Tampere University of Technology

TUTCRIS Research Portal

Matti Linjama

  1. Published

    Fundamentals of Digital Microhydraulic

    Linjama, M., 2012, Proceedings of the 8th International Fluid Power Conference, Dresden, March 26-28, 2012. Dresden: Technische Universität Dresden, Institute of Fluid Power, p. 385-396 (International Fluid Power Conference; vol. 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  2. Published

    Guidelines for design of low-pressure water hydraulic systems

    Linjama, M., Laamanen, A., Koskinen, K. T. & Vilenius, M., 2001, Tampere: Tampere University of Technology. 62 p. (Tampere University of Technology, IHA, report; no. 85)

    Research output: Book/ReportCommissioned reportProfessional

  3. Published

    Hardware-in-the-loop environment for servo system controller design, tuning and testing

    Linjama, M., Virvalo, T., Gustafsson, J., Lintula, J., Aaltonen, V. & Kivikoski, M., 2000, In : Microprocessors and Microsystems. 24, 1, p. 13-23

    Research output: Contribution to journalArticleScientificpeer-review

  4. Published

    Hardware-in-the-Loop simulation applied on distributed control of hydraulic cylinder drives

    Linjama, M., Virvalo, T., Aaltonen, V. & Kivikoski, M., 2000, 2. Internationales Fluidtechnisches Kolloquium in Dresden, 16.-17.3.2000, Dresden, Germany. Conference Book.. Dresden, p. 425-435

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  5. Published

    High flowrate digital hydraulic valve system

    Ketonen, M. & Linjama, M., 7 Sep 2017, The Ninth Workshop on Digital Fluid Power.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  6. Published

    High-Linear Digital Hydraulic Valve Control by an Equal Coded Valve System and Novel Switching Schemes

    Paloniitty, M. & Linjama, M., 2018, In : Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering. 232, 3, p. 258-269

    Research output: Contribution to journalArticleScientificpeer-review

  7. Published

    High performance digital hydraulic servo system for linear cyclic motion

    Ahola, V., Linjama, M. & Vilenius, M., 2007, The Tenth Scandinavian International Conference on Fluid Power, May 21-23, 2007, Tampere, Finland, SICFP'07. Vilenius, J. & Koskinen, K. T. (eds.). Tampere: Tampere University of Technology, p. 275-287

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  8. Published

    High-Performance Digital Hydraulic Tracking Control of a Mobile Boom Mockup

    Linjama, M., Huova, M., Karhu, O. & Huhtala, K., Mar 2016, 10th International Fluid Power Conference (10. IFK) . Dresden, Vol. 1. 12 p. A-1

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  9. Published

    High-precision On/Off position control of low-pressure water hydraulic cylinder

    Linjama, M., Oshima, S., Koskinen, K. T. & Vilenius, M., 2001, The Seventh Scandinavian International Conference on Fluid Power, SICFP´01, Linköping, Sweden, May 30 - June 1, 2001. p. 41-54

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  10. Published

    High-Speed On/Off Position Control of a Low-Pressure Water Hydraulic Cylinder Drive

    Linjama, M., Sairiala, H., Koskinen, K. T. & Vilenius, M., 2002, Proceedings of the 49th National Conference on Fluid Power, March 19-21, 2002, Las Vegas, USA. USA, p. 217-225

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  11. Published

    High-Speed On/Off Position Control of a Low-Pressure Water Hydraulic Cylinder Drive

    Linjama, M., Sairiala, H., Koskinen, K. T. & Vilenius, M., 2002, In : SAE Technical Papers. p. 8 s

    Research output: Contribution to journalArticleScientificpeer-review

  12. Published

    Hydraulic Energy Recovery in Displacement Controlled Digital Hydraulic System

    Heikkilä, M. & Linjama, M., 2013, Proceedings of the 13th Scandinavian International Conference on Fluid Power, 3-5 June, Linköping, Sweden. Scandinavian International Conference on Fluid Power, p. 1-7 7 p. (Scandinavian International Conference on Fluid Power).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  13. Published

    Hydraulic Hybrid Actuator: Theoretical Aspects and Solution Alternatives

    Linjama, M., Huova, M., Pietola, M., Juhala, J. & Huhtala, K., May 2015, Proceedings of the Fourteenth Scandinavian International Conference on Fluid Power. Laamanen, A., Huhtala, K. & Uusi-Heikkilä, J. (eds.). Tampere: Tampere University of Technology, 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  14. Published

    Hydraulic hybrids

    Linjama, M., 2011, GIM - Generic Intelligent Machines, The 4th GIM Scientific Workshop, January 18-19, 2011, Tampere University of Technology, Tampere, Finland. Tampere: Tampere University of Technology, p. 1-1 1 p. (GIM Scientific Workshop; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  15. Published

    Hydrauliikan aika ei ole ohi - The time of hydraulics is not over

    Linjama, M., 2012, In : Fluid Finland. 11, 2, p. 10-12

    Research output: Contribution to journalArticleProfessional

  16. Published

    Improved digital hydraulic tracking control of water hydraulic cylinder drive

    Linjama, M. & Vilenius, M., 2005, In : International Journal of Fluid Power. 6, 1, p. 29-39

    Research output: Contribution to journalArticleScientificpeer-review

  17. Published

    Improving characteristics of on/off solenoid valves

    Mikkola, J., Ahola, V., Lauttamus, T., Luomaranta, M., Linjama, M. & Vilenius, M., 2007, The Tenth Scandinavian International Conference on Fluid Power, May 21-23, 2007, Tampere, Finland, SICFP'07. Vilenius, J. & Koskinen, K. T. (eds.). Tampere: Tampere University of Technology, p. 343-353

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  18. Published

    Improving damping characteristics of displacement controlled digital hydraulic system

    Heikkilä, M. & Linjama, M., 2012, DFP 12, Proceedings of the fifth workshop on digital fluid power, October 24-25, 2012, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). Tampere: Tampere University of Technology. Department of Intellidgent Hydraulics and Automation, p. 75-88 (Workshop on digital fluid power).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  19. Published

    Inspections on Control Performance of a Digital Hydraulic Power Management System Supplying Digital and Proportional Valve Driven Multi-Actuator System

    Karvonen, M., Heikkilä, M., Huova, M., Linjama, M. & Huhtala, K., 2014, Conference Proceedings, 9th International Fluid Power Conference, 24th - 26th March, Aachen, Germany, Modern Fluid Power - Challenges, Responsibilities, Markets, Vol. 1. Murrenhoff, H. (ed.). Aachen: Hp - Fördervereinigung Fluidtechnik E.v., p. 531-541 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  20. Published

    Is it time for digital hydraulics?

    Linjama, M., Laamanen, A. & Vilenius, M., 2003, The Eight Scandinavian International Conference on Fluid Power, Proceedings of the Conference, May 7-9, 2003, Tampere, Finland, SICFP´03. Koskinen, K. T. & Vilenius, M. (eds.). Tampere: Tampere University of Technology, p. 347-366

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  21. Published

    Is the future of fluid power digital?

    Scheidl, R., Linjama, M. & Schmidt, S., 2012, In : Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering. 226, 6, p. 721-723

    Research output: Contribution to journalArticleScientificpeer-review

  22. Published

    ITER divertor maintenance: Development of a control system for the remote handling of the divertor cassette mover

    Esque, S., Saarinen, H., Muhammad, A., Zhai, L., Tammisto, J., Seppälä, J., Mattila, J., Virvalo, T., Linjama, M. & Vilenius, M., 2007, Proceedings of the 22nd IEEE/NPSS Symposium on Fusion Engineering - SOFE 07, June 17-21, Albuquerque, New Mexico, USA. p. 6 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  23. Published

    Jammed on/off valve fault compensation with distributed digital valve system

    Siivonen, L., Linjama, M., Huova, M. & Vilenius, M., 2009, In : International Journal of Fluid Power. 10, 2, p. 73-82

    Research output: Contribution to journalArticleScientificpeer-review

  24. Published

    Laitteisto, ohjauspiiri ja menetelmä paineen ja tilavuusvirran tuottamiseksi

    Linjama, M., Tammisto, J., Huhtala, K. & Vilenius, M., 2010, Patent No. Pat. FI 121090 B, Priority date 30 Jun 2010, Priority No. (21) FI 20085242

    Research output: PatentScientific

  25. Published

    Laminated manifold for digital hydraulics - principles, challenges and benefits

    Paloniitty, M., Karvonen, M., Linjama, M. & Tiainen, T., 2012, DFP 12, Proceedings of the fifth workshop on digital fluid power, October 24-25, 2012, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). Tampere: Tampere University of Technology. Department of Intellidgent Hydraulics and Automation, p. 27-42 (Workshop on digital fluid power).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  26. Published

    Low-cost proportional valve for low-pressure water hydraulics

    Sairiala, H., Linjama, M., Koskinen, K. T. & Vilenius, M., 2001, Bath Workshop on Power Transmission and Motion Control (PTMC 2001). Burrows, C. R. & Edge, K. A. (eds.). p. 135-145

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  27. Published

    Low-order dynamic model for flexible hydraulic cranes

    Linjama, M. & Virvalo, T., 1999, In : Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering. 213, I1, p. 11-22

    Research output: Contribution to journalArticleScientificpeer-review

  28. Published

    Low-order robust controller for flexible hydraulic manipulators

    Linjama, M. & Virvalo, T., 2005, Bath Workshop on Power Transmission and Motion Control (PTMC 2005), 7-9 September 2005. Johnston, D. N., Burrows, C. R. & Edge, K. A. (eds.). p. 29-43

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  29. Published

    Low-Pressure Water Hydraulic Component Tests, Part I

    Myllykylä, J., Laakso, M., Lakkonen, M., Liukkunen, T., Tammisto, J., Einola, K., Soini, S., Linjama, M., Koskinen, K. T. & Vilenius, M., 1999, Tampere: Tampere University of Technology. 68 p. (Tampere University of Technology, Institute of Hydraulics and Automation, IHA, Report; no. 76)

    Research output: Book/ReportCommissioned reportProfessional

  30. Published

    Low-pressure water hydraulics vs. pneumatics - performance, efficiency and investments, a case study

    Linjama, M., Mäkinen, E., Virvalo, T. & Koskinen, K. T., 2003, The Eight Scandinavian International Conference on Fluid Power, Proceedings of the Conference, May 7-9, 2003, Tampere, Finland, SICFP´03. Koskinen, K. T. & Vilenius, M. (eds.). Tampere: Tampere University of Technology, p. 1003-1019

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  31. Published

    Matkaraportti: Digitaalihydrauliikan seminaari marraskuisessa Linzissä

    Linjama, M., 2010, In : Fluid Finland. 1/2010, p. 12-14

    Research output: Contribution to journalArticleScientific

  32. Published

    Measured characteristics of an in-line pump with independently controlled pistons

    Tammisto, J., Huova, M., Heikkilä, M., Linjama, M. & Huhtala, K., 2010, 7th International Fluid Power Conference (7th IFK), 22-24 March 2010, Aachen, Germany. p. 1-12 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  33. Published

    Mechatronic design of digital hydraulic micro valve package

    Linjama, M., Paloniitty, M., Tiainen, L. & Huhtala, K., 2014, The Second International Conference on Dynamics and Vibroacoustics of Machines, September 15-17, 2014, Samara, Russia. p. 610-617 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  34. Published

    Mechatronic Design of Digital Hydraulic Micro Valve Package

    Linjama, M., Paloniitty, M., Tiainen, L. & Huhtala, K., 2015, Procedia Engineering. Elsevier Ireland Ltd, Vol. 106. p. 97-107 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  35. Published

    Miniaturized bistable seat valve

    Uusitalo, J-P., Lauttamus, T., Linjama, M., Söderlund, L., Vilenius, M. & Kettunen, L., 2007, The Tenth Scandinavian International Conference on Fluid Power, May 21-23, 2007, Tampere, Finland, SICFP'07. Vilenius, J. & Koskinen, K. T. (eds.). Tampere: Tampere University of Technology, p. 379-391

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  36. Published

    Model-based control of a digital hydraulic transformer-based hybrid actuator

    Linjama, M., 2018, BATH/ASME 2018 Symposium on Fluid Power and Motion Control, FPMC 2018. ASME

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  37. Published

    Model-based force and position tracking control of a multi-pressure hydraulic cylinder

    Linjama, M. & Huova, M., Jan 2018, In : Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering. 232, 3, p. 324-335

    Research output: Contribution to journalArticleScientificpeer-review

  38. Published

    Model-based force and position tracking control of an asymmetric cylinder with a digital hydraulic valve

    Linjama, M., Huova, M. & Huhtala, K., 1 Sep 2016, In : International Journal of Fluid Power. 17, 3, p. 163-172

    Research output: Contribution to journalArticleScientificpeer-review

  39. Published

    Model-based pressure control with digital valve system

    Linjama, M. & Lahtinen, J., 2011, The Fourth Workshop on Digital Fluid Power, 21st-22nd November, 2011, Linz, Austria. Linz: DFP-Workshops, p. 26-38 (Workshop on Digital Fluid Power; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  40. Published

    Modeling of interaction between hydraulic circuit and flexible robot mechanism

    Linjama, M. & Virvalo, T., 1998, Proceedings - The Fourth International Conference on Motion and Vibration Control MOVIC, August 25-28, 1998, ETH Zurich, Switzerland. Schweitzer, G. (ed.). p. 1115-1120

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  41. Published

    Modelling of a flexible hydraulic crane

    Linjama, M. & Virvalo, T., 1997, The Fifth Scandinavian International Conference on Fluid Power, SICFP 97, Linköping, Sweden, 28-30 May 1997. p. 33-48

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  42. Published

    Modelling of a Water Hydraulic Poppet Valve Using CFD Technique

    Leino, T., Linjama, M., Koskinen, K. T. & Vilenius, M., 2002, Proceedings of the 2nd International FPNI PhD Symposium on Fluid Power, Modena, Italy, July 3-6, 2002. Italy, p. 4 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  43. Published

    Modelling of Flexible Hydraulic Manipulators

    Linjama, M., 1996, Tampere: Tampere University of Technology. 25 p. (Tampere University of Technology, Institute of Hydraulics and Automation, IHA, Report; no. 51)

    Research output: Book/ReportCommissioned reportProfessional

  44. Published

    Modelling of flow characteristics of on/off valves

    Linjama, M., Huova, M. & Karvonen, M., 2012, DFP 12, Proceedings of the fifth workshop on digital fluid power, October 24-25, 2012, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). Tampere: Tampere University of Technology, Department of Intelligent Hydraulics and Automation, p. 209-222 (Workshop on digital fluid power).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  45. Published

    Motion control of low-pressure water hydraulic systems

    Linjama, M., Tammisto, J., Sairiala, H., Koskinen, K. & Vilenius, M., 2001, Tampere: Tampere University of Technology. 91 p. (Tampere University of Technology, IHA, report; no. 83)

    Research output: Book/ReportCommissioned reportProfessional

  46. Published

    New alternative for digital pump-motor-transformer

    Linjama, M. & Tammisto, J., 2009, Proceedings of The Second Workshop on Digital Fluid Power, 12-13 November 2009, Linz, Austria. Scheidl, R. & Winkler, B. (eds.). p. 49-61

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  47. Published

    New energy efficient solutions to mobile machines

    Huhtala, K., Ahopelto, M., Heikkilä, M., Backas, J., Tammisto, J., Huova, M. & Linjama, M., 2013, The 8th International Conference on Fluid Power Transmission and Control, ICFP 2013, April 9-11, 2013, Zhejiang University, Hangzhou, China. Yongxiang, L., Qingfeng, W., Bingfeng, J. & Jun, Z. (eds.). p. 38-52 15 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  48. Published

    Novel bistable hammer valve for digital hydraulics

    Uusitalo, J-P., Söderlund, L., Kettunen, L., Ahola, V. & Linjama, M., 2009, Proceedings of The Second Workshop on Digital Fluid Power, 12-13 November 2009, Linz, Austria. Scheidl, R. & Winkler, B. (eds.). p. 33-48

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  49. Published

    Novel bistable hammer valve for digital hydraulics

    Uusitalo, J-P., Ahola, V., Söderlund, L., Linjama, M., Juhola, M. & Kettunen, L., 2010, In : International Journal of Fluid Power. 11, 3, p. 35-44

    Research output: Contribution to journalArticleScientificpeer-review

  50. Published

    Novel fine positioning method for hydraulic drives utilizing on/off-valves

    Huova, M., Linjama, M., Siivonen, L., Deubel, T., Försterling, H. & Stamm, E., 14 Sep 2018, Proceedings of the BATH/ASME 2018 Symposium on Fluid Power and Motion Control FPMC2018: Bath, UK, September 12-14, 2018. ASME, 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

ID: 39448