Tampere University of Technology

TUTCRIS Research Portal

Matti Linjama

  1. Published

    Accurate flow control with digital valve system

    Siivonen, L., Linjama, M., Vilenius, M. & Anttonen, P., 2008, Proceedings of the 51st National Conference on Fluid Power March 12-14, 2008, IFPE 2008, Las Vegas, USA. p. 287-294

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  2. Published

    Accurate trajectory tracking control of water hydraulic cylinder with non-ideal on/off valves

    Linjama, M., Koskinen, K. T. & Vilenius, M., 2003, In : International Journal of Fluid Power. 4, 1, p. 7-16

    Research output: Contribution to journalArticleScientificpeer-review

  3. Published

    A computed force controller in a pneumatic position servo

    Virvalo, T., Linjama, M. & Mattila, J., 1997, New Achievements and Ideals in Fluid Power Engineering, Proceedings of the 4th International Conference on Fluid Power Transmission and Control, '97 ICFP, September 9-11, Hangzhou, China. Yongxiang, L. & Yiyuan, G. (eds.). Beijing: International Academic Publishers, p. 327-330

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  4. Published

    A control system and a method for controlling an actuator and for optimizing the control by means of sets of valves coupled in parallel

    Linjama, M., 2006, Patent No. Pat. EP 1386083 B1, Priority date 30 Aug 2006, Priority No. (21) 02716861.6 (30) FI 20010827

    Research output: PatentScientific

  5. Published

    Adaptive on/off position control of low-pressure water hydraulic cylinder

    Linjama, M., Koskinen, K. T. & Vilenius, M., 2002, Proceedings of the 3rd International Fluid Power Conference, March 5th and 6th 2002, Aachen, Germany. p. 303-314

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  6. Published

    A miniature needle valve

    Karvonen, M., Juhola, M., Ahola, V., Söderlund, L. & Linjama, M., 2010, Proceedings of the Third Workshop on Digital Fluid Power, October 13-14 2010, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). p. 61-78

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  7. Published

    A Miniature On/Off Valve Concept for High Performance Water Hydraulics

    Paloniitty, M. & Linjama, M., 19 Oct 2017, ASME/BATH 2017 Symposium on Fluid Power and Motion Control. ASME, 8 p. FPMC2017-4254

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  8. Published

    Analysis by Simulation of Different Control Algorithms of A Digital Hydraulic Two-Actuator System

    Karvonen, M., Heikkilä, M., Huova, M. & Linjama, M., 2014, In : International Journal of Fluid Power. 15, 1, p. 33-44 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  9. Published

    Analysis of fault tolerance of digital hydraulic valve system

    Siivonen, L., Linjama, M. & Vilenius, M., 2005, Bath Workshop on Power Transmission and Motion Control (PTMC 2005), 7-9 September 2005. Johnston, D. N., Burrows, C. R. & Edge, K. A. (eds.). p. 133-146

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  10. Published

    Analysis of multi-input multi-output nature of hydraulic cranes

    Linjama, M. & Virvalo, T., 1999, Bath Workshop on Power Transmission and Motion Control (PTMC 99), 8-10 September, 1999, Bath, United Kingdom. Burrows, C. R. & Edge, K. A. (eds.). p. 15-29

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  11. Published

    Analysis of Real-Time Properties of a Digital Hydraulic Power Management System

    Boström, P., Alexeev, P., Heikkilä, M., Huova, M., Waldén, M. & Linjama, M., 2014, 19th International Conference, FMICS 2014, Florence, Italy, September 11-12, 2014.. Springer International Publishing, p. 33-47 15 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  12. Published

    Analysis of signals and power flow in a digital hydraulic multi actuator application

    Karvonen, M., Heikkilä, M., Linjama, M. & Huhtala, K., 2014, 8th FPNI Ph.D Symposium on Fluid Power, FPNI2014, June 11-13, 2014, Lappeenranta, Finland. The American Society of Mechanical Engineers ASME, p. 1-12 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  13. Published

    A New Simulation Platform for Mechanical and Hydraulic Hybrid System-Especially for Hydraulic Manipulators

    Sun, W., Linjama, M. & Virvalo, T., 2003, 1st International Conference on Computational Method in Fluid Power Technology, Methods for solving practical problems in Design and Control 26-28 November 2003, Melbourne, Australia. Stecki, J. S. (ed.). p. 271-280

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  14. Published

    A novel seat valve with reduced axial forces

    Lauttamus, T., Linjama, M., Nurmia, M. & Vilenius, M., 2006, Power Transmission and Motion Control, PTMC 2006, University of Bath, UK, 13-15 September 2006. Johnston, D. N. & Edge, K. A. (eds.). p. 415-427

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  15. Published

    A novel symmetric and bistable seat valve

    Karvonen, M., Uusitalo, J-P., Ahola, V., Linjama, M. & Vilenius, M., 2009, The 11th Scandinavian International Conference on Fluid Power SICFP'09, Linköping, Sweden, June 2-4 2009. p. 14 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  16. Published

    Applicability of a laminar flow based model in pipeflow modelling of water hydraulic systems

    Leino, T., Linjama, M., Koskinen, K. T. & Vilenius, M., 2001, In : International Journal of Fluid Power. 2, 2, p. 37-46

    Research output: Contribution to journalArticleScientificpeer-review

  17. Published

    Applicability of pneumatic cylinders in low-pressure water hydraulics

    Lakkonen, M., Linjama, M., Koskinen, K. & Vilenius, M., 2000, Lubricants for Off-Highway Applications. USA: SAE International, p. 61-66

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  18. Published

    Aseman säätö hydraulisissa puomeissa

    Linjama, M., 1996, Tampere: Tampere University of Technology. 34 p. (Tampere University of Technology, Institute of Hydraulics and Automation, IHA, Report; no. 50)

    Research output: Book/ReportCommissioned reportProfessional

  19. Published

    Aspects of the energy consumption of a digital hydraulic power management system supplying a digital and proportional valve controlled multi actuator system

    Karvonen, M., Heikkilä, M., Tikkanen, S., Linjama, M. & Huhtala, K., 2014, ASME/BATH 2014 Symposium on Fluid Power and Motion Control, FPMC2014, September 10-12, 2014, Bath, United Kingdom. The American Society of Mechanical Engineers ASME, p. 1-9 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  20. Published

    Bayesian statistical analysis for performance evaluation in real-time control systems

    Boström, P., Heikkilä, M., Huova, M., Waldèn, M. & Linjama, M., 2015, Quantitative Evaluation of Systems: 12th International Conference, QEST 2015, Madrid, Spain, September 1-3, 2015, Proceedings. Springer Verlag, Vol. 9259. p. 312-328 17 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 9259).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  21. Published

    Cavitation Resistant Water Hydraulic Pressure Relief Valve

    Liukkunen, T., Nurmia, M., Linjama, M., Koskinen, K. T. & Vilenius, M., 2002, Proceedings of the 3rd International Fluid Power Conference, March 5th and 6th 2002, Aachen, Germany. p. 255-266

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  22. Published

    Characteristics of a Digital Flow Control Unit with PCM Control

    Laamanen, A., Linjama, M. & Vilenius, M., 2003, 7th Triennial International Symposium on Fluid Control, Measurement and Visualization, Sorrento, Italy, August 25-28.2003. Edinburgh, UK: Optimage Ltd., Edinburgh, UK, EH10 5PJ, p. 16 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  23. Published

    Characteristics of Digital Hydraulics with Commercial Controllers

    Huova, M., Ahopelto, M., Ketonen, M., Ahola, V., Linjama, M. & Huhtala, K., Feb 2015, The Seventh Workshop on Digital Fluid Power . Linz Center of Mechatronics, p. 114-128 15 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  24. Published

    Compact and efficient implementation of a pressurized tank line

    Paloniitty, M., Linjama, M. & Huova, M., 7 Nov 2018, 4 p.

    Research output: Other contributionScientific

  25. Published

    Comparing different controllers of an electrohydraulic position servo

    Virvalo, T., Linjama, M. & Mattila, J., 1997, New Achievements and Ideals in Fluid Power Engineering, Proceedings of the 4th International Conference on Fluid Power Transmission and Control, '97 ICFP, September 9-11, Hangzhou, China. Yongxiang, L. & Yiyuan, G. (eds.). Beijing: International Academic Publishers, p. 215-219

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  26. Published

    Comparison of digital hydraulic and traditional servo system in demanding water hydraulic tracking control

    Linjama, M., Seppälä, J., Mattila, J. & Vilenius, M., 2008, Fluid Power and Motion Control FPMC 2008, 10-12 September 2008, Bath, UK. Johnston, D. N. & Plummer, A. R. (eds.). p. 393-403

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  27. Published

    Comparison of energy saving methods for loader

    Huova, M., Heikkilä, M., Linjama, M., Tikkanen, S. & Huhtala, K., 17 Oct 2018, Proceedings of the 10th Colloquium Mobile Hydraulics, MHK 2018: 16th and 17th October 2018, Brunswick, Germany.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  28. Published

    Comparison of proportional control and displacement control using digital hydraulic power management system

    Heikkilä, M., Karvonen, M., Linjama, M., Tikkanen, S. & Huhtala, K., 2014, ASME/BATH 2014 Symposium on Fluid Power and Motion Control, FPMC2014, September 10-12, 2014, Bath, United Kingdom. The American Society of Mechanical Engineers ASME, p. 1-8 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  29. Published

    Compensation of elasticity in one-link hydraulic boom

    Linjama, M., Virvalo, T. & Vilenius, M., 1995, Proceedings of The Fourth Scandinavian International Conference on Fluid Power, September 26-29, Tampere, Finland. p. 1116-1127

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  30. Published

    Compensation of the null point drift of a hydraulic servo valve in a position servo application

    Virvalo, T. & Linjama, M., 1999, Proceedings of the 3rd International Symposium on Fluid Power Transmission and Control, September 7-9, 1999, Harbin, China. p. 259-263

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  31. Published

    Concept of Digital Microhydraulic Valve System Utilising Lamination Technology

    Paloniitty, M., Linjama, M. & Huhtala, K., 2014, Conference Proceedings, 9th International Fluid Power Conference, 24th - 26th March, 2014, Aachen, Germany, Modern Fluid Power - Challenges, Responsibilities, Markets, Vol. 1. Murrenhoff, H. (ed.). Aachen: Hp - Fördervereinigung Fluidtechnik E.v., p. 303-313 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  32. Published

    Contract-based design in controller development and its evaluation

    Boström, P., Plaska, M., Huova, M., Linjama, M., Heikkilä, M., Sere, K. & Walden, M., 2009, Nodes 09: Nordic workshop and doctoral symposium on Dependability and security, Linköping, Sweden, April 27, 2009. Asplund, M., Nadjm-Tehrani, S. & Petre, L. (eds.). p. 21-27

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  33. Published

    Controller design of digital hydraulic flow control valve

    Huova, M., Plaska, M., Siivonen, L., Linjama, M., Walden, M., Vilenius, M. & Sere, K., 2009, The 11th Scandinavian International Conference on Fluid Power SICFP'09, Linköping, Sweden, June 2-4 2009. p. 15 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  34. Published

    Design and implementation of digital hydraulic synchronization and force control system

    Linjama, M., Hopponen, V., Ikonen, A., Rintamäki, P., Vilenius, M. & Pietola, M., 2009, The 11th Scandinavian International Conference on Fluid Power SICFP'09, Linköping, Sweden, June 2-4 2009. p. 13 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  35. Published

    Design and implementation of energy saving digital hydraulic control system

    Linjama, M., Huova, M., Boström, P., Laamanen, A., Siivonen, L., Morel, L., Walden, M. & Vilenius, M., 2007, The Tenth Scandinavian International Conference on Fluid Power, May 21-23, 2007, Tampere, Finland, SICFP'07. Vilenius, J. & Koskinen, K. T. (eds.). Tampere: Tampere University of Technology, p. 341-359

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  36. Published

    Design and validation of digital controllers for hydraulics systems

    Boström, P., Linjama, M., Morel, L., Siivonen, L. & Walden, M., 2007, The Tenth Scandinavian International Conference on Fluid Power, May 21-23, 2007, Tampere, Finland, SICFP'07. Vilenius, J. & Koskinen, K. T. (eds.). Tampere: Tampere University of Technology, p. 227-241

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  37. Published

    Detecting of faults in a valve system and a fault tolerant control

    Siivonen, L. & Linjama, M., 2012, Patent No. Pat. US 8215227 B2, Priority date 10 Jul 2012, Priority No. (21) 11/991559;(30) FI 20055479

    Research output: PatentScientific

  38. Published

    Development of Controllers Using Simulink and Contract-Based Design. Chapter 8

    Boström, P., Huova, M., Olszewska, M., Linjama, M., Heikkilä, M., Sere, K. & Walden, M., 2011, Dependability and Computer Engineering: Concepts for Software-Intensive Systems. Petre, L., Sere, K. & Troubitsyna, E. (eds.). Hershey, PA: IGI Global, p. 151-169

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  39. Published

    Digitaalihydrauliikan kuulumiset

    Linjama, M., 2008, In : Fluid Finland. 2, p. 8-10

    Research output: Contribution to journalArticleProfessional

  40. Published

    Digitaalihydrauliikan seminaarin satoa Tampereella

    Linjama, M., 2013, In : Fluid Finland. 12, 1, p. 8-8 1 p.

    Research output: Contribution to journalArticleProfessional

  41. Published

    Digitaalihydrauliikan seminaarin suosio yllätti

    Linjama, M., 2008, In : Fluid Finland. 3, p. 36-37

    Research output: Contribution to journalArticleProfessional

  42. Published

    Digitaalihydrauliikka

    Linjama, M., 2006, In : Fluid Finland. 5, 1, p. 14-19

    Research output: Contribution to journalArticleProfessional

  43. Published

    Digitaalihydrauliikka tulee!

    Linjama, M., 2010, In : Metsäalan ammattilehti. 5, p. 88-89

    Research output: Contribution to journalArticleProfessional

  44. Published

    Digitaalihydrauliikka voi tulevaisuudessa korvata analogiventtiilit

    Linjama, M. & Vilenius, M., 2002, In : Metsä Forest, Hydrauliikka-liite. 1/2002, p. 1 s

    Research output: Contribution to journalArticleProfessional

  45. Published

    Digitaalisen mikrohydrauliikan sovellussatoa

    Linjama, M., 2009, In : Fluid Finland. 2/2009, p. 30-31

    Research output: Contribution to journalArticleProfessional

  46. Published

    Digital flow control unit-an alternative for a proportional valve?

    Laamanen, A., Siivonen, L., Linjama, M. & Vilenius, M., 2004, Bath Workshop on Power Transmission and Motion Control (PTMC 2004). p. 297-308

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  47. Published

    Digital flow control unit for controlling amount of water used for binding dust

    Laamanen, A., Anttonen, P. & Linjama, M., 2010, Proceedings of the Third Workshop on Digital Fluid Power, October 13-14 2010, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). p. 119-128

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  48. Published

    Digital fluid power - state of the art

    Linjama, M., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Sairala, H. & Koskinen, K. T. (eds.). Tampere: Scandinavian International Conference on Fluid Power, p. 331-354 (Scandinavian International Conference on Fluid Power SICFP; vol. 12, no. 3).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  49. Published

    Digital hydraulic control of a mobile machine joint actuator mockup

    Linjama, M. & Vilenius, M., 2004, Bath Workshop on Power Transmission and Motion Control (PTMC 2004). p. 145-158

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  50. Published

    Digital hydraulic multi-pressure actuators - simulation study of a forwarder crane

    Heikkilä, M., Huova, M. & Linjama, M., 28 Feb 2019, The 10th Workshop on Digital Fluid Power : February 28th - March 1st, 2019, Linz, Austria. Linz Center of Mechatronics, 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

Previous 1 2 3 4 Next

ID: 39448