Tampere University of Technology

TUTCRIS Research Portal

Petri Vuoristo

  1. Published

    Improving the toughness of thermally sprayed Cr 3C 2-NiCr hardmetal coatings by laser post-treatment

    Janka, L., Norpoth, J., Eicher, S., Rodríguez Ripoll, M. & Vuoristo, P., 15 May 2016, In : Materials and Design. 98, p. 135-142 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  2. Published

    High Temperature 3-body Abrasive Wear of HVOF and HVAF Sprayed Cr3C2-NiCr Coatings

    Janka, L., Ripoll, M. R., Matikainen, V. & Vuoristo, P., Jan 2015, Surface Modification Technologies XXVIII : Proceedings of the Twenty Eighth International Conference on Surface Modification Technologies. Sudarshan, T. S., Vuoristo, P. & Koivuluoto, H. (eds.). Valardocs, Vol. 28. p. 67-75

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  3. Published

    Laser-induced precipitation of (W1- xCrx)2C: mixed carbide phase for improved wear resistance of thermally sprayed hardmetal coatings

    Janka, L., Norpoth, J., Tomastik, C., Matikainen, V. & Vuoristo, P., Mar 2018, In : Surface and Coatings Technology. 337, p. 177-185 31 p.

    Research output: Contribution to journalArticleScientificpeer-review

  4. Published

    Improving the high temperature abrasion resistance of thermally sprayed Cr3C2-NiCr coatings by WC addition

    Janka, L., Berger, L. M., Norpoth, J., Trache, R., Thiele, S., Tomastik, C., Matikainen, V. & Vuoristo, P., 15 Mar 2018, In : Surface and Coatings Technology. 337, p. 296-305 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  5. Published

    Structure and properties of thermally sprayed (Ti,Mo)C-NiCo Cermet Coatings

    Jouve, B., Vuoristo, P., Niemi, K., Stenberg, T. & Mäntylä, T., 1994, Tampere: Tampere University of Technology. 23 p. (Tampere University of Technology, Institute of Materials Science, Report; no. 46/1994)

    Research output: Book/ReportCommissioned reportProfessional

  6. Published

    Achieving a slippery, liquid-infused porous surface with anti-icing properties by direct deposition of flame synthesized aerosol nanoparticles on a thermally fragile substrate

    Juuti, P., Haapanen, J., Stenroos, C., Niemelä-Anttonen, H., Harra, J., Koivuluoto, H., Teisala, H., Lahti, J., Tuominen, M., Kuusipalo, J., Vuoristo, P. & Mäkelä, J. M., 2017, In : Applied Physics Letters. 110, 16, 4 p., 161603 .

    Research output: Contribution to journalArticleScientificpeer-review

  7. Published

    Fabrication of slippery, liquid-infused porous surfaces by flame based aerosol synthesis

    Juuti, P., Haapanen, J., Stenroos, C., Niemelä-Anttonen, H., Harra, J., Koivuluoto, H., Teisala, H. S., Lahti, J., Tuominen, M. T., Kuusipalo, J., Vuoristo, P. & Mäkelä, J., 2017.

    Research output: Other conference contributionPaper, poster or abstractScientific

  8. Published

    Development of thermal spray powders for improved tribological and corrosive applications and cost-effective solutions

    Kanerva, U., Lagerbom, J. & Vuoristo, P., 2007, In : International Journal of Materials and Product Technology. 28, 3, p. 377-398

    Research output: Contribution to journalArticleScientificpeer-review

  9. Published

    Properties of WC-10Co-4Cr powders and coatings made of recycled hard metal

    Kanerva, U., Kosme, K., Lagerbom, J. & Vuoristo, P., 2006, Proceedings of the 2006 International Thermal Spray Conference, ITSC2006, 15-18 May Seattle, Washington, USA. Marple, B. R. (ed.). p. 5 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  10. Published

    Mapping of stress raising in laser clad components depending on geometry and defects

    Kaplan, F. H., Alam, M. M., Tuominen, J., Vuoristo, P., Miettinen, J., Poutala, J., Näkki, J., Junkala, T., Peltola, T. & Barsoum, Z., 2014, 67the IIW Annual Assembly & International Conference, 13th-18th July, 2014 Sheraton Grande Walkerhill & W Seoul Walkerhill, Seoul, Korea. Doc.IV-1174-14. p. 1-14

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  11. Published

    Stress raising in laser clad components depending on geometry and defects

    Kaplan, A. F. H., Alam, M. M., Tuominen, J., Vuoristo, P., Miettinen, J., Poutala, J., Näkki, J., Junkula, J., Peltola, T. & Barsoum, Z., 2013, The 14th Nordic Laser Materials Processing Conference, NOLAMP 14, August 26th - 28th 2013, Gothenburg, Sweden. Kaplan, A. & Engström, H. (eds.). Luleå: Luleå University of Technology, Department of Engineering Sciences and Mathematics, p. 281-292 12 p. (Nordic Laser Materials Processing Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  12. Published

    Sähköstaattinen jauhepinnoitus

    Kellberg, T. & Vuoristo, P., 1999, Tampere: TTKK. 32 p. (Tampereen Teknillinen Korkeakoulu, Materiaaliopin laitos, Raportti; no. 21/1999)

    Research output: Book/ReportCommissioned reportProfessional

  13. Published

    Termisesti ruiskutettujen pinnoitteiden hieenvalmistuksen optimointi

    Kellberg, T., Vuoristo, P., Knuuttila, J. & Mäntylä, T., 1997, Tampere: Tampereen teknillinen korkeakoulu. 76 p. (Tampereen teknillinen korkeakoulu, Materiaaliopin laitos, Raportti; no. 26/1997)

    Research output: Book/ReportCommissioned reportProfessional

  14. Published

    Polymeeri/Keraamikomposiittipinnoitteet

    Kellberg, T., Vuoristo, P. & Mäntylä, T., 2000, Tampere: TTKK. 85 p. (Tampereen Teknillinen Korkeakoulu, Materiaaliopin laitos, Raportti; no. 14)

    Research output: Book/ReportCommissioned reportProfessional

  15. Published

    Characterization of r.f. sputter-deposited (Fe, Cr)2O3, films

    Keränen, J., Stenberg, T., Vuoristo, P. & Mäntylä, T., 1997, Proceedings of the 5th European Conference on Advanced Materilas and Processes and Applications, Materials Functionality & Design, Volume 3: Surface Engineering and Functional Materials, EUROMAT 97, Maastricht-NL, 21-23 April 1997. Sarton, L. A. J. L. & Zeedijk, H. B. (eds.). The Netherlands 1997, p. 219-222

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  16. Published

    On the Inter-Electrode Electric Insulation in an Open Cycle MHD Channel

    Kettunen, P., Vuoristo, P. & Mäntylä, T., 1985, Tampere: Tampere University of Technology. 12 p. (Tampere University of Technology, Institute of Materials Science, Report; no. 42/1985)

    Research output: Book/ReportCommissioned reportProfessional

  17. Published

    On the Interelectrode Electric Insulation in a Open Cycle MHD Channel

    Kettunen, P., Vuoristo, P. & Mäntylä, T., 1986, Proc. of International Workshop on Fossil Fuel Fired MHD Retrofit of Existing Power Stations, Organized by CNR and ILG-MHD, Roma 27.-28.1.1986. p. 143-154

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  18. Unpublished

    Characterization Of High-Velocity Single Particle Impacts On Thermally Sprayed Ceramic Coatings

    Kiilakoski, J., Lindroos, M., Matikainen, V., Apostol, N., Koivuluoto, H. & Vuoristo, P., 13 May 2015, (Unpublished) International Thermal Spray Conference & Exposition 2015.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  19. Published

    Wear Properties of Thermally Sprayed Tungsten-Carbide Coatings in Paper Machine Environments

    Kiilakoski, J., Eronen, V. & Vuoristo, P., 21 Sep 2015, In : Tribologia - Finnish Journal of Tribology. 33, 2, p. 29 35 p.

    Research output: Contribution to journalArticleScientificpeer-review

  20. Published

    Fracture Characteristics of High-Velocity Suspension Flame-Sprayed Aluminum Oxide Coatings

    Kiilakoski, J., Lutoschkin, A., Plachetta, M., Apostol, M., Koivuluoto, H., Killinger, A. & Vuoristo, P., 2016, International Thermal Spray Conference & Exposition, ITSC 2016. DVS Media GmbH, p. 466-471 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

Previous 1 2 3 4 5 6 7 8 ...26 Next

ID: 65118