Tampere University of Technology

TUTCRIS Research Portal

Matti Linjama

  1. Doctoral thesis › Collection of Articles
  2. Published

    The Modeling and Actuator Space Control of Flexible Hydraulic Cranes

    Linjama, M., 1998, Helsinki: The Finnish Academy of Technology. 110 p. (Acta Polytechnica Scandinavica, Me; no. 129)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  3. Commissioned report › Professional
  4. Published

    Aseman säätö hydraulisissa puomeissa

    Linjama, M., 1996, Tampere: Tampere University of Technology. 34 p. (Tampere University of Technology, Institute of Hydraulics and Automation, IHA, Report; no. 50)

    Research output: Book/ReportCommissioned reportProfessional

  5. Published

    Digital Microhydraulics

    Laamanen, A. & Linjama, M., 2014, Tampere: FIMECC Oy. 4 p. (FIMECC Publications Series; no. 2)

    Research output: Book/ReportCommissioned reportProfessional

  6. Published

    Feasibility study of existing low-pressure water hydraulic components

    Laakso, M., Myllykylä, J., Tammisto, J., Linjama, M., Koskinen, K. T. & Vilenius, M., 1999, Tampere: Tampere University of Technology. 23 p. (Tampere University of Technology, Institute of Hydraulics and Automation, IHA, Report; no. 73)

    Research output: Book/ReportCommissioned reportProfessional

  7. Published

    Guidelines for design of low-pressure water hydraulic systems

    Linjama, M., Laamanen, A., Koskinen, K. T. & Vilenius, M., 2001, Tampere: Tampere University of Technology. 62 p. (Tampere University of Technology, IHA, report; no. 85)

    Research output: Book/ReportCommissioned reportProfessional

  8. Published

    Low-Pressure Water Hydraulic Component Tests, Part I

    Myllykylä, J., Laakso, M., Lakkonen, M., Liukkunen, T., Tammisto, J., Einola, K., Soini, S., Linjama, M., Koskinen, K. T. & Vilenius, M., 1999, Tampere: Tampere University of Technology. 68 p. (Tampere University of Technology, Institute of Hydraulics and Automation, IHA, Report; no. 76)

    Research output: Book/ReportCommissioned reportProfessional

  9. Published

    Modelling of Flexible Hydraulic Manipulators

    Linjama, M., 1996, Tampere: Tampere University of Technology. 25 p. (Tampere University of Technology, Institute of Hydraulics and Automation, IHA, Report; no. 51)

    Research output: Book/ReportCommissioned reportProfessional

  10. Published

    Motion control of low-pressure water hydraulic systems

    Linjama, M., Tammisto, J., Sairiala, H., Koskinen, K. & Vilenius, M., 2001, Tampere: Tampere University of Technology. 91 p. (Tampere University of Technology, IHA, report; no. 83)

    Research output: Book/ReportCommissioned reportProfessional

  11. Published

    On/off position control of low-pressure water hydraulic cylinder with two-way solenoid valves

    Linjama, M., Koskinen, K. T. & Vilenius, M., 2000, Tampere: Tampere University of Technology. 34 p. (Tampere University of Technology, Institute of Hydraulics and Automation, IHA, report; no. 78)

    Research output: Book/ReportCommissioned reportProfessional

  12. Published

    Opas markkinatiedon lähteille

    Linjama, M., 1993, Tampere: Tampereen teknillinen korkeakoulu. 69 p. (Tampereen teknillinen korkeakoulu, Teollisuustalous, Raportteja ja työpapereita; no. 1/1993)

    Research output: Book/ReportCommissioned reportProfessional

  13. Published

    Two physical phenomena in water hydraulic systems

    Leino, T., Linjama, M., Koskinen, K. & Vilenius, M., 2001, Tampere: Tampere University of Technology. 44 p. (Tampere University of Technology, IHA, report; no. 82)

    Research output: Book/ReportCommissioned reportProfessional

  14. Anthology › Professional
  15. Published

    Proceedings of the Eighth Workshop on Digital Fluid Power (DFP16): May 24-25 2016, Tampere, Finland

    Uusi-Heikkilä, J. (ed.) & Linjama, M. (ed.), 28 Nov 2016, Tampere University of Technology. Department of Intellidgent Hydraulics and Automation. 275 p.

    Research output: Book/ReportAnthologyProfessional

  16. Anthology › Scientific › Peer-reviewed
  17. Published

    Proceedings of the fifth workshop on digital fluid power, October 24-25, 2012, Tampere, Finland

    Laamanen, A. (ed.) & Linjama, M. (ed.), 2012, Tampere: Tampere University of Technology. Department of Intellidgent Hydraulics and Automation.

    Research output: Book/ReportAnthologyScientificpeer-review

  18. Published

    Proceedings of the First Workshop on Digital Fluid Power 3rd October, 2008 Tampere, Finland

    Linjama, M. (ed.) & Laamanen, A. (ed.), 2008, Tampere University of Technology.

    Research output: Book/ReportAnthologyScientificpeer-review

  19. Published

    Proceedings of the Third Workshop on Digital Fluid Power, October 13-14 2010, Tampere, Finland

    Laamanen, A. (ed.) & Linjama, M. (ed.), 2010, Tampere: Tampere University of Technology.

    Research output: Book/ReportAnthologyScientificpeer-review

  20. Other contribution › Scientific › Not peer-reviewed
  21. Published

    Compact and efficient implementation of a pressurized tank line

    Paloniitty, M., Linjama, M. & Huova, M., 7 Nov 2018, 4 p.

    Research output: Other contributionScientific

  22. Patent › Scientific
  23. Published

    A control system and a method for controlling an actuator and for optimizing the control by means of sets of valves coupled in parallel

    Linjama, M., 2006, Patent No. Pat. EP 1386083 B1, Priority date 30 Aug 2006, Priority No. (21) 02716861.6 (30) FI 20010827

    Research output: PatentScientific

  24. Published

    Detecting of faults in a valve system and a fault tolerant control

    Siivonen, L. & Linjama, M., 2012, Patent No. Pat. US 8215227 B2, Priority date 10 Jul 2012, Priority No. (21) 11/991559;(30) FI 20055479

    Research output: PatentScientific

  25. Published

    Digital Hydraulic System

    Sipola, A., Vihtanen, H-P., Linjama, M. & Laamanen, A., 2014, Patent No. Australian Patent Office, AU 2009300985 B2, Priority date 8 May 2014, Priority No. (31) 20085958 : (21) 2009300985

    Research output: PatentScientific

  26. Published

    Laitteisto, ohjauspiiri ja menetelmä paineen ja tilavuusvirran tuottamiseksi

    Linjama, M., Tammisto, J., Huhtala, K. & Vilenius, M., 2010, Patent No. Pat. FI 121090 B, Priority date 30 Jun 2010, Priority No. (21) FI 20085242

    Research output: PatentScientific

  27. Published

    Verfahren und hydraulische Steueranordnung zur Ansteuerung eines Verbrauchers

    Stamm, E., Försterling, H., Huova, M., Siivonen, L. & Linjama, M., 2 Oct 2013, Patent No. DE 102012006219 A1

    Research output: PatentScientific

  28. Paper, poster or abstract › Scientific
  29. Published

    Fast switching valve for low-pressure water hydraulics

    Heikkilä, M., Paloniitty, M. & Linjama, M., 8 Sep 2017. 9 p.

    Research output: Other conference contributionPaper, poster or abstractScientific

  30. Conference contribution › Professional
  31. Published

    High flowrate digital hydraulic valve system

    Ketonen, M. & Linjama, M., 7 Sep 2017, The Ninth Workshop on Digital Fluid Power.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  32. Published

    High-Performance Digital Hydraulic Tracking Control of a Mobile Boom Mockup

    Linjama, M., Huova, M., Karhu, O. & Huhtala, K., Mar 2016, 10th International Fluid Power Conference (10. IFK) . Dresden, Vol. 1. 12 p. A-1

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  33. Published

    Robust control of digital hydraulic servo actuator

    Linjama, M., 7 Sep 2017, 9th workshop on digital fluid power (DFP17). 15 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  34. Conference contribution › Scientific › Peer-reviewed
  35. Published

    Accurate flow control with digital valve system

    Siivonen, L., Linjama, M., Vilenius, M. & Anttonen, P., 2008, Proceedings of the 51st National Conference on Fluid Power March 12-14, 2008, IFPE 2008, Las Vegas, USA. p. 287-294

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  36. Published

    A miniature needle valve

    Karvonen, M., Juhola, M., Ahola, V., Söderlund, L. & Linjama, M., 2010, Proceedings of the Third Workshop on Digital Fluid Power, October 13-14 2010, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). p. 61-78

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  37. Published

    A Miniature On/Off Valve Concept for High Performance Water Hydraulics

    Paloniitty, M. & Linjama, M., 19 Oct 2017, ASME/BATH 2017 Symposium on Fluid Power and Motion Control. ASME, 8 p. FPMC2017-4254

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  38. Published

    Analysis of fault tolerance of digital hydraulic valve system

    Siivonen, L., Linjama, M. & Vilenius, M., 2005, Bath Workshop on Power Transmission and Motion Control (PTMC 2005), 7-9 September 2005. Johnston, D. N., Burrows, C. R. & Edge, K. A. (eds.). p. 133-146

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  39. Published

    Analysis of Real-Time Properties of a Digital Hydraulic Power Management System

    Boström, P., Alexeev, P., Heikkilä, M., Huova, M., Waldén, M. & Linjama, M., 2014, 19th International Conference, FMICS 2014, Florence, Italy, September 11-12, 2014.. Springer International Publishing, p. 33-47 15 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  40. Published

    Analysis of signals and power flow in a digital hydraulic multi actuator application

    Karvonen, M., Heikkilä, M., Linjama, M. & Huhtala, K., 2014, 8th FPNI Ph.D Symposium on Fluid Power, FPNI2014, June 11-13, 2014, Lappeenranta, Finland. The American Society of Mechanical Engineers ASME, p. 1-12 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  41. Published

    A New Simulation Platform for Mechanical and Hydraulic Hybrid System-Especially for Hydraulic Manipulators

    Sun, W., Linjama, M. & Virvalo, T., 2003, 1st International Conference on Computational Method in Fluid Power Technology, Methods for solving practical problems in Design and Control 26-28 November 2003, Melbourne, Australia. Stecki, J. S. (ed.). p. 271-280

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  42. Published

    A novel seat valve with reduced axial forces

    Lauttamus, T., Linjama, M., Nurmia, M. & Vilenius, M., 2006, Power Transmission and Motion Control, PTMC 2006, University of Bath, UK, 13-15 September 2006. Johnston, D. N. & Edge, K. A. (eds.). p. 415-427

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  43. Published

    A novel symmetric and bistable seat valve

    Karvonen, M., Uusitalo, J-P., Ahola, V., Linjama, M. & Vilenius, M., 2009, The 11th Scandinavian International Conference on Fluid Power SICFP'09, Linköping, Sweden, June 2-4 2009. p. 14 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  44. Published

    Aspects of the energy consumption of a digital hydraulic power management system supplying a digital and proportional valve controlled multi actuator system

    Karvonen, M., Heikkilä, M., Tikkanen, S., Linjama, M. & Huhtala, K., 2014, ASME/BATH 2014 Symposium on Fluid Power and Motion Control, FPMC2014, September 10-12, 2014, Bath, United Kingdom. The American Society of Mechanical Engineers ASME, p. 1-9 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  45. Published

    Bayesian statistical analysis for performance evaluation in real-time control systems

    Boström, P., Heikkilä, M., Huova, M., Waldèn, M. & Linjama, M., 2015, Quantitative Evaluation of Systems: 12th International Conference, QEST 2015, Madrid, Spain, September 1-3, 2015, Proceedings. Springer Verlag, Vol. 9259. p. 312-328 17 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 9259).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  46. Published

    Characteristics of a Digital Flow Control Unit with PCM Control

    Laamanen, A., Linjama, M. & Vilenius, M., 2003, 7th Triennial International Symposium on Fluid Control, Measurement and Visualization, Sorrento, Italy, August 25-28.2003. Edinburgh, UK: Optimage Ltd., Edinburgh, UK, EH10 5PJ, p. 16 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  47. Published

    Comparison of digital hydraulic and traditional servo system in demanding water hydraulic tracking control

    Linjama, M., Seppälä, J., Mattila, J. & Vilenius, M., 2008, Fluid Power and Motion Control FPMC 2008, 10-12 September 2008, Bath, UK. Johnston, D. N. & Plummer, A. R. (eds.). p. 393-403

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  48. Published

    Comparison of proportional control and displacement control using digital hydraulic power management system

    Heikkilä, M., Karvonen, M., Linjama, M., Tikkanen, S. & Huhtala, K., 2014, ASME/BATH 2014 Symposium on Fluid Power and Motion Control, FPMC2014, September 10-12, 2014, Bath, United Kingdom. The American Society of Mechanical Engineers ASME, p. 1-8 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  49. Published

    Concept of Digital Microhydraulic Valve System Utilising Lamination Technology

    Paloniitty, M., Linjama, M. & Huhtala, K., 2014, Conference Proceedings, 9th International Fluid Power Conference, 24th - 26th March, 2014, Aachen, Germany, Modern Fluid Power - Challenges, Responsibilities, Markets, Vol. 1. Murrenhoff, H. (ed.). Aachen: Hp - Fördervereinigung Fluidtechnik E.v., p. 303-313 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  50. Published

    Contract-based design in controller development and its evaluation

    Boström, P., Plaska, M., Huova, M., Linjama, M., Heikkilä, M., Sere, K. & Walden, M., 2009, Nodes 09: Nordic workshop and doctoral symposium on Dependability and security, Linköping, Sweden, April 27, 2009. Asplund, M., Nadjm-Tehrani, S. & Petre, L. (eds.). p. 21-27

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  51. Published

    Controller design of digital hydraulic flow control valve

    Huova, M., Plaska, M., Siivonen, L., Linjama, M., Walden, M., Vilenius, M. & Sere, K., 2009, The 11th Scandinavian International Conference on Fluid Power SICFP'09, Linköping, Sweden, June 2-4 2009. p. 15 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  52. Published

    Design and implementation of digital hydraulic synchronization and force control system

    Linjama, M., Hopponen, V., Ikonen, A., Rintamäki, P., Vilenius, M. & Pietola, M., 2009, The 11th Scandinavian International Conference on Fluid Power SICFP'09, Linköping, Sweden, June 2-4 2009. p. 13 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  53. Published

    Design and implementation of energy saving digital hydraulic control system

    Linjama, M., Huova, M., Boström, P., Laamanen, A., Siivonen, L., Morel, L., Walden, M. & Vilenius, M., 2007, The Tenth Scandinavian International Conference on Fluid Power, May 21-23, 2007, Tampere, Finland, SICFP'07. Vilenius, J. & Koskinen, K. T. (eds.). Tampere: Tampere University of Technology, p. 341-359

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  54. Published

    Design and validation of digital controllers for hydraulics systems

    Boström, P., Linjama, M., Morel, L., Siivonen, L. & Walden, M., 2007, The Tenth Scandinavian International Conference on Fluid Power, May 21-23, 2007, Tampere, Finland, SICFP'07. Vilenius, J. & Koskinen, K. T. (eds.). Tampere: Tampere University of Technology, p. 227-241

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  55. Published

    Digital flow control unit-an alternative for a proportional valve?

    Laamanen, A., Siivonen, L., Linjama, M. & Vilenius, M., 2004, Bath Workshop on Power Transmission and Motion Control (PTMC 2004). p. 297-308

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  56. Published

    Digital flow control unit for controlling amount of water used for binding dust

    Laamanen, A., Anttonen, P. & Linjama, M., 2010, Proceedings of the Third Workshop on Digital Fluid Power, October 13-14 2010, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). p. 119-128

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  57. Published

    Digital fluid power - state of the art

    Linjama, M., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Sairala, H. & Koskinen, K. T. (eds.). Tampere: Scandinavian International Conference on Fluid Power, p. 331-354 (Scandinavian International Conference on Fluid Power SICFP; vol. 12, no. 3).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  58. Published

    Digital hydraulic control of a mobile machine joint actuator mockup

    Linjama, M. & Vilenius, M., 2004, Bath Workshop on Power Transmission and Motion Control (PTMC 2004). p. 145-158

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  59. Published

    Digital Hydraulic Power Management System - Measured Characteristics of a Second Prototype

    Heikkilä, M., Tammisto, J., Linjama, M. & Huhtala, K., May 2016, Proceedings of the Eighth Workshop on Digital Fluid Power (DFP16) . Uusi-Heikkilä, J. & Linjama, M. (eds.). p. 69-81 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Previous 1 2 3 4 Next

ID: 39448