, M., Koskinen, K., Tammisto, J. & Vilenius, M., 2000, Proceedings. Sixth Triennal International Symposium on Fluid Control, Measurement and Visualization, FLUCOME 2000, August 13-17, 2000, Sherbrooke, Canada. Laneville, A. (ed.). p. 6 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  36. Published

    Accurate trajectory tracking control of water hydraulic cylinder with non-ideal on/off valves

    Linjama, M., Koskinen, K. T. & Vilenius, M., 2003, In : International Journal of Fluid Power. 4, 1, p. 7-16

    Research output: Contribution to journalArticleScientificpeer-review

  37. Published

    Modeling of interaction between hydraulic circuit and flexible robot mechanism

    Linjama, M. & Virvalo, T., 1998, Proceedings - The Fourth International Conference on Motion and Vibration Control MOVIC, August 25-28, 1998, ETH Zurich, Switzerland. Schweitzer, G. (ed.). p. 1115-1120

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  38. Published

    Adaptive on/off position control of low-pressure water hydraulic cylinder

    Linjama, M., Koskinen, K. T. & Vilenius, M., 2002, Proceedings of the 3rd International Fluid Power Conference, March 5th and 6th 2002, Aachen, Germany. p. 303-314

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  39. Published

    Modelling of a flexible hydraulic crane

    Linjama, M. & Virvalo, T., 1997, The Fifth Scandinavian International Conference on Fluid Power, SICFP 97, Linköping, Sweden, 28-30 May 1997. p. 33-48

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  40. Published

    Online minimization of power losses in distributed digital hydraulic valve system

    Linjama, M., Huova, M. & Vilenius, M., 2008, Proceedings of the 6th International Fluid Power Conference Dresden, Fluid Power in Motion, 6iFK, April 1.-2.2008, Dresden. p. 157-171

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  41. Published

    Is it time for digital hydraulics?

    Linjama, M., Laamanen, A. & Vilenius, M., 2003, The Eight Scandinavian International Conference on Fluid Power, Proceedings of the Conference, May 7-9, 2003, Tampere, Finland, SICFP´03. Koskinen, K. T. & Vilenius, M. (eds.). Tampere: Tampere University of Technology, p. 347-366

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  42. Published

    Numerically Efficient Flow Model for On/Off Valves

    Linjama, M., Siivonen, L. & Huova, M., Feb 2015, Proceedings of the Seventh Workshop on Digital Fluid Power. Scheidl, R., Winkler, B. & Kogler, H. (eds.). Linz, Austria: LCM GmbH, p. 164-172

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  43. Published

    Mechatronic Design of Digital Hydraulic Micro Valve Package

    Linjama, M., Paloniitty, M., Tiainen, L. & Huhtala, K., 2015, Procedia Engineering. Elsevier Ireland Ltd, Vol. 106. p. 97-107 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  44. Published

    Hydraulic Hybrid Actuator: Theoretical Aspects and Solution Alternatives

    Linjama, M., Huova, M., Pietola, M., Juhala, J. & Huhtala, K., May 2015, Proceedings of the Fourteenth Scandinavian International Conference on Fluid Power. Laamanen, A., Huhtala, K. & Uusi-Heikkilä, J. (eds.). Tampere: Tampere University of Technology, 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  45. Published

    High-Performance Digital Hydraulic Tracking Control of a Mobile Boom Mockup

    Linjama, M., Huova, M., Karhu, O. & Huhtala, K., Mar 2016, 10th International Fluid Power Conference (10. IFK) . Dresden, Vol. 1. 12 p. A-1

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  46. Published

    On the numerical solution of steady-state equations of digital hydraulic valve-actuator system

    Linjama, M., 24 May 2016, Proceedings of the eighth workshop on digital fluid power. Uusi-Heikkilä, J. & Linjama, M. (eds.). Tampere: Tampere University of Technology, p. 141-155

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  47. Published

    Energy efficient tracking control of a mobile machine boom mockup

    Linjama, M., Huova, M., Karhu, O. & Huhtala, K., 24 May 2016, Proceedings of the eighth workshop on digital fluid power. Uusi-Heikkilä, J. & Linjama, M. (eds.). Tampere: Tampere University of Technology, p. 265-275

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  48. Published

    Model-based force and position tracking control of an asymmetric cylinder with a digital hydraulic valve

    Linjama, M., Huova, M. & Huhtala, K., 1 Sep 2016, In : International Journal of Fluid Power. 17, 3, p. 163-172

    Research output: Contribution to journalArticleScientificpeer-review

  49. Published

    Robust control of digital hydraulic servo actuator

    Linjama, M., 7 Sep 2017, 9th workshop on digital fluid power (DFP17). 15 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  50. Published

    Model-based force and position tracking control of a multi-pressure hydraulic cylinder

    Linjama, M. & Huova, M., Jan 2018, In : Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering. 232, 3, p. 324-335

    Research output: Contribution to journalArticleScientificpeer-review

ID: 39448