Tampere University of Technology

TUTCRIS Research Portal

Minna Kellomäki

Organisations

Education/Academic qualification

Master of Science (Technology), Materials Technology, Rock Engineering, Tampere University of Technology
Doctor of Science (Technology), Materials Technology, Rock Engineering, Tampere University of Technology

Dissertation supervision and instruction at TUT (since 2008)

Jennika Karvinen. 2018. Hydrazone Crosslinked Polysaccharide-based Hydrogels for Soft Tissue Engineering. (Supervisor and instructor to doctoral dissertation).
Sanna Turunen. 2017. Direct Laser Writing of Proteins and Synthetic Photoresists for Neuronal Cell Growth Guidance. (Supervisor and instructor to doctoral dissertation).
Anne-Marie Haaparanta. 2015. Highly Porous Freeze-Dried Composite Scaffolds for Cartilage and Osteochondral Tissue Engineering. (Supervisor and instructor to doctoral dissertation).
Jani Pelto. 2015. Applications of Biopolymer Doped Polypyrroles in Biomedical Implants and Electrical Stimulation Devices. (Supervisor and instructor to doctoral dissertation).
Niina Ahola. 2014. In Vitro Studies of Bioabsorbable and Antibiotic-Releasing Composites for the Treatment of Osteomyelitis. (Supervisor and instructor to doctoral dissertation).
Elli Käpylä. 2014. Direct Laser Writing of Polymer-Ceramic and Hydrogel Microstructures by Two-Photon Polymerization. (Supervisor and instructor to doctoral dissertation).
Kaarlo Paakinaho. 2013. Processing Derived Control of Hydrolytic Degradation and Generation of Shape-Memory in Lactide Copolymers. (Supervisor and instructor to doctoral dissertation).
Ville Ellä. 2012. Effects of Processing Parameters of P(L/D)LA 96/4 Fibers and Fibrous Products for Medical Applications. (Supervisor and instructor to doctoral dissertation).
Tiiu Niemelä. 2010. Self-Reinforced Bioceramic and Polylactide Based Composites. (Supervisor to doctoral dissertation).
Lila Nikkola. 2009. Methods for Controlling Drug Release and Development of Multidrug Releasing Materials. (Supervisor to doctoral dissertation).

Thesis supervision, examination and instruction at TUT (since 2008)

Martta Häkli. 2018. Maturation of Human Induced Pluripotent Stem Cell-Derived Cardiomyocytes Grown on Polyethylene Terephthalate Textiles. (Examiner to master's thesis).
Subarna Bhattarai. 2017. Conducting Polymers in Augmenting the Properties of Biopotential Electrodes. (Examiner to master's thesis).
Hamasa Faqhiri. 2017. Chitosan and Silica Bioactive Glass 3D Porous Composite for Tissue Engineering. (Examiner to master's thesis).
Viivi Jokinen. 2017. Reliability and Limitations of Compression Testing of Various Biomaterials. (Examiner to master's thesis).
Mart Kroon. 2017. A Comparative In Vitro Study of Cell Growth on Textile Scaffolds for Tissue Engineering Applications. (Examiner to master's thesis).
Leo Mansikkala. 2017. Enhancing the Structural Maturation and Attachment of Human Induced Pluripotent Stem Cell Derived Cardiomyocytes on Textile Surfaces. (Examiner to master's thesis).
Sonja Mäntylä. 2017. Inhibition of Fibroblast Growth Factor Receptor in FGFR3:TACC3 Fusion Positive Glioblastoma Cells. (Examiner to master's thesis).
Eetu Sorsa. 2017. Hyaluronan Hydrogels Combined with Collagen I Aimed for Corneal Regeneration. (Examiner to master's thesis).
Pauliina Ala-Vannesluoma. 2016. Moisture Absorptivity of the Poly(Lactide-co-Glycolide), and Comparison of Dehumidifying Gases. (Examiner to master's thesis).
Tuija Alanko. 2016. Synthesis of Biodegradable and Biocompatible Polymers for Drug Delivery Applications. (Examiner to master's thesis).
Anni Antniemi. 2016. Evaluation of the Feasibility of Biodegradable Polymers for Encapsulating Resonance Circuits. (Examiner to master's thesis).
Christine Gering. 2016. Functionalization of the Polysaccharide Hydrogel Gellan Gum for Improved Cell Response. (Examiner to master's thesis).
Srijana Ghimire. 2016. In Vitro and Mechanical Properties of Bioactive-Glass/Polymer Composites. (Examiner to master's thesis).
Anni Junnila. 2016. Human Induced Pluripotent Stem Cell Derived Cardiomyocytes Grown on Woven Polyethylene Terephthalate Textile. (Examiner to master's thesis).
Sanna Karjalainen. 2016. Static and Dynamic Mechanical Behavior of Biomaterials in Dry and Simulated Physiological Conditions. (Examiner to master's thesis).
Vamakshi Khati. 2016. Development of a Robust Decellularized Extracellular Matrix Bioink for 3D Bioprinting. (Examiner to master's thesis).
Aleksi Lehtoviita. 2016. Asset Management and Asset Tracking in Finnish Healthcare. (Examiner to master's thesis).
Taru Lindell. 2016. Packaging Solutions for Biodegradable Tissue Engineering Products. (Examiner to master's thesis).
Jette-Britt Naams. 2016. A Rapid Cell Culture Protocol for Screening Material Cytocompatibility. (Examiner to master's thesis).
Essi Niemi. 2016. Hydrogels for 3D Culture of Human Corneal Cells Aiming for Tissue Engineered Corneal Applications. (Examiner to master's thesis).
Panu Noppari. 2016. Shelf-life and Injectability Study of Syringes Filled With a Biodegradable Silica-Silica Composite Used in the Parenteral Administration of Pharmaceutical Agents. (Examiner to master's thesis).
Maria Toivanen. 2016. Extracellular Signals of Neuronal Networks in Restricted Culture Volumes. (Examiner to master's thesis).
Elli Tolonen. 2016. Diabeteksen hoitoa tukevien ohjelmien käytettävyys ja vaikutus omahoidon laatuun. (Usability of Diabetes Self Care Programs and their Effect on the Quality of Self Care). (Examiner to master's thesis).
Tiia Tuokko. 2016. Comparative Study of Orthopaedic Screws. (Examiner to master's thesis).
Kaisa Vuornos. 2016. Dynamic Culture of Human Adipose Stem Cells in Flow Perfusion Bioreactor. (Examiner to master's thesis).
Siyuan Deng. 2015. Water-Soluble Synthetic Biocompatible Polymer Support for a Neural Deep Probe. (Examiner to master's thesis).
Jaana Eerola. 2015. Terveydenhuollon laitteita koskevien viranomaisvaatimusten soveltaminen yliopistoympäristössä. (Regulatory Requirements Concerning Healthcare Devices and their Application in University Environment). (Examiner to master's thesis).
Ville Heinonen. 2015. Kaasukromatografisen menetelmän kehittäminen ja alustava validointi polymeerimateriaalien laktidipitoisuuden määritykseen. (Development and Initial Validation of Analytical Method for Quantitation of Lactide in Polymer Materials by Gas Chromatography). (Examiner to master's thesis).
Eevaliisa Hopeasaari. 2015. The Role of a Putative Tumor Suppressor Migration and Invasion Inhibitory Protein in Prostate Cancer. (Examiner to master's thesis).
Laura Hämäläinen. 2015. Drug Releasing Poly (Lactide-Co-Glycolide) Microparticles. (Examiner to master's thesis).
Aleksi Hänninen. 2015. Cell Seeding of Porous Polymer-Based Scaffolds with Human Adipose-Derived Stem Cells. (Examiner to master's thesis).
Hatai Jongprasitkul. 2015. Studies on Microporous Biodegradable Polymer Films. (Examiner to master's thesis).
Laura Järveläinen. 2015. Johtavat komposiittimateriaalit ja rapid prototyping. (Conductive Composite Materials and Rapid Prototyping). (Examiner to master's thesis).
Aida Khayyami. 2015. Low Temperature Sol-Gel on Polymeric Substrate. (Examiner to master's thesis).
Kristen Kurtzeborn. 2015. Expression, Purification, and Functional Analysis of an Artificial, Multispecific Protein Based on an Avidin Scaffold. (Examiner to master's thesis).
Anna-Kaisa Kyhkynen. 2015. Controlled Drug Delivery from Porous Lactide-based Polymers. (Examiner to master's thesis).
Inari Lyyra. 2015. Optimizing Polylactide Melt Spinning Using Real-Time Monitoring. (Examiner to master's thesis).
Leo Mansikkala. 2015. (Examiner to bachelor's thesis).
Anna Railanmaa. 2015. Non-Toxic Gel Electrolytes and Their Use in Printable Supercapacitors. (Examiner to master's thesis).
Linda Urbanski. 2015. Fabrication and Characterization of Collagen, Hyaluronic Acid and Chondroitin Sulfate Scaffolds for Cartilage Tissue Engineering Applications. (Examiner to master's thesis).
Nancy Yli-Hukkala. 2015. (Examiner to bachelor's thesis).
Nazanin Zanjanizadeh Ezazi. 2015. Biofunctionalization of Zirconia Based Materials by Immobilization of ALP in Tissue Engineering Application. (Examiner to master's thesis).
Elizaveta Chervyachkova. 2014. Synthetic poly(ethylene glycol)-based Hydrogel Platform for in Vitro Cell studies in 3 Dimensions. (Examiner to master's thesis).
Henna Kiilholma. 2014. Modification of Polymers for Poly(N-isopropylacrylamide) -based Hydrogels. (Examiner to master's thesis).
Tiia Marin. 2014. Valoaktivoitavien nanopartikkelien in vitro -testaus ateroskleroosiin liittyvissä solumalleissa. (In vitro Testing of Light Activated Nanoparticles for Treatment of Atherosclerosis). (Examiner to master's thesis).
Anna-Kaisa Pietiläinen. 2014. Optimal Transport Protocol for Human Retinal Pigment Epithelium Cell Transportation on Biomaterial Membrane. (Examiner to master's thesis).
Laura Salonen. 2014. Rheological and Mechanical Properties of Hydrogels. (Examiner to master's thesis).
Hanna Tevalin. 2014. (Examiner to bachelor's thesis).
Nurcin Ugur. 2014. Micro and Nano Particle Systems for Drug Delivery Applications. (Examiner to master's thesis).
Mikael Virta. 2014. The Capabilities of the Fused Deposition Modeling Machine Ultimaker and Its Adjusting for the Biomedical Research Purposes. (Examiner to master's thesis).
Paavo Väisänen. 2014. Puutislefraktioiden vaikutus puumuovikomposiittien ominaisuuksiin. (Effects of Slow Pyrolysis Derived Distillates on the Properties of Wood-Plastic Composites). (Examiner to master's thesis).
Hang Yu. 2014. Production Requirements of Polymeric Medical Devices. (Examiner to master's thesis).
Matti Kesti. 2013. Development of 3D Bioprinting Inks Based on Tandem Crosslinked Hydrogels. (Examiner to master's thesis).
Saiful Khan. 2013. Biodegradable Electronics; Materials and Current Approaches. (Examiner to master's thesis).
Janne Koivisto. 2013. Differentiation of Human Induced Pluripotent Stem Cells into Peripheral Neural Cells. (Examiner to master's thesis).
Kaisa Laine. 2013. Rotational Melt Spinning as a Manufacturing Method for Tissue Engineering Scaffolds. (Examiner to master's thesis).
Iina Lehtoviita. 2013. Application of Microfabrication Techniques for Tissue Engineering a Cardiac Conductive Device. (Examiner to master's thesis).
Helena Lähdekorpi. 2013. Adaptation and Culture of Endothelial Cells with Human Embryonic Stem Cell Derived Retinal Pigment Epithelial Cells. (Examiner to master's thesis).
Laura Power. 2013. Dynamic Compression Testing of Acellular Tissue Engineering Scaffolds in Simulated Physiological Conditions. (Examiner to master's thesis).
Mikko Sahinoja. 2013. Study of Magnesium Metal and its Alloys as Biodegradable Material for Medical and Electrical Applications. (Examiner to master's thesis).
Kirsikka Stenlund. 2013. Fabrication and Properties of Woven Structures for Biomedical Applications. (Examiner to master's thesis).
Shokoufeh Teymouri. 2013. Chemical surface modification of polyimide film for enchanced collagen immobilization and cellular interactions. (Examiner to master's thesis).
Sanni Virjula. 2013. Analysis of the Micro-Structured Scaffolds as a Three-Dimensional Growth Platform for Human Adipose Stem Cells. (Examiner to master's thesis).
Joni Vuorio. 2013. Binding of Hyaluronic Acid with Its CD44 Receptor. (Examiner to master's thesis).
Lauri Laaksonen. 2012. Establishing a Strategy for Process Control of Coating Extrusion Process. (Examiner to master's thesis).
Hanna Lähdesmäki. 2012. Developing Biodegrable Scaffolds for Articular Cartilage Repair. (Examiner to master's thesis).
Lahja Martikainen. 2012. Engineering of Nacre-Mimetic Nanocomposites via Self-Assembly. (Examiner to master's thesis).
Riikka Pohja. 2012. Biomaterials for dry eye syndrome. (Examiner to master's thesis).
Anni Sorkio. 2012. Microparticles in differentation of retinal pigment epithelial cells from human stem cells. (Examiner to master's thesis).
Sanni Toropainen. 2012. Poly(lactide-co-caprolactone)/tricalcium phosphate -composite scaffolds foamed using supercritical carbon dioxide. (Examiner to master's thesis).
Ibrahim Cengiz. 2011. Collagen/Chitosan Blend -P(L/D)LA 96/4 composite Scaffolds for Cartilage Tissue Engineering. (Examiner to master's thesis).
Miina Hämäläinen. 2011. The Effect of Biphasic Electric Current on Adult Mesenchymal Stem Cells Cultured on Polypyrrole Surface. (Examiner to master's thesis).
Olli-Pekka Kurkela. 2011. Analysis of Attachment, Proliferation and Maturation of Human Embryonic Stem Cell-Derived Retinal Pigment Epithelial Cells on Specific Substrata. (Examiner to master's thesis).
Manu Nurminen. 2011. Imaging and Analysis of P(L/D)LA 96/4 Joint Scaffold Using Computed Tomography. (Examiner to master's thesis).
Sini Poutala. 2011. The Factors Affecting the Diffusion of New Technologies for Orthopedic Surgeries. (Examiner to master's thesis).
Hanna Rajala. 2011. Cell Culture Inserts for Retinal Pigment Epithelial Cells. (Examiner to master's thesis).
Tiia Smolander. 2011. Study of Polypropylene for Use in Mobile Phones, as a Future Eco-Friendly Material. (Examiner to master's thesis).
Minna Vittaniemi. 2011. Advanced Methods for Culturing Neuronal Cells with Microstructures. (Examiner to master's thesis).
Heini Aromaa. 2010. Polykaprolaktonin ominaisuudet ja käyttö biomateriaalina. (Polycaprolactone's characteristics and use as biomaterial). (Examiner to master's thesis).
Maarit Forstén. 2010. Fibrous Non-Woven Hybrid Scaffold for Osteochondral Damage Repair. (Examiner to master's thesis).
Sanna-Kaisa Harjula. 2010. Wound healing in zebrafish model. (Examiner to master's thesis).
Anna Heiniö-Kuusisto. 2010. Materiaalien karakterisointi pH-anturisovelluksiin. (Characterizatino of Materials for pH Sensor Applications). (Examiner to master's thesis).
Maiju Hiltunen. 2010. Polypyrrolipinnoitettujen polylaktidikuitujen valmistus. (Fabrication of Polypyrrole Coated Polylactide Fibers). (Examiner to master's thesis).
Tiia Isosomppi. 2010. Hybrid Material with Hydrogel. (Examiner to master's thesis).
Doris Jansson. 2010. Development and Characterization of Chitosan-plasmid DNA Nanoparticles. (Examiner to master's thesis).
Jenni Koskela. 2010. Light-induced Biomaterial Microfabrication for Advanced Cell Culturing - A Comparative Study. (Examiner to master's thesis).
Suvi-Tuuli Laulaja. 2010. Biohajoavat polymeerikuidut ja niiden sovellukset lääketieteessä. (Bioabsorbable Polymer Fibers and Their Medical Applications). (Examiner to master's thesis).
Pia-Maria Mäenpää. 2010. Harmaakaihileikkauksessa implantoitavat tekomykiöt. (Intraocular Lenses Implanted in Cataract Surgery). (Examiner to master's thesis).
Kirsi Penttinen. 2010. Sähköstimulaation vaikutus sydänlihassolujen kasvuun kollageenigeelillä ja 2D-pinnoitteella. (Effect of electrical field stimulation on cardiomyocyte growth on collagen gel and 2D-coating). (Examiner to master's thesis).
Sari Räsänen. 2010. Information ExtractionPprocess of Glaucoma Patient Data Available Through a Hospital-Associated Biobank. (Examiner to master's thesis).
Reetta Sartoneva. 2010. Comparison of Different Lactide Based 2D Biomaterial Membranes for Urothelium Tissue Engineering Applications. (Examiner to master's thesis).
Elina Savioja. 2010. Attachment and differentation of human embryonic stem cell derived retinal pigment epithelial cells on different coating materials. (Examiner to master's thesis).
Niina Taatila. 2010. Potilasturvallisuuteen liittyvien vaaratapahtumien raportoinnin kehittäminen Pirkanmaan sairaanhoitopiirissä. (Development of the Reporting System of Adverse Events in Patient Safety in the Pirkanmaa Hospital District). (Examiner to master's thesis).
Laura Ylä-Outinen. 2010. Neuronal cell cultures on electrospun fibers. (Examiner to master's thesis).
Iina Korkka. 2009. (Examiner to bachelor's thesis).
Elli Käpylä. 2009. Two-Photon Polymerized Hybrid Polymer-Ceramic Microstructures. (Examiner to master's thesis).
Kaisa Laattala. 2009. Sarveiskalvoproteesikomposiitti polymetyylimetakrylaatista ja bioaktiivisesta lasista. (Composites of Polymethyl Methacrylate and Bioactive Glass for Keratoprosthesis Lamina). (Examiner to master's thesis).
Eeva-Maria Lahti. 2009. Degradation Studies for Poly(lactide-co-glycolide) Films with Two Drug Types. (Examiner to master's thesis).
Katri Paavilainen. 2009. Functionalisation of Chitosan Nanoparticles. (Examiner to master's thesis).
Anne Rajala. 2009. Sulakehruuprosessin optimointi polylaktidikuituja valmistettaessa. (Optimization of Melt Spinning Process for Polylactide Fibers). (Examiner to master's thesis).
Elina Sepponen. 2009. Biostabiilien pintojen biomimetisointi. (Biomimetization of Biostable Surfaces). (Examiner to master's thesis).
Aliisa Siljander. 2009. Comparison of Adipose Stem Cells from Different Species on Polymeric/Bioceramic Materials. (Examiner to master's thesis).
Deepa Subramaniyan. 2009. In vitro evaluation and elemental characterization of biodegradable composites. (Examiner to master's thesis).
Hanna Tiainen. 2009. TiO2 Scaffold for Bone Tissue Engineering Applications. (Examiner to master's thesis).
Laura Ylä-Outinen. 2009. (Examiner to bachelor's thesis).
Marta Ferreira Torres. 2008. Biocompatible and hermetic coatings for implantable electronical medical devices. (Examiner to master's thesis).
Elina Hiekkanen. 2008. Adhesion Properties of Bioactive Glass Fibres and Measurement of Fibre/Matrix Adhesion by Single Fibre Techniques. (Examiner to master's thesis).
Jussi Hietamo. 2008. (Examiner to bachelor's thesis).
Leo Hillman. 2008. Incompatible PCL/PEG Blends for Tissue Engineering Applications. (Examiner to master's thesis).
Pedro Oliveira Godinho. 2008. Long-Fibre Reinforced Bioabsorbable and Bioactive Hybrid Composites. (Examiner to master's thesis).
Noora Siro. 2008. (Examiner to bachelor's thesis).

ID: 38641