Tampere University of Technology

TUTCRIS Research Portal

Matti Linjama

  1. 2019
  2. Published

    Digital hydraulic multi-pressure actuators - simulation study of a forwarder crane

    Heikkilä, M., Huova, M. & Linjama, M., 28 Feb 2019, The 10th Workshop on Digital Fluid Power : February 28th - March 1st, 2019, Linz, Austria. Linz Center of Mechatronics, 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  3. Published

    Switching control of a water hydraulic cylinder with slow parallel-connected on/off valves

    Linjama, M., Grönholm, J. & Paloniitty, M., 28 Feb 2019, The 10th Workshop on Digital Fluid Power : February 28th-March 1st, 2019, Linz, Austria. Linz Center of Mechatronics, 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  4. E-pub ahead of print

    Variable speed digital hydraulic transformer–based servo drive

    Linjama, M., 2019, In : Proceedings of the Institution of Mechanical Engineers. Part I: Journal of Systems and Control Engineering.

    Research output: Contribution to journalArticleScientificpeer-review

  5. 2018
  6. Published

    Compact and efficient implementation of a pressurized tank line

    Paloniitty, M., Linjama, M. & Huova, M., 7 Nov 2018, 4 p.

    Research output: Other contributionScientific

  7. Published

    Comparison of energy saving methods for loader

    Huova, M., Heikkilä, M., Linjama, M., Tikkanen, S. & Huhtala, K., 17 Oct 2018, Proceedings of the 10th Colloquium Mobile Hydraulics, MHK 2018: 16th and 17th October 2018, Brunswick, Germany.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  8. Published

    Fuel efficiency analysis of selected hydraulic hybrids in a wheel loader application

    Huova, M., Tammisto, J., Linjama, M. & Tervonen, J., 14 Sep 2018, Proceedings of the BATH/ASME 2018 Symposium on Fluid Power and Motion Control FPMC2018: Bath, UK, September 12-14, 2018. ASME, 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  9. Published

    Novel fine positioning method for hydraulic drives utilizing on/off-valves

    Huova, M., Linjama, M., Siivonen, L., Deubel, T., Försterling, H. & Stamm, E., 14 Sep 2018, Proceedings of the BATH/ASME 2018 Symposium on Fluid Power and Motion Control FPMC2018: Bath, UK, September 12-14, 2018. ASME, 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  10. Published

    Fuel efficiency optimization of a baseline wheel loader and its hydraulic hybrid variants using dynamic programming

    Heikkilä, M., Huova, M., Tammisto, J., Linjama, M. & Tervonen, J., Sep 2018, Proceedings of the BATH/ASME 2018 Symposium on Fluid Power and Motion Control FPMC2018: Bath, UK, September 12-14, 2018. ASME, 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  11. Published

    Fault-tolerant control of a multi-outlet digital hydraulic pump-motor

    Heikkilä, M. & Linjama, M., Mar 2018, Fluid power networks: Proceedings of the 11th International Fluid Power Conference, 19th-21st March 2018, Aachen. Murrenhoff, H. (ed.). Aachen University: RWTH Publications, Vol. 1. p. 145-157 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  12. Published

    Model-based force and position tracking control of a multi-pressure hydraulic cylinder

    Linjama, M. & Huova, M., Jan 2018, In : Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering. 232, 3, p. 324-335

    Research output: Contribution to journalArticleScientificpeer-review

  13. Published

    High-Linear Digital Hydraulic Valve Control by an Equal Coded Valve System and Novel Switching Schemes

    Paloniitty, M. & Linjama, M., 2018, In : Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering. 232, 3, p. 258-269

    Research output: Contribution to journalArticleScientificpeer-review

  14. Published

    Model-based control of a digital hydraulic transformer-based hybrid actuator

    Linjama, M., 2018, BATH/ASME 2018 Symposium on Fluid Power and Motion Control, FPMC 2018. ASME

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  15. 2017
  16. Published

    A Miniature On/Off Valve Concept for High Performance Water Hydraulics

    Paloniitty, M. & Linjama, M., 19 Oct 2017, ASME/BATH 2017 Symposium on Fluid Power and Motion Control. ASME, 8 p. FPMC2017-4254

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  17. Published

    Fast switching valve for low-pressure water hydraulics

    Heikkilä, M., Paloniitty, M. & Linjama, M., 8 Sep 2017. 9 p.

    Research output: Other conference contributionPaper, poster or abstractScientific

  18. Published

    High flowrate digital hydraulic valve system

    Ketonen, M. & Linjama, M., 7 Sep 2017, The Ninth Workshop on Digital Fluid Power.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  19. Published

    Robust control of digital hydraulic servo actuator

    Linjama, M., 7 Sep 2017, 9th workshop on digital fluid power (DFP17). 15 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  20. Published

    Study of Energy Losses in Digital Hydraulic Multi-Pressure Actuator

    Huova, M., Aalto, A., Linjama, M. & Huhtala, K., 8 Jun 2017, The 15th Scandinavian International Conference on Fluid Power, SICFP’17, June 7-9, 2017, Linköping, Sweden. Linköping University Electronic Press, p. 214-223 (Linköping Electronic Conference Proceedings).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  21. Published

    Simulation study of a digital hydraulic independent metering valve system on an excavator

    Ketonen, M. & Linjama, M., 7 Jun 2017, The 15th Scandinavian International Conference on Fluid Power. Linköping University Electronic Press, p. 136-146 (Linköping Electronic Conference Proceedings).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  22. Published

    Digital hydraulic multi-pressure actuator – the concept, simulation study and first experimental results

    Huova, M., Aalto, A., Linjama, M., Huhtala, K., Lantela, T. & Pietola, M., 2017, In : International Journal of Fluid Power. 18, 3, p. 141-152 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  23. 2016
  24. Published

    Proceedings of the Eighth Workshop on Digital Fluid Power (DFP16): May 24-25 2016, Tampere, Finland

    Uusi-Heikkilä, J. (ed.) & Linjama, M. (ed.), 28 Nov 2016, Tampere University of Technology. Department of Intellidgent Hydraulics and Automation. 275 p.

    Research output: Book/ReportAnthologyProfessional

  25. Published

    Model-based force and position tracking control of an asymmetric cylinder with a digital hydraulic valve

    Linjama, M., Huova, M. & Huhtala, K., 1 Sep 2016, In : International Journal of Fluid Power. 17, 3, p. 163-172

    Research output: Contribution to journalArticleScientificpeer-review

  26. Published

    Energy efficient tracking control of a mobile machine boom mockup

    Linjama, M., Huova, M., Karhu, O. & Huhtala, K., 24 May 2016, Proceedings of the eighth workshop on digital fluid power. Uusi-Heikkilä, J. & Linjama, M. (eds.). Tampere: Tampere University of Technology, p. 265-275

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  27. Published

    On the numerical solution of steady-state equations of digital hydraulic valve-actuator system

    Linjama, M., 24 May 2016, Proceedings of the eighth workshop on digital fluid power. Uusi-Heikkilä, J. & Linjama, M. (eds.). Tampere: Tampere University of Technology, p. 141-155

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  28. Published

    Digital Hydraulic Power Management System - Measured Characteristics of a Second Prototype

    Heikkilä, M., Tammisto, J., Linjama, M. & Huhtala, K., May 2016, Proceedings of the Eighth Workshop on Digital Fluid Power (DFP16) . Uusi-Heikkilä, J. & Linjama, M. (eds.). p. 69-81 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  29. Published

    High-Performance Digital Hydraulic Tracking Control of a Mobile Boom Mockup

    Linjama, M., Huova, M., Karhu, O. & Huhtala, K., Mar 2016, 10th International Fluid Power Conference (10. IFK) . Dresden, Vol. 1. 12 p. A-1

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  30. Published

    Friction characteristics of a multi-chamber cylinder for digital hydraulics

    Cho, S. H., Niemi-Pynttäri, O. & Linjama, M., 2016, In : Proceedings of the institution of Mechanical Engineers Part C: Journal of Mechanical Engineering Science. 230, 5, p. 685-698 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  31. 2015
  32. Published

    Fault Tolerance of Digital Hydraulics in High Dynamic Hydraulic System

    Siivonen, L., Linjama, M., Huova, M., Försterling, H., Stamm, E. & Deubel, T., 20 May 2015, The Fourteenth Scandinavian International Conference on Fluid Power. 1 ed. Tampere, Finland, Vol. 1. 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  33. Published

    Hydraulic Hybrid Actuator: Theoretical Aspects and Solution Alternatives

    Linjama, M., Huova, M., Pietola, M., Juhala, J. & Huhtala, K., May 2015, Proceedings of the Fourteenth Scandinavian International Conference on Fluid Power. Laamanen, A., Huhtala, K. & Uusi-Heikkilä, J. (eds.). Tampere: Tampere University of Technology, 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  34. Published

    Characteristics of Digital Hydraulics with Commercial Controllers

    Huova, M., Ahopelto, M., Ketonen, M., Ahola, V., Linjama, M. & Huhtala, K., Feb 2015, The Seventh Workshop on Digital Fluid Power . Linz Center of Mechatronics, p. 114-128 15 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  35. Published

    Numerically Efficient Flow Model for On/Off Valves

    Linjama, M., Siivonen, L. & Huova, M., Feb 2015, Proceedings of the Seventh Workshop on Digital Fluid Power. Scheidl, R., Winkler, B. & Kogler, H. (eds.). Linz, Austria: LCM GmbH, p. 164-172

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  36. Published

    Bayesian statistical analysis for performance evaluation in real-time control systems

    Boström, P., Heikkilä, M., Huova, M., Waldèn, M. & Linjama, M., 2015, Quantitative Evaluation of Systems: 12th International Conference, QEST 2015, Madrid, Spain, September 1-3, 2015, Proceedings. Springer Verlag, Vol. 9259. p. 312-328 17 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 9259).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  37. Published

    Equal Coded Digital Hydraulic Valve System - Improving Tracking Control with Pulse Frequency Modulation

    Paloniitty, M., Linjama, M. & Huhtala, K., 2015, Procedia Engineering. Elsevier Ireland Ltd, Vol. 106. p. 83-91 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  38. Published

    Mechatronic Design of Digital Hydraulic Micro Valve Package

    Linjama, M., Paloniitty, M., Tiainen, L. & Huhtala, K., 2015, Procedia Engineering. Elsevier Ireland Ltd, Vol. 106. p. 97-107 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  39. 2014
  40. Published

    Retrofitting digital hydraulics – An analytical study

    Ketonen, M., Linjama, M. & Huhtala, K., 24 Mar 2014, Conference proceedings, 9th International Fluid Power Conference Aachen: Modern Fluid Power - Challenges, Responsibilities, Markets, Vol. 1. Aachen Germany, p. 163 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  41. Published

    Analysis by Simulation of Different Control Algorithms of A Digital Hydraulic Two-Actuator System

    Karvonen, M., Heikkilä, M., Huova, M. & Linjama, M., 2014, In : International Journal of Fluid Power. 15, 1, p. 33-44 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  42. Published

    Analysis of Real-Time Properties of a Digital Hydraulic Power Management System

    Boström, P., Alexeev, P., Heikkilä, M., Huova, M., Waldén, M. & Linjama, M., 2014, 19th International Conference, FMICS 2014, Florence, Italy, September 11-12, 2014.. Springer International Publishing, p. 33-47 15 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  43. Published

    Analysis of signals and power flow in a digital hydraulic multi actuator application

    Karvonen, M., Heikkilä, M., Linjama, M. & Huhtala, K., 2014, 8th FPNI Ph.D Symposium on Fluid Power, FPNI2014, June 11-13, 2014, Lappeenranta, Finland. The American Society of Mechanical Engineers ASME, p. 1-12 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  44. Published

    Aspects of the energy consumption of a digital hydraulic power management system supplying a digital and proportional valve controlled multi actuator system

    Karvonen, M., Heikkilä, M., Tikkanen, S., Linjama, M. & Huhtala, K., 2014, ASME/BATH 2014 Symposium on Fluid Power and Motion Control, FPMC2014, September 10-12, 2014, Bath, United Kingdom. The American Society of Mechanical Engineers ASME, p. 1-9 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  45. Published

    Comparison of proportional control and displacement control using digital hydraulic power management system

    Heikkilä, M., Karvonen, M., Linjama, M., Tikkanen, S. & Huhtala, K., 2014, ASME/BATH 2014 Symposium on Fluid Power and Motion Control, FPMC2014, September 10-12, 2014, Bath, United Kingdom. The American Society of Mechanical Engineers ASME, p. 1-8 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  46. Published

    Concept of Digital Microhydraulic Valve System Utilising Lamination Technology

    Paloniitty, M., Linjama, M. & Huhtala, K., 2014, Conference Proceedings, 9th International Fluid Power Conference, 24th - 26th March, 2014, Aachen, Germany, Modern Fluid Power - Challenges, Responsibilities, Markets, Vol. 1. Murrenhoff, H. (ed.). Aachen: Hp - Fördervereinigung Fluidtechnik E.v., p. 303-313 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  47. Published

    Digital Hydraulic Power Management System with Five Independent Outlets - Simulation Study of Displacement Controlled Excavator Crane

    Heikkilä, M., Linjama, M. & Huhtala, K., 2014, Conference Proceedings, 9th International Fluid Power Conference 24th - 26th March, Aachen, Germany, Modern Fluid Power - Challenges, Responsibilities, Markets, Vol. 1. Murrenhoff, H. (ed.). Aachen: Hp - Fördervereinigung Fluidtechnik E.v., p. 455-465 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  48. Published

    Digital Hydraulic System

    Sipola, A., Vihtanen, H-P., Linjama, M. & Laamanen, A., 2014, Patent No. Australian Patent Office, AU 2009300985 B2, Priority date 8 May 2014, Priority No. (31) 20085958 : (21) 2009300985

    Research output: PatentScientific

  49. Published

    Digital Microhydraulics

    Laamanen, A. & Linjama, M., 2014, Tampere: FIMECC Oy. 4 p. (FIMECC Publications Series; no. 2)

    Research output: Book/ReportCommissioned reportProfessional

  50. Published

    Equal coded digital hydraulic valve system - improving tracking control with pulse frequency modulation

    Paloniitty, M., Linjama, M. & Huhtala, K., 2014, The Second International Conference on Dynamics and Vibroacoustics of Machines, September 15-17, 2014, Samara, Russia. p. 618-626 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  51. Published

    Inspections on Control Performance of a Digital Hydraulic Power Management System Supplying Digital and Proportional Valve Driven Multi-Actuator System

    Karvonen, M., Heikkilä, M., Huova, M., Linjama, M. & Huhtala, K., 2014, Conference Proceedings, 9th International Fluid Power Conference, 24th - 26th March, Aachen, Germany, Modern Fluid Power - Challenges, Responsibilities, Markets, Vol. 1. Murrenhoff, H. (ed.). Aachen: Hp - Fördervereinigung Fluidtechnik E.v., p. 531-541 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  52. Published

    Mechatronic design of digital hydraulic micro valve package

    Linjama, M., Paloniitty, M., Tiainen, L. & Huhtala, K., 2014, The Second International Conference on Dynamics and Vibroacoustics of Machines, September 15-17, 2014, Samara, Russia. p. 610-617 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  53. Published

    Parallel pump-controlled multi-chamber cylinder

    Niemi-Pynttäri, O., Linjama, M., Laamanen, A. & Huhtala, K., 2014, ASME/BATH 2014 Symposium on Fluid Power and Motion Control, FPMC2014, September 10-12, 2014, Bath, United Kingdom. The American Society of Mechanical Engineers ASME, p. 1-9 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  54. Published

    Verification and Validation of a Pressure Control Unit for Hydraulic Systems

    Boström, P., Heikkilä, M., Huova, M., Waldén, M. & Linjama, M., 2014, 6th International Workshop, SERENE 2014, Budapest, Hungary, October 15-16, 2014. Springer International Publishing, p. 101-115 15 p. (Lecture Notes in Computer Science; vol. 8785).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  55. 2013
  56. Published

    Verfahren und hydraulische Steueranordnung zur Ansteuerung eines Verbrauchers

    Stamm, E., Försterling, H., Huova, M., Siivonen, L. & Linjama, M., 2 Oct 2013, Patent No. DE 102012006219 A1

    Research output: PatentScientific

  57. Published

    Digitaalihydrauliikan seminaarin satoa Tampereella

    Linjama, M., 2013, In : Fluid Finland. 12, 1, p. 8-8 1 p.

    Research output: Contribution to journalArticleProfessional

  58. Published

    Displacement control of a mobile crane using a digital hydraulic power management system

    Heikkilä, M. & Linjama, M., 2013, In : Mechatronics. 23, 4, p. 452-461 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  59. Published

    Energy Efficiency of Digital Hydraulic Valve Control Systems

    Huova, M., Linjama, M. & Huhtala, K., 2013, SAE 2013 Commercial Vehicle Engineering Congress (COMVEC), October 1-3, 2013, Rosemont, Illinois, USA. 13 p. (SAE Technical Papers).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  60. Published

    Fault-tolerant scheduling of stateful tasks in uniprocessor real-time systems

    Alexeev, P., Boström, P., Walden, M., Huova, M., Linjama, M. & Sere, K., 2013, 3rd International Conference on Pervasive Embedded Computing and Communication Systems, PECCS 2013, Barcelona, Spain, 19.-21.2.2013. Benavente-Peces, C. & Filipe, J. (eds.). SCITEPRESS, p. 189-194 6 p. (International Conference on Pervasive Embedded Computing and Communication Systems).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  61. Published

    Hydraulic Energy Recovery in Displacement Controlled Digital Hydraulic System

    Heikkilä, M. & Linjama, M., 2013, Proceedings of the 13th Scandinavian International Conference on Fluid Power, 3-5 June, Linköping, Sweden. Scandinavian International Conference on Fluid Power, p. 1-7 7 p. (Scandinavian International Conference on Fluid Power).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  62. Published

    New energy efficient solutions to mobile machines

    Huhtala, K., Ahopelto, M., Heikkilä, M., Backas, J., Tammisto, J., Huova, M. & Linjama, M., 2013, The 8th International Conference on Fluid Power Transmission and Control, ICFP 2013, April 9-11, 2013, Zhejiang University, Hangzhou, China. Yongxiang, L., Qingfeng, W., Bingfeng, J. & Jun, Z. (eds.). p. 38-52 15 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  63. 2012
  64. Published

    Detecting of faults in a valve system and a fault tolerant control

    Siivonen, L. & Linjama, M., 2012, Patent No. Pat. US 8215227 B2, Priority date 10 Jul 2012, Priority No. (21) 11/991559;(30) FI 20055479

    Research output: PatentScientific

  65. Published

    Digital Hydraulic Pressure Relief Function

    Ketonen, M., Huova, M., Heikkilä, M., Linjama, M., Boström, P. & Walden, M., 2012, Fluid Power and Motion Control, FPMC 2012, University of Bath, UK. Johnston, D. N. & Plummer, A. R. (eds.). Bath, United Kingdom: Centre for Power Transmission and Motion Control, University of Bath, ASME, p. 137-150 (Bath/ASME Symposium on Fluid Power and Motion Control).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  66. Published

    Discussion: Is the future of fluid power digital? Response

    Linjama, M., Scheidl, R. & Schmidt, S., 2012, In : Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering. 226, I6, p. 726-727

    Research output: Contribution to journalArticleScientific

  67. Published

    Energy efficient digital hydraulic valve control utilizing pressurized tank line

    Huova, M. & Linjama, M., 2012, Proceedings of the 8th International Fluid Power Conference Dresden, March 26-28, 2012. Dresden: Technische Universutät Dresden, Dresdner Verein zur Förderung der Fluidtechnik, p. 111-122 12 p. (International Fluid Power Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  68. Published

    Fundamentals of Digital Microhydraulic

    Linjama, M., 2012, Proceedings of the 8th International Fluid Power Conference, Dresden, March 26-28, 2012. Dresden: Technische Universität Dresden, Institute of Fluid Power, p. 385-396 (International Fluid Power Conference; vol. 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  69. Published

    Hydrauliikan aika ei ole ohi - The time of hydraulics is not over

    Linjama, M., 2012, In : Fluid Finland. 11, 2, p. 10-12

    Research output: Contribution to journalArticleProfessional

  70. Published

    Improving damping characteristics of displacement controlled digital hydraulic system

    Heikkilä, M. & Linjama, M., 2012, DFP 12, Proceedings of the fifth workshop on digital fluid power, October 24-25, 2012, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). Tampere: Tampere University of Technology. Department of Intellidgent Hydraulics and Automation, p. 75-88 (Workshop on digital fluid power).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  71. Published

    Is the future of fluid power digital?

    Scheidl, R., Linjama, M. & Schmidt, S., 2012, In : Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering. 226, 6, p. 721-723

    Research output: Contribution to journalArticleScientificpeer-review

  72. Published

    Laminated manifold for digital hydraulics - principles, challenges and benefits

    Paloniitty, M., Karvonen, M., Linjama, M. & Tiainen, T., 2012, DFP 12, Proceedings of the fifth workshop on digital fluid power, October 24-25, 2012, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). Tampere: Tampere University of Technology. Department of Intellidgent Hydraulics and Automation, p. 27-42 (Workshop on digital fluid power).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  73. Published

    Modelling of flow characteristics of on/off valves

    Linjama, M., Huova, M. & Karvonen, M., 2012, DFP 12, Proceedings of the fifth workshop on digital fluid power, October 24-25, 2012, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). Tampere: Tampere University of Technology, Department of Intelligent Hydraulics and Automation, p. 209-222 (Workshop on digital fluid power).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  74. Published

    Proceedings of the fifth workshop on digital fluid power, October 24-25, 2012, Tampere, Finland

    Laamanen, A. (ed.) & Linjama, M. (ed.), 2012, Tampere: Tampere University of Technology. Department of Intellidgent Hydraulics and Automation.

    Research output: Book/ReportAnthologyScientificpeer-review

  75. Published

    Simulations with fault-tolerant controller software of a digital valve

    Huova, M., Ketonen, M., Alexeev, P., Boström, P., Linjama, M., Walden, M. & Sere, K., 2012, Proceedings of the fifth workshop on digital fluid power, October 24-25, 2012, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). Tampere: Tampere University of Technology. Department of Intelligent Hydraulics and Automation, p. 223-242 (Digital fluid power).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  76. 2011
  77. Published

    Development of Controllers Using Simulink and Contract-Based Design. Chapter 8

    Boström, P., Huova, M., Olszewska, M., Linjama, M., Heikkilä, M., Sere, K. & Walden, M., 2011, Dependability and Computer Engineering: Concepts for Software-Intensive Systems. Petre, L., Sere, K. & Troubitsyna, E. (eds.). Hershey, PA: IGI Global, p. 151-169

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  78. Published

    Digital fluid power - state of the art

    Linjama, M., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Sairala, H. & Koskinen, K. T. (eds.). Tampere: Scandinavian International Conference on Fluid Power, p. 331-354 (Scandinavian International Conference on Fluid Power SICFP; vol. 12, no. 3).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  79. Published

    Direct connection of digital hydraulic power management system and double acting cylinder - a simulation study

    Heikkilä, M. & Linjama, M., 2011, The Fourth Workshop on Digital Fluid Power, 21st-22nd November, 2011, Linz, Austria. Linz: DFP-Workshops, p. 59-74 (Workshop on Digital Fluid Power; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  80. Published

    Fault Tolerance with digital Hydraulic Valve System

    Siivonen, L., Linjama, M. & Vilenius, M., 2011, The Eight International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 20-22 June 2011, Cardiff, Wales. Northamption: British Institute of Non-destructive Testing, p. 1250-1262 (International Conference on Condition Monitoring and Machinery Failure Prevention Technologies; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  81. Published

    Hydraulic hybrids

    Linjama, M., 2011, GIM - Generic Intelligent Machines, The 4th GIM Scientific Workshop, January 18-19, 2011, Tampere University of Technology, Tampere, Finland. Tampere: Tampere University of Technology, p. 1-1 1 p. (GIM Scientific Workshop; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  82. Published

    Model-based pressure control with digital valve system

    Linjama, M. & Lahtinen, J., 2011, The Fourth Workshop on Digital Fluid Power, 21st-22nd November, 2011, Linz, Austria. Linz: DFP-Workshops, p. 26-38 (Workshop on Digital Fluid Power; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  83. Published

    Recent advancements in miniature valve development

    Karvonen, M., Ketonen, M., Linjama, M. & Puumala, V., 2011, The Fourth Workshop on Digital Fluid Power, 21st-22nd November, 2011, Linz, Austria. Linz: DFP-Workshops, p. 90-103 14 p. (Workshop on Digital Fluid Power; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  84. Published

    Simulation study - improving efficiency in mobile boom by using digital hydraulic power management system

    Karvonen, M., Heikkilä, M., Huova, M., Linjama, M. & Huhtala, K., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Sairala, H. & Koskinen, K. T. (eds.). Tampere: Scandinavian International Conference on Fluid Power, p. 355-368 (Scandinavian International Conference on Fluid Power SICFP; vol. 12, no. 3).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  85. 2010
  86. Published

    A miniature needle valve

    Karvonen, M., Juhola, M., Ahola, V., Söderlund, L. & Linjama, M., 2010, Proceedings of the Third Workshop on Digital Fluid Power, October 13-14 2010, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). p. 61-78

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  87. Published

    Digitaalihydrauliikka tulee!

    Linjama, M., 2010, In : Metsäalan ammattilehti. 5, p. 88-89

    Research output: Contribution to journalArticleProfessional

  88. Published

    Digital flow control unit for controlling amount of water used for binding dust

    Laamanen, A., Anttonen, P. & Linjama, M., 2010, Proceedings of the Third Workshop on Digital Fluid Power, October 13-14 2010, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). p. 119-128

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  89. Published

    Digital hydraulic power management system - towards lossless hydraulics

    Linjama, M. & Huhtala, K., 2010, Proceedings of the Third Workshop on Digital Fluid Power, October 13-14 2010, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). p. 5-22

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  90. Published

    Energy efficiency of three-chamber cylinder with digital valve system

    Huova, M., Laamanen, A. & Linjama, M., 2010, In : International Journal of Fluid Power. 11, 3, p. 15-22

    Research output: Contribution to journalArticleScientificpeer-review

  91. Published

    Energy efficient control of multiactuator digital hydraulic mobile machine

    Huova, M., Karvonen, M., Ahola, V., Linjama, M. & Vilenius, M., 2010, 7th International Fluid Power Conference (7th IFK), 22-24 March 2010, Aachen, Germany. p. 1-12 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  92. Published

    Experimental evaluation of a digital hydraulic power management system

    Heikkilä, M., Tammisto, J., Huova, M., Huhtala, K. & Linjama, M., 2010, Proceedings of the Third Workshop on Digital Fluid Power, October 13-14 2010, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). p. 129-142

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  93. Published

    Experimental evaluation of a piston-type digital pump-motor-transformer with two independent outlets

    Heikkilä, M., Tammisto, J., Huova, M., Huhtala, K. & Linjama, M., 2010, Fluid Power and Motion Control (FPMC 2010), 15-17 September 2010, University of Bath, UK. Johnston, D. N. & Plummer, A. (eds.). p. 83-97

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  94. Published

    Laitteisto, ohjauspiiri ja menetelmä paineen ja tilavuusvirran tuottamiseksi

    Linjama, M., Tammisto, J., Huhtala, K. & Vilenius, M., 2010, Patent No. Pat. FI 121090 B, Priority date 30 Jun 2010, Priority No. (21) FI 20085242

    Research output: PatentScientific

  95. Published

    Matkaraportti: Digitaalihydrauliikan seminaari marraskuisessa Linzissä

    Linjama, M., 2010, In : Fluid Finland. 1/2010, p. 12-14

    Research output: Contribution to journalArticleScientific

  96. Published

    Measured characteristics of an in-line pump with independently controlled pistons

    Tammisto, J., Huova, M., Heikkilä, M., Linjama, M. & Huhtala, K., 2010, 7th International Fluid Power Conference (7th IFK), 22-24 March 2010, Aachen, Germany. p. 1-12 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  97. Published

    Novel bistable hammer valve for digital hydraulics

    Uusitalo, J-P., Ahola, V., Söderlund, L., Linjama, M., Juhola, M. & Kettunen, L., 2010, In : International Journal of Fluid Power. 11, 3, p. 35-44

    Research output: Contribution to journalArticleScientificpeer-review

  98. Published

    Proceedings of the Third Workshop on Digital Fluid Power, October 13-14 2010, Tampere, Finland

    Laamanen, A. (ed.) & Linjama, M. (ed.), 2010, Tampere: Tampere University of Technology.

    Research output: Book/ReportAnthologyScientificpeer-review

  99. 2009
  100. Published

    A novel symmetric and bistable seat valve

    Karvonen, M., Uusitalo, J-P., Ahola, V., Linjama, M. & Vilenius, M., 2009, The 11th Scandinavian International Conference on Fluid Power SICFP'09, Linköping, Sweden, June 2-4 2009. p. 14 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  101. Published

    Contract-based design in controller development and its evaluation

    Boström, P., Plaska, M., Huova, M., Linjama, M., Heikkilä, M., Sere, K. & Walden, M., 2009, Nodes 09: Nordic workshop and doctoral symposium on Dependability and security, Linköping, Sweden, April 27, 2009. Asplund, M., Nadjm-Tehrani, S. & Petre, L. (eds.). p. 21-27

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  102. Published

    Controller design of digital hydraulic flow control valve

    Huova, M., Plaska, M., Siivonen, L., Linjama, M., Walden, M., Vilenius, M. & Sere, K., 2009, The 11th Scandinavian International Conference on Fluid Power SICFP'09, Linköping, Sweden, June 2-4 2009. p. 15 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  103. Published

    Design and implementation of digital hydraulic synchronization and force control system

    Linjama, M., Hopponen, V., Ikonen, A., Rintamäki, P., Vilenius, M. & Pietola, M., 2009, The 11th Scandinavian International Conference on Fluid Power SICFP'09, Linköping, Sweden, June 2-4 2009. p. 13 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  104. Published

    Digitaalisen mikrohydrauliikan sovellussatoa

    Linjama, M., 2009, In : Fluid Finland. 2/2009, p. 30-31

    Research output: Contribution to journalArticleProfessional

  105. Published

    Digital hydraulic pressure control

    Ijas, M., Mäkinen, E. & Linjama, M., 2009, The 11th Scandinavian International Conference on Fluid Power SICFP'09, Linköping, Sweden, June 2-4 2009. p. 12 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  106. Published

    Digital pump-motor with independent outlets

    Linjama, M. & Huhtala, K., 2009, The 11th Scandinavian International Conference on Fluid Power SICFP'09, Linköping, Sweden, June 2-4 2009. p. 16 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  107. Published

    Dynamic analysis of a bistable actuator for digital hydraulics

    Uusitalo, J-P., Söderlund, L., Kettunen, L., Linjama, M. & Vilenius, M., 2009, In : IET Science Measurement and Technology. 3, 3, p. 235-243

    Research output: Contribution to journalArticleScientificpeer-review

  108. Published

    Energy efficient digital hydraulic force control

    Hopponen, V., Linjama, M., Ikonen, A., Rintamäki, P., Pietola, M. & Vilenius, M., 2009, The 11th Scandinavian International Conference on Fluid Power SICFP'09, Linköping, Sweden, June 2-4 2009. p. 11 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  109. Published

    Energy saving digital hydraulics

    Linjama, M., 2009, Proceedings of The Second Workshop on Digital Fluid Power, 12-13 November 2009, Linz, Austria. Scheidl, R. & Winkler, B. (eds.). p. 5-20

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  110. Published

    Jammed on/off valve fault compensation with distributed digital valve system

    Siivonen, L., Linjama, M., Huova, M. & Vilenius, M., 2009, In : International Journal of Fluid Power. 10, 2, p. 73-82

    Research output: Contribution to journalArticleScientificpeer-review

  111. Published

    New alternative for digital pump-motor-transformer

    Linjama, M. & Tammisto, J., 2009, Proceedings of The Second Workshop on Digital Fluid Power, 12-13 November 2009, Linz, Austria. Scheidl, R. & Winkler, B. (eds.). p. 49-61

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  112. Published

    Novel bistable hammer valve for digital hydraulics

    Uusitalo, J-P., Söderlund, L., Kettunen, L., Ahola, V. & Linjama, M., 2009, Proceedings of The Second Workshop on Digital Fluid Power, 12-13 November 2009, Linz, Austria. Scheidl, R. & Winkler, B. (eds.). p. 33-48

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  113. Published

    Quality analysis of simulink models

    Plaska, M., Huova, M., Walden, M., Sere, K. & Linjama, M., 2009, Proceedings of the Conquest 2009. 12th International Conference on Quality Engineering in Software Technology, 16-18 September 2009, Nuremberg, Germany. Schieferdecker, I. & Goericke, S. (eds.). p. 223-240

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  114. Published

    Secondary controlled multi-chamber hydraulic cylinder

    Linjama, M., Vihtanen, H-P., Sipola, A. & Vilenius, M., 2009, The 11th Scandinavian International Conference on Fluid Power SICFP'09, Linköping, Sweden, June 2-4 2009. p. 15 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  115. Published

    Tavoitteena häviötön hydrauliikka

    Linjama, M., 2009, In : Fluid Finland. 3-4, p. 12-17

    Research output: Contribution to journalArticleProfessional

  116. 2008
  117. Published

    Accurate flow control with digital valve system

    Siivonen, L., Linjama, M., Vilenius, M. & Anttonen, P., 2008, Proceedings of the 51st National Conference on Fluid Power March 12-14, 2008, IFPE 2008, Las Vegas, USA. p. 287-294

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  118. Published

    Comparison of digital hydraulic and traditional servo system in demanding water hydraulic tracking control

    Linjama, M., Seppälä, J., Mattila, J. & Vilenius, M., 2008, Fluid Power and Motion Control FPMC 2008, 10-12 September 2008, Bath, UK. Johnston, D. N. & Plummer, A. R. (eds.). p. 393-403

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  119. Published

    Digitaalihydrauliikan kuulumiset

    Linjama, M., 2008, In : Fluid Finland. 2, p. 8-10

    Research output: Contribution to journalArticleProfessional

  120. Published

    Digitaalihydrauliikan seminaarin suosio yllätti

    Linjama, M., 2008, In : Fluid Finland. 3, p. 36-37

    Research output: Contribution to journalArticleProfessional

  121. Published

    Digital hydraulics research at IHA

    Linjama, M., 2008, Proceedings of the First Workshop on Digital Fluid Power 3rd October, 2008, Tampere, Finland. Linjama, M. & Laamanen, A. (eds.). p. 7-30

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  122. Published

    Digital hydraulics - Towards perfect valve technology

    Linjama, M. & Vilenius, M., 2008, In : Ventil - Journal for Hydraulics, Automation and Mechatronics. 14, 2, p. 138-148

    Research output: Contribution to journalArticleScientificpeer-review

  123. Published

    Digital microhydraulics

    Linjama, M. & Karvonen, M., 2008, Proceedings of the First Workshop on Digital Fluid Power 3rd October, 2008, Tampere, Finland. Linjama, M. & Laamanen, A. (eds.). p. 141-152

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  124. Published

    Digital schlägt Analog um 40%

    Linjama, M., 2008, In : Fluid. 7-8/2008, p. 12-13

    Research output: Contribution to journalArticleProfessional

  125. Published

    Online minimization of power losses in distributed digital hydraulic valve system

    Linjama, M., Huova, M. & Vilenius, M., 2008, Proceedings of the 6th International Fluid Power Conference Dresden, Fluid Power in Motion, 6iFK, April 1.-2.2008, Dresden. p. 157-171

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  126. Published

    Proceedings of the First Workshop on Digital Fluid Power 3rd October, 2008 Tampere, Finland

    Linjama, M. (ed.) & Laamanen, A. (ed.), 2008, Tampere University of Technology.

    Research output: Book/ReportAnthologyScientificpeer-review

  127. 2007
  128. Published

    Fault-Tolerant Control of EHA With Digital Hydraulic Valve System

    Siivonen, L., Aaltonen, J., Linjama, M. & Vilenius, M., 13 Jul 2007, Recent Advances in Aerospace Actuation Systems and Components. Toulouse, France: Institut National des Sciences Appliquées, p. 115-119 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  129. Published

    Design and implementation of energy saving digital hydraulic control system

    Linjama, M., Huova, M., Boström, P., Laamanen, A., Siivonen, L., Morel, L., Walden, M. & Vilenius, M., 2007, The Tenth Scandinavian International Conference on Fluid Power, May 21-23, 2007, Tampere, Finland, SICFP'07. Vilenius, J. & Koskinen, K. T. (eds.). Tampere: Tampere University of Technology, p. 341-359

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  130. Published

    Design and validation of digital controllers for hydraulics systems

    Boström, P., Linjama, M., Morel, L., Siivonen, L. & Walden, M., 2007, The Tenth Scandinavian International Conference on Fluid Power, May 21-23, 2007, Tampere, Finland, SICFP'07. Vilenius, J. & Koskinen, K. T. (eds.). Tampere: Tampere University of Technology, p. 227-241

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  131. Published

    Digital hydraulics - Towards perfect valve technology

    Linjama, M. & Vilenius, M., 2007, The Tenth Scandinavian International Conference on Fluid Power, May 21-23, 2007, Tampere, Finland, SICFP'07. Vilenius, J. & Koskinen, K. T. (eds.). Tampere: Tampere University of Technology, p. 181-196

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  132. Published

    Fault detection and diagnosis of digital hydraulic valve system

    Siivonen, L., Linjama, M., Huova, M. & Vilenius, M., 2007, The Tenth Scandinavian International Conference on Fluid Power, May 21-23, 2007, Tampere, Finland, SICFP'07. Vilenius, J. & Koskinen, K. T. (eds.). Tampere: Tampere University of Technology, p. 211-226

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  133. Published

    High performance digital hydraulic servo system for linear cyclic motion

    Ahola, V., Linjama, M. & Vilenius, M., 2007, The Tenth Scandinavian International Conference on Fluid Power, May 21-23, 2007, Tampere, Finland, SICFP'07. Vilenius, J. & Koskinen, K. T. (eds.). Tampere: Tampere University of Technology, p. 275-287

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  134. Published

    Improving characteristics of on/off solenoid valves

    Mikkola, J., Ahola, V., Lauttamus, T., Luomaranta, M., Linjama, M. & Vilenius, M., 2007, The Tenth Scandinavian International Conference on Fluid Power, May 21-23, 2007, Tampere, Finland, SICFP'07. Vilenius, J. & Koskinen, K. T. (eds.). Tampere: Tampere University of Technology, p. 343-353

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  135. Published

    ITER divertor maintenance: Development of a control system for the remote handling of the divertor cassette mover

    Esque, S., Saarinen, H., Muhammad, A., Zhai, L., Tammisto, J., Seppälä, J., Mattila, J., Virvalo, T., Linjama, M. & Vilenius, M., 2007, Proceedings of the 22nd IEEE/NPSS Symposium on Fusion Engineering - SOFE 07, June 17-21, Albuquerque, New Mexico, USA. p. 6 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  136. Published

    Miniaturized bistable seat valve

    Uusitalo, J-P., Lauttamus, T., Linjama, M., Söderlund, L., Vilenius, M. & Kettunen, L., 2007, The Tenth Scandinavian International Conference on Fluid Power, May 21-23, 2007, Tampere, Finland, SICFP'07. Vilenius, J. & Koskinen, K. T. (eds.). Tampere: Tampere University of Technology, p. 379-391

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  137. Published

    On stability and dynamic characteristics of hydraulic drives with distributed valves

    Linjama, M., Huova, M. & Vilenius, M., 2007, Power Transmission and Motion Control (PTMC 2007), University of Bath, UK, 12-14 September 2007. Johnston, D. N. & Plummer, A. R. (eds.). p. 297-314

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  138. Published

    On the pressure peak minimization in digital hydraulics

    Laamanen, A., Linjama, M. & Vilenius, M., 2007, The Tenth Scandinavian International Conference on Fluid Power, May 21-23, 2007, Tampere, Finland, SICFP'07. Vilenius, J. & Koskinen, K. T. (eds.). Tampere: Tampere University of Technology, p. 107-121 15 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  139. Published

    Pressure based fault detection and diagnosis of a digital valve system

    Siivonen, L., Linjama, M., Huova, M. & Vilenius, M., 2007, Power Transmission and Motion Control (PTMC 2007), University of Bath, UK, 12-14 September 2007. Johnston, D. N. & Plummer, A. R. (eds.). p. 67-79

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  140. 2006
  141. Published

    A control system and a method for controlling an actuator and for optimizing the control by means of sets of valves coupled in parallel

    Linjama, M., 2006, Patent No. Pat. EP 1386083 B1, Priority date 30 Aug 2006, Priority No. (21) 02716861.6 (30) FI 20010827

    Research output: PatentScientific

  142. Published

    A novel seat valve with reduced axial forces

    Lauttamus, T., Linjama, M., Nurmia, M. & Vilenius, M., 2006, Power Transmission and Motion Control, PTMC 2006, University of Bath, UK, 13-15 September 2006. Johnston, D. N. & Edge, K. A. (eds.). p. 415-427

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  143. Published

    Digitaalihydrauliikka

    Linjama, M., 2006, In : Fluid Finland. 5, 1, p. 14-19

    Research output: Contribution to journalArticleProfessional

  144. Published

    Fault tolerance of digital hydraulic valve system with separately controlled flow paths

    Siivonen, L., Linjama, M. & Vilenius, M., 2006, Proceedings of the 4th FPNI - PhD Symposium, Sarasota 2006, June 13-17, 2006, Sarasota, FL, USA. Ivantysynova, M. (ed.). p. 331-343

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  145. Published

    The effect of coding method on pressure peaks in digital hydraulic system

    Laamanen, A., Linjama, M. & Vilenius, M., 2006, Proceedings of the 4th FPNI - PhD Symposium, Sarasota 2006, June 13-17, 2006, Sarasota, FL, USA. Ivantysynova, M. (ed.). p. 285-295

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  146. 2005
  147. Published

    Analysis of fault tolerance of digital hydraulic valve system

    Siivonen, L., Linjama, M. & Vilenius, M., 2005, Bath Workshop on Power Transmission and Motion Control (PTMC 2005), 7-9 September 2005. Johnston, D. N., Burrows, C. R. & Edge, K. A. (eds.). p. 133-146

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  148. Published

    Digital hydraulic tracking control of mobile machine joint actuator mockup

    Linjama, M. & Vilenius, M., 2005, Proceedings of the Ninth Scandinavian International Conference on Fluid Power, SICFP'05, June 1.-3, 2005, Linköping, Sweden. p. 16 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  149. Published

    Energy-efficient motion control of a digital hydraulic joint actuator

    Linjama, M. & Vilenius, M., 2005, Proceedings of the 6th JFPS International Symposium on Fluid Power, November 7-10, 2005, Tsukuba, Japani. p. 640-645

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  150. Published

    Improved digital hydraulic tracking control of water hydraulic cylinder drive

    Linjama, M. & Vilenius, M., 2005, In : International Journal of Fluid Power. 6, 1, p. 29-39

    Research output: Contribution to journalArticleScientificpeer-review

  151. Published

    Low-order robust controller for flexible hydraulic manipulators

    Linjama, M. & Virvalo, T., 2005, Bath Workshop on Power Transmission and Motion Control (PTMC 2005), 7-9 September 2005. Johnston, D. N., Burrows, C. R. & Edge, K. A. (eds.). p. 29-43

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  152. Published

    Performance of the valvistor with digital hydraulic pilot control

    Linjama, M., Tamminen, P., Andersson, B. & Vilenius, M., 2005, Proceedings of the Ninth Scandinavian International Conference on Fluid Power, SICFP'05, June 1.-3, 2005, Linköping, Sweden. p. 14 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  153. Published

    Pressure peak phenomenon in digital hydraulic systems - a theoretical study

    Laamanen, A., Linjama, M. & Vilenius, M., 2005, Bath Workshop on Power Transmission and Motion Control (PTMC 2005), 7-9 September 2005. Johnston, D. N., Burrows, C. R. & Edge, K. A. (eds.). p. 91-104 14 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  154. Published

    The effect of fluid visconsity on performance of proportional directional valve and digital flow control unit

    Siivonen, L., Linjama, M. & Vilenius, M., 2005, Proceedings of the Ninth Scandinavian International Conference on Fluid Power, SICFP'05, June 1.-3, 2005, Linköping, Sweden. p. 13 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  155. 2004
  156. Published

    Digital flow control unit-an alternative for a proportional valve?

    Laamanen, A., Siivonen, L., Linjama, M. & Vilenius, M., 2004, Bath Workshop on Power Transmission and Motion Control (PTMC 2004). p. 297-308

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  157. Published

    Digital hydraulic control of a mobile machine joint actuator mockup

    Linjama, M. & Vilenius, M., 2004, Bath Workshop on Power Transmission and Motion Control (PTMC 2004). p. 145-158

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  158. Published

    Digital Hydraulics - Past and Future

    Laamanen, A., Linjama, M. & Vilenius, M., 2004, Second Arctic-Mediterranean Post Graduate Workshop on Intelligent Machines and Transport Systems Proceedings, March 13- 21, 2004, Oulu-Kiruna-Narvik. p. 6 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  159. Published

    PCM Control in Mobile Hydraulics

    Laamanen, A., Linjama, M. & Vilenius, M., 2004, Proceedings of the 3rd FPNI-PhD Symposium on Fluid Power, Terrassa Spain, June 30-July 2, 2004. Codina Macia, E. (ed.). p. 311-320

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  160. 2003
  161. Published

    Accurate trajectory tracking control of water hydraulic cylinder with non-ideal on/off valves

    Linjama, M., Koskinen, K. T. & Vilenius, M., 2003, In : International Journal of Fluid Power. 4, 1, p. 7-16

    Research output: Contribution to journalArticleScientificpeer-review

  162. Published

    A New Simulation Platform for Mechanical and Hydraulic Hybrid System-Especially for Hydraulic Manipulators

    Sun, W., Linjama, M. & Virvalo, T., 2003, 1st International Conference on Computational Method in Fluid Power Technology, Methods for solving practical problems in Design and Control 26-28 November 2003, Melbourne, Australia. Stecki, J. S. (ed.). p. 271-280

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  163. Published

    Characteristics of a Digital Flow Control Unit with PCM Control

    Laamanen, A., Linjama, M. & Vilenius, M., 2003, 7th Triennial International Symposium on Fluid Control, Measurement and Visualization, Sorrento, Italy, August 25-28.2003. Edinburgh, UK: Optimage Ltd., Edinburgh, UK, EH10 5PJ, p. 16 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  164. Published

    Is it time for digital hydraulics?

    Linjama, M., Laamanen, A. & Vilenius, M., 2003, The Eight Scandinavian International Conference on Fluid Power, Proceedings of the Conference, May 7-9, 2003, Tampere, Finland, SICFP´03. Koskinen, K. T. & Vilenius, M. (eds.). Tampere: Tampere University of Technology, p. 347-366

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  165. Published

    Low-pressure water hydraulics vs. pneumatics - performance, efficiency and investments, a case study

    Linjama, M., Mäkinen, E., Virvalo, T. & Koskinen, K. T., 2003, The Eight Scandinavian International Conference on Fluid Power, Proceedings of the Conference, May 7-9, 2003, Tampere, Finland, SICFP´03. Koskinen, K. T. & Vilenius, M. (eds.). Tampere: Tampere University of Technology, p. 1003-1019

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  166. Published

    Two different control methods for digital flow control unit

    Laamanen, A., Nurmia, M., Linjama, M., Koskinen, K. T. & Vilenius, M., 2003, The Eight Scandinavian International Conference on Fluid Power, Proceedings of the Conference, May 7-9, 2003, Tampere, Finland, SICFP´03. Koskinen, K. T. & Vilenius, M. (eds.). Tampere: Tampere University of Technology, p. 887-898

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  167. Published

    Water Hydraulic Motion Control - Control Valves and Methods

    Lakkonen, M., Linjama, M., Koskinen, K. T. & Vilenius, M., 2003, First Arctic-Mediterranean Post Graduate Workshop on Intelligent Machines and Transport Systems Proceedings, vol. 1. Montpellier, Ranska, p. 7 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  168. 2002
  169. Published

    Adaptive on/off position control of low-pressure water hydraulic cylinder

    Linjama, M., Koskinen, K. T. & Vilenius, M., 2002, Proceedings of the 3rd International Fluid Power Conference, March 5th and 6th 2002, Aachen, Germany. p. 303-314

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  170. Published

    Cavitation Resistant Water Hydraulic Pressure Relief Valve

    Liukkunen, T., Nurmia, M., Linjama, M., Koskinen, K. T. & Vilenius, M., 2002, Proceedings of the 3rd International Fluid Power Conference, March 5th and 6th 2002, Aachen, Germany. p. 255-266

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  171. Published

    Digitaalihydrauliikka voi tulevaisuudessa korvata analogiventtiilit

    Linjama, M. & Vilenius, M., 2002, In : Metsä Forest, Hydrauliikka-liite. 1/2002, p. 1 s

    Research output: Contribution to journalArticleProfessional

  172. Published

    Experimental Study on Cavitation in Water Hydraulic Poppet Valve

    Oshima, S., Leino, T., Linjama, M., Koskinen, K. T. & Vilenius, M., 2002, In : Transactions of the Japan Fluid Power System Society. 33, 2, p. 29-35

    Research output: Contribution to journalArticleScientificpeer-review

  173. Published

    High-Speed On/Off Position Control of a Low-Pressure Water Hydraulic Cylinder Drive

    Linjama, M., Sairiala, H., Koskinen, K. T. & Vilenius, M., 2002, Proceedings of the 49th National Conference on Fluid Power, March 19-21, 2002, Las Vegas, USA. USA, p. 217-225

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  174. Published

    High-Speed On/Off Position Control of a Low-Pressure Water Hydraulic Cylinder Drive

    Linjama, M., Sairiala, H., Koskinen, K. T. & Vilenius, M., 2002, In : SAE Technical Papers. p. 8 s

    Research output: Contribution to journalArticleScientificpeer-review

  175. Published

    Modelling of a Water Hydraulic Poppet Valve Using CFD Technique

    Leino, T., Linjama, M., Koskinen, K. T. & Vilenius, M., 2002, Proceedings of the 2nd International FPNI PhD Symposium on Fluid Power, Modena, Italy, July 3-6, 2002. Italy, p. 4 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  176. Published

    Proportional Position Control of Low-Pressure Water Hydraulic Cylinder

    Sairiala, H., Linjama, M., Koskinen, K. T. & Vilenius, M., 2002, In : SAE Technical Papers. p. 7 s

    Research output: Contribution to journalArticleScientificpeer-review

  177. Published

    Proportional Position Control of Low-Pressure Water Hydraulic Cylinder

    Sairiala, H., Linjama, M., Koskinen, K. T. & Vilenius, M., 2002, Proceedings of the 49th National Conference on Fluid Power, March 19-21, 2002, Las Vegas, USA. USA, p. 227-234

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  178. Published

    Proportional Velocity Control of Low-Pressure Water Hydraulic Cylinder Drive

    Sairiala, H., Linjama, M., Koskinen, K. T. & Vilenius, M., 2002, Proceedings of the 5th JFPS International Symposium on Fluid Power, Nara 2002, November 13, 2002. Japan, p. 181-186

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  179. Published

    Pseudo-Proportional Position Control of Water Hydraulic Cylinder Using On/Off Valves

    Linjama, M., Koskinen, K. T. & Vilenius, M., 2002, Proceedings of the 5th JFPS International Symposium on Fluid Power, Nara 2002, November 13, 2002. Japan, p. 155-160

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  180. Published

    Sliding mode tracking control of a low-pressure water hydraulic cylinder under non-linear friction

    Cho, S. H., Linjama, M., Sairiala, H., Koskinen, K. T. & Vilenius, M., 2002, In : Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering. 216, p. 383-392

    Research output: Contribution to journalArticleScientificpeer-review

  181. Published

    Velocity Control of Water Hydraulic Motor

    Laamanen, A., Linjama, M., Tammisto, J., Koskinen, K. T. & Vilenius, M., 2002, Proceedings of the 5th JFPS nternational Symposium on Fluid Power, Nara 2002, November 13, 2002. Japan, p. 167-172

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  182. 2001
  183. Published

    Applicability of a laminar flow based model in pipeflow modelling of water hydraulic systems

    Leino, T., Linjama, M., Koskinen, K. T. & Vilenius, M., 2001, In : International Journal of Fluid Power. 2, 2, p. 37-46

    Research output: Contribution to journalArticleScientificpeer-review

  184. Published

    Effect of cavitation in water hydraulic poppet valves

    Oshima, S., Leino, T., Linjama, M., Koskinen, K. T. & Vilenius, M. J., 2001, In : International Journal of Fluid Power. 2, 3, p. 5-14

    Research output: Contribution to journalArticleScientificpeer-review

  185. Published

    Experimental study of robustness of some controllers in a hydraulic position servo drive

    Virvalo, T. & Linjama, M., 2001, Sbornik konference, Hydraulika a Pneumatika, June 5-6, 2001, Ostrava, Czech Republic. p. 199-208

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  186. Published

    Guidelines for design of low-pressure water hydraulic systems

    Linjama, M., Laamanen, A., Koskinen, K. T. & Vilenius, M., 2001, Tampere: Tampere University of Technology. 62 p. (Tampere University of Technology, IHA, report; no. 85)

    Research output: Book/ReportCommissioned reportProfessional

  187. Published

    High-precision On/Off position control of low-pressure water hydraulic cylinder

    Linjama, M., Oshima, S., Koskinen, K. T. & Vilenius, M., 2001, The Seventh Scandinavian International Conference on Fluid Power, SICFP´01, Linköping, Sweden, May 30 - June 1, 2001. p. 41-54

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  188. Published

    Low-cost proportional valve for low-pressure water hydraulics

    Sairiala, H., Linjama, M., Koskinen, K. T. & Vilenius, M., 2001, Bath Workshop on Power Transmission and Motion Control (PTMC 2001). Burrows, C. R. & Edge, K. A. (eds.). p. 135-145

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  189. Published

    Motion control of low-pressure water hydraulic systems

    Linjama, M., Tammisto, J., Sairiala, H., Koskinen, K. & Vilenius, M., 2001, Tampere: Tampere University of Technology. 91 p. (Tampere University of Technology, IHA, report; no. 83)

    Research output: Book/ReportCommissioned reportProfessional

  190. Published

    Robustness of some low-order controllers in an electrohydraulic position servo drive

    Linjama, M. & Virvalo, T., 2001, Bath Workshop on Power Transmission and Motion Control (PTMC 2001). Burrows, C. R. & Edge, K. A. (eds.). p. 309-323

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  191. Published

    Two physical phenomena in water hydraulic systems

    Leino, T., Linjama, M., Koskinen, K. & Vilenius, M., 2001, Tampere: Tampere University of Technology. 44 p. (Tampere University of Technology, IHA, report; no. 82)

    Research output: Book/ReportCommissioned reportProfessional

  192. 2000
  193. Published

    Applicability of pneumatic cylinders in low-pressure water hydraulics

    Lakkonen, M., Linjama, M., Koskinen, K. & Vilenius, M., 2000, Lubricants for Off-Highway Applications. USA: SAE International, p. 61-66

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  194. Published

    Experimental study on dynamics of turbulent pipeline flow

    Leino, T., Koskinen, K., Linjama, M. & Vilenius, M., 2000, Proceedings. Sixth Triennal International Symposium on Fluid Control, Measurement and Visualization, FLUCOME 2000, August 13-17, 2000, Sherbrooke, Canada. Laneville, A. (ed.). p. 5 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  195. Published

    Hardware-in-the-loop environment for servo system controller design, tuning and testing

    Linjama, M., Virvalo, T., Gustafsson, J., Lintula, J., Aaltonen, V. & Kivikoski, M., 2000, In : Microprocessors and Microsystems. 24, 1, p. 13-23

    Research output: Contribution to journalArticleScientificpeer-review

  196. Published

    Hardware-in-the-Loop simulation applied on distributed control of hydraulic cylinder drives

    Linjama, M., Virvalo, T., Aaltonen, V. & Kivikoski, M., 2000, 2. Internationales Fluidtechnisches Kolloquium in Dresden, 16.-17.3.2000, Dresden, Germany. Conference Book.. Dresden, p. 425-435

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  197. Published

    On/off position control of low-pressure water hydraulic cylinder using low-cost valves

    Linjama, M., Koskinen, K., Tammisto, J. & Vilenius, M., 2000, Proceedings. Sixth Triennal International Symposium on Fluid Control, Measurement and Visualization, FLUCOME 2000, August 13-17, 2000, Sherbrooke, Canada. Laneville, A. (ed.). p. 6 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  198. Published

    On/off position control of low-pressure water hydraulic cylinder with two-way solenoid valves

    Linjama, M., Koskinen, K. T. & Vilenius, M., 2000, Tampere: Tampere University of Technology. 34 p. (Tampere University of Technology, Institute of Hydraulics and Automation, IHA, report; no. 78)

    Research output: Book/ReportCommissioned reportProfessional

  199. Published

    Suppression of pressure transients in on/off control of low-pressure water hydraulic cylinder

    Linjama, M., Koskinen, K. & Vilenius, M., 2000, Bath Workshop on Power Transmission and Motion Control (PTMC 2000). Burrows, C. R. & Edge, K. A. (eds.). p. 199-212

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  200. Published

    Two-way solenoid valves in low-pressure water hydraulics

    Linjama, M., Koskinen, K., Tammisto, J. & Vilenius, M., 2000, Fluid Power Systems and Technology 2000. The 2000 ASME International Mechanical Engineering Congress and Exposition, November 5-10, 2000, Orlando, Florida, USA. McLain, T. & Kim, D. (eds.). USA, p. 55-60

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  201. Published

    User friendly environment for the R&D of controllers in heavy machinery

    Virvalo, T., Linjama, M., Aaltonen, V. & Kivikoski, M., 2000, Proceedings of the International Conference on Machine Automation, ICMA2000, Human Friendly Mechatronics, September 27-29, 2000, Osaka Institute of Technology, Osaka, Japan. Japani, p. 213-218

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  202. Published

    User friendly environment for the R&D of controllers in heavy machinery

    Virvalo, T., Linjama, M., Aaltonen, V. & Kivikoski, M., 2000, Human Friendly Mechatronics, Selected Papers of the International Conference on Machine Automation ICMA2000, September 27-29, 2000, Osaka, Japan. p. 359-364

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  203. 1999
  204. Published

    Analysis of multi-input multi-output nature of hydraulic cranes

    Linjama, M. & Virvalo, T., 1999, Bath Workshop on Power Transmission and Motion Control (PTMC 99), 8-10 September, 1999, Bath, United Kingdom. Burrows, C. R. & Edge, K. A. (eds.). p. 15-29

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  205. Published

    Compensation of the null point drift of a hydraulic servo valve in a position servo application

    Virvalo, T. & Linjama, M., 1999, Proceedings of the 3rd International Symposium on Fluid Power Transmission and Control, September 7-9, 1999, Harbin, China. p. 259-263

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  206. Published

    Feasibility study of existing low-pressure water hydraulic components

    Laakso, M., Myllykylä, J., Tammisto, J., Linjama, M., Koskinen, K. T. & Vilenius, M., 1999, Tampere: Tampere University of Technology. 23 p. (Tampere University of Technology, Institute of Hydraulics and Automation, IHA, Report; no. 73)

    Research output: Book/ReportCommissioned reportProfessional

  207. Published

    Low-order dynamic model for flexible hydraulic cranes

    Linjama, M. & Virvalo, T., 1999, In : Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering. 213, I1, p. 11-22

    Research output: Contribution to journalArticleScientificpeer-review

  208. Published

    Low-Pressure Water Hydraulic Component Tests, Part I

    Myllykylä, J., Laakso, M., Lakkonen, M., Liukkunen, T., Tammisto, J., Einola, K., Soini, S., Linjama, M., Koskinen, K. T. & Vilenius, M., 1999, Tampere: Tampere University of Technology. 68 p. (Tampere University of Technology, Institute of Hydraulics and Automation, IHA, Report; no. 76)

    Research output: Book/ReportCommissioned reportProfessional

  209. Published

    State-Space Model for Control Design of Multi-Link Flexible Hydraulic Cranes

    Linjama, M. & Virvalo, T., 1999, Proceedings of The Sixth Scandinavian International Conference on Fluid Power, May 26 - 28, 1999, Tampere, Finland. Koskinen, K. T., Vilenius, M. & Tikka, K. (eds.). Tampere, p. 981-998

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  210. Published

    The Influence of Control Valves on the Efficiency of a Hydraulic Crane

    Liang, X., Virvalo, T. & Linjama, M., 1999, Proceedings of The Sixth Scandinavian International Conference on Fluid Power, May 26 - 28, 1999, Tampere, Finland. Koskinen, K. T., Vilenius, M. & Tikka, K. (eds.). Tampere, p. 381-394

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  211. 1998
  212. Published

    Modeling of interaction between hydraulic circuit and flexible robot mechanism

    Linjama, M. & Virvalo, T., 1998, Proceedings - The Fourth International Conference on Motion and Vibration Control MOVIC, August 25-28, 1998, ETH Zurich, Switzerland. Schweitzer, G. (ed.). p. 1115-1120

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  213. Published

    The Modeling and Actuator Space Control of Flexible Hydraulic Cranes

    Linjama, M., 1998, Helsinki: The Finnish Academy of Technology. 110 p. (Acta Polytechnica Scandinavica, Me; no. 129)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  214. 1997
  215. Published

    A computed force controller in a pneumatic position servo

    Virvalo, T., Linjama, M. & Mattila, J., 1997, New Achievements and Ideals in Fluid Power Engineering, Proceedings of the 4th International Conference on Fluid Power Transmission and Control, '97 ICFP, September 9-11, Hangzhou, China. Yongxiang, L. & Yiyuan, G. (eds.). Beijing: International Academic Publishers, p. 327-330

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  216. Published

    Comparing different controllers of an electrohydraulic position servo

    Virvalo, T., Linjama, M. & Mattila, J., 1997, New Achievements and Ideals in Fluid Power Engineering, Proceedings of the 4th International Conference on Fluid Power Transmission and Control, '97 ICFP, September 9-11, Hangzhou, China. Yongxiang, L. & Yiyuan, G. (eds.). Beijing: International Academic Publishers, p. 215-219

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  217. Published

    Dynamic properties of a flexible hydraulic crane

    Linjama, M. & Virvalo, T., 1997, New Achievements and Ideals in Fluid Power Engineering, Proceedings of the 4th International Conference on Fluid Power Transmission and Control, '97 ICFP, September 9-11, Hangzhou, China. Yongxiang, L. & Yiyuan, G. (eds.). Beijing: International Academic Publishers, p. 436-441

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  218. Published

    Modelling of a flexible hydraulic crane

    Linjama, M. & Virvalo, T., 1997, The Fifth Scandinavian International Conference on Fluid Power, SICFP 97, Linköping, Sweden, 28-30 May 1997. p. 33-48

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  219. 1996
  220. Published

    Aseman säätö hydraulisissa puomeissa

    Linjama, M., 1996, Tampere: Tampere University of Technology. 34 p. (Tampere University of Technology, Institute of Hydraulics and Automation, IHA, Report; no. 50)

    Research output: Book/ReportCommissioned reportProfessional

  221. Published

    Modelling of Flexible Hydraulic Manipulators

    Linjama, M., 1996, Tampere: Tampere University of Technology. 25 p. (Tampere University of Technology, Institute of Hydraulics and Automation, IHA, Report; no. 51)

    Research output: Book/ReportCommissioned reportProfessional

  222. 1995
  223. Published

    Compensation of elasticity in one-link hydraulic boom

    Linjama, M., Virvalo, T. & Vilenius, M., 1995, Proceedings of The Fourth Scandinavian International Conference on Fluid Power, September 26-29, Tampere, Finland. p. 1116-1127

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  224. 1993
  225. Published

    Opas markkinatiedon lähteille

    Linjama, M., 1993, Tampere: Tampereen teknillinen korkeakoulu. 69 p. (Tampereen teknillinen korkeakoulu, Teollisuustalous, Raportteja ja työpapereita; no. 1/1993)

    Research output: Book/ReportCommissioned reportProfessional

ID: 39448