Tampere University of Technology

TUTCRIS Research Portal

Matti Linjama

  1. Published

    Accurate flow control with digital valve system

    Siivonen, L., Linjama, M., Vilenius, M. & Anttonen, P., 2008, Proceedings of the 51st National Conference on Fluid Power March 12-14, 2008, IFPE 2008, Las Vegas, USA. p. 287-294

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  2. Published

    Accurate trajectory tracking control of water hydraulic cylinder with non-ideal on/off valves

    Linjama, M., Koskinen, K. T. & Vilenius, M., 2003, In : International Journal of Fluid Power. 4, 1, p. 7-16

    Research output: Contribution to journalArticleScientificpeer-review

  3. Published

    A computed force controller in a pneumatic position servo

    Virvalo, T., Linjama, M. & Mattila, J., 1997, New Achievements and Ideals in Fluid Power Engineering, Proceedings of the 4th International Conference on Fluid Power Transmission and Control, '97 ICFP, September 9-11, Hangzhou, China. Yongxiang, L. & Yiyuan, G. (eds.). Beijing: International Academic Publishers, p. 327-330

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  4. Published

    A control system and a method for controlling an actuator and for optimizing the control by means of sets of valves coupled in parallel

    Linjama, M., 2006, Patent No. Pat. EP 1386083 B1, Priority date 30 Aug 2006, Priority No. (21) 02716861.6 (30) FI 20010827

    Research output: PatentScientific

  5. Published

    Adaptive on/off position control of low-pressure water hydraulic cylinder

    Linjama, M., Koskinen, K. T. & Vilenius, M., 2002, Proceedings of the 3rd International Fluid Power Conference, March 5th and 6th 2002, Aachen, Germany. p. 303-314

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  6. Published

    A miniature needle valve

    Karvonen, M., Juhola, M., Ahola, V., Söderlund, L. & Linjama, M., 2010, Proceedings of the Third Workshop on Digital Fluid Power, October 13-14 2010, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). p. 61-78

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  7. Published

    A Miniature On/Off Valve Concept for High Performance Water Hydraulics

    Paloniitty, M. & Linjama, M., 19 Oct 2017, ASME/BATH 2017 Symposium on Fluid Power and Motion Control. ASME, 8 p. FPMC2017-4254

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  8. Published

    Analysis by Simulation of Different Control Algorithms of A Digital Hydraulic Two-Actuator System

    Karvonen, M., Heikkilä, M., Huova, M. & Linjama, M., 2014, In : International Journal of Fluid Power. 15, 1, p. 33-44 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  9. Published

    Analysis of fault tolerance of digital hydraulic valve system

    Siivonen, L., Linjama, M. & Vilenius, M., 2005, Bath Workshop on Power Transmission and Motion Control (PTMC 2005), 7-9 September 2005. Johnston, D. N., Burrows, C. R. & Edge, K. A. (eds.). p. 133-146

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  10. Published

    Analysis of multi-input multi-output nature of hydraulic cranes

    Linjama, M. & Virvalo, T., 1999, Bath Workshop on Power Transmission and Motion Control (PTMC 99), 8-10 September, 1999, Bath, United Kingdom. Burrows, C. R. & Edge, K. A. (eds.). p. 15-29

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  11. Published

    Analysis of Real-Time Properties of a Digital Hydraulic Power Management System

    Boström, P., Alexeev, P., Heikkilä, M., Huova, M., Waldén, M. & Linjama, M., 2014, 19th International Conference, FMICS 2014, Florence, Italy, September 11-12, 2014.. Springer International Publishing, p. 33-47 15 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  12. Published

    Analysis of signals and power flow in a digital hydraulic multi actuator application

    Karvonen, M., Heikkilä, M., Linjama, M. & Huhtala, K., 2014, 8th FPNI Ph.D Symposium on Fluid Power, FPNI2014, June 11-13, 2014, Lappeenranta, Finland. The American Society of Mechanical Engineers ASME, p. 1-12 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  13. Published

    A New Simulation Platform for Mechanical and Hydraulic Hybrid System-Especially for Hydraulic Manipulators

    Sun, W., Linjama, M. & Virvalo, T., 2003, 1st International Conference on Computational Method in Fluid Power Technology, Methods for solving practical problems in Design and Control 26-28 November 2003, Melbourne, Australia. Stecki, J. S. (ed.). p. 271-280

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  14. Published

    A novel seat valve with reduced axial forces

    Lauttamus, T., Linjama, M., Nurmia, M. & Vilenius, M., 2006, Power Transmission and Motion Control, PTMC 2006, University of Bath, UK, 13-15 September 2006. Johnston, D. N. & Edge, K. A. (eds.). p. 415-427

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  15. Published

    A novel symmetric and bistable seat valve

    Karvonen, M., Uusitalo, J-P., Ahola, V., Linjama, M. & Vilenius, M., 2009, The 11th Scandinavian International Conference on Fluid Power SICFP'09, Linköping, Sweden, June 2-4 2009. p. 14 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  16. Published

    Applicability of a laminar flow based model in pipeflow modelling of water hydraulic systems

    Leino, T., Linjama, M., Koskinen, K. T. & Vilenius, M., 2001, In : International Journal of Fluid Power. 2, 2, p. 37-46

    Research output: Contribution to journalArticleScientificpeer-review

  17. Published

    Applicability of pneumatic cylinders in low-pressure water hydraulics

    Lakkonen, M., Linjama, M., Koskinen, K. & Vilenius, M., 2000, Lubricants for Off-Highway Applications. USA: SAE International, p. 61-66

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  18. Published

    Aseman säätö hydraulisissa puomeissa

    Linjama, M., 1996, Tampere: Tampere University of Technology. 34 p. (Tampere University of Technology, Institute of Hydraulics and Automation, IHA, Report; no. 50)

    Research output: Book/ReportCommissioned reportProfessional

  19. Published

    Aspects of the energy consumption of a digital hydraulic power management system supplying a digital and proportional valve controlled multi actuator system

    Karvonen, M., Heikkilä, M., Tikkanen, S., Linjama, M. & Huhtala, K., 2014, ASME/BATH 2014 Symposium on Fluid Power and Motion Control, FPMC2014, September 10-12, 2014, Bath, United Kingdom. The American Society of Mechanical Engineers ASME, p. 1-9 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  20. Published

    Bayesian statistical analysis for performance evaluation in real-time control systems

    Boström, P., Heikkilä, M., Huova, M., Waldèn, M. & Linjama, M., 2015, Quantitative Evaluation of Systems: 12th International Conference, QEST 2015, Madrid, Spain, September 1-3, 2015, Proceedings. Springer Verlag, Vol. 9259. p. 312-328 17 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 9259).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  21. Published

    Cavitation Resistant Water Hydraulic Pressure Relief Valve

    Liukkunen, T., Nurmia, M., Linjama, M., Koskinen, K. T. & Vilenius, M., 2002, Proceedings of the 3rd International Fluid Power Conference, March 5th and 6th 2002, Aachen, Germany. p. 255-266

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  22. Published

    Characteristics of a Digital Flow Control Unit with PCM Control

    Laamanen, A., Linjama, M. & Vilenius, M., 2003, 7th Triennial International Symposium on Fluid Control, Measurement and Visualization, Sorrento, Italy, August 25-28.2003. Edinburgh, UK: Optimage Ltd., Edinburgh, UK, EH10 5PJ, p. 16 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  23. Published

    Characteristics of Digital Hydraulics with Commercial Controllers

    Huova, M., Ahopelto, M., Ketonen, M., Ahola, V., Linjama, M. & Huhtala, K., Feb 2015, The Seventh Workshop on Digital Fluid Power . Linz Center of Mechatronics, p. 114-128 15 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  24. Published

    Compact and efficient implementation of a pressurized tank line

    Paloniitty, M., Linjama, M. & Huova, M., 7 Nov 2018, 4 p.

    Research output: Other contributionScientific

  25. Published

    Comparing different controllers of an electrohydraulic position servo

    Virvalo, T., Linjama, M. & Mattila, J., 1997, New Achievements and Ideals in Fluid Power Engineering, Proceedings of the 4th International Conference on Fluid Power Transmission and Control, '97 ICFP, September 9-11, Hangzhou, China. Yongxiang, L. & Yiyuan, G. (eds.). Beijing: International Academic Publishers, p. 215-219

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  26. Published

    Comparison of digital hydraulic and traditional servo system in demanding water hydraulic tracking control

    Linjama, M., Seppälä, J., Mattila, J. & Vilenius, M., 2008, Fluid Power and Motion Control FPMC 2008, 10-12 September 2008, Bath, UK. Johnston, D. N. & Plummer, A. R. (eds.). p. 393-403

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  27. Published

    Comparison of energy saving methods for loader

    Huova, M., Heikkilä, M., Linjama, M., Tikkanen, S. & Huhtala, K., 17 Oct 2018, Proceedings of the 10th Colloquium Mobile Hydraulics, MHK 2018: 16th and 17th October 2018, Brunswick, Germany.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  28. Published

    Comparison of proportional control and displacement control using digital hydraulic power management system

    Heikkilä, M., Karvonen, M., Linjama, M., Tikkanen, S. & Huhtala, K., 2014, ASME/BATH 2014 Symposium on Fluid Power and Motion Control, FPMC2014, September 10-12, 2014, Bath, United Kingdom. The American Society of Mechanical Engineers ASME, p. 1-8 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  29. Published

    Compensation of elasticity in one-link hydraulic boom

    Linjama, M., Virvalo, T. & Vilenius, M., 1995, Proceedings of The Fourth Scandinavian International Conference on Fluid Power, September 26-29, Tampere, Finland. p. 1116-1127

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  30. Published

    Compensation of the null point drift of a hydraulic servo valve in a position servo application

    Virvalo, T. & Linjama, M., 1999, Proceedings of the 3rd International Symposium on Fluid Power Transmission and Control, September 7-9, 1999, Harbin, China. p. 259-263

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  31. Published

    Concept of Digital Microhydraulic Valve System Utilising Lamination Technology

    Paloniitty, M., Linjama, M. & Huhtala, K., 2014, Conference Proceedings, 9th International Fluid Power Conference, 24th - 26th March, 2014, Aachen, Germany, Modern Fluid Power - Challenges, Responsibilities, Markets, Vol. 1. Murrenhoff, H. (ed.). Aachen: Hp - Fördervereinigung Fluidtechnik E.v., p. 303-313 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  32. Published

    Contract-based design in controller development and its evaluation

    Boström, P., Plaska, M., Huova, M., Linjama, M., Heikkilä, M., Sere, K. & Walden, M., 2009, Nodes 09: Nordic workshop and doctoral symposium on Dependability and security, Linköping, Sweden, April 27, 2009. Asplund, M., Nadjm-Tehrani, S. & Petre, L. (eds.). p. 21-27

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  33. Published

    Controller design of digital hydraulic flow control valve

    Huova, M., Plaska, M., Siivonen, L., Linjama, M., Walden, M., Vilenius, M. & Sere, K., 2009, The 11th Scandinavian International Conference on Fluid Power SICFP'09, Linköping, Sweden, June 2-4 2009. p. 15 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  34. Published

    Design and implementation of digital hydraulic synchronization and force control system

    Linjama, M., Hopponen, V., Ikonen, A., Rintamäki, P., Vilenius, M. & Pietola, M., 2009, The 11th Scandinavian International Conference on Fluid Power SICFP'09, Linköping, Sweden, June 2-4 2009. p. 13 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  35. Published

    Design and implementation of energy saving digital hydraulic control system

    Linjama, M., Huova, M., Boström, P., Laamanen, A., Siivonen, L., Morel, L., Walden, M. & Vilenius, M., 2007, The Tenth Scandinavian International Conference on Fluid Power, May 21-23, 2007, Tampere, Finland, SICFP'07. Vilenius, J. & Koskinen, K. T. (eds.). Tampere: Tampere University of Technology, p. 341-359

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  36. Published

    Design and validation of digital controllers for hydraulics systems

    Boström, P., Linjama, M., Morel, L., Siivonen, L. & Walden, M., 2007, The Tenth Scandinavian International Conference on Fluid Power, May 21-23, 2007, Tampere, Finland, SICFP'07. Vilenius, J. & Koskinen, K. T. (eds.). Tampere: Tampere University of Technology, p. 227-241

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  37. Published

    Detecting of faults in a valve system and a fault tolerant control

    Siivonen, L. & Linjama, M., 2012, Patent No. Pat. US 8215227 B2, Priority date 10 Jul 2012, Priority No. (21) 11/991559;(30) FI 20055479

    Research output: PatentScientific

  38. Published

    Development of Controllers Using Simulink and Contract-Based Design. Chapter 8

    Boström, P., Huova, M., Olszewska, M., Linjama, M., Heikkilä, M., Sere, K. & Walden, M., 2011, Dependability and Computer Engineering: Concepts for Software-Intensive Systems. Petre, L., Sere, K. & Troubitsyna, E. (eds.). Hershey, PA: IGI Global, p. 151-169

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  39. Published

    Digitaalihydrauliikan kuulumiset

    Linjama, M., 2008, In : Fluid Finland. 2, p. 8-10

    Research output: Contribution to journalArticleProfessional

  40. Published

    Digitaalihydrauliikan seminaarin satoa Tampereella

    Linjama, M., 2013, In : Fluid Finland. 12, 1, p. 8-8 1 p.

    Research output: Contribution to journalArticleProfessional

  41. Published

    Digitaalihydrauliikan seminaarin suosio yllätti

    Linjama, M., 2008, In : Fluid Finland. 3, p. 36-37

    Research output: Contribution to journalArticleProfessional

  42. Published

    Digitaalihydrauliikka

    Linjama, M., 2006, In : Fluid Finland. 5, 1, p. 14-19

    Research output: Contribution to journalArticleProfessional

  43. Published

    Digitaalihydrauliikka tulee!

    Linjama, M., 2010, In : Metsäalan ammattilehti. 5, p. 88-89

    Research output: Contribution to journalArticleProfessional

  44. Published

    Digitaalihydrauliikka voi tulevaisuudessa korvata analogiventtiilit

    Linjama, M. & Vilenius, M., 2002, In : Metsä Forest, Hydrauliikka-liite. 1/2002, p. 1 s

    Research output: Contribution to journalArticleProfessional

  45. Published

    Digitaalisen mikrohydrauliikan sovellussatoa

    Linjama, M., 2009, In : Fluid Finland. 2/2009, p. 30-31

    Research output: Contribution to journalArticleProfessional

  46. Published

    Digital flow control unit-an alternative for a proportional valve?

    Laamanen, A., Siivonen, L., Linjama, M. & Vilenius, M., 2004, Bath Workshop on Power Transmission and Motion Control (PTMC 2004). p. 297-308

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  47. Published

    Digital flow control unit for controlling amount of water used for binding dust

    Laamanen, A., Anttonen, P. & Linjama, M., 2010, Proceedings of the Third Workshop on Digital Fluid Power, October 13-14 2010, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). p. 119-128

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  48. Published

    Digital fluid power - state of the art

    Linjama, M., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Sairala, H. & Koskinen, K. T. (eds.). Tampere: Scandinavian International Conference on Fluid Power, p. 331-354 (Scandinavian International Conference on Fluid Power SICFP; vol. 12, no. 3).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  49. Published

    Digital hydraulic control of a mobile machine joint actuator mockup

    Linjama, M. & Vilenius, M., 2004, Bath Workshop on Power Transmission and Motion Control (PTMC 2004). p. 145-158

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  50. Published

    Digital hydraulic multi-pressure actuators - simulation study of a forwarder crane

    Heikkilä, M., Huova, M. & Linjama, M., 28 Feb 2019, The 10th Workshop on Digital Fluid Power : February 28th - March 1st, 2019, Linz, Austria. Linz Center of Mechatronics, 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  51. Published

    Digital hydraulic multi-pressure actuator – the concept, simulation study and first experimental results

    Huova, M., Aalto, A., Linjama, M., Huhtala, K., Lantela, T. & Pietola, M., 2017, In : International Journal of Fluid Power. 18, 3, p. 141-152 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  52. Published

    Digital Hydraulic Power Management System - Measured Characteristics of a Second Prototype

    Heikkilä, M., Tammisto, J., Linjama, M. & Huhtala, K., May 2016, Proceedings of the Eighth Workshop on Digital Fluid Power (DFP16) . Uusi-Heikkilä, J. & Linjama, M. (eds.). p. 69-81 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  53. Published

    Digital hydraulic power management system - towards lossless hydraulics

    Linjama, M. & Huhtala, K., 2010, Proceedings of the Third Workshop on Digital Fluid Power, October 13-14 2010, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). p. 5-22

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  54. Published

    Digital Hydraulic Power Management System with Five Independent Outlets - Simulation Study of Displacement Controlled Excavator Crane

    Heikkilä, M., Linjama, M. & Huhtala, K., 2014, Conference Proceedings, 9th International Fluid Power Conference 24th - 26th March, Aachen, Germany, Modern Fluid Power - Challenges, Responsibilities, Markets, Vol. 1. Murrenhoff, H. (ed.). Aachen: Hp - Fördervereinigung Fluidtechnik E.v., p. 455-465 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  55. Published

    Digital hydraulic pressure control

    Ijas, M., Mäkinen, E. & Linjama, M., 2009, The 11th Scandinavian International Conference on Fluid Power SICFP'09, Linköping, Sweden, June 2-4 2009. p. 12 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  56. Published

    Digital Hydraulic Pressure Relief Function

    Ketonen, M., Huova, M., Heikkilä, M., Linjama, M., Boström, P. & Walden, M., 2012, Fluid Power and Motion Control, FPMC 2012, University of Bath, UK. Johnston, D. N. & Plummer, A. R. (eds.). Bath, United Kingdom: Centre for Power Transmission and Motion Control, University of Bath, ASME, p. 137-150 (Bath/ASME Symposium on Fluid Power and Motion Control).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  57. Published

    Digital Hydraulics - Past and Future

    Laamanen, A., Linjama, M. & Vilenius, M., 2004, Second Arctic-Mediterranean Post Graduate Workshop on Intelligent Machines and Transport Systems Proceedings, March 13- 21, 2004, Oulu-Kiruna-Narvik. p. 6 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  58. Published

    Digital hydraulics research at IHA

    Linjama, M., 2008, Proceedings of the First Workshop on Digital Fluid Power 3rd October, 2008, Tampere, Finland. Linjama, M. & Laamanen, A. (eds.). p. 7-30

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  59. Published

    Digital hydraulics - Towards perfect valve technology

    Linjama, M. & Vilenius, M., 2007, The Tenth Scandinavian International Conference on Fluid Power, May 21-23, 2007, Tampere, Finland, SICFP'07. Vilenius, J. & Koskinen, K. T. (eds.). Tampere: Tampere University of Technology, p. 181-196

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  60. Published

    Digital hydraulics - Towards perfect valve technology

    Linjama, M. & Vilenius, M., 2008, In : Ventil - Journal for Hydraulics, Automation and Mechatronics. 14, 2, p. 138-148

    Research output: Contribution to journalArticleScientificpeer-review

  61. Published

    Digital Hydraulic System

    Sipola, A., Vihtanen, H-P., Linjama, M. & Laamanen, A., 2014, Patent No. Australian Patent Office, AU 2009300985 B2, Priority date 8 May 2014, Priority No. (31) 20085958 : (21) 2009300985

    Research output: PatentScientific

  62. Published

    Digital hydraulic tracking control of mobile machine joint actuator mockup

    Linjama, M. & Vilenius, M., 2005, Proceedings of the Ninth Scandinavian International Conference on Fluid Power, SICFP'05, June 1.-3, 2005, Linköping, Sweden. p. 16 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  63. Published

    Digital microhydraulics

    Linjama, M. & Karvonen, M., 2008, Proceedings of the First Workshop on Digital Fluid Power 3rd October, 2008, Tampere, Finland. Linjama, M. & Laamanen, A. (eds.). p. 141-152

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  64. Published

    Digital Microhydraulics

    Laamanen, A. & Linjama, M., 2014, Tampere: FIMECC Oy. 4 p. (FIMECC Publications Series; no. 2)

    Research output: Book/ReportCommissioned reportProfessional

  65. Published

    Digital pump-motor with independent outlets

    Linjama, M. & Huhtala, K., 2009, The 11th Scandinavian International Conference on Fluid Power SICFP'09, Linköping, Sweden, June 2-4 2009. p. 16 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  66. Published

    Digital schlägt Analog um 40%

    Linjama, M., 2008, In : Fluid. 7-8/2008, p. 12-13

    Research output: Contribution to journalArticleProfessional

  67. Published

    Direct connection of digital hydraulic power management system and double acting cylinder - a simulation study

    Heikkilä, M. & Linjama, M., 2011, The Fourth Workshop on Digital Fluid Power, 21st-22nd November, 2011, Linz, Austria. Linz: DFP-Workshops, p. 59-74 (Workshop on Digital Fluid Power; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  68. Published

    Discussion: Is the future of fluid power digital? Response

    Linjama, M., Scheidl, R. & Schmidt, S., 2012, In : Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering. 226, I6, p. 726-727

    Research output: Contribution to journalArticleScientific

  69. Published

    Displacement control of a mobile crane using a digital hydraulic power management system

    Heikkilä, M. & Linjama, M., 2013, In : Mechatronics. 23, 4, p. 452-461 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  70. Published

    Dynamic analysis of a bistable actuator for digital hydraulics

    Uusitalo, J-P., Söderlund, L., Kettunen, L., Linjama, M. & Vilenius, M., 2009, In : IET Science Measurement and Technology. 3, 3, p. 235-243

    Research output: Contribution to journalArticleScientificpeer-review

  71. Published

    Dynamic properties of a flexible hydraulic crane

    Linjama, M. & Virvalo, T., 1997, New Achievements and Ideals in Fluid Power Engineering, Proceedings of the 4th International Conference on Fluid Power Transmission and Control, '97 ICFP, September 9-11, Hangzhou, China. Yongxiang, L. & Yiyuan, G. (eds.). Beijing: International Academic Publishers, p. 436-441

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  72. Published

    Effect of cavitation in water hydraulic poppet valves

    Oshima, S., Leino, T., Linjama, M., Koskinen, K. T. & Vilenius, M. J., 2001, In : International Journal of Fluid Power. 2, 3, p. 5-14

    Research output: Contribution to journalArticleScientificpeer-review

  73. Published

    Energy Efficiency of Digital Hydraulic Valve Control Systems

    Huova, M., Linjama, M. & Huhtala, K., 2013, SAE 2013 Commercial Vehicle Engineering Congress (COMVEC), October 1-3, 2013, Rosemont, Illinois, USA. 13 p. (SAE Technical Papers).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  74. Published

    Energy efficiency of three-chamber cylinder with digital valve system

    Huova, M., Laamanen, A. & Linjama, M., 2010, In : International Journal of Fluid Power. 11, 3, p. 15-22

    Research output: Contribution to journalArticleScientificpeer-review

  75. Published

    Energy efficient control of multiactuator digital hydraulic mobile machine

    Huova, M., Karvonen, M., Ahola, V., Linjama, M. & Vilenius, M., 2010, 7th International Fluid Power Conference (7th IFK), 22-24 March 2010, Aachen, Germany. p. 1-12 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  76. Published

    Energy efficient digital hydraulic force control

    Hopponen, V., Linjama, M., Ikonen, A., Rintamäki, P., Pietola, M. & Vilenius, M., 2009, The 11th Scandinavian International Conference on Fluid Power SICFP'09, Linköping, Sweden, June 2-4 2009. p. 11 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  77. Published

    Energy efficient digital hydraulic valve control utilizing pressurized tank line

    Huova, M. & Linjama, M., 2012, Proceedings of the 8th International Fluid Power Conference Dresden, March 26-28, 2012. Dresden: Technische Universutät Dresden, Dresdner Verein zur Förderung der Fluidtechnik, p. 111-122 12 p. (International Fluid Power Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  78. Published

    Energy-efficient motion control of a digital hydraulic joint actuator

    Linjama, M. & Vilenius, M., 2005, Proceedings of the 6th JFPS International Symposium on Fluid Power, November 7-10, 2005, Tsukuba, Japani. p. 640-645

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  79. Published

    Energy efficient tracking control of a mobile machine boom mockup

    Linjama, M., Huova, M., Karhu, O. & Huhtala, K., 24 May 2016, Proceedings of the eighth workshop on digital fluid power. Uusi-Heikkilä, J. & Linjama, M. (eds.). Tampere: Tampere University of Technology, p. 265-275

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  80. Published

    Energy saving digital hydraulics

    Linjama, M., 2009, Proceedings of The Second Workshop on Digital Fluid Power, 12-13 November 2009, Linz, Austria. Scheidl, R. & Winkler, B. (eds.). p. 5-20

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  81. Published

    Equal coded digital hydraulic valve system - improving tracking control with pulse frequency modulation

    Paloniitty, M., Linjama, M. & Huhtala, K., 2014, The Second International Conference on Dynamics and Vibroacoustics of Machines, September 15-17, 2014, Samara, Russia. p. 618-626 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  82. Published

    Equal Coded Digital Hydraulic Valve System - Improving Tracking Control with Pulse Frequency Modulation

    Paloniitty, M., Linjama, M. & Huhtala, K., 2015, Procedia Engineering. Elsevier Ireland Ltd, Vol. 106. p. 83-91 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  83. Published

    Experimental evaluation of a digital hydraulic power management system

    Heikkilä, M., Tammisto, J., Huova, M., Huhtala, K. & Linjama, M., 2010, Proceedings of the Third Workshop on Digital Fluid Power, October 13-14 2010, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). p. 129-142

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  84. Published

    Experimental evaluation of a piston-type digital pump-motor-transformer with two independent outlets

    Heikkilä, M., Tammisto, J., Huova, M., Huhtala, K. & Linjama, M., 2010, Fluid Power and Motion Control (FPMC 2010), 15-17 September 2010, University of Bath, UK. Johnston, D. N. & Plummer, A. (eds.). p. 83-97

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  85. Published

    Experimental study of robustness of some controllers in a hydraulic position servo drive

    Virvalo, T. & Linjama, M., 2001, Sbornik konference, Hydraulika a Pneumatika, June 5-6, 2001, Ostrava, Czech Republic. p. 199-208

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  86. Published

    Experimental Study on Cavitation in Water Hydraulic Poppet Valve

    Oshima, S., Leino, T., Linjama, M., Koskinen, K. T. & Vilenius, M., 2002, In : Transactions of the Japan Fluid Power System Society. 33, 2, p. 29-35

    Research output: Contribution to journalArticleScientificpeer-review

  87. Published

    Experimental study on dynamics of turbulent pipeline flow

    Leino, T., Koskinen, K., Linjama, M. & Vilenius, M., 2000, Proceedings. Sixth Triennal International Symposium on Fluid Control, Measurement and Visualization, FLUCOME 2000, August 13-17, 2000, Sherbrooke, Canada. Laneville, A. (ed.). p. 5 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  88. Published

    Fast switching valve for low-pressure water hydraulics

    Heikkilä, M., Paloniitty, M. & Linjama, M., 8 Sep 2017. 9 p.

    Research output: Other conference contributionPaper, poster or abstractScientific

  89. Published

    Fault detection and diagnosis of digital hydraulic valve system

    Siivonen, L., Linjama, M., Huova, M. & Vilenius, M., 2007, The Tenth Scandinavian International Conference on Fluid Power, May 21-23, 2007, Tampere, Finland, SICFP'07. Vilenius, J. & Koskinen, K. T. (eds.). Tampere: Tampere University of Technology, p. 211-226

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  90. Published

    Fault Tolerance of Digital Hydraulics in High Dynamic Hydraulic System

    Siivonen, L., Linjama, M., Huova, M., Försterling, H., Stamm, E. & Deubel, T., 20 May 2015, The Fourteenth Scandinavian International Conference on Fluid Power. 1 ed. Tampere, Finland, Vol. 1. 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  91. Published

    Fault tolerance of digital hydraulic valve system with separately controlled flow paths

    Siivonen, L., Linjama, M. & Vilenius, M., 2006, Proceedings of the 4th FPNI - PhD Symposium, Sarasota 2006, June 13-17, 2006, Sarasota, FL, USA. Ivantysynova, M. (ed.). p. 331-343

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  92. Published

    Fault Tolerance with digital Hydraulic Valve System

    Siivonen, L., Linjama, M. & Vilenius, M., 2011, The Eight International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 20-22 June 2011, Cardiff, Wales. Northamption: British Institute of Non-destructive Testing, p. 1250-1262 (International Conference on Condition Monitoring and Machinery Failure Prevention Technologies; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  93. Published

    Fault-tolerant control of a multi-outlet digital hydraulic pump-motor

    Heikkilä, M. & Linjama, M., Mar 2018, Fluid power networks: Proceedings of the 11th International Fluid Power Conference, 19th-21st March 2018, Aachen. Murrenhoff, H. (ed.). Aachen University: RWTH Publications, Vol. 1. p. 145-157 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  94. Published

    Fault-Tolerant Control of EHA With Digital Hydraulic Valve System

    Siivonen, L., Aaltonen, J., Linjama, M. & Vilenius, M., 13 Jul 2007, Recent Advances in Aerospace Actuation Systems and Components. Toulouse, France: Institut National des Sciences Appliquées, p. 115-119 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  95. Published

    Fault-tolerant scheduling of stateful tasks in uniprocessor real-time systems

    Alexeev, P., Boström, P., Walden, M., Huova, M., Linjama, M. & Sere, K., 2013, 3rd International Conference on Pervasive Embedded Computing and Communication Systems, PECCS 2013, Barcelona, Spain, 19.-21.2.2013. Benavente-Peces, C. & Filipe, J. (eds.). SCITEPRESS, p. 189-194 6 p. (International Conference on Pervasive Embedded Computing and Communication Systems).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  96. Published

    Feasibility study of existing low-pressure water hydraulic components

    Laakso, M., Myllykylä, J., Tammisto, J., Linjama, M., Koskinen, K. T. & Vilenius, M., 1999, Tampere: Tampere University of Technology. 23 p. (Tampere University of Technology, Institute of Hydraulics and Automation, IHA, Report; no. 73)

    Research output: Book/ReportCommissioned reportProfessional

  97. Published

    Friction characteristics of a multi-chamber cylinder for digital hydraulics

    Cho, S. H., Niemi-Pynttäri, O. & Linjama, M., 2016, In : Proceedings of the institution of Mechanical Engineers Part C: Journal of Mechanical Engineering Science. 230, 5, p. 685-698 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  98. Published

    Fuel efficiency analysis of selected hydraulic hybrids in a wheel loader application

    Huova, M., Tammisto, J., Linjama, M. & Tervonen, J., 14 Sep 2018, Proceedings of the BATH/ASME 2018 Symposium on Fluid Power and Motion Control FPMC2018: Bath, UK, September 12-14, 2018. ASME, 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  99. Published

    Fuel efficiency optimization of a baseline wheel loader and its hydraulic hybrid variants using dynamic programming

    Heikkilä, M., Huova, M., Tammisto, J., Linjama, M. & Tervonen, J., Sep 2018, Proceedings of the BATH/ASME 2018 Symposium on Fluid Power and Motion Control FPMC2018: Bath, UK, September 12-14, 2018. ASME, 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  100. Published

    Fundamentals of Digital Microhydraulic

    Linjama, M., 2012, Proceedings of the 8th International Fluid Power Conference, Dresden, March 26-28, 2012. Dresden: Technische Universität Dresden, Institute of Fluid Power, p. 385-396 (International Fluid Power Conference; vol. 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Previous 1 2 Next

ID: 39448