Tampere University of Technology

TUTCRIS Research Portal

Matti Linjama

  1. A1 Journal article-refereed
  2. E-pub ahead of print

    Variable speed digital hydraulic transformer–based servo drive

    Linjama, M., 2019, In : Proceedings of the Institution of Mechanical Engineers. Part I: Journal of Systems and Control Engineering.

    Research output: Contribution to journalArticleScientificpeer-review

  3. Published

    Model-based force and position tracking control of a multi-pressure hydraulic cylinder

    Linjama, M. & Huova, M., Jan 2018, In : Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering. 232, 3, p. 324-335

    Research output: Contribution to journalArticleScientificpeer-review

  4. Published

    High-Linear Digital Hydraulic Valve Control by an Equal Coded Valve System and Novel Switching Schemes

    Paloniitty, M. & Linjama, M., 2018, In : Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering. 232, 3, p. 258-269

    Research output: Contribution to journalArticleScientificpeer-review

  5. Published

    Digital hydraulic multi-pressure actuator – the concept, simulation study and first experimental results

    Huova, M., Aalto, A., Linjama, M., Huhtala, K., Lantela, T. & Pietola, M., 2017, In : International Journal of Fluid Power. 18, 3, p. 141-152 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  6. Published

    Model-based force and position tracking control of an asymmetric cylinder with a digital hydraulic valve

    Linjama, M., Huova, M. & Huhtala, K., 1 Sep 2016, In : International Journal of Fluid Power. 17, 3, p. 163-172

    Research output: Contribution to journalArticleScientificpeer-review

  7. Published

    Friction characteristics of a multi-chamber cylinder for digital hydraulics

    Cho, S. H., Niemi-Pynttäri, O. & Linjama, M., 2016, In : Proceedings of the institution of Mechanical Engineers Part C: Journal of Mechanical Engineering Science. 230, 5, p. 685-698 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  8. Published

    Analysis by Simulation of Different Control Algorithms of A Digital Hydraulic Two-Actuator System

    Karvonen, M., Heikkilä, M., Huova, M. & Linjama, M., 2014, In : International Journal of Fluid Power. 15, 1, p. 33-44 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  9. Published

    Displacement control of a mobile crane using a digital hydraulic power management system

    Heikkilä, M. & Linjama, M., 2013, In : Mechatronics. 23, 4, p. 452-461 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  10. Published

    Is the future of fluid power digital?

    Scheidl, R., Linjama, M. & Schmidt, S., 2012, In : Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering. 226, 6, p. 721-723

    Research output: Contribution to journalArticleScientificpeer-review

  11. Published

    Novel bistable hammer valve for digital hydraulics

    Uusitalo, J-P., Ahola, V., Söderlund, L., Linjama, M., Juhola, M. & Kettunen, L., 2010, In : International Journal of Fluid Power. 11, 3, p. 35-44

    Research output: Contribution to journalArticleScientificpeer-review

  12. Published

    Energy efficiency of three-chamber cylinder with digital valve system

    Huova, M., Laamanen, A. & Linjama, M., 2010, In : International Journal of Fluid Power. 11, 3, p. 15-22

    Research output: Contribution to journalArticleScientificpeer-review

  13. Published

    Jammed on/off valve fault compensation with distributed digital valve system

    Siivonen, L., Linjama, M., Huova, M. & Vilenius, M., 2009, In : International Journal of Fluid Power. 10, 2, p. 73-82

    Research output: Contribution to journalArticleScientificpeer-review

  14. Published

    Dynamic analysis of a bistable actuator for digital hydraulics

    Uusitalo, J-P., Söderlund, L., Kettunen, L., Linjama, M. & Vilenius, M., 2009, In : IET Science Measurement and Technology. 3, 3, p. 235-243

    Research output: Contribution to journalArticleScientificpeer-review

  15. Published

    Digital hydraulics - Towards perfect valve technology

    Linjama, M. & Vilenius, M., 2008, In : Ventil - Journal for Hydraulics, Automation and Mechatronics. 14, 2, p. 138-148

    Research output: Contribution to journalArticleScientificpeer-review

  16. Published

    Improved digital hydraulic tracking control of water hydraulic cylinder drive

    Linjama, M. & Vilenius, M., 2005, In : International Journal of Fluid Power. 6, 1, p. 29-39

    Research output: Contribution to journalArticleScientificpeer-review

  17. Published

    Accurate trajectory tracking control of water hydraulic cylinder with non-ideal on/off valves

    Linjama, M., Koskinen, K. T. & Vilenius, M., 2003, In : International Journal of Fluid Power. 4, 1, p. 7-16

    Research output: Contribution to journalArticleScientificpeer-review

  18. Published

    Proportional Position Control of Low-Pressure Water Hydraulic Cylinder

    Sairiala, H., Linjama, M., Koskinen, K. T. & Vilenius, M., 2002, In : SAE Technical Papers. p. 7 s

    Research output: Contribution to journalArticleScientificpeer-review

  19. Published

    Experimental Study on Cavitation in Water Hydraulic Poppet Valve

    Oshima, S., Leino, T., Linjama, M., Koskinen, K. T. & Vilenius, M., 2002, In : Transactions of the Japan Fluid Power System Society. 33, 2, p. 29-35

    Research output: Contribution to journalArticleScientificpeer-review

  20. Published

    High-Speed On/Off Position Control of a Low-Pressure Water Hydraulic Cylinder Drive

    Linjama, M., Sairiala, H., Koskinen, K. T. & Vilenius, M., 2002, In : SAE Technical Papers. p. 8 s

    Research output: Contribution to journalArticleScientificpeer-review

  21. Published

    Sliding mode tracking control of a low-pressure water hydraulic cylinder under non-linear friction

    Cho, S. H., Linjama, M., Sairiala, H., Koskinen, K. T. & Vilenius, M., 2002, In : Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering. 216, p. 383-392

    Research output: Contribution to journalArticleScientificpeer-review

  22. Published

    Effect of cavitation in water hydraulic poppet valves

    Oshima, S., Leino, T., Linjama, M., Koskinen, K. T. & Vilenius, M. J., 2001, In : International Journal of Fluid Power. 2, 3, p. 5-14

    Research output: Contribution to journalArticleScientificpeer-review

  23. Published

    Applicability of a laminar flow based model in pipeflow modelling of water hydraulic systems

    Leino, T., Linjama, M., Koskinen, K. T. & Vilenius, M., 2001, In : International Journal of Fluid Power. 2, 2, p. 37-46

    Research output: Contribution to journalArticleScientificpeer-review

  24. Published

    Hardware-in-the-loop environment for servo system controller design, tuning and testing

    Linjama, M., Virvalo, T., Gustafsson, J., Lintula, J., Aaltonen, V. & Kivikoski, M., 2000, In : Microprocessors and Microsystems. 24, 1, p. 13-23

    Research output: Contribution to journalArticleScientificpeer-review

  25. Published

    Low-order dynamic model for flexible hydraulic cranes

    Linjama, M. & Virvalo, T., 1999, In : Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering. 213, I1, p. 11-22

    Research output: Contribution to journalArticleScientificpeer-review

  26. A3 Part of a book or another research book
  27. Published

    Development of Controllers Using Simulink and Contract-Based Design. Chapter 8

    Boström, P., Huova, M., Olszewska, M., Linjama, M., Heikkilä, M., Sere, K. & Walden, M., 2011, Dependability and Computer Engineering: Concepts for Software-Intensive Systems. Petre, L., Sere, K. & Troubitsyna, E. (eds.). Hershey, PA: IGI Global, p. 151-169

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  28. A4 Article in a conference publication
  29. Published

    Fuel efficiency analysis of selected hydraulic hybrids in a wheel loader application

    Huova, M., Tammisto, J., Linjama, M. & Tervonen, J., 14 Sep 2018, Proceedings of the BATH/ASME 2018 Symposium on Fluid Power and Motion Control FPMC2018: Bath, UK, September 12-14, 2018. ASME, 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  30. Published

    Novel fine positioning method for hydraulic drives utilizing on/off-valves

    Huova, M., Linjama, M., Siivonen, L., Deubel, T., Försterling, H. & Stamm, E., 14 Sep 2018, Proceedings of the BATH/ASME 2018 Symposium on Fluid Power and Motion Control FPMC2018: Bath, UK, September 12-14, 2018. ASME, 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  31. Published

    Fuel efficiency optimization of a baseline wheel loader and its hydraulic hybrid variants using dynamic programming

    Heikkilä, M., Huova, M., Tammisto, J., Linjama, M. & Tervonen, J., Sep 2018, Proceedings of the BATH/ASME 2018 Symposium on Fluid Power and Motion Control FPMC2018: Bath, UK, September 12-14, 2018. ASME, 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  32. Published

    Fault-tolerant control of a multi-outlet digital hydraulic pump-motor

    Heikkilä, M. & Linjama, M., Mar 2018, Fluid power networks: Proceedings of the 11th International Fluid Power Conference, 19th-21st March 2018, Aachen. Murrenhoff, H. (ed.). Aachen University: RWTH Publications, Vol. 1. p. 145-157 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  33. Published

    Model-based control of a digital hydraulic transformer-based hybrid actuator

    Linjama, M., 2018, BATH/ASME 2018 Symposium on Fluid Power and Motion Control, FPMC 2018. ASME

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  34. Published

    A Miniature On/Off Valve Concept for High Performance Water Hydraulics

    Paloniitty, M. & Linjama, M., 19 Oct 2017, ASME/BATH 2017 Symposium on Fluid Power and Motion Control. ASME, 8 p. FPMC2017-4254

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  35. Published

    Study of Energy Losses in Digital Hydraulic Multi-Pressure Actuator

    Huova, M., Aalto, A., Linjama, M. & Huhtala, K., 8 Jun 2017, The 15th Scandinavian International Conference on Fluid Power, SICFP’17, June 7-9, 2017, Linköping, Sweden. Linköping University Electronic Press, p. 214-223 (Linköping Electronic Conference Proceedings).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  36. Published

    Simulation study of a digital hydraulic independent metering valve system on an excavator

    Ketonen, M. & Linjama, M., 7 Jun 2017, The 15th Scandinavian International Conference on Fluid Power. Linköping University Electronic Press, p. 136-146 (Linköping Electronic Conference Proceedings).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  37. Published

    Digital Hydraulic Power Management System - Measured Characteristics of a Second Prototype

    Heikkilä, M., Tammisto, J., Linjama, M. & Huhtala, K., May 2016, Proceedings of the Eighth Workshop on Digital Fluid Power (DFP16) . Uusi-Heikkilä, J. & Linjama, M. (eds.). p. 69-81 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  38. Published

    Fault Tolerance of Digital Hydraulics in High Dynamic Hydraulic System

    Siivonen, L., Linjama, M., Huova, M., Försterling, H., Stamm, E. & Deubel, T., 20 May 2015, The Fourteenth Scandinavian International Conference on Fluid Power. 1 ed. Tampere, Finland, Vol. 1. 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  39. Published

    Bayesian statistical analysis for performance evaluation in real-time control systems

    Boström, P., Heikkilä, M., Huova, M., Waldèn, M. & Linjama, M., 2015, Quantitative Evaluation of Systems: 12th International Conference, QEST 2015, Madrid, Spain, September 1-3, 2015, Proceedings. Springer Verlag, Vol. 9259. p. 312-328 17 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 9259).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  40. Published

    Equal Coded Digital Hydraulic Valve System - Improving Tracking Control with Pulse Frequency Modulation

    Paloniitty, M., Linjama, M. & Huhtala, K., 2015, Procedia Engineering. Elsevier Ireland Ltd, Vol. 106. p. 83-91 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  41. Published

    Mechatronic Design of Digital Hydraulic Micro Valve Package

    Linjama, M., Paloniitty, M., Tiainen, L. & Huhtala, K., 2015, Procedia Engineering. Elsevier Ireland Ltd, Vol. 106. p. 97-107 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  42. Published

    Retrofitting digital hydraulics – An analytical study

    Ketonen, M., Linjama, M. & Huhtala, K., 24 Mar 2014, Conference proceedings, 9th International Fluid Power Conference Aachen: Modern Fluid Power - Challenges, Responsibilities, Markets, Vol. 1. Aachen Germany, p. 163 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  43. Published

    Digital Hydraulic Power Management System with Five Independent Outlets - Simulation Study of Displacement Controlled Excavator Crane

    Heikkilä, M., Linjama, M. & Huhtala, K., 2014, Conference Proceedings, 9th International Fluid Power Conference 24th - 26th March, Aachen, Germany, Modern Fluid Power - Challenges, Responsibilities, Markets, Vol. 1. Murrenhoff, H. (ed.). Aachen: Hp - Fördervereinigung Fluidtechnik E.v., p. 455-465 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  44. Published

    Analysis of signals and power flow in a digital hydraulic multi actuator application

    Karvonen, M., Heikkilä, M., Linjama, M. & Huhtala, K., 2014, 8th FPNI Ph.D Symposium on Fluid Power, FPNI2014, June 11-13, 2014, Lappeenranta, Finland. The American Society of Mechanical Engineers ASME, p. 1-12 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  45. Published

    Analysis of Real-Time Properties of a Digital Hydraulic Power Management System

    Boström, P., Alexeev, P., Heikkilä, M., Huova, M., Waldén, M. & Linjama, M., 2014, 19th International Conference, FMICS 2014, Florence, Italy, September 11-12, 2014.. Springer International Publishing, p. 33-47 15 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  46. Published

    Comparison of proportional control and displacement control using digital hydraulic power management system

    Heikkilä, M., Karvonen, M., Linjama, M., Tikkanen, S. & Huhtala, K., 2014, ASME/BATH 2014 Symposium on Fluid Power and Motion Control, FPMC2014, September 10-12, 2014, Bath, United Kingdom. The American Society of Mechanical Engineers ASME, p. 1-8 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  47. Published

    Aspects of the energy consumption of a digital hydraulic power management system supplying a digital and proportional valve controlled multi actuator system

    Karvonen, M., Heikkilä, M., Tikkanen, S., Linjama, M. & Huhtala, K., 2014, ASME/BATH 2014 Symposium on Fluid Power and Motion Control, FPMC2014, September 10-12, 2014, Bath, United Kingdom. The American Society of Mechanical Engineers ASME, p. 1-9 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  48. Published

    Inspections on Control Performance of a Digital Hydraulic Power Management System Supplying Digital and Proportional Valve Driven Multi-Actuator System

    Karvonen, M., Heikkilä, M., Huova, M., Linjama, M. & Huhtala, K., 2014, Conference Proceedings, 9th International Fluid Power Conference, 24th - 26th March, Aachen, Germany, Modern Fluid Power - Challenges, Responsibilities, Markets, Vol. 1. Murrenhoff, H. (ed.). Aachen: Hp - Fördervereinigung Fluidtechnik E.v., p. 531-541 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  49. Published

    Mechatronic design of digital hydraulic micro valve package

    Linjama, M., Paloniitty, M., Tiainen, L. & Huhtala, K., 2014, The Second International Conference on Dynamics and Vibroacoustics of Machines, September 15-17, 2014, Samara, Russia. p. 610-617 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  50. Published

    Verification and Validation of a Pressure Control Unit for Hydraulic Systems

    Boström, P., Heikkilä, M., Huova, M., Waldén, M. & Linjama, M., 2014, 6th International Workshop, SERENE 2014, Budapest, Hungary, October 15-16, 2014. Springer International Publishing, p. 101-115 15 p. (Lecture Notes in Computer Science; vol. 8785).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  51. Published

    Equal coded digital hydraulic valve system - improving tracking control with pulse frequency modulation

    Paloniitty, M., Linjama, M. & Huhtala, K., 2014, The Second International Conference on Dynamics and Vibroacoustics of Machines, September 15-17, 2014, Samara, Russia. p. 618-626 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  52. Published

    Concept of Digital Microhydraulic Valve System Utilising Lamination Technology

    Paloniitty, M., Linjama, M. & Huhtala, K., 2014, Conference Proceedings, 9th International Fluid Power Conference, 24th - 26th March, 2014, Aachen, Germany, Modern Fluid Power - Challenges, Responsibilities, Markets, Vol. 1. Murrenhoff, H. (ed.). Aachen: Hp - Fördervereinigung Fluidtechnik E.v., p. 303-313 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  53. Published

    Parallel pump-controlled multi-chamber cylinder

    Niemi-Pynttäri, O., Linjama, M., Laamanen, A. & Huhtala, K., 2014, ASME/BATH 2014 Symposium on Fluid Power and Motion Control, FPMC2014, September 10-12, 2014, Bath, United Kingdom. The American Society of Mechanical Engineers ASME, p. 1-9 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Previous 1 2 3 4 Next

ID: 39448