Tampere University of Technology

TUTCRIS Research Portal

Matti Linjama

  1. Published

    Model-based control of a digital hydraulic transformer-based hybrid actuator

    Linjama, M., 2018, BATH/ASME 2018 Symposium on Fluid Power and Motion Control, FPMC 2018. ASME

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  2. Published

    Cavitation Resistant Water Hydraulic Pressure Relief Valve

    Liukkunen, T., Nurmia, M., Linjama, M., Koskinen, K. T. & Vilenius, M., 2002, Proceedings of the 3rd International Fluid Power Conference, March 5th and 6th 2002, Aachen, Germany. p. 255-266

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  3. Published

    Improving characteristics of on/off solenoid valves

    Mikkola, J., Ahola, V., Lauttamus, T., Luomaranta, M., Linjama, M. & Vilenius, M., 2007, The Tenth Scandinavian International Conference on Fluid Power, May 21-23, 2007, Tampere, Finland, SICFP'07. Vilenius, J. & Koskinen, K. T. (eds.). Tampere: Tampere University of Technology, p. 343-353

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  4. Published

    Low-Pressure Water Hydraulic Component Tests, Part I

    Myllykylä, J., Laakso, M., Lakkonen, M., Liukkunen, T., Tammisto, J., Einola, K., Soini, S., Linjama, M., Koskinen, K. T. & Vilenius, M., 1999, Tampere: Tampere University of Technology. 68 p. (Tampere University of Technology, Institute of Hydraulics and Automation, IHA, Report; no. 76)

    Research output: Book/ReportCommissioned reportProfessional

  5. Published

    Parallel pump-controlled multi-chamber cylinder

    Niemi-Pynttäri, O., Linjama, M., Laamanen, A. & Huhtala, K., 2014, ASME/BATH 2014 Symposium on Fluid Power and Motion Control, FPMC2014, September 10-12, 2014, Bath, United Kingdom. The American Society of Mechanical Engineers ASME, p. 1-9 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  6. Published

    Effect of cavitation in water hydraulic poppet valves

    Oshima, S., Leino, T., Linjama, M., Koskinen, K. T. & Vilenius, M. J., 2001, In : International Journal of Fluid Power. 2, 3, p. 5-14

    Research output: Contribution to journalArticleScientificpeer-review

  7. Published

    Experimental Study on Cavitation in Water Hydraulic Poppet Valve

    Oshima, S., Leino, T., Linjama, M., Koskinen, K. T. & Vilenius, M., 2002, In : Transactions of the Japan Fluid Power System Society. 33, 2, p. 29-35

    Research output: Contribution to journalArticleScientificpeer-review

  8. Published

    Laminated manifold for digital hydraulics - principles, challenges and benefits

    Paloniitty, M., Karvonen, M., Linjama, M. & Tiainen, T., 2012, DFP 12, Proceedings of the fifth workshop on digital fluid power, October 24-25, 2012, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). Tampere: Tampere University of Technology. Department of Intellidgent Hydraulics and Automation, p. 27-42 (Workshop on digital fluid power).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  9. Published

    Equal coded digital hydraulic valve system - improving tracking control with pulse frequency modulation

    Paloniitty, M., Linjama, M. & Huhtala, K., 2014, The Second International Conference on Dynamics and Vibroacoustics of Machines, September 15-17, 2014, Samara, Russia. p. 618-626 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  10. Published

    Concept of Digital Microhydraulic Valve System Utilising Lamination Technology

    Paloniitty, M., Linjama, M. & Huhtala, K., 2014, Conference Proceedings, 9th International Fluid Power Conference, 24th - 26th March, 2014, Aachen, Germany, Modern Fluid Power - Challenges, Responsibilities, Markets, Vol. 1. Murrenhoff, H. (ed.). Aachen: Hp - Fördervereinigung Fluidtechnik E.v., p. 303-313 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  11. Published

    Equal Coded Digital Hydraulic Valve System - Improving Tracking Control with Pulse Frequency Modulation

    Paloniitty, M., Linjama, M. & Huhtala, K., 2015, Procedia Engineering. Elsevier Ireland Ltd, Vol. 106. p. 83-91 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  12. Published

    A Miniature On/Off Valve Concept for High Performance Water Hydraulics

    Paloniitty, M. & Linjama, M., 19 Oct 2017, ASME/BATH 2017 Symposium on Fluid Power and Motion Control. ASME, 8 p. FPMC2017-4254

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  13. Published

    High-Linear Digital Hydraulic Valve Control by an Equal Coded Valve System and Novel Switching Schemes

    Paloniitty, M. & Linjama, M., 2018, In : Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering. 232, 3, p. 258-269

    Research output: Contribution to journalArticleScientificpeer-review

  14. Published

    Compact and efficient implementation of a pressurized tank line

    Paloniitty, M., Linjama, M. & Huova, M., 7 Nov 2018, 4 p.

    Research output: Other contributionScientific

  15. Published

    Quality analysis of simulink models

    Plaska, M., Huova, M., Walden, M., Sere, K. & Linjama, M., 2009, Proceedings of the Conquest 2009. 12th International Conference on Quality Engineering in Software Technology, 16-18 September 2009, Nuremberg, Germany. Schieferdecker, I. & Goericke, S. (eds.). p. 223-240

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  16. Published

    Low-cost proportional valve for low-pressure water hydraulics

    Sairiala, H., Linjama, M., Koskinen, K. T. & Vilenius, M., 2001, Bath Workshop on Power Transmission and Motion Control (PTMC 2001). Burrows, C. R. & Edge, K. A. (eds.). p. 135-145

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  17. Published

    Proportional Position Control of Low-Pressure Water Hydraulic Cylinder

    Sairiala, H., Linjama, M., Koskinen, K. T. & Vilenius, M., 2002, In : SAE Technical Papers. p. 7 s

    Research output: Contribution to journalArticleScientificpeer-review

  18. Published

    Proportional Position Control of Low-Pressure Water Hydraulic Cylinder

    Sairiala, H., Linjama, M., Koskinen, K. T. & Vilenius, M., 2002, Proceedings of the 49th National Conference on Fluid Power, March 19-21, 2002, Las Vegas, USA. USA, p. 227-234

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  19. Published

    Proportional Velocity Control of Low-Pressure Water Hydraulic Cylinder Drive

    Sairiala, H., Linjama, M., Koskinen, K. T. & Vilenius, M., 2002, Proceedings of the 5th JFPS International Symposium on Fluid Power, Nara 2002, November 13, 2002. Japan, p. 181-186

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  20. Published

    Is the future of fluid power digital?

    Scheidl, R., Linjama, M. & Schmidt, S., 2012, In : Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering. 226, 6, p. 721-723

    Research output: Contribution to journalArticleScientificpeer-review

  21. Published

    The effect of fluid visconsity on performance of proportional directional valve and digital flow control unit

    Siivonen, L., Linjama, M. & Vilenius, M., 2005, Proceedings of the Ninth Scandinavian International Conference on Fluid Power, SICFP'05, June 1.-3, 2005, Linköping, Sweden. p. 13 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  22. Published

    Jammed on/off valve fault compensation with distributed digital valve system

    Siivonen, L., Linjama, M., Huova, M. & Vilenius, M., 2009, In : International Journal of Fluid Power. 10, 2, p. 73-82

    Research output: Contribution to journalArticleScientificpeer-review

  23. Published

    Analysis of fault tolerance of digital hydraulic valve system

    Siivonen, L., Linjama, M. & Vilenius, M., 2005, Bath Workshop on Power Transmission and Motion Control (PTMC 2005), 7-9 September 2005. Johnston, D. N., Burrows, C. R. & Edge, K. A. (eds.). p. 133-146

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  24. Published

    Pressure based fault detection and diagnosis of a digital valve system

    Siivonen, L., Linjama, M., Huova, M. & Vilenius, M., 2007, Power Transmission and Motion Control (PTMC 2007), University of Bath, UK, 12-14 September 2007. Johnston, D. N. & Plummer, A. R. (eds.). p. 67-79

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  25. Published

    Fault tolerance of digital hydraulic valve system with separately controlled flow paths

    Siivonen, L., Linjama, M. & Vilenius, M., 2006, Proceedings of the 4th FPNI - PhD Symposium, Sarasota 2006, June 13-17, 2006, Sarasota, FL, USA. Ivantysynova, M. (ed.). p. 331-343

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  26. Published

    Detecting of faults in a valve system and a fault tolerant control

    Siivonen, L. & Linjama, M., 2012, Patent No. Pat. US 8215227 B2, Priority date 10 Jul 2012, Priority No. (21) 11/991559;(30) FI 20055479

    Research output: PatentScientific

  27. Published

    Fault Tolerance with digital Hydraulic Valve System

    Siivonen, L., Linjama, M. & Vilenius, M., 2011, The Eight International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 20-22 June 2011, Cardiff, Wales. Northamption: British Institute of Non-destructive Testing, p. 1250-1262 (International Conference on Condition Monitoring and Machinery Failure Prevention Technologies; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  28. Published

    Fault detection and diagnosis of digital hydraulic valve system

    Siivonen, L., Linjama, M., Huova, M. & Vilenius, M., 2007, The Tenth Scandinavian International Conference on Fluid Power, May 21-23, 2007, Tampere, Finland, SICFP'07. Vilenius, J. & Koskinen, K. T. (eds.). Tampere: Tampere University of Technology, p. 211-226

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  29. Published

    Accurate flow control with digital valve system

    Siivonen, L., Linjama, M., Vilenius, M. & Anttonen, P., 2008, Proceedings of the 51st National Conference on Fluid Power March 12-14, 2008, IFPE 2008, Las Vegas, USA. p. 287-294

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  30. Published

    Fault-Tolerant Control of EHA With Digital Hydraulic Valve System

    Siivonen, L., Aaltonen, J., Linjama, M. & Vilenius, M., 13 Jul 2007, Recent Advances in Aerospace Actuation Systems and Components. Toulouse, France: Institut National des Sciences Appliquées, p. 115-119 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  31. Published

    Fault Tolerance of Digital Hydraulics in High Dynamic Hydraulic System

    Siivonen, L., Linjama, M., Huova, M., Försterling, H., Stamm, E. & Deubel, T., 20 May 2015, The Fourteenth Scandinavian International Conference on Fluid Power. 1 ed. Tampere, Finland, Vol. 1. 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  32. Published

    Digital Hydraulic System

    Sipola, A., Vihtanen, H-P., Linjama, M. & Laamanen, A., 2014, Patent No. Australian Patent Office, AU 2009300985 B2, Priority date 8 May 2014, Priority No. (31) 20085958 : (21) 2009300985

    Research output: PatentScientific

  33. Published

    Verfahren und hydraulische Steueranordnung zur Ansteuerung eines Verbrauchers

    Stamm, E., Försterling, H., Huova, M., Siivonen, L. & Linjama, M., 2 Oct 2013, Patent No. DE 102012006219 A1

    Research output: PatentScientific

  34. Published

    A New Simulation Platform for Mechanical and Hydraulic Hybrid System-Especially for Hydraulic Manipulators

    Sun, W., Linjama, M. & Virvalo, T., 2003, 1st International Conference on Computational Method in Fluid Power Technology, Methods for solving practical problems in Design and Control 26-28 November 2003, Melbourne, Australia. Stecki, J. S. (ed.). p. 271-280

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  35. Published

    Measured characteristics of an in-line pump with independently controlled pistons

    Tammisto, J., Huova, M., Heikkilä, M., Linjama, M. & Huhtala, K., 2010, 7th International Fluid Power Conference (7th IFK), 22-24 March 2010, Aachen, Germany. p. 1-12 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  36. Published

    Proceedings of the Eighth Workshop on Digital Fluid Power (DFP16): May 24-25 2016, Tampere, Finland

    Uusi-Heikkilä, J. (ed.) & Linjama, M. (ed.), 28 Nov 2016, Tampere University of Technology. Department of Intellidgent Hydraulics and Automation. 275 p.

    Research output: Book/ReportAnthologyProfessional

  37. Published

    Dynamic analysis of a bistable actuator for digital hydraulics

    Uusitalo, J-P., Söderlund, L., Kettunen, L., Linjama, M. & Vilenius, M., 2009, In : IET Science Measurement and Technology. 3, 3, p. 235-243

    Research output: Contribution to journalArticleScientificpeer-review

  38. Published

    Novel bistable hammer valve for digital hydraulics

    Uusitalo, J-P., Söderlund, L., Kettunen, L., Ahola, V. & Linjama, M., 2009, Proceedings of The Second Workshop on Digital Fluid Power, 12-13 November 2009, Linz, Austria. Scheidl, R. & Winkler, B. (eds.). p. 33-48

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  39. Published

    Miniaturized bistable seat valve

    Uusitalo, J-P., Lauttamus, T., Linjama, M., Söderlund, L., Vilenius, M. & Kettunen, L., 2007, The Tenth Scandinavian International Conference on Fluid Power, May 21-23, 2007, Tampere, Finland, SICFP'07. Vilenius, J. & Koskinen, K. T. (eds.). Tampere: Tampere University of Technology, p. 379-391

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  40. Published

    Novel bistable hammer valve for digital hydraulics

    Uusitalo, J-P., Ahola, V., Söderlund, L., Linjama, M., Juhola, M. & Kettunen, L., 2010, In : International Journal of Fluid Power. 11, 3, p. 35-44

    Research output: Contribution to journalArticleScientificpeer-review

  41. Published

    Comparing different controllers of an electrohydraulic position servo

    Virvalo, T., Linjama, M. & Mattila, J., 1997, New Achievements and Ideals in Fluid Power Engineering, Proceedings of the 4th International Conference on Fluid Power Transmission and Control, '97 ICFP, September 9-11, Hangzhou, China. Yongxiang, L. & Yiyuan, G. (eds.). Beijing: International Academic Publishers, p. 215-219

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  42. Published

    User friendly environment for the R&D of controllers in heavy machinery

    Virvalo, T., Linjama, M., Aaltonen, V. & Kivikoski, M., 2000, Proceedings of the International Conference on Machine Automation, ICMA2000, Human Friendly Mechatronics, September 27-29, 2000, Osaka Institute of Technology, Osaka, Japan. Japani, p. 213-218

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  43. Published

    User friendly environment for the R&D of controllers in heavy machinery

    Virvalo, T., Linjama, M., Aaltonen, V. & Kivikoski, M., 2000, Human Friendly Mechatronics, Selected Papers of the International Conference on Machine Automation ICMA2000, September 27-29, 2000, Osaka, Japan. p. 359-364

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  44. Published

    A computed force controller in a pneumatic position servo

    Virvalo, T., Linjama, M. & Mattila, J., 1997, New Achievements and Ideals in Fluid Power Engineering, Proceedings of the 4th International Conference on Fluid Power Transmission and Control, '97 ICFP, September 9-11, Hangzhou, China. Yongxiang, L. & Yiyuan, G. (eds.). Beijing: International Academic Publishers, p. 327-330

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  45. Published

    Experimental study of robustness of some controllers in a hydraulic position servo drive

    Virvalo, T. & Linjama, M., 2001, Sbornik konference, Hydraulika a Pneumatika, June 5-6, 2001, Ostrava, Czech Republic. p. 199-208

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  46. Published

    Compensation of the null point drift of a hydraulic servo valve in a position servo application

    Virvalo, T. & Linjama, M., 1999, Proceedings of the 3rd International Symposium on Fluid Power Transmission and Control, September 7-9, 1999, Harbin, China. p. 259-263

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

Previous 1 2 3 4 Next

ID: 39448