Tampere University of Technology

TUTCRIS Research Portal

Matti Linjama

  1. Article › Scientific › Not peer-reviewed
  2. Published

    Discussion: Is the future of fluid power digital? Response

    Linjama, M., Scheidl, R. & Schmidt, S., 2012, In : Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering. 226, I6, p. 726-727

    Research output: Contribution to journalArticleScientific

  3. Published

    Matkaraportti: Digitaalihydrauliikan seminaari marraskuisessa Linzissä

    Linjama, M., 2010, In : Fluid Finland. 1/2010, p. 12-14

    Research output: Contribution to journalArticleScientific

  4. Article › Scientific › Peer-reviewed
  5. Published

    Accurate trajectory tracking control of water hydraulic cylinder with non-ideal on/off valves

    Linjama, M., Koskinen, K. T. & Vilenius, M., 2003, In : International Journal of Fluid Power. 4, 1, p. 7-16

    Research output: Contribution to journalArticleScientificpeer-review

  6. Published

    Analysis by Simulation of Different Control Algorithms of A Digital Hydraulic Two-Actuator System

    Karvonen, M., Heikkilä, M., Huova, M. & Linjama, M., 2014, In : International Journal of Fluid Power. 15, 1, p. 33-44 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  7. Published

    Applicability of a laminar flow based model in pipeflow modelling of water hydraulic systems

    Leino, T., Linjama, M., Koskinen, K. T. & Vilenius, M., 2001, In : International Journal of Fluid Power. 2, 2, p. 37-46

    Research output: Contribution to journalArticleScientificpeer-review

  8. Published

    Digital hydraulic multi-pressure actuator – the concept, simulation study and first experimental results

    Huova, M., Aalto, A., Linjama, M., Huhtala, K., Lantela, T. & Pietola, M., 2017, In : International Journal of Fluid Power. 18, 3, p. 141-152 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  9. Published

    Digital hydraulics - Towards perfect valve technology

    Linjama, M. & Vilenius, M., 2008, In : Ventil - Journal for Hydraulics, Automation and Mechatronics. 14, 2, p. 138-148

    Research output: Contribution to journalArticleScientificpeer-review

  10. Published

    Displacement control of a mobile crane using a digital hydraulic power management system

    Heikkilä, M. & Linjama, M., 2013, In : Mechatronics. 23, 4, p. 452-461 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  11. Published

    Dynamic analysis of a bistable actuator for digital hydraulics

    Uusitalo, J-P., Söderlund, L., Kettunen, L., Linjama, M. & Vilenius, M., 2009, In : IET Science Measurement and Technology. 3, 3, p. 235-243

    Research output: Contribution to journalArticleScientificpeer-review

  12. Published

    Effect of cavitation in water hydraulic poppet valves

    Oshima, S., Leino, T., Linjama, M., Koskinen, K. T. & Vilenius, M. J., 2001, In : International Journal of Fluid Power. 2, 3, p. 5-14

    Research output: Contribution to journalArticleScientificpeer-review

  13. Published

    Energy efficiency of three-chamber cylinder with digital valve system

    Huova, M., Laamanen, A. & Linjama, M., 2010, In : International Journal of Fluid Power. 11, 3, p. 15-22

    Research output: Contribution to journalArticleScientificpeer-review

  14. Published

    Experimental Study on Cavitation in Water Hydraulic Poppet Valve

    Oshima, S., Leino, T., Linjama, M., Koskinen, K. T. & Vilenius, M., 2002, In : Transactions of the Japan Fluid Power System Society. 33, 2, p. 29-35

    Research output: Contribution to journalArticleScientificpeer-review

  15. Published

    Friction characteristics of a multi-chamber cylinder for digital hydraulics

    Cho, S. H., Niemi-Pynttäri, O. & Linjama, M., 2016, In : Proceedings of the institution of Mechanical Engineers Part C: Journal of Mechanical Engineering Science. 230, 5, p. 685-698 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  16. Published

    Hardware-in-the-loop environment for servo system controller design, tuning and testing

    Linjama, M., Virvalo, T., Gustafsson, J., Lintula, J., Aaltonen, V. & Kivikoski, M., 2000, In : Microprocessors and Microsystems. 24, 1, p. 13-23

    Research output: Contribution to journalArticleScientificpeer-review

  17. Published

    High-Linear Digital Hydraulic Valve Control by an Equal Coded Valve System and Novel Switching Schemes

    Paloniitty, M. & Linjama, M., 2018, In : Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering. 232, 3, p. 258-269

    Research output: Contribution to journalArticleScientificpeer-review

  18. Published

    High-Speed On/Off Position Control of a Low-Pressure Water Hydraulic Cylinder Drive

    Linjama, M., Sairiala, H., Koskinen, K. T. & Vilenius, M., 2002, In : SAE Technical Papers. p. 8 s

    Research output: Contribution to journalArticleScientificpeer-review

  19. Published

    Improved digital hydraulic tracking control of water hydraulic cylinder drive

    Linjama, M. & Vilenius, M., 2005, In : International Journal of Fluid Power. 6, 1, p. 29-39

    Research output: Contribution to journalArticleScientificpeer-review

  20. Published

    Is the future of fluid power digital?

    Scheidl, R., Linjama, M. & Schmidt, S., 2012, In : Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering. 226, 6, p. 721-723

    Research output: Contribution to journalArticleScientificpeer-review

  21. Published

    Jammed on/off valve fault compensation with distributed digital valve system

    Siivonen, L., Linjama, M., Huova, M. & Vilenius, M., 2009, In : International Journal of Fluid Power. 10, 2, p. 73-82

    Research output: Contribution to journalArticleScientificpeer-review

  22. Published

    Low-order dynamic model for flexible hydraulic cranes

    Linjama, M. & Virvalo, T., 1999, In : Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering. 213, I1, p. 11-22

    Research output: Contribution to journalArticleScientificpeer-review

  23. Published

    Model-based force and position tracking control of a multi-pressure hydraulic cylinder

    Linjama, M. & Huova, M., Jan 2018, In : Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering. 232, 3, p. 324-335

    Research output: Contribution to journalArticleScientificpeer-review

  24. Published

    Model-based force and position tracking control of an asymmetric cylinder with a digital hydraulic valve

    Linjama, M., Huova, M. & Huhtala, K., 1 Sep 2016, In : International Journal of Fluid Power. 17, 3, p. 163-172

    Research output: Contribution to journalArticleScientificpeer-review

  25. Published

    Novel bistable hammer valve for digital hydraulics

    Uusitalo, J-P., Ahola, V., Söderlund, L., Linjama, M., Juhola, M. & Kettunen, L., 2010, In : International Journal of Fluid Power. 11, 3, p. 35-44

    Research output: Contribution to journalArticleScientificpeer-review

  26. Published

    Proportional Position Control of Low-Pressure Water Hydraulic Cylinder

    Sairiala, H., Linjama, M., Koskinen, K. T. & Vilenius, M., 2002, In : SAE Technical Papers. p. 7 s

    Research output: Contribution to journalArticleScientificpeer-review

  27. Published

    Sliding mode tracking control of a low-pressure water hydraulic cylinder under non-linear friction

    Cho, S. H., Linjama, M., Sairiala, H., Koskinen, K. T. & Vilenius, M., 2002, In : Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering. 216, p. 383-392

    Research output: Contribution to journalArticleScientificpeer-review

  28. Article › Professional
  29. Published

    Digitaalihydrauliikan kuulumiset

    Linjama, M., 2008, In : Fluid Finland. 2, p. 8-10

    Research output: Contribution to journalArticleProfessional

  30. Published

    Digitaalihydrauliikan seminaarin satoa Tampereella

    Linjama, M., 2013, In : Fluid Finland. 12, 1, p. 8-8 1 p.

    Research output: Contribution to journalArticleProfessional

  31. Published

    Digitaalihydrauliikan seminaarin suosio yllätti

    Linjama, M., 2008, In : Fluid Finland. 3, p. 36-37

    Research output: Contribution to journalArticleProfessional

  32. Published

    Digitaalihydrauliikka

    Linjama, M., 2006, In : Fluid Finland. 5, 1, p. 14-19

    Research output: Contribution to journalArticleProfessional

  33. Published

    Digitaalihydrauliikka tulee!

    Linjama, M., 2010, In : Metsäalan ammattilehti. 5, p. 88-89

    Research output: Contribution to journalArticleProfessional

  34. Published

    Digitaalihydrauliikka voi tulevaisuudessa korvata analogiventtiilit

    Linjama, M. & Vilenius, M., 2002, In : Metsä Forest, Hydrauliikka-liite. 1/2002, p. 1 s

    Research output: Contribution to journalArticleProfessional

  35. Published

    Digitaalisen mikrohydrauliikan sovellussatoa

    Linjama, M., 2009, In : Fluid Finland. 2/2009, p. 30-31

    Research output: Contribution to journalArticleProfessional

  36. Published

    Digital schlägt Analog um 40%

    Linjama, M., 2008, In : Fluid. 7-8/2008, p. 12-13

    Research output: Contribution to journalArticleProfessional

  37. Published

    Hydrauliikan aika ei ole ohi - The time of hydraulics is not over

    Linjama, M., 2012, In : Fluid Finland. 11, 2, p. 10-12

    Research output: Contribution to journalArticleProfessional

  38. Published

    Tavoitteena häviötön hydrauliikka

    Linjama, M., 2009, In : Fluid Finland. 3-4, p. 12-17

    Research output: Contribution to journalArticleProfessional

  39. Chapter › Scientific › Peer-reviewed
  40. Published

    Development of Controllers Using Simulink and Contract-Based Design. Chapter 8

    Boström, P., Huova, M., Olszewska, M., Linjama, M., Heikkilä, M., Sere, K. & Walden, M., 2011, Dependability and Computer Engineering: Concepts for Software-Intensive Systems. Petre, L., Sere, K. & Troubitsyna, E. (eds.). Hershey, PA: IGI Global, p. 151-169

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  41. Conference contribution › Scientific › Not peer-reviewed
  42. Published

    A computed force controller in a pneumatic position servo

    Virvalo, T., Linjama, M. & Mattila, J., 1997, New Achievements and Ideals in Fluid Power Engineering, Proceedings of the 4th International Conference on Fluid Power Transmission and Control, '97 ICFP, September 9-11, Hangzhou, China. Yongxiang, L. & Yiyuan, G. (eds.). Beijing: International Academic Publishers, p. 327-330

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  43. Published

    Adaptive on/off position control of low-pressure water hydraulic cylinder

    Linjama, M., Koskinen, K. T. & Vilenius, M., 2002, Proceedings of the 3rd International Fluid Power Conference, March 5th and 6th 2002, Aachen, Germany. p. 303-314

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  44. Published

    Analysis of multi-input multi-output nature of hydraulic cranes

    Linjama, M. & Virvalo, T., 1999, Bath Workshop on Power Transmission and Motion Control (PTMC 99), 8-10 September, 1999, Bath, United Kingdom. Burrows, C. R. & Edge, K. A. (eds.). p. 15-29

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  45. Published

    Applicability of pneumatic cylinders in low-pressure water hydraulics

    Lakkonen, M., Linjama, M., Koskinen, K. & Vilenius, M., 2000, Lubricants for Off-Highway Applications. USA: SAE International, p. 61-66

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  46. Published

    Cavitation Resistant Water Hydraulic Pressure Relief Valve

    Liukkunen, T., Nurmia, M., Linjama, M., Koskinen, K. T. & Vilenius, M., 2002, Proceedings of the 3rd International Fluid Power Conference, March 5th and 6th 2002, Aachen, Germany. p. 255-266

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  47. Published

    Characteristics of Digital Hydraulics with Commercial Controllers

    Huova, M., Ahopelto, M., Ketonen, M., Ahola, V., Linjama, M. & Huhtala, K., Feb 2015, The Seventh Workshop on Digital Fluid Power . Linz Center of Mechatronics, p. 114-128 15 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  48. Published

    Comparing different controllers of an electrohydraulic position servo

    Virvalo, T., Linjama, M. & Mattila, J., 1997, New Achievements and Ideals in Fluid Power Engineering, Proceedings of the 4th International Conference on Fluid Power Transmission and Control, '97 ICFP, September 9-11, Hangzhou, China. Yongxiang, L. & Yiyuan, G. (eds.). Beijing: International Academic Publishers, p. 215-219

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  49. Published

    Comparison of energy saving methods for loader

    Huova, M., Heikkilä, M., Linjama, M., Tikkanen, S. & Huhtala, K., 17 Oct 2018, Proceedings of the 10th Colloquium Mobile Hydraulics, MHK 2018: 16th and 17th October 2018, Brunswick, Germany.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  50. Published

    Compensation of elasticity in one-link hydraulic boom

    Linjama, M., Virvalo, T. & Vilenius, M., 1995, Proceedings of The Fourth Scandinavian International Conference on Fluid Power, September 26-29, Tampere, Finland. p. 1116-1127

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  51. Published

    Compensation of the null point drift of a hydraulic servo valve in a position servo application

    Virvalo, T. & Linjama, M., 1999, Proceedings of the 3rd International Symposium on Fluid Power Transmission and Control, September 7-9, 1999, Harbin, China. p. 259-263

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  52. Published

    Digital Hydraulics - Past and Future

    Laamanen, A., Linjama, M. & Vilenius, M., 2004, Second Arctic-Mediterranean Post Graduate Workshop on Intelligent Machines and Transport Systems Proceedings, March 13- 21, 2004, Oulu-Kiruna-Narvik. p. 6 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  53. Published

    Digital hydraulics research at IHA

    Linjama, M., 2008, Proceedings of the First Workshop on Digital Fluid Power 3rd October, 2008, Tampere, Finland. Linjama, M. & Laamanen, A. (eds.). p. 7-30

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  54. Published

    Digital microhydraulics

    Linjama, M. & Karvonen, M., 2008, Proceedings of the First Workshop on Digital Fluid Power 3rd October, 2008, Tampere, Finland. Linjama, M. & Laamanen, A. (eds.). p. 141-152

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  55. Published

    Dynamic properties of a flexible hydraulic crane

    Linjama, M. & Virvalo, T., 1997, New Achievements and Ideals in Fluid Power Engineering, Proceedings of the 4th International Conference on Fluid Power Transmission and Control, '97 ICFP, September 9-11, Hangzhou, China. Yongxiang, L. & Yiyuan, G. (eds.). Beijing: International Academic Publishers, p. 436-441

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

Previous 1 2 3 4 Next

ID: 39448